Patch "regulator: anatop: set default voltage selector for pcie" has been added to the 4.9-stable tree

Patch "regulator: anatop: set default voltage selector for pcie" has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    regulator: anatop: set default voltage selector for pcie

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     regulator-anatop-set-default-voltage-selector-for-pcie.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Thu Mar 22 14:40:23 CET 2018
From: Dong Aisheng <aisheng.dong@nxp.com>
Date: Wed, 12 Apr 2017 09:58:47 +0800
Subject: regulator: anatop: set default voltage selector for pcie

From: Dong Aisheng <aisheng.dong@nxp.com>


[ Upstream commit 9bf944548169f6153c3d3778cf983cb5db251a0e ]

Set the initial voltage selector for vddpcie in case it's disabled
by default.

This fixes the below warning:
20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/regulator/anatop-regulator.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -296,6 +296,11 @@ static int anatop_regulator_probe(struct
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
+		/* set the default voltage of the pcie phy to be 1.100v */
+		if (!sreg->sel && rdesc->name &&
+		    !strcmp(rdesc->name, "vddpcie"))
+			sreg->sel = 0x10;
+
 		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;


Patches currently in stable-queue which might be from aisheng.dong@nxp.com are

queue-4.9/clk-don-t-touch-hardware-when-reparenting-during-registration.patch
queue-4.9/regulator-anatop-set-default-voltage-selector-for-pcie.patch