All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abhinav Kumar <abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	jeykumar-jfJNa2p1gH1BDgjK7y7TUQ@public.gmane.org,
	Abhinav Kumar <abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	nganji-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	chandanu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Subject: [DPU PATCH v2 1/2] drm/panel: Add Truly NT35597 panel
Date: Sat, 14 Apr 2018 00:25:12 -0700	[thread overview]
Message-ID: <1523690713-22543-1-git-send-email-abhinavk@codeaurora.org> (raw)

From: Archit Taneja <architt@codeaurora.org>

Add support for Truly NT35597 panel used
in MSM reference platforms.

Changes in v2:
- Renamed panel to truly,nt35597
- Added SPDX license
- Used endpoints instead of custom node
- Renamed and cleaned up power supplies

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
---
 .../devicetree/bindings/display/truly,nt35597.txt  |  47 ++
 drivers/gpu/drm/panel/Kconfig                      |   7 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-truly-nt35597.c        | 597 +++++++++++++++++++++
 4 files changed, 652 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/truly,nt35597.txt
 create mode 100644 drivers/gpu/drm/panel/panel-truly-nt35597.c

diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt
new file mode 100644
index 0000000..22b6f19
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt
@@ -0,0 +1,47 @@
+Truly model NT35597 1440x2560 DSI Panel
+
+Required properties:
+- compatible: should be "truly,nt35597"
+- vdda-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply
+- vdispp-supply: phandle of the regulator that provides the supply voltage
+  for positive LCD bias
+- vdispn-supply: phandle of the regulator that provides the supply voltage
+  for negative LCD bias
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+- mode-gpios: phandle of the gpio for choosing the mode of the display
+  for single DSI or Dual DSI
+  This should be low for dual DSI and high for single DSI mode
+- display-timings: Node for the Panel timings
+
+Example:
+
+	dsi@ae94000 {
+		panel@0 {
+			compatible = "truly,nt35597";
+			reg = <0>;
+			vdda-supply = <&pm8998_l14>;
+			vdispp-supply = <&lab_regulator>;
+			vdispn-supply = <&ibb_regulator>;
+			pinctrl-names = "default", "suspend";
+			pinctrl-0 = <&sde_dsi_active>;
+			pinctrl-1 = <&sde_dsi_suspend>;
+
+			reset-gpios = <&tlmm 6 0>;
+			mode-gpios = <&tlmm 52 0>;
+			display-timings {
+				timing0: timing-0 {
+					clock-frequency = <268316138>;
+					hactive = <1440>;
+					vactive = <2560>;
+					hfront-porch = <200>;
+					hback-porch = <64>;
+					hsync-len = <32>;
+					vfront-porch = <8>;
+					vback-porch = <7>;
+					vsync-len = <1>;
+				};
+			};
+		};
+	};
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 988048e..9f0c490 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -168,4 +168,11 @@ config DRM_PANEL_SITRONIX_ST7789V
 	  Say Y here if you want to enable support for the Sitronix
 	  ST7789V controller for 240x320 LCD panels
 
+config DRM_PANEL_TRULY_NT35597_WQXGA
+	tristate "Truly WQXGA"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
+	  Video Mode panel
 endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 3d2a88d..b5b4b60 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
diff --git a/drivers/gpu/drm/panel/panel-truly-nt35597.c b/drivers/gpu/drm/panel/panel-truly-nt35597.c
new file mode 100644
index 0000000..5bd5fdc
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-truly-nt35597.c
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <video/mipi_display.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_mipi_dsi.h>
+
+static const char * const regulator_names[] = {
+	"vdda",
+	"vdispp",
+	"vdispn"
+};
+
+static unsigned long regulator_enable_loads[] = {
+	62000,
+	100000,
+	100000};
+
+static unsigned long regulator_disable_loads[] = {
+	80,
+	100,
+	100};
+
+struct truly_wqxga {
+	struct device *dev;
+	struct drm_panel panel;
+
+	struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *mode_gpio;
+
+	struct backlight_device *backlight;
+	struct videomode vm;
+
+	struct mipi_dsi_device *dsi[2];
+
+	bool prepared;
+	bool enabled;
+};
+
+static inline struct truly_wqxga *panel_to_truly_wqxga(struct drm_panel *panel)
+{
+	return container_of(panel, struct truly_wqxga, panel);
+}
+
+static int truly_wqxga_power_on(struct truly_wqxga *ctx)
+{
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+		ret = regulator_set_load(ctx->supplies[i].consumer,
+				regulator_enable_loads[i]);
+		if (ret)
+			return ret;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	msleep(20);
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(20000, 20100);
+	gpiod_set_value(ctx->reset_gpio, 0);
+	usleep_range(20000, 20100);
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(50000, 50100);
+
+	/* dual port */
+	gpiod_set_value(ctx->mode_gpio, 0);
+
+	return 0;
+}
+
+static int truly_wqxga_power_off(struct truly_wqxga *ctx)
+{
+	int ret, i;
+
+	gpiod_set_value(ctx->reset_gpio, 0);
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+		ret = regulator_set_load(ctx->supplies[i].consumer,
+				regulator_disable_loads[i]);
+		if (ret)
+			return ret;
+	}
+
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int truly_wqxga_disable(struct drm_panel *panel)
+{
+	struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
+
+	if (!ctx->enabled)
+		return 0;
+
+	if (ctx->backlight) {
+		ctx->backlight->props.power = FB_BLANK_POWERDOWN;
+		backlight_update_status(ctx->backlight);
+	}
+
+	ctx->enabled = false;
+	return 0;
+}
+
+static int truly_wqxga_unprepare(struct drm_panel *panel)
+{
+	struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
+	struct mipi_dsi_device **dsis = ctx->dsi;
+	int ret = 0, i;
+
+	if (!ctx->prepared)
+		return 0;
+
+	dsis[0]->mode_flags = 0;
+	dsis[1]->mode_flags = 0;
+
+	for (i = 0; i < 2; i++)
+		if (mipi_dsi_dcs_set_display_off(dsis[i]) < 0)
+			ret = -ECOMM;
+	msleep(78);
+
+	for (i = 0; i < 2; i++)
+		if (mipi_dsi_dcs_enter_sleep_mode(dsis[i]) < 0)
+			ret = -ECOMM;
+	msleep(78);
+
+	truly_wqxga_power_off(ctx);
+
+	ctx->prepared = false;
+	return ret;
+}
+
+#define MAX_LEN	5
+struct {
+	u8 commands[MAX_LEN];
+	int size;
+} panel_cmds[] = { /* CMD2_P0 */
+		   { { 0xff, 0x20 }, 2 },
+		   { { 0xfb, 0x01 }, 2 },
+		   { { 0x00, 0x01 }, 2 },
+		   { { 0x01, 0x55 }, 2 },
+		   { { 0x02, 0x45 }, 2 },
+		   { { 0x05, 0x40 }, 2 },
+		   { { 0x06, 0x19 }, 2 },
+		   { { 0x07, 0x1e }, 2 },
+		   { { 0x0b, 0x73 }, 2 },
+		   { { 0x0c, 0x73 }, 2 },
+		   { { 0x0e, 0xb0 }, 2 },
+		   { { 0x0f, 0xae }, 2 },
+		   { { 0x11, 0xb8 }, 2 },
+		   { { 0x13, 0x00 }, 2 },
+		   { { 0x58, 0x80 }, 2 },
+		   { { 0x59, 0x01 }, 2 },
+		   { { 0x5a, 0x00 }, 2 },
+		   { { 0x5b, 0x01 }, 2 },
+		   { { 0x5c, 0x80 }, 2 },
+		   { { 0x5d, 0x81 }, 2 },
+		   { { 0x5e, 0x00 }, 2 },
+		   { { 0x5f, 0x01 }, 2 },
+		   { { 0x72, 0x11 }, 2 },
+		   { { 0x68, 0x03 }, 2 },
+		   /* CMD2_P4 */
+		   { { 0xFF, 0x24 }, 2 },
+		   { { 0xFB, 0x01 }, 2 },
+		   { { 0x00, 0x1C }, 2 },
+		   { { 0x01, 0x0B }, 2 },
+		   { { 0x02, 0x0C }, 2 },
+		   { { 0x03, 0x01 }, 2 },
+		   { { 0x04, 0x0F }, 2 },
+		   { { 0x05, 0x10 }, 2 },
+		   { { 0x06, 0x10 }, 2 },
+		   { { 0x07, 0x10 }, 2 },
+		   { { 0x08, 0x89 }, 2 },
+		   { { 0x09, 0x8A }, 2 },
+		   { { 0x0A, 0x13 }, 2 },
+		   { { 0x0B, 0x13 }, 2 },
+		   { { 0x0C, 0x15 }, 2 },
+		   { { 0x0D, 0x15 }, 2 },
+		   { { 0x0E, 0x17 }, 2 },
+		   { { 0x0F, 0x17 }, 2 },
+		   { { 0x10, 0x1C }, 2 },
+		   { { 0x11, 0x0B }, 2 },
+		   { { 0x12, 0x0C }, 2 },
+		   { { 0x13, 0x01 }, 2 },
+		   { { 0x14, 0x0F }, 2 },
+		   { { 0x15, 0x10 }, 2 },
+		   { { 0x16, 0x10 }, 2 },
+		   { { 0x17, 0x10 }, 2 },
+		   { { 0x18, 0x89 }, 2 },
+		   { { 0x19, 0x8A }, 2 },
+		   { { 0x1A, 0x13 }, 2 },
+		   { { 0x1B, 0x13 }, 2 },
+		   { { 0x1C, 0x15 }, 2 },
+		   { { 0x1D, 0x15 }, 2 },
+		   { { 0x1E, 0x17 }, 2 },
+		   { { 0x1F, 0x17 }, 2 },
+		   /* STV */
+		   { { 0x20, 0x40 }, 2 },
+		   { { 0x21, 0x01 }, 2 },
+		   { { 0x22, 0x00 }, 2 },
+		   { { 0x23, 0x40 }, 2 },
+		   { { 0x24, 0x40 }, 2 },
+		   { { 0x25, 0x6D }, 2 },
+		   { { 0x26, 0x40 }, 2 },
+		   { { 0x27, 0x40 }, 2 },
+		   /* Vend */
+		   { { 0xE0, 0x00 }, 2 },
+		   { { 0xDC, 0x21 }, 2 },
+		   { { 0xDD, 0x22 }, 2 },
+		   { { 0xDE, 0x07 }, 2 },
+		   { { 0xDF, 0x07 }, 2 },
+		   { { 0xE3, 0x6D }, 2 },
+		   { { 0xE1, 0x07 }, 2 },
+		   { { 0xE2, 0x07 }, 2 },
+		   /* UD */
+		   { { 0x29, 0xD8 }, 2 },
+		   { { 0x2A, 0x2A }, 2 },
+		   /* CLK */
+		   { { 0x4B, 0x03 }, 2 },
+		   { { 0x4C, 0x11 }, 2 },
+		   { { 0x4D, 0x10 }, 2 },
+		   { { 0x4E, 0x01 }, 2 },
+		   { { 0x4F, 0x01 }, 2 },
+		   { { 0x50, 0x10 }, 2 },
+		   { { 0x51, 0x00 }, 2 },
+		   { { 0x52, 0x80 }, 2 },
+		   { { 0x53, 0x00 }, 2 },
+		   { { 0x56, 0x00 }, 2 },
+		   { { 0x54, 0x07 }, 2 },
+		   { { 0x58, 0x07 }, 2 },
+		   { { 0x55, 0x25 }, 2 },
+		   /* Reset XDONB */
+		   { { 0x5B, 0x43 }, 2 },
+		   { { 0x5C, 0x00 }, 2 },
+		   { { 0x5F, 0x73 }, 2 },
+		   { { 0x60, 0x73 }, 2 },
+		   { { 0x63, 0x22 }, 2 },
+		   { { 0x64, 0x00 }, 2 },
+		   { { 0x67, 0x08 }, 2 },
+		   { { 0x68, 0x04 }, 2 },
+		   /* Resolution:1440x2560 */
+		   { { 0x72, 0x02 }, 2 },
+		   /* mux */
+		   { { 0x7A, 0x80 }, 2 },
+		   { { 0x7B, 0x91 }, 2 },
+		   { { 0x7C, 0xD8 }, 2 },
+		   { { 0x7D, 0x60 }, 2 },
+		   { { 0x7F, 0x15 }, 2 },
+		   { { 0x75, 0x15 }, 2 },
+		   /* ABOFF */
+		   { { 0xB3, 0xC0 }, 2 },
+		   { { 0xB4, 0x00 }, 2 },
+		   { { 0xB5, 0x00 }, 2 },
+		   /* Source EQ */
+		   { { 0x78, 0x00 }, 2 },
+		   { { 0x79, 0x00 }, 2 },
+		   { { 0x80, 0x00 }, 2 },
+		   { { 0x83, 0x00 }, 2 },
+		   /* FP BP */
+		   { { 0x93, 0x0A }, 2 },
+		   { { 0x94, 0x0A }, 2 },
+		   /* Inversion Type */
+		   { { 0x8A, 0x00 }, 2 },
+		   { { 0x9B, 0xFF }, 2 },
+		   /* IMGSWAP =1 @PortSwap=1 */
+		   { { 0x9D, 0xB0 }, 2 },
+		   { { 0x9F, 0x63 }, 2 },
+		   { { 0x98, 0x10 }, 2 },
+		   /* FRM */
+		   { { 0xEC, 0x00 }, 2 },
+		   /* CMD1 */
+		   { { 0xFF, 0x10 }, 2 },
+		    /* VBP+VSA=,VFP = 10H */
+		   { { 0x3B, 0x03, 0x0A, 0x0A, }, 4 },
+		   /* FTE on */
+		   { { 0x35, 0x00 }, 2 },
+		   /* EN_BK =1(auto black) */
+		   { { 0xE5, 0x01 }, 2 },
+		   /* CMD mode(10) VDO mode(03) */
+		   { { 0xBB, 0x03 }, 2 },
+		   /* Non Reload MTP */
+		   { { 0xFB, 0x01 }, 2 },
+};
+
+static int truly_wqxga_prepare(struct drm_panel *panel)
+{
+	struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
+	struct mipi_dsi_device **dsis = ctx->dsi;
+	struct mipi_dsi_device *d;
+	int ret, i, j;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = truly_wqxga_power_on(ctx);
+	if (ret < 0)
+		return ret;
+
+	dsis[0]->mode_flags |= MIPI_DSI_MODE_LPM;
+	dsis[1]->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	for (j = 0; j < ARRAY_SIZE(panel_cmds); j++) {
+		for (i = 0; i < 2; i++) {
+			d = dsis[i];
+			ret = mipi_dsi_dcs_write_buffer(dsis[i],
+					panel_cmds[j].commands,
+					panel_cmds[j].size);
+			if (ret < 0) {
+				dev_err(ctx->dev, "failed to cmd no %d, err: %d\n",
+						j, ret);
+				return ret;
+			}
+		}
+	}
+
+
+	for (i = 0; i < 2; i++)
+		if (mipi_dsi_dcs_exit_sleep_mode(dsis[i]) < 0) {
+			dev_err(ctx->dev, "failed to exit sleep mode\n");
+			return -ECOMM;
+		}
+	msleep(78);
+
+	for (i = 0; i < 2; i++)
+		if (mipi_dsi_dcs_set_display_on(dsis[i]) < 0) {
+			dev_err(ctx->dev, "failed to send display on\n");
+			return -ECOMM;
+		}
+	msleep(78);
+
+	ctx->prepared = true;
+
+	return 0;
+}
+
+static int truly_wqxga_enable(struct drm_panel *panel)
+{
+	struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
+
+	if (ctx->enabled)
+		return 0;
+
+	if (ctx->backlight) {
+		ctx->backlight->props.power = FB_BLANK_UNBLANK;
+		backlight_update_status(ctx->backlight);
+	}
+	ctx->enabled = true;
+
+	return 0;
+}
+
+static int truly_wqxga_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_create(connector->dev);
+	if (!mode) {
+		dev_err(ctx->dev, "failed to create a new display mode\n");
+		return 0;
+	}
+
+	drm_display_mode_from_videomode(&ctx->vm, mode);
+	connector->display_info.width_mm = 74;
+	connector->display_info.height_mm = 131;
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs truly_wqxga_drm_funcs = {
+	.disable = truly_wqxga_disable,
+	.unprepare = truly_wqxga_unprepare,
+	.prepare = truly_wqxga_prepare,
+	.enable = truly_wqxga_enable,
+	.get_modes = truly_wqxga_get_modes,
+};
+
+static int truly_wqxga_panel_add(struct truly_wqxga *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+		ctx->supplies[i].supply = regulator_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset-gpios %ld\n",
+			PTR_ERR(ctx->reset_gpio));
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	ctx->mode_gpio = devm_gpiod_get(dev, "mode", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->mode_gpio)) {
+		dev_err(dev, "cannot get mode gpio %ld\n",
+			PTR_ERR(ctx->mode_gpio));
+		ctx->mode_gpio = NULL;
+		return PTR_ERR(ctx->mode_gpio);
+	}
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret) {
+		dev_err(dev, "%s: failed to set pinctrl default state, %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = of_get_videomode(dev->of_node, &ctx->vm, 0);
+	if (ret < 0)
+		return ret;
+
+	drm_panel_init(&ctx->panel);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &truly_wqxga_drm_funcs;
+	drm_panel_add(&ctx->panel);
+
+	return 0;
+}
+
+static void truly_wqxga_panel_del(struct truly_wqxga *ctx)
+{
+	if (ctx->panel.dev)
+		drm_panel_remove(&ctx->panel);
+}
+
+static int truly_wqxga_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct truly_wqxga *ctx;
+	struct mipi_dsi_device *secondary = NULL;
+	struct device_node *dsi1;
+	struct mipi_dsi_host *dsi1_host;
+	int ret = 0;
+	const struct mipi_dsi_device_info info = {.type = "trulynt35597",
+		.channel = 0,
+		.node = NULL,
+	};
+
+	/* This device represents itself as one with
+	 * two input ports which are fed by the output
+	 * ports of the two DSI controllers . The DSI0
+	 * is the master controller and has most of the
+	 * panel related info in its child node.
+	 */
+
+	/* configure master DSI device */
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS |
+	MIPI_DSI_MODE_LPM;
+
+	/* get the dsi1 output port node */
+	dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+	if (!dsi1) {
+		dev_err(dev, "failed to get remote node\n");
+		return -ENODEV;
+	}
+
+	dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
+	if (!dsi1_host) {
+		dev_err(dev, "failed to find dsi host\n");
+		ret = -EPROBE_DEFER;
+		goto err_host;
+	}
+
+	/* register the second DSI device */
+	secondary = mipi_dsi_device_register_full(dsi1_host,
+		&info);
+
+	if (IS_ERR(secondary)) {
+		dev_err(dev, "failed to create dsi device\n");
+		ret = PTR_ERR(dsi);
+		goto err_dsi_device;
+	}
+
+	/* configure secondary DSI device */
+	secondary->lanes = 4;
+	secondary->format = MIPI_DSI_FMT_RGB888;
+	secondary->mode_flags = MIPI_DSI_MODE_VIDEO |
+		MIPI_DSI_CLOCK_NON_CONTINUOUS |
+		MIPI_DSI_MODE_LPM;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+
+	if (!ctx) {
+		ret = -ENOMEM;
+		goto err_dsi_ctx;
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+	ctx->dsi[0] = dsi;
+	ctx->dsi[1] = secondary;
+
+	ret = truly_wqxga_panel_add(ctx);
+	if (ret) {
+		dev_err(dev, "failed to add panel\n");
+		goto err_panel_add;
+	}
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "master dsi attach failed\n");
+		goto err_dsi_attach;
+	}
+
+	ret = mipi_dsi_attach(secondary);
+	if (ret < 0) {
+		dev_err(dev, "mipi_dsi_attach on secondary failed\n");
+		goto err_dsi_attach_sec;
+	}
+
+	of_node_put(dsi1);
+
+	return 0;
+
+err_dsi_attach_sec:
+	mipi_dsi_detach(ctx->dsi[0]);
+err_dsi_attach:
+	truly_wqxga_panel_del(ctx);
+err_panel_add:
+	mipi_dsi_device_unregister(secondary);
+err_dsi_ctx:
+err_dsi_device:
+err_host:
+	of_node_put(dsi1);
+	return ret;
+}
+
+static int truly_wqxga_remove(struct mipi_dsi_device *dsi)
+{
+	struct truly_wqxga *ctx = mipi_dsi_get_drvdata(dsi);
+
+	if (ctx) {
+		if (ctx->dsi[0])
+			mipi_dsi_detach(ctx->dsi[0]);
+		if (ctx->dsi[1]) {
+			mipi_dsi_detach(ctx->dsi[1]);
+			mipi_dsi_device_unregister(ctx->dsi[1]);
+		}
+		truly_wqxga_panel_del(ctx);
+		kfree(ctx);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id truly_wqxga_of_match[] = {
+	{ .compatible = "truly,nt35597", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, truly_wqxga_of_match);
+
+static struct mipi_dsi_driver truly_wqxga_driver = {
+	.driver = {
+		.name = "panel_truly_nt35597",
+		.of_match_table = truly_wqxga_of_match,
+	},
+	.probe = truly_wqxga_probe,
+	.remove = truly_wqxga_remove,
+};
+module_mipi_dsi_driver(truly_wqxga_driver);
+
+MODULE_DESCRIPTION("truly nt35597 DSI Panel Driver");
+MODULE_LICENSE("GPL v2");
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

             reply	other threads:[~2018-04-14  7:25 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-14  7:25 Abhinav Kumar [this message]
     [not found] ` <1523690713-22543-1-git-send-email-abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-04-14  7:25   ` [DPU PATCH v2 2/2] drm/panel: add backlight control support for truly panel Abhinav Kumar
     [not found]     ` <1523690713-22543-2-git-send-email-abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-04-16 16:41       ` Bjorn Andersson
2018-04-16 16:51         ` Sean Paul
2018-04-16 22:45         ` abhinavk-sgV2jX0FEOL9JmXXK+q4OQ
     [not found]           ` <d50c2a2dac7d6541d78eee60c2ff4739-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-04-17  6:13             ` Bjorn Andersson
2018-04-17 18:21               ` [Freedreno] " abhinavk
     [not found]                 ` <e220ca93282a7d942d4144ac2313efc0-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-04-17 18:57                   ` Sujeev Dias
2018-04-17 21:29                   ` Bjorn Andersson
2018-04-18  0:04                     ` abhinavk-sgV2jX0FEOL9JmXXK+q4OQ
2018-04-18  0:42                       ` [Freedreno] " abhinavk
2018-04-18 10:52                         ` Daniel Thompson
     [not found]                           ` <20180418105218.oja4gogmcx32ym5a-SoAo7ar8mTX/PtFMR13I2A@public.gmane.org>
2018-04-18 13:42                             ` Sean Paul
2018-04-18 22:08                               ` abhinavk-sgV2jX0FEOL9JmXXK+q4OQ
     [not found]                         ` <be0fa84101458da4cd6d77b963189baf-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-04-19  4:24                           ` Bjorn Andersson
2018-04-18 13:32                       ` [Freedreno] " Sean Paul
     [not found]                       ` <7cb250765fbf7b633fd54e4338cc433d-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-04-19  4:00                         ` Bjorn Andersson
2018-04-19  4:23                           ` abhinavk-sgV2jX0FEOL9JmXXK+q4OQ
     [not found]                             ` <b2e4e39d6911d4ab89fa753d194392b6-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-04-19  4:42                               ` Bjorn Andersson
2018-05-24  1:37                                 ` abhinavk-sgV2jX0FEOL9JmXXK+q4OQ
2018-04-19 17:44   ` [DPU PATCH v2 1/2] drm/panel: Add Truly NT35597 panel Archit Taneja
2018-05-24  1:28     ` abhinavk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1523690713-22543-1-git-send-email-abhinavk@codeaurora.org \
    --to=abhinavk-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=chandanu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=jeykumar-jfJNa2p1gH1BDgjK7y7TUQ@public.gmane.org \
    --cc=jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nganji-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.