[1/4] xhci: fix endpoint context tracer output

[Mathias Nyman <mathias.nyman@linux.intel.com>]

Fix incorrent values showed for max Primary stream and
Linear stream array (LSA) values in the endpoint context
decoder.

Fixes: 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.h | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e4d7d3d..d20e57b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -718,11 +718,12 @@ struct xhci_ep_ctx {
 /* bits 10:14 are Max Primary Streams */
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
-#define EP_INTERVAL(p)		(((p) & 0xff) << 16)
-#define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
-#define CTX_TO_EP_INTERVAL(p)	(((p) >> 16) & 0xff)
-#define EP_MAXPSTREAMS_MASK	(0x1f << 10)
-#define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
+#define EP_INTERVAL(p)			(((p) & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p)	(1 << (((p) >> 16) & 0xff))
+#define CTX_TO_EP_INTERVAL(p)		(((p) >> 16) & 0xff)
+#define EP_MAXPSTREAMS_MASK		(0x1f << 10)
+#define EP_MAXPSTREAMS(p)		(((p) << 10) & EP_MAXPSTREAMS_MASK)
+#define CTX_TO_EP_MAXPSTREAMS(p)	(((p) & EP_MAXPSTREAMS_MASK) >> 10)
 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
 #define	EP_HAS_LSA		(1 << 15)
 /* hosts with LEC=1 use bits 31:24 as ESIT high bits. */
@@ -2549,21 +2550,22 @@ static inline const char *xhci_decode_ep_context(u32 info, u32 info2, u64 deq,
 	u8 burst;
 	u8 cerr;
 	u8 mult;
-	u8 lsa;
-	u8 hid;
+
+	bool lsa;
+	bool hid;
 
 	esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
 		CTX_TO_MAX_ESIT_PAYLOAD(tx_info);
 
 	ep_state = info & EP_STATE_MASK;
-	max_pstr = info & EP_MAXPSTREAMS_MASK;
+	max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
 	interval = CTX_TO_EP_INTERVAL(info);
 	mult = CTX_TO_EP_MULT(info) + 1;
-	lsa = info & EP_HAS_LSA;
+	lsa = !!(info & EP_HAS_LSA);
 
 	cerr = (info2 & (3 << 1)) >> 1;
 	ep_type = CTX_TO_EP_TYPE(info2);
-	hid = info2 & (1 << 7);
+	hid = !!(info2 & (1 << 7));
 	burst = CTX_TO_MAX_BURST(info2);
 	maxp = MAX_PACKET_DECODED(info2);