From: Sricharan R <sricharan@codeaurora.org>
To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, sboyd@codeaurora.org,
bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
absahu@codeaurora.org, marc.zyngier@arm.com
Cc: sricharan@codeaurora.org
Subject: [PATCH v3 00/13] ARM: dts: ipq: updates to enable a few peripherals
Date: Tue, 20 Mar 2018 09:28:43 +0530 [thread overview]
Message-ID: <1521518336-5467-1-git-send-email-sricharan@codeaurora.org> (raw)
[v3]
* Fixed minor comments from v2,
https://www.spinics.net/lists/arm-kernel/msg641480.html
* Added Abhishek's review tags
[v2]
* Addressed all comments from Abhishek
* Removed dk01-c2 and dk04-c5 spinand based boards
as support for spinand is not complete
* Based all patches on top of Andy's for-next branch
[V1]
* https://www.spinics.net/lists/arm-kernel/msg631318.html
Sricharan R (13):
firmware: qcom: scm: Add ipq4019 soc compatible
ARM: dts: ipq4019: Add a few peripheral nodes
ARM: dts: ipq4019: Change the max opp frequency
ARM: dts: ipq4019: Update ipq4019-dk01.1 board data
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Enable few peripherals for hk01 board
.../devicetree/bindings/firmware/qcom,scm.txt | 3 +-
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 32 ++-
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 20 ++
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 8 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 135 +++++++++++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts | 26 ++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 83 +++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 136 ++++++++++-
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 262 ++++++++++++++++++++-
drivers/firmware/qcom_scm.c | 3 +
13 files changed, 875 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/13] ARM: dts: ipq: updates to enable a few peripherals
Date: Tue, 20 Mar 2018 09:28:43 +0530 [thread overview]
Message-ID: <1521518336-5467-1-git-send-email-sricharan@codeaurora.org> (raw)
[v3]
* Fixed minor comments from v2,
https://www.spinics.net/lists/arm-kernel/msg641480.html
* Added Abhishek's review tags
[v2]
* Addressed all comments from Abhishek
* Removed dk01-c2 and dk04-c5 spinand based boards
as support for spinand is not complete
* Based all patches on top of Andy's for-next branch
[V1]
* https://www.spinics.net/lists/arm-kernel/msg631318.html
Sricharan R (13):
firmware: qcom: scm: Add ipq4019 soc compatible
ARM: dts: ipq4019: Add a few peripheral nodes
ARM: dts: ipq4019: Change the max opp frequency
ARM: dts: ipq4019: Update ipq4019-dk01.1 board data
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Enable few peripherals for hk01 board
.../devicetree/bindings/firmware/qcom,scm.txt | 3 +-
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 32 ++-
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 20 ++
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 8 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 135 +++++++++++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts | 26 ++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 83 +++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 136 ++++++++++-
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 262 ++++++++++++++++++++-
drivers/firmware/qcom_scm.c | 3 +
13 files changed, 875 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2018-03-20 3:58 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-20 3:58 Sricharan R [this message]
2018-03-20 3:58 ` [PATCH v3 00/13] ARM: dts: ipq: updates to enable a few peripherals Sricharan R
2018-03-20 3:58 ` [PATCH v3 01/13] firmware: qcom: scm: Add ipq4019 soc compatible Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 02/13] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 03/13] ARM: dts: ipq4019: Change the max opp frequency Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 04/13] ARM: dts: ipq4019: Update ipq4019-dk01.1 board data Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 7:33 ` Stephen Boyd
2018-03-20 7:33 ` Stephen Boyd
2018-03-20 11:45 ` sricharan
2018-03-20 11:45 ` sricharan at codeaurora.org
2018-03-20 14:31 ` Richard Cochran
2018-03-20 14:31 ` Richard Cochran
2018-03-21 9:10 ` sricharan
2018-03-21 9:10 ` sricharan at codeaurora.org
2018-03-21 15:07 ` Richard Cochran
2018-03-21 15:07 ` Richard Cochran
2018-03-22 13:05 ` sricharan
2018-03-22 13:05 ` sricharan at codeaurora.org
2018-03-22 21:32 ` Richard Cochran
2018-03-22 21:32 ` Richard Cochran
2018-03-23 10:25 ` sricharan
2018-03-23 10:25 ` sricharan at codeaurora.org
2018-03-29 14:37 ` Andy Gross
2018-03-29 14:37 ` Andy Gross
2018-03-29 16:32 ` Richard Cochran
2018-03-29 16:32 ` Richard Cochran
2018-03-29 16:37 ` Richard Cochran
2018-03-29 16:37 ` Richard Cochran
2018-04-02 9:58 ` sricharan
2018-04-02 9:58 ` sricharan at codeaurora.org
2018-04-06 4:55 ` Richard Cochran
2018-04-06 4:55 ` Richard Cochran
2018-04-06 13:05 ` sricharan
2018-04-06 13:05 ` sricharan at codeaurora.org
2018-04-06 15:13 ` Richard Cochran
2018-04-06 15:13 ` Richard Cochran
2018-04-06 16:08 ` sricharan
2018-04-06 16:08 ` sricharan at codeaurora.org
2018-03-20 3:58 ` [PATCH v3 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 14:32 ` Richard Cochran
2018-03-20 14:32 ` Richard Cochran
2018-03-20 3:58 ` [PATCH v3 06/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 7:34 ` Stephen Boyd
2018-03-20 7:34 ` Stephen Boyd
2018-03-20 12:10 ` sricharan
2018-03-20 12:10 ` sricharan at codeaurora.org
2018-03-20 3:58 ` [PATCH v3 07/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 10/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 11/13] ARM: dts: ipq8074: Add peripheral nodes Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 12/13] ARM: dts: ipq8074: Add pcie nodes Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 3:58 ` [PATCH v3 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board Sricharan R
2018-03-20 3:58 ` Sricharan R
2018-03-20 7:35 ` Stephen Boyd
2018-03-20 7:35 ` Stephen Boyd
2018-03-20 12:10 ` sricharan
2018-03-20 12:10 ` sricharan at codeaurora.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521518336-5467-1-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.