From: Sinan Kaya <okaya@codeaurora.org>
To: netdev@vger.kernel.org, timur@codeaurora.org, sulrich@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Santosh Raspatur <santosh@chelsio.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 14/18] net: cxgb3: Eliminate duplicate barriers on weakly-ordered archs
Date: Fri, 16 Mar 2018 12:16:27 -0400 [thread overview]
Message-ID: <1521216991-28706-15-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1521216991-28706-1-git-send-email-okaya@codeaurora.org>
Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.
This ends up CPU observing two barriers back to back before executing the
register write.
Create a new wrapper function with relaxed write operator. Use the new
wrapper when a write is following a wmb().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/net/ethernet/chelsio/cxgb3/adapter.h | 7 +++++++
drivers/net/ethernet/chelsio/cxgb3/sge.c | 19 ++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb3/adapter.h b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
index 087ff0f..0e21e66 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/adapter.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
@@ -281,6 +281,13 @@ static inline void t3_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
writel(val, adapter->regs + reg_addr);
}
+static inline void t3_write_reg_relaxed(struct adapter *adapter, u32 reg_addr,
+ u32 val)
+{
+ CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, val);
+ writel_relaxed(val, adapter->regs + reg_addr);
+}
+
static inline struct port_info *adap2pinfo(struct adapter *adap, int idx)
{
return netdev_priv(adap->port[idx]);
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index e988caa..0baab06 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -487,7 +487,8 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
if (q->pend_cred >= q->credits / 4) {
q->pend_cred = 0;
wmb();
- t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ V_EGRCNTX(q->cntxt_id));
}
}
@@ -1058,8 +1059,8 @@ static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
}
#else
wmb(); /* write descriptors before telling HW */
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
#endif
}
@@ -1510,8 +1511,8 @@ static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
}
spin_unlock(&q->lock);
wmb();
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
return NET_XMIT_SUCCESS;
}
@@ -1554,8 +1555,8 @@ static void restart_ctrlq(unsigned long data)
spin_unlock(&q->lock);
wmb();
- t3_write_reg(qs->adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(qs->adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/*
@@ -1793,8 +1794,8 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
#endif
wmb();
if (likely(written))
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/**
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 14/18] net: cxgb3: Eliminate duplicate barriers on weakly-ordered archs
Date: Fri, 16 Mar 2018 12:16:27 -0400 [thread overview]
Message-ID: <1521216991-28706-15-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1521216991-28706-1-git-send-email-okaya@codeaurora.org>
Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.
This ends up CPU observing two barriers back to back before executing the
register write.
Create a new wrapper function with relaxed write operator. Use the new
wrapper when a write is following a wmb().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/net/ethernet/chelsio/cxgb3/adapter.h | 7 +++++++
drivers/net/ethernet/chelsio/cxgb3/sge.c | 19 ++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb3/adapter.h b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
index 087ff0f..0e21e66 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/adapter.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
@@ -281,6 +281,13 @@ static inline void t3_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
writel(val, adapter->regs + reg_addr);
}
+static inline void t3_write_reg_relaxed(struct adapter *adapter, u32 reg_addr,
+ u32 val)
+{
+ CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, val);
+ writel_relaxed(val, adapter->regs + reg_addr);
+}
+
static inline struct port_info *adap2pinfo(struct adapter *adap, int idx)
{
return netdev_priv(adap->port[idx]);
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index e988caa..0baab06 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -487,7 +487,8 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
if (q->pend_cred >= q->credits / 4) {
q->pend_cred = 0;
wmb();
- t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ V_EGRCNTX(q->cntxt_id));
}
}
@@ -1058,8 +1059,8 @@ static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
}
#else
wmb(); /* write descriptors before telling HW */
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
#endif
}
@@ -1510,8 +1511,8 @@ static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
}
spin_unlock(&q->lock);
wmb();
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
return NET_XMIT_SUCCESS;
}
@@ -1554,8 +1555,8 @@ static void restart_ctrlq(unsigned long data)
spin_unlock(&q->lock);
wmb();
- t3_write_reg(qs->adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(qs->adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/*
@@ -1793,8 +1794,8 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
#endif
wmb();
if (likely(written))
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/**
--
2.7.4
next prev parent reply other threads:[~2018-03-16 16:16 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-16 16:16 [PATCH v3 00/18] Eliminate duplicate barriers on weakly-ordered archs Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [Intel-wired-lan] [PATCH v3 01/18] i40e/i40evf: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [Intel-wired-lan] [PATCH v3 02/18] ixgbe: eliminate " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [Intel-wired-lan] [PATCH v3 03/18] igbvf: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [Intel-wired-lan] [PATCH v3 04/18] igb: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [Intel-wired-lan] [PATCH v3 05/18] ixgbevf: keep writel() closer to wmb() Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [Intel-wired-lan] [PATCH v3 06/18] ixgbevf: eliminate duplicate barriers on weakly-ordered archs Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 07/18] drivers: net: cxgb: Eliminate " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 08/18] scsi: hpsa: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [Intel-wired-lan] [PATCH v3 09/18] fm10k: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:30 ` [Intel-wired-lan] " Alexander Duyck
2018-03-16 16:30 ` Alexander Duyck
2018-03-16 16:30 ` Alexander Duyck
2018-03-16 16:33 ` Sinan Kaya
2018-03-16 16:33 ` Sinan Kaya
2018-03-16 16:33 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 10/18] net: qla3xxx: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 11/18] qlcnic: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-19 20:10 ` Chopra, Manish
2018-03-19 20:10 ` Chopra, Manish
2018-03-16 16:16 ` [PATCH v3 12/18] bnx2x: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 13/18] net: cxgb4/cxgb4vf: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya [this message]
2018-03-16 16:16 ` [PATCH v3 14/18] net: cxgb3: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 15/18] RDMA/bnxt_re: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 16/18] IB/mlx4: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 17/18] RDMA/i40iw: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 18/18] infiniband: cxgb4: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya
2018-03-16 21:05 ` Steve Wise
2018-03-16 21:05 ` Steve Wise
2018-03-16 21:05 ` Steve Wise
2018-03-16 21:46 ` Sinan Kaya
2018-03-16 21:46 ` Sinan Kaya
2018-03-16 23:05 ` Steve Wise
2018-03-16 23:05 ` Steve Wise
2018-03-16 23:05 ` Steve Wise
2018-03-17 3:40 ` Sinan Kaya
2018-03-17 3:40 ` Sinan Kaya
2018-03-17 4:03 ` Sinan Kaya
2018-03-17 4:03 ` Sinan Kaya
2018-03-17 4:25 ` Sinan Kaya
2018-03-17 4:25 ` Sinan Kaya
2018-03-17 4:30 ` Timur Tabi
2018-03-17 4:30 ` Timur Tabi
2018-03-17 13:23 ` Steve Wise
2018-03-17 13:23 ` Steve Wise
2018-03-17 13:23 ` Steve Wise
2018-03-17 13:27 ` David Miller
2018-03-17 13:27 ` David Miller
2018-03-17 15:05 ` Jason Gunthorpe
2018-03-17 15:05 ` Jason Gunthorpe
2018-03-17 18:30 ` Sinan Kaya
2018-03-17 18:30 ` Sinan Kaya
2018-03-19 1:48 ` Jason Gunthorpe
2018-03-19 1:48 ` Jason Gunthorpe
2018-03-16 22:13 ` Jason Gunthorpe
2018-03-16 22:13 ` Jason Gunthorpe
2018-03-16 23:04 ` Steve Wise
2018-03-16 23:04 ` Steve Wise
2018-03-16 23:04 ` Steve Wise
2018-03-17 4:08 ` Timur Tabi
2018-03-17 4:08 ` Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521216991-28706-15-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=santosh@chelsio.com \
--cc=sulrich@codeaurora.org \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.