From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
Fabio Estevam <fabio.estevam@nxp.com>
Subject: [PATCH 1/4] Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings"
Date: Sun, 18 Mar 2018 11:17:28 -0300 [thread overview]
Message-ID: <1521382651-10256-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@nxp.com>
This reverts commit f81d7af7957539b7808961f929f945381530acb9.
As explained by Rob Herring:
"This "fix" is wrong. Memory controllers with chip selects should have
the chip select in the unit-address. The correct fix here is you should
drop "simple-bus"."
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 6 +++---
7 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 3a09297..6341281 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -84,19 +84,19 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0 {
+ nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@100000000 {
+ nand@1,0 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
- fpga: board-control@200000000 {
+ fpga: board-control@2,0 {
compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 0a82bf9..3dc0c8e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -97,7 +97,7 @@
0x1 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
- nor@0 {
+ nor@0,0 {
compatible = "cfi-flash";
#address-cells = <1>;
#size-cells = <1>;
@@ -106,14 +106,14 @@
device-width = <1>;
};
- nand@100000000 {
+ nand@1,0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1 0x0 0x10000>;
};
- cpld: board-control@200000000 {
+ cpld: board-control@2,0 {
compatible = "fsl,ls1043ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 410dc61..434383b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -175,19 +175,19 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0 {
+ nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@100000000 {
+ nand@1,0 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
- fpga: board-control@200000000 {
+ fpga: board-control@2,0 {
compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 18d3c5b..5dc2782 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -122,14 +122,14 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nand@0 {
+ nand@0,0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x10000>;
};
- cpld: board-control@200000000 {
+ cpld: board-control@2,0 {
compatible = "fsl,ls1046ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 0b96d6d..3012805 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -116,19 +116,19 @@
3 0 0x5 0x20000000 0x00010000>;
status = "okay";
- nor@0 {
+ nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@200000000 {
+ nand@2,0 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
- fpga: board-control@300000000 {
+ fpga: board-control@3,0 {
compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
reg = <0x3 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 3d57008e..4f17601 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -99,12 +99,12 @@
2 0 0x5 0x20000000 0x00010000>;
status = "okay";
- nand@0 {
+ nand@0,0 {
compatible = "fsl,ifc-nand";
reg = <0x0 0x0 0x10000>;
};
- fpga: board-control@200000000 {
+ fpga: board-control@2,0 {
compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 5ac3412..1de6188 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -58,7 +58,7 @@
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
- nor@0 {
+ nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
@@ -67,12 +67,12 @@
device-width = <1>;
};
- nand@200000000 {
+ nand@2,0 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
- cpld@300000000 {
+ cpld@3,0 {
reg = <0x3 0x0 0x10000>;
compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
};
--
2.7.4
next reply other threads:[~2018-03-18 14:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-18 14:17 Fabio Estevam [this message]
2018-03-18 14:17 ` [PATCH 2/4] arm64: dts: ls: Remove "simple-bus" from ifc compatible Fabio Estevam
2018-03-26 22:23 ` Rob Herring
2018-03-18 14:17 ` [PATCH 3/4] Revert "dt-bindings: ifc: Fix the unit address format in the examples" Fabio Estevam
2018-03-26 22:23 ` Rob Herring
2018-03-18 14:17 ` [PATCH 4/4] dt-bindings: ifc: Remove "simple-bus" from ifc compatible string Fabio Estevam
2018-03-26 22:23 ` Rob Herring
2018-03-26 14:44 ` [PATCH 1/4] Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings" Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521382651-10256-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.