From: ben.hutchings@codethink.co.uk (Ben Hutchings)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 00/15] Add UART support to r8a7743
Date: Tue, 10 Apr 2018 18:13:00 +0100 [thread overview]
Message-ID: <1523380380.2654.187.camel@codethink.co.uk> (raw)
In-Reply-To: <1520247731-25239-1-git-send-email-fabrizio.castro@bp.renesas.com>
I've applied this series, thanks.
Ben.
On Mon, 2018-03-05 at 11:01 +0000, Fabrizio Castro wrote:
> This series aims at adding UART support to r8a7743 by backporting
> the relevant patches from upstream.
> As per upstream, since two of the serial interfaces live on the
> camera daughter board, we rework the DT architecture to better
> accomodate all the possible HW variants.
>
> Finally, in order to get CTS/RTS to work this series backports
> fixes made by Geert some time ago.
>
> Thanks,
> Fabrizio
>
> Biju Das (1):
> ? ARM: dts: iwg20d-q7: Add chosen node
>
> Fabrizio Castro (3):
> ? ARM: dts: iwg20d-q7: Rework DT architecture
> ? ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB
> ? ARM: dts: iwg20d-q7: Add support for ttySC3
>
> Geert Uytterhoeven (11):
> ? serial: sh-sci: Update DT binding documentation for GPIO modem lines
> ? serial: sh-sci: Update DT binding documentation for dedicated RTS/CTS
> ? serial: sh-sci: Always set TIOCM_CTS in .get_mctrl() callback
> ? serial: sh-sci: Add support for GPIO-controlled modem lines
> ? serial: sh-sci: Do not open-code sci_getreg()
> ? serial: sh-sci: Add more Serial Port Register documentation
> ? serial: sh-sci: Add more Serial Port Control/Data Register
> ????documentation
> ? serial: sh-sci: Correct pin initialization on (H)SCIF
> ? serial: sh-sci: Add pin initialization for SCIFA/SCIFB
> ? serial: sh-sci: Fix support for hardware-assisted RTS/CTS
> ? serial: sh-sci: Add DT support for dedicated RTS/CTS
>
> ?.../bindings/serial/renesas,sci-serial.txt?????????|???4 +
> ?arch/arm/boot/dts/Makefile?????????????????????????|???1 +
> ?arch/arm/boot/dts/iwg20d-q7-common.dtsi????????????| 127 +++++++++++++++
> ?arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi???????????|??43 +++++
> ?arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts????|??19 +++
> ?arch/arm/boot/dts/r8a7743-iwg20d-q7.dts????????????| 100 +-----------
> ?drivers/tty/serial/Kconfig?????????????????????????|???1 +
> ?drivers/tty/serial/sh-sci.c????????????????????????| 177 ++++++++++++++++++---
> ?drivers/tty/serial/sh-sci.h????????????????????????|??24 ++-
> ?9 files changed, 365 insertions(+), 131 deletions(-)
> ?create mode 100644 arch/arm/boot/dts/iwg20d-q7-common.dtsi
> ?create mode 100644 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
> ?create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
>
--
Ben Hutchings
Software Developer, Codethink Ltd.
prev parent reply other threads:[~2018-04-10 17:13 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-05 11:01 [cip-dev] [PATCH 00/15] Add UART support to r8a7743 Fabrizio Castro
2018-03-05 11:01 ` [cip-dev] [PATCH 01/15] serial: sh-sci: Update DT binding documentation for GPIO modem lines Fabrizio Castro
2018-03-05 11:01 ` [cip-dev] [PATCH 02/15] serial: sh-sci: Update DT binding documentation for dedicated RTS/CTS Fabrizio Castro
2018-03-05 11:01 ` [cip-dev] [PATCH 03/15] serial: sh-sci: Always set TIOCM_CTS in .get_mctrl() callback Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 04/15] serial: sh-sci: Add support for GPIO-controlled modem lines Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 05/15] serial: sh-sci: Do not open-code sci_getreg() Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 06/15] serial: sh-sci: Add more Serial Port Register documentation Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 07/15] serial: sh-sci: Add more Serial Port Control/Data " Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 08/15] serial: sh-sci: Correct pin initialization on (H)SCIF Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 09/15] serial: sh-sci: Add pin initialization for SCIFA/SCIFB Fabrizio Castro
2018-03-12 16:26 ` Ben Hutchings
2018-03-15 14:33 ` Fabrizio Castro
2018-04-10 16:39 ` Ben Hutchings
2018-03-05 11:02 ` [cip-dev] [PATCH 10/15] serial: sh-sci: Fix support for hardware-assisted RTS/CTS Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 11/15] serial: sh-sci: Add DT support for dedicated RTS/CTS Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 12/15] ARM: dts: iwg20d-q7: Rework DT architecture Fabrizio Castro
2018-03-07 17:47 ` Ben Hutchings
2018-03-07 17:49 ` Ben Hutchings
2018-03-15 14:16 ` Fabrizio Castro
2018-03-15 14:08 ` Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 13/15] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 14/15] ARM: dts: iwg20d-q7: Add support for ttySC3 Fabrizio Castro
2018-03-05 11:02 ` [cip-dev] [PATCH 15/15] ARM: dts: iwg20d-q7: Add chosen node Fabrizio Castro
2018-04-10 17:13 ` Ben Hutchings [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523380380.2654.187.camel@codethink.co.uk \
--to=ben.hutchings@codethink.co.uk \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.