* [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes
@ 2013-08-01 7:41 Guennadi Liakhovetski
2013-08-21 8:40 ` Simon Horman
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Guennadi Liakhovetski @ 2013-08-01 7:41 UTC (permalink / raw)
To: linux-sh
This patch adds MMCIF0, SDHI0 and SDHI1 DT nodes and a fixed voltage
reglator for them to the ape6evm-reference platform.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
---
v4: make SDHI0 Vcc 3.3V instead of 3.0V
arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 72 +++++++++++++++++++++++
1 files changed, 72 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
index bbd09d8..6797fac 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -10,6 +10,7 @@
/dts-v1/;
/include/ "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "APE6EVM";
@@ -24,6 +25,34 @@
reg = <0 0x40000000 0 0x40000000>;
};
+ vcc_mmc0: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "MMC0 Vcc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ vcc_sdhi0: regulator@1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ /* Common 3.3V rail, used by several devices on APE6EVM */
+ ape6evm_fixed_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
lbsc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -62,4 +91,47 @@
renesas,groups = "scifa0_data";
renesas,function = "scifa0";
};
+
+ mmc0_pins: mmcif {
+ renesas,groups = "mmc0_data8", "mmc0_ctrl";
+ renesas,function = "mmc0";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi1_pins: sdhi1 {
+ renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+ renesas,function = "sdhi1";
+ };
+};
+
+&mmcif0 {
+ vmmc-supply = <&vcc_mmc0>;
+ bus-width = <8>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ status = "okay";
+};
+
+&sdhi0 {
+ vmmc-supply = <&vcc_sdhi0>;
+ bus-width = <4>;
+ toshiba,mmc-wrprotect-disable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi0_pins>;
+ status = "okay";
+};
+
+&sdhi1 {
+ vmmc-supply = <&ape6evm_fixed_3v3>;
+ bus-width = <4>;
+ broken-cd;
+ toshiba,mmc-wrprotect-disable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi1_pins>;
+ status = "okay";
};
--
1.7.2.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes
2013-08-01 7:41 [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes Guennadi Liakhovetski
@ 2013-08-21 8:40 ` Simon Horman
2013-08-22 0:50 ` Laurent Pinchart
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Simon Horman @ 2013-08-21 8:40 UTC (permalink / raw)
To: linux-sh
On Thu, Aug 01, 2013 at 09:41:21AM +0200, Guennadi Liakhovetski wrote:
> This patch adds MMCIF0, SDHI0 and SDHI1 DT nodes and a fixed voltage
> reglator for them to the ape6evm-reference platform.
>
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
> ---
>
> v4: make SDHI0 Vcc 3.3V instead of 3.0V
Hi Laurent,
could you review this one too?
>
> arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 72 +++++++++++++++++++++++
> 1 files changed, 72 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
> index bbd09d8..6797fac 100644
> --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
> +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
> @@ -10,6 +10,7 @@
>
> /dts-v1/;
> /include/ "r8a73a4.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "APE6EVM";
> @@ -24,6 +25,34 @@
> reg = <0 0x40000000 0 0x40000000>;
> };
>
> + vcc_mmc0: regulator@0 {
> + compatible = "regulator-fixed";
> + regulator-name = "MMC0 Vcc";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + vcc_sdhi0: regulator@1 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "SDHI0 Vcc";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + /* Common 3.3V rail, used by several devices on APE6EVM */
> + ape6evm_fixed_3v3: regulator@2 {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> lbsc {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -62,4 +91,47 @@
> renesas,groups = "scifa0_data";
> renesas,function = "scifa0";
> };
> +
> + mmc0_pins: mmcif {
> + renesas,groups = "mmc0_data8", "mmc0_ctrl";
> + renesas,function = "mmc0";
> + };
> +
> + sdhi0_pins: sdhi0 {
> + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
> + renesas,function = "sdhi0";
> + };
> +
> + sdhi1_pins: sdhi1 {
> + renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
> + renesas,function = "sdhi1";
> + };
> +};
> +
> +&mmcif0 {
> + vmmc-supply = <&vcc_mmc0>;
> + bus-width = <8>;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins>;
> + status = "okay";
> +};
> +
> +&sdhi0 {
> + vmmc-supply = <&vcc_sdhi0>;
> + bus-width = <4>;
> + toshiba,mmc-wrprotect-disable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhi0_pins>;
> + status = "okay";
> +};
> +
> +&sdhi1 {
> + vmmc-supply = <&ape6evm_fixed_3v3>;
> + bus-width = <4>;
> + broken-cd;
> + toshiba,mmc-wrprotect-disable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhi1_pins>;
> + status = "okay";
> };
> --
> 1.7.2.5
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes
2013-08-01 7:41 [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes Guennadi Liakhovetski
2013-08-21 8:40 ` Simon Horman
@ 2013-08-22 0:50 ` Laurent Pinchart
2013-08-22 6:28 ` Simon Horman
2014-12-02 8:37 ` [PATCH 3/3] ARM: shmobile: ape6evm-reference: Add keypad to the device tree Ulrich Hecht
3 siblings, 0 replies; 5+ messages in thread
From: Laurent Pinchart @ 2013-08-22 0:50 UTC (permalink / raw)
To: linux-sh
Hi Guennadi,
Thank you for the patch.
On Thursday 01 August 2013 09:41:21 Guennadi Liakhovetski wrote:
> This patch adds MMCIF0, SDHI0 and SDHI1 DT nodes and a fixed voltage
> reglator for them to the ape6evm-reference platform.
>
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>
> v4: make SDHI0 Vcc 3.3V instead of 3.0V
>
> arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 72
> +++++++++++++++++++++++ 1 files changed, 72 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
> b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index bbd09d8..6797fac
> 100644
> --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
> +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
> @@ -10,6 +10,7 @@
>
> /dts-v1/;
> /include/ "r8a73a4.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "APE6EVM";
> @@ -24,6 +25,34 @@
> reg = <0 0x40000000 0 0x40000000>;
> };
>
> + vcc_mmc0: regulator@0 {
> + compatible = "regulator-fixed";
> + regulator-name = "MMC0 Vcc";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + vcc_sdhi0: regulator@1 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "SDHI0 Vcc";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + /* Common 3.3V rail, used by several devices on APE6EVM */
> + ape6evm_fixed_3v3: regulator@2 {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> lbsc {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -62,4 +91,47 @@
> renesas,groups = "scifa0_data";
> renesas,function = "scifa0";
> };
> +
> + mmc0_pins: mmcif {
> + renesas,groups = "mmc0_data8", "mmc0_ctrl";
> + renesas,function = "mmc0";
> + };
> +
> + sdhi0_pins: sdhi0 {
> + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
> + renesas,function = "sdhi0";
> + };
> +
> + sdhi1_pins: sdhi1 {
> + renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
> + renesas,function = "sdhi1";
> + };
> +};
> +
> +&mmcif0 {
> + vmmc-supply = <&vcc_mmc0>;
> + bus-width = <8>;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins>;
> + status = "okay";
> +};
> +
> +&sdhi0 {
> + vmmc-supply = <&vcc_sdhi0>;
> + bus-width = <4>;
> + toshiba,mmc-wrprotect-disable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhi0_pins>;
> + status = "okay";
> +};
> +
> +&sdhi1 {
> + vmmc-supply = <&ape6evm_fixed_3v3>;
> + bus-width = <4>;
> + broken-cd;
> + toshiba,mmc-wrprotect-disable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhi1_pins>;
> + status = "okay";
> };
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes
2013-08-01 7:41 [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes Guennadi Liakhovetski
2013-08-21 8:40 ` Simon Horman
2013-08-22 0:50 ` Laurent Pinchart
@ 2013-08-22 6:28 ` Simon Horman
2014-12-02 8:37 ` [PATCH 3/3] ARM: shmobile: ape6evm-reference: Add keypad to the device tree Ulrich Hecht
3 siblings, 0 replies; 5+ messages in thread
From: Simon Horman @ 2013-08-22 6:28 UTC (permalink / raw)
To: linux-sh
On Thu, Aug 22, 2013 at 02:50:18AM +0200, Laurent Pinchart wrote:
> Hi Guennadi,
>
> Thank you for the patch.
>
> On Thursday 01 August 2013 09:41:21 Guennadi Liakhovetski wrote:
> > This patch adds MMCIF0, SDHI0 and SDHI1 DT nodes and a fixed voltage
> > reglator for them to the ape6evm-reference platform.
> >
> > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks, I have queued this up in the dt3 branch.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 3/3] ARM: shmobile: ape6evm-reference: Add keypad to the device tree
2013-08-01 7:41 [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes Guennadi Liakhovetski
` (2 preceding siblings ...)
2013-08-22 6:28 ` Simon Horman
@ 2014-12-02 8:37 ` Ulrich Hecht
3 siblings, 0 replies; 5+ messages in thread
From: Ulrich Hecht @ 2014-12-02 8:37 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 41 +++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
index a2c73c4..e214589 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "r8a73a4.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "APE6EVM";
@@ -110,6 +111,46 @@
label = "bbresetout";
};
};
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ zero-key {
+ gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_0>;
+ label = "S16";
+ };
+
+ menu-key {
+ gpios = <&pfc 325 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "S17";
+ };
+
+ home-key {
+ gpios = <&pfc 326 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "S18";
+ };
+
+ back-key {
+ gpios = <&pfc 327 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "S19";
+ };
+
+ volup-key {
+ gpios = <&pfc 328 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "S20";
+ };
+
+ voldown-key {
+ gpios = <&pfc 329 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "S21";
+ };
+ };
};
&i2c5 {
--
1.8.4.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-12-02 8:37 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-01 7:41 [PATCH 3/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes Guennadi Liakhovetski
2013-08-21 8:40 ` Simon Horman
2013-08-22 0:50 ` Laurent Pinchart
2013-08-22 6:28 ` Simon Horman
2014-12-02 8:37 ` [PATCH 3/3] ARM: shmobile: ape6evm-reference: Add keypad to the device tree Ulrich Hecht
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.