[RESEND PATCH v2 0/2] clk: meson-g12a: Add EE clock controller driver

[RESEND PATCH v2 0/2] clk: meson-g12a: Add EE clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part of
the Amlogic Meson-G12A SoC.

Changes since v1 at[1]
-fix typo of 'Everything'.
-change the word ?AmLogic? to 'Amlogic'
-squash patch 1 and 2.
-delete usless message of "Trying obsolete regs".
-delete the empty line in include/dt-bindings/clock/g12a-clkc.h.
-rebase on top of the "next/drivers" branch, and add g12a clock patch.
-add CLK_MUX_ROUND_CLOSEST for g12a_sd_emmc_b_clk0_sel and
 g12a_sd_emmc_c_clk0_sel.

I have forgetten adding the PATCH version tag, so resend it 

[1]https://lkml.kernel.org/r/1531133549-25806-2-git-send-email-jian.hu at amlogic.com

Jian Hu (2):
  dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
  clk: meson-g12a: Add EE Clock controller driver

 .../bindings/clock/amlogic,gxbb-clkc.txt           |   1 +
 drivers/clk/meson/Kconfig                          |  10 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/g12a.c                           | 994 +++++++++++++++++++++
 drivers/clk/meson/g12a.h                           | 122 +++
 include/dt-bindings/clock/g12a-clkc.h              |  92 ++
 6 files changed, 1220 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

-- 
1.9.1

[RESEND PATCH v2 0/2] clk: meson-g12a: Add EE clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part of
the Amlogic Meson-G12A SoC.

Changes since v1 at[1]
-fix typo of 'Everything'.
-change the word ‘AmLogic’ to 'Amlogic'
-squash patch 1 and 2.
-delete usless message of "Trying obsolete regs".
-delete the empty line in include/dt-bindings/clock/g12a-clkc.h.
-rebase on top of the "next/drivers" branch, and add g12a clock patch.
-add CLK_MUX_ROUND_CLOSEST for g12a_sd_emmc_b_clk0_sel and
 g12a_sd_emmc_c_clk0_sel.

I have forgetten adding the PATCH version tag, so resend it 

[1]https://lkml.kernel.org/r/1531133549-25806-2-git-send-email-jian.hu@amlogic.com

Jian Hu (2):
  dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
  clk: meson-g12a: Add EE Clock controller driver

 .../bindings/clock/amlogic,gxbb-clkc.txt           |   1 +
 drivers/clk/meson/Kconfig                          |  10 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/g12a.c                           | 994 +++++++++++++++++++++
 drivers/clk/meson/g12a.h                           | 122 +++
 include/dt-bindings/clock/g12a-clkc.h              |  92 ++
 6 files changed, 1220 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[RESEND PATCH v2 0/2] clk: meson-g12a: Add EE clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part of
the Amlogic Meson-G12A SoC.

Changes since v1 at[1]
-fix typo of 'Everything'.
-change the word ?AmLogic? to 'Amlogic'
-squash patch 1 and 2.
-delete usless message of "Trying obsolete regs".
-delete the empty line in include/dt-bindings/clock/g12a-clkc.h.
-rebase on top of the "next/drivers" branch, and add g12a clock patch.
-add CLK_MUX_ROUND_CLOSEST for g12a_sd_emmc_b_clk0_sel and
 g12a_sd_emmc_c_clk0_sel.

I have forgetten adding the PATCH version tag, so resend it 

[1]https://lkml.kernel.org/r/1531133549-25806-2-git-send-email-jian.hu at amlogic.com

Jian Hu (2):
  dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
  clk: meson-g12a: Add EE Clock controller driver

 .../bindings/clock/amlogic,gxbb-clkc.txt           |   1 +
 drivers/clk/meson/Kconfig                          |  10 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/g12a.c                           | 994 +++++++++++++++++++++
 drivers/clk/meson/g12a.h                           | 122 +++
 include/dt-bindings/clock/g12a-clkc.h              |  92 ++
 6 files changed, 1220 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

-- 
1.9.1

[RESEND PATCH v2 0/2] clk: meson-g12a: Add EE clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part of
the Amlogic Meson-G12A SoC.

Changes since v1 at[1]
-fix typo of 'Everything'.
-change the word ‘AmLogic’ to 'Amlogic'
-squash patch 1 and 2.
-delete usless message of "Trying obsolete regs".
-delete the empty line in include/dt-bindings/clock/g12a-clkc.h.
-rebase on top of the "next/drivers" branch, and add g12a clock patch.
-add CLK_MUX_ROUND_CLOSEST for g12a_sd_emmc_b_clk0_sel and
 g12a_sd_emmc_c_clk0_sel.

I have forgetten adding the PATCH version tag, so resend it 

[1]https://lkml.kernel.org/r/1531133549-25806-2-git-send-email-jian.hu@amlogic.com

Jian Hu (2):
  dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
  clk: meson-g12a: Add EE Clock controller driver

 .../bindings/clock/amlogic,gxbb-clkc.txt           |   1 +
 drivers/clk/meson/Kconfig                          |  10 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/g12a.c                           | 994 +++++++++++++++++++++
 drivers/clk/meson/g12a.h                           | 122 +++
 include/dt-bindings/clock/g12a-clkc.h              |  92 ++
 6 files changed, 1220 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

-- 
1.9.1

[RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jian Hu]

Add new clock controller compatible and dt-bingdings headers
for the Everything-Else domain of the g12a SoC


Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
 include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e950599..0833006 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,7 @@ Required Properties:
 		"amlogic,gxbb-clkc" for GXBB SoC,
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
+		"amlogic,g12a-clkc" for G12A SoC.
 
 - #clock-cells: should be 1.
 
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
new file mode 100644
index 0000000..9796720
--- /dev/null
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-G12A clock tree IDs
+ *
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __G12A_CLKC_H
+#define __G12A_CLKC_H
+
+#define CLKID_SYS_PLL				0
+#define CLKID_FIXED_PLL				1
+#define CLKID_FCLK_DIV2				2
+#define CLKID_FCLK_DIV3				3
+#define CLKID_FCLK_DIV4				4
+#define CLKID_FCLK_DIV5				5
+#define CLKID_FCLK_DIV7				6
+#define CLKID_GP0_PLL				7
+#define CLKID_CLK81					10
+#define CLKID_MPLL0					11
+#define CLKID_MPLL1					12
+#define CLKID_MPLL2					13
+#define CLKID_MPLL3					14
+#define CLKID_DDR					15
+#define CLKID_DOS					16
+#define CLKID_AUDIO_LOCKER			17
+#define CLKID_MIPI_DSI_HOST			18
+#define CLKID_ETH_PHY				19
+#define CLKID_ISA					20
+#define CLKID_PL301					21
+#define CLKID_PERIPHS				22
+#define CLKID_SPICC0				23
+#define CLKID_I2C					24
+#define CLKID_SANA					25
+#define CLKID_SD					26
+#define CLKID_RNG0					27
+#define CLKID_UART0					28
+#define CLKID_SPICC1				29
+#define CLKID_HIU_IFACE				30
+#define CLKID_MIPI_DSI_PHY			31
+#define CLKID_ASSIST_MISC			32
+#define CLKID_SD_EMMC_A				33
+#define CLKID_SD_EMMC_B				34
+#define CLKID_SD_EMMC_C				35
+#define CLKID_AUDIO_CODEC			36
+#define CLKID_AUDIO					37
+#define CLKID_ETH					38
+#define CLKID_DEMUX					39
+#define CLKID_AUDIO_IFIFO			40
+#define CLKID_ADC					41
+#define CLKID_UART1					42
+#define CLKID_G2D					43
+#define CLKID_RESET					44
+#define CLKID_PCIE_COMB				45
+#define CLKID_PARSER				46
+#define CLKID_USB					47
+#define CLKID_PCIE_PHY				48
+#define CLKID_AHB_ARB0				49
+#define CLKID_AHB_DATA_BUS			50
+#define CLKID_AHB_CTRL_BUS			51
+#define CLKID_HTX_HDCP22			52
+#define CLKID_HTX_PCLK				53
+#define CLKID_BT656					54
+#define CLKID_USB1_DDR_BRIDGE		55
+#define CLKID_MMC_PCLK				56
+#define CLKID_UART2					57
+#define CLKID_VPU_INTR				58
+#define CLKID_GIC					59
+#define CLKID_SD_EMMC_B_CLK0		60
+#define CLKID_SD_EMMC_C_CLK0		61
+#define CLKID_HIFI_PLL				71
+#define CLKID_VCLK2_VENCI0			77
+#define CLKID_VCLK2_VENCI1			78
+#define CLKID_VCLK2_VENCP0			79
+#define CLKID_VCLK2_VENCP1			80
+#define CLKID_VCLK2_VENCT0			81
+#define CLKID_VCLK2_VENCT1			82
+#define CLKID_VCLK2_OTHER			83
+#define CLKID_VCLK2_ENCI			84
+#define CLKID_VCLK2_ENCP			85
+#define CLKID_DAC_CLK				86
+#define CLKID_AOCLK					87
+#define CLKID_IEC958				88
+#define CLKID_ENC480P				89
+#define CLKID_RNG1					90
+#define CLKID_VCLK2_ENCT			91
+#define CLKID_VCLK2_ENCL			92
+#define CLKID_VCLK2_VENCLMMC		93
+#define CLKID_VCLK2_VENCL			94
+#define CLKID_VCLK2_OTHER1			95
+
+#endif /* __G12A_CLKC_H */
-- 
1.9.1

[RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jian Hu]

Add new clock controller compatible and dt-bingdings headers
for the Everything-Else domain of the g12a SoC


Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
 include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e950599..0833006 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,7 @@ Required Properties:
 		"amlogic,gxbb-clkc" for GXBB SoC,
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
+		"amlogic,g12a-clkc" for G12A SoC.
 
 - #clock-cells: should be 1.
 
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
new file mode 100644
index 0000000..9796720
--- /dev/null
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-G12A clock tree IDs
+ *
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __G12A_CLKC_H
+#define __G12A_CLKC_H
+
+#define CLKID_SYS_PLL				0
+#define CLKID_FIXED_PLL				1
+#define CLKID_FCLK_DIV2				2
+#define CLKID_FCLK_DIV3				3
+#define CLKID_FCLK_DIV4				4
+#define CLKID_FCLK_DIV5				5
+#define CLKID_FCLK_DIV7				6
+#define CLKID_GP0_PLL				7
+#define CLKID_CLK81					10
+#define CLKID_MPLL0					11
+#define CLKID_MPLL1					12
+#define CLKID_MPLL2					13
+#define CLKID_MPLL3					14
+#define CLKID_DDR					15
+#define CLKID_DOS					16
+#define CLKID_AUDIO_LOCKER			17
+#define CLKID_MIPI_DSI_HOST			18
+#define CLKID_ETH_PHY				19
+#define CLKID_ISA					20
+#define CLKID_PL301					21
+#define CLKID_PERIPHS				22
+#define CLKID_SPICC0				23
+#define CLKID_I2C					24
+#define CLKID_SANA					25
+#define CLKID_SD					26
+#define CLKID_RNG0					27
+#define CLKID_UART0					28
+#define CLKID_SPICC1				29
+#define CLKID_HIU_IFACE				30
+#define CLKID_MIPI_DSI_PHY			31
+#define CLKID_ASSIST_MISC			32
+#define CLKID_SD_EMMC_A				33
+#define CLKID_SD_EMMC_B				34
+#define CLKID_SD_EMMC_C				35
+#define CLKID_AUDIO_CODEC			36
+#define CLKID_AUDIO					37
+#define CLKID_ETH					38
+#define CLKID_DEMUX					39
+#define CLKID_AUDIO_IFIFO			40
+#define CLKID_ADC					41
+#define CLKID_UART1					42
+#define CLKID_G2D					43
+#define CLKID_RESET					44
+#define CLKID_PCIE_COMB				45
+#define CLKID_PARSER				46
+#define CLKID_USB					47
+#define CLKID_PCIE_PHY				48
+#define CLKID_AHB_ARB0				49
+#define CLKID_AHB_DATA_BUS			50
+#define CLKID_AHB_CTRL_BUS			51
+#define CLKID_HTX_HDCP22			52
+#define CLKID_HTX_PCLK				53
+#define CLKID_BT656					54
+#define CLKID_USB1_DDR_BRIDGE		55
+#define CLKID_MMC_PCLK				56
+#define CLKID_UART2					57
+#define CLKID_VPU_INTR				58
+#define CLKID_GIC					59
+#define CLKID_SD_EMMC_B_CLK0		60
+#define CLKID_SD_EMMC_C_CLK0		61
+#define CLKID_HIFI_PLL				71
+#define CLKID_VCLK2_VENCI0			77
+#define CLKID_VCLK2_VENCI1			78
+#define CLKID_VCLK2_VENCP0			79
+#define CLKID_VCLK2_VENCP1			80
+#define CLKID_VCLK2_VENCT0			81
+#define CLKID_VCLK2_VENCT1			82
+#define CLKID_VCLK2_OTHER			83
+#define CLKID_VCLK2_ENCI			84
+#define CLKID_VCLK2_ENCP			85
+#define CLKID_DAC_CLK				86
+#define CLKID_AOCLK					87
+#define CLKID_IEC958				88
+#define CLKID_ENC480P				89
+#define CLKID_RNG1					90
+#define CLKID_VCLK2_ENCT			91
+#define CLKID_VCLK2_ENCL			92
+#define CLKID_VCLK2_VENCLMMC		93
+#define CLKID_VCLK2_VENCL			94
+#define CLKID_VCLK2_OTHER1			95
+
+#endif /* __G12A_CLKC_H */
-- 
1.9.1

[RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jian Hu]

Add new clock controller compatible and dt-bingdings headers
for the Everything-Else domain of the g12a SoC


Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
 include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e950599..0833006 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,7 @@ Required Properties:
 		"amlogic,gxbb-clkc" for GXBB SoC,
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
+		"amlogic,g12a-clkc" for G12A SoC.
 
 - #clock-cells: should be 1.
 
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
new file mode 100644
index 0000000..9796720
--- /dev/null
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-G12A clock tree IDs
+ *
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __G12A_CLKC_H
+#define __G12A_CLKC_H
+
+#define CLKID_SYS_PLL				0
+#define CLKID_FIXED_PLL				1
+#define CLKID_FCLK_DIV2				2
+#define CLKID_FCLK_DIV3				3
+#define CLKID_FCLK_DIV4				4
+#define CLKID_FCLK_DIV5				5
+#define CLKID_FCLK_DIV7				6
+#define CLKID_GP0_PLL				7
+#define CLKID_CLK81					10
+#define CLKID_MPLL0					11
+#define CLKID_MPLL1					12
+#define CLKID_MPLL2					13
+#define CLKID_MPLL3					14
+#define CLKID_DDR					15
+#define CLKID_DOS					16
+#define CLKID_AUDIO_LOCKER			17
+#define CLKID_MIPI_DSI_HOST			18
+#define CLKID_ETH_PHY				19
+#define CLKID_ISA					20
+#define CLKID_PL301					21
+#define CLKID_PERIPHS				22
+#define CLKID_SPICC0				23
+#define CLKID_I2C					24
+#define CLKID_SANA					25
+#define CLKID_SD					26
+#define CLKID_RNG0					27
+#define CLKID_UART0					28
+#define CLKID_SPICC1				29
+#define CLKID_HIU_IFACE				30
+#define CLKID_MIPI_DSI_PHY			31
+#define CLKID_ASSIST_MISC			32
+#define CLKID_SD_EMMC_A				33
+#define CLKID_SD_EMMC_B				34
+#define CLKID_SD_EMMC_C				35
+#define CLKID_AUDIO_CODEC			36
+#define CLKID_AUDIO					37
+#define CLKID_ETH					38
+#define CLKID_DEMUX					39
+#define CLKID_AUDIO_IFIFO			40
+#define CLKID_ADC					41
+#define CLKID_UART1					42
+#define CLKID_G2D					43
+#define CLKID_RESET					44
+#define CLKID_PCIE_COMB				45
+#define CLKID_PARSER				46
+#define CLKID_USB					47
+#define CLKID_PCIE_PHY				48
+#define CLKID_AHB_ARB0				49
+#define CLKID_AHB_DATA_BUS			50
+#define CLKID_AHB_CTRL_BUS			51
+#define CLKID_HTX_HDCP22			52
+#define CLKID_HTX_PCLK				53
+#define CLKID_BT656					54
+#define CLKID_USB1_DDR_BRIDGE		55
+#define CLKID_MMC_PCLK				56
+#define CLKID_UART2					57
+#define CLKID_VPU_INTR				58
+#define CLKID_GIC					59
+#define CLKID_SD_EMMC_B_CLK0		60
+#define CLKID_SD_EMMC_C_CLK0		61
+#define CLKID_HIFI_PLL				71
+#define CLKID_VCLK2_VENCI0			77
+#define CLKID_VCLK2_VENCI1			78
+#define CLKID_VCLK2_VENCP0			79
+#define CLKID_VCLK2_VENCP1			80
+#define CLKID_VCLK2_VENCT0			81
+#define CLKID_VCLK2_VENCT1			82
+#define CLKID_VCLK2_OTHER			83
+#define CLKID_VCLK2_ENCI			84
+#define CLKID_VCLK2_ENCP			85
+#define CLKID_DAC_CLK				86
+#define CLKID_AOCLK					87
+#define CLKID_IEC958				88
+#define CLKID_ENC480P				89
+#define CLKID_RNG1					90
+#define CLKID_VCLK2_ENCT			91
+#define CLKID_VCLK2_ENCL			92
+#define CLKID_VCLK2_VENCLMMC		93
+#define CLKID_VCLK2_VENCL			94
+#define CLKID_VCLK2_OTHER1			95
+
+#endif /* __G12A_CLKC_H */
-- 
1.9.1

[RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jian Hu]

Add new clock controller compatible and dt-bingdings headers
for the Everything-Else domain of the g12a SoC


Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
 include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e950599..0833006 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,7 @@ Required Properties:
 		"amlogic,gxbb-clkc" for GXBB SoC,
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
+		"amlogic,g12a-clkc" for G12A SoC.
 
 - #clock-cells: should be 1.
 
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
new file mode 100644
index 0000000..9796720
--- /dev/null
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-G12A clock tree IDs
+ *
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __G12A_CLKC_H
+#define __G12A_CLKC_H
+
+#define CLKID_SYS_PLL				0
+#define CLKID_FIXED_PLL				1
+#define CLKID_FCLK_DIV2				2
+#define CLKID_FCLK_DIV3				3
+#define CLKID_FCLK_DIV4				4
+#define CLKID_FCLK_DIV5				5
+#define CLKID_FCLK_DIV7				6
+#define CLKID_GP0_PLL				7
+#define CLKID_CLK81					10
+#define CLKID_MPLL0					11
+#define CLKID_MPLL1					12
+#define CLKID_MPLL2					13
+#define CLKID_MPLL3					14
+#define CLKID_DDR					15
+#define CLKID_DOS					16
+#define CLKID_AUDIO_LOCKER			17
+#define CLKID_MIPI_DSI_HOST			18
+#define CLKID_ETH_PHY				19
+#define CLKID_ISA					20
+#define CLKID_PL301					21
+#define CLKID_PERIPHS				22
+#define CLKID_SPICC0				23
+#define CLKID_I2C					24
+#define CLKID_SANA					25
+#define CLKID_SD					26
+#define CLKID_RNG0					27
+#define CLKID_UART0					28
+#define CLKID_SPICC1				29
+#define CLKID_HIU_IFACE				30
+#define CLKID_MIPI_DSI_PHY			31
+#define CLKID_ASSIST_MISC			32
+#define CLKID_SD_EMMC_A				33
+#define CLKID_SD_EMMC_B				34
+#define CLKID_SD_EMMC_C				35
+#define CLKID_AUDIO_CODEC			36
+#define CLKID_AUDIO					37
+#define CLKID_ETH					38
+#define CLKID_DEMUX					39
+#define CLKID_AUDIO_IFIFO			40
+#define CLKID_ADC					41
+#define CLKID_UART1					42
+#define CLKID_G2D					43
+#define CLKID_RESET					44
+#define CLKID_PCIE_COMB				45
+#define CLKID_PARSER				46
+#define CLKID_USB					47
+#define CLKID_PCIE_PHY				48
+#define CLKID_AHB_ARB0				49
+#define CLKID_AHB_DATA_BUS			50
+#define CLKID_AHB_CTRL_BUS			51
+#define CLKID_HTX_HDCP22			52
+#define CLKID_HTX_PCLK				53
+#define CLKID_BT656					54
+#define CLKID_USB1_DDR_BRIDGE		55
+#define CLKID_MMC_PCLK				56
+#define CLKID_UART2					57
+#define CLKID_VPU_INTR				58
+#define CLKID_GIC					59
+#define CLKID_SD_EMMC_B_CLK0		60
+#define CLKID_SD_EMMC_C_CLK0		61
+#define CLKID_HIFI_PLL				71
+#define CLKID_VCLK2_VENCI0			77
+#define CLKID_VCLK2_VENCI1			78
+#define CLKID_VCLK2_VENCP0			79
+#define CLKID_VCLK2_VENCP1			80
+#define CLKID_VCLK2_VENCT0			81
+#define CLKID_VCLK2_VENCT1			82
+#define CLKID_VCLK2_OTHER			83
+#define CLKID_VCLK2_ENCI			84
+#define CLKID_VCLK2_ENCP			85
+#define CLKID_DAC_CLK				86
+#define CLKID_AOCLK					87
+#define CLKID_IEC958				88
+#define CLKID_ENC480P				89
+#define CLKID_RNG1					90
+#define CLKID_VCLK2_ENCT			91
+#define CLKID_VCLK2_ENCL			92
+#define CLKID_VCLK2_VENCLMMC		93
+#define CLKID_VCLK2_VENCL			94
+#define CLKID_VCLK2_OTHER1			95
+
+#endif /* __G12A_CLKC_H */
-- 
1.9.1

[RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jerome Brunet]

On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
> Add new clock controller compatible and dt-bingdings headers
> for the Everything-Else domain of the g12a SoC
> 
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---

Extra new line above - please fix next time
Below, comment on alignement on v1 remains un-answered.
Some goes for patch 2.

>  .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
>  include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
>  2 files changed, 93 insertions(+)
>  create mode 100644 include/dt-bindings/clock/g12a-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> index e950599..0833006 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> @@ -9,6 +9,7 @@ Required Properties:
>  		"amlogic,gxbb-clkc" for GXBB SoC,
>  		"amlogic,gxl-clkc" for GXL and GXM SoC,
>  		"amlogic,axg-clkc" for AXG SoC.
> +		"amlogic,g12a-clkc" for G12A SoC.
>  
>  - #clock-cells: should be 1.
>  
> diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
> new file mode 100644
> index 0000000..9796720
> --- /dev/null
> +++ b/include/dt-bindings/clock/g12a-clkc.h
> @@ -0,0 +1,92 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Meson-G12A clock tree IDs
> + *
> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __G12A_CLKC_H
> +#define __G12A_CLKC_H
> +
> +#define CLKID_SYS_PLL				0
> +#define CLKID_FIXED_PLL				1
> +#define CLKID_FCLK_DIV2				2
> +#define CLKID_FCLK_DIV3				3
> +#define CLKID_FCLK_DIV4				4
> +#define CLKID_FCLK_DIV5				5
> +#define CLKID_FCLK_DIV7				6
> +#define CLKID_GP0_PLL				7
> +#define CLKID_CLK81					10
> +#define CLKID_MPLL0					11
> +#define CLKID_MPLL1					12
> +#define CLKID_MPLL2					13
> +#define CLKID_MPLL3					14
> +#define CLKID_DDR					15
> +#define CLKID_DOS					16
> +#define CLKID_AUDIO_LOCKER			17
> +#define CLKID_MIPI_DSI_HOST			18
> +#define CLKID_ETH_PHY				19
> +#define CLKID_ISA					20
> +#define CLKID_PL301					21
> +#define CLKID_PERIPHS				22
> +#define CLKID_SPICC0				23
> +#define CLKID_I2C					24
> +#define CLKID_SANA					25
> +#define CLKID_SD					26
> +#define CLKID_RNG0					27
> +#define CLKID_UART0					28
> +#define CLKID_SPICC1				29
> +#define CLKID_HIU_IFACE				30
> +#define CLKID_MIPI_DSI_PHY			31
> +#define CLKID_ASSIST_MISC			32
> +#define CLKID_SD_EMMC_A				33
> +#define CLKID_SD_EMMC_B				34
> +#define CLKID_SD_EMMC_C				35
> +#define CLKID_AUDIO_CODEC			36
> +#define CLKID_AUDIO					37
> +#define CLKID_ETH					38
> +#define CLKID_DEMUX					39
> +#define CLKID_AUDIO_IFIFO			40
> +#define CLKID_ADC					41
> +#define CLKID_UART1					42
> +#define CLKID_G2D					43
> +#define CLKID_RESET					44
> +#define CLKID_PCIE_COMB				45
> +#define CLKID_PARSER				46
> +#define CLKID_USB					47
> +#define CLKID_PCIE_PHY				48
> +#define CLKID_AHB_ARB0				49
> +#define CLKID_AHB_DATA_BUS			50
> +#define CLKID_AHB_CTRL_BUS			51
> +#define CLKID_HTX_HDCP22			52
> +#define CLKID_HTX_PCLK				53
> +#define CLKID_BT656					54
> +#define CLKID_USB1_DDR_BRIDGE		55
> +#define CLKID_MMC_PCLK				56
> +#define CLKID_UART2					57
> +#define CLKID_VPU_INTR				58
> +#define CLKID_GIC					59
> +#define CLKID_SD_EMMC_B_CLK0		60
> +#define CLKID_SD_EMMC_C_CLK0		61
> +#define CLKID_HIFI_PLL				71
> +#define CLKID_VCLK2_VENCI0			77
> +#define CLKID_VCLK2_VENCI1			78
> +#define CLKID_VCLK2_VENCP0			79
> +#define CLKID_VCLK2_VENCP1			80
> +#define CLKID_VCLK2_VENCT0			81
> +#define CLKID_VCLK2_VENCT1			82
> +#define CLKID_VCLK2_OTHER			83
> +#define CLKID_VCLK2_ENCI			84
> +#define CLKID_VCLK2_ENCP			85
> +#define CLKID_DAC_CLK				86
> +#define CLKID_AOCLK					87
> +#define CLKID_IEC958				88
> +#define CLKID_ENC480P				89
> +#define CLKID_RNG1					90
> +#define CLKID_VCLK2_ENCT			91
> +#define CLKID_VCLK2_ENCL			92
> +#define CLKID_VCLK2_VENCLMMC		93
> +#define CLKID_VCLK2_VENCL			94
> +#define CLKID_VCLK2_OTHER1			95
> +
> +#endif /* __G12A_CLKC_H */

Re: [RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jerome Brunet]

On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
> Add new clock controller compatible and dt-bingdings headers
> for the Everything-Else domain of the g12a SoC
> 
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---

Extra new line above - please fix next time
Below, comment on alignement on v1 remains un-answered.
Some goes for patch 2.

>  .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
>  include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
>  2 files changed, 93 insertions(+)
>  create mode 100644 include/dt-bindings/clock/g12a-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> index e950599..0833006 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> @@ -9,6 +9,7 @@ Required Properties:
>  		"amlogic,gxbb-clkc" for GXBB SoC,
>  		"amlogic,gxl-clkc" for GXL and GXM SoC,
>  		"amlogic,axg-clkc" for AXG SoC.
> +		"amlogic,g12a-clkc" for G12A SoC.
>  
>  - #clock-cells: should be 1.
>  
> diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
> new file mode 100644
> index 0000000..9796720
> --- /dev/null
> +++ b/include/dt-bindings/clock/g12a-clkc.h
> @@ -0,0 +1,92 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Meson-G12A clock tree IDs
> + *
> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __G12A_CLKC_H
> +#define __G12A_CLKC_H
> +
> +#define CLKID_SYS_PLL				0
> +#define CLKID_FIXED_PLL				1
> +#define CLKID_FCLK_DIV2				2
> +#define CLKID_FCLK_DIV3				3
> +#define CLKID_FCLK_DIV4				4
> +#define CLKID_FCLK_DIV5				5
> +#define CLKID_FCLK_DIV7				6
> +#define CLKID_GP0_PLL				7
> +#define CLKID_CLK81					10
> +#define CLKID_MPLL0					11
> +#define CLKID_MPLL1					12
> +#define CLKID_MPLL2					13
> +#define CLKID_MPLL3					14
> +#define CLKID_DDR					15
> +#define CLKID_DOS					16
> +#define CLKID_AUDIO_LOCKER			17
> +#define CLKID_MIPI_DSI_HOST			18
> +#define CLKID_ETH_PHY				19
> +#define CLKID_ISA					20
> +#define CLKID_PL301					21
> +#define CLKID_PERIPHS				22
> +#define CLKID_SPICC0				23
> +#define CLKID_I2C					24
> +#define CLKID_SANA					25
> +#define CLKID_SD					26
> +#define CLKID_RNG0					27
> +#define CLKID_UART0					28
> +#define CLKID_SPICC1				29
> +#define CLKID_HIU_IFACE				30
> +#define CLKID_MIPI_DSI_PHY			31
> +#define CLKID_ASSIST_MISC			32
> +#define CLKID_SD_EMMC_A				33
> +#define CLKID_SD_EMMC_B				34
> +#define CLKID_SD_EMMC_C				35
> +#define CLKID_AUDIO_CODEC			36
> +#define CLKID_AUDIO					37
> +#define CLKID_ETH					38
> +#define CLKID_DEMUX					39
> +#define CLKID_AUDIO_IFIFO			40
> +#define CLKID_ADC					41
> +#define CLKID_UART1					42
> +#define CLKID_G2D					43
> +#define CLKID_RESET					44
> +#define CLKID_PCIE_COMB				45
> +#define CLKID_PARSER				46
> +#define CLKID_USB					47
> +#define CLKID_PCIE_PHY				48
> +#define CLKID_AHB_ARB0				49
> +#define CLKID_AHB_DATA_BUS			50
> +#define CLKID_AHB_CTRL_BUS			51
> +#define CLKID_HTX_HDCP22			52
> +#define CLKID_HTX_PCLK				53
> +#define CLKID_BT656					54
> +#define CLKID_USB1_DDR_BRIDGE		55
> +#define CLKID_MMC_PCLK				56
> +#define CLKID_UART2					57
> +#define CLKID_VPU_INTR				58
> +#define CLKID_GIC					59
> +#define CLKID_SD_EMMC_B_CLK0		60
> +#define CLKID_SD_EMMC_C_CLK0		61
> +#define CLKID_HIFI_PLL				71
> +#define CLKID_VCLK2_VENCI0			77
> +#define CLKID_VCLK2_VENCI1			78
> +#define CLKID_VCLK2_VENCP0			79
> +#define CLKID_VCLK2_VENCP1			80
> +#define CLKID_VCLK2_VENCT0			81
> +#define CLKID_VCLK2_VENCT1			82
> +#define CLKID_VCLK2_OTHER			83
> +#define CLKID_VCLK2_ENCI			84
> +#define CLKID_VCLK2_ENCP			85
> +#define CLKID_DAC_CLK				86
> +#define CLKID_AOCLK					87
> +#define CLKID_IEC958				88
> +#define CLKID_ENC480P				89
> +#define CLKID_RNG1					90
> +#define CLKID_VCLK2_ENCT			91
> +#define CLKID_VCLK2_ENCL			92
> +#define CLKID_VCLK2_VENCLMMC		93
> +#define CLKID_VCLK2_VENCL			94
> +#define CLKID_VCLK2_OTHER1			95
> +
> +#endif /* __G12A_CLKC_H */

[RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jerome Brunet]

On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
> Add new clock controller compatible and dt-bingdings headers
> for the Everything-Else domain of the g12a SoC
> 
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---

Extra new line above - please fix next time
Below, comment on alignement on v1 remains un-answered.
Some goes for patch 2.

>  .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
>  include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
>  2 files changed, 93 insertions(+)
>  create mode 100644 include/dt-bindings/clock/g12a-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> index e950599..0833006 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> @@ -9,6 +9,7 @@ Required Properties:
>  		"amlogic,gxbb-clkc" for GXBB SoC,
>  		"amlogic,gxl-clkc" for GXL and GXM SoC,
>  		"amlogic,axg-clkc" for AXG SoC.
> +		"amlogic,g12a-clkc" for G12A SoC.
>  
>  - #clock-cells: should be 1.
>  
> diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
> new file mode 100644
> index 0000000..9796720
> --- /dev/null
> +++ b/include/dt-bindings/clock/g12a-clkc.h
> @@ -0,0 +1,92 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Meson-G12A clock tree IDs
> + *
> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __G12A_CLKC_H
> +#define __G12A_CLKC_H
> +
> +#define CLKID_SYS_PLL				0
> +#define CLKID_FIXED_PLL				1
> +#define CLKID_FCLK_DIV2				2
> +#define CLKID_FCLK_DIV3				3
> +#define CLKID_FCLK_DIV4				4
> +#define CLKID_FCLK_DIV5				5
> +#define CLKID_FCLK_DIV7				6
> +#define CLKID_GP0_PLL				7
> +#define CLKID_CLK81					10
> +#define CLKID_MPLL0					11
> +#define CLKID_MPLL1					12
> +#define CLKID_MPLL2					13
> +#define CLKID_MPLL3					14
> +#define CLKID_DDR					15
> +#define CLKID_DOS					16
> +#define CLKID_AUDIO_LOCKER			17
> +#define CLKID_MIPI_DSI_HOST			18
> +#define CLKID_ETH_PHY				19
> +#define CLKID_ISA					20
> +#define CLKID_PL301					21
> +#define CLKID_PERIPHS				22
> +#define CLKID_SPICC0				23
> +#define CLKID_I2C					24
> +#define CLKID_SANA					25
> +#define CLKID_SD					26
> +#define CLKID_RNG0					27
> +#define CLKID_UART0					28
> +#define CLKID_SPICC1				29
> +#define CLKID_HIU_IFACE				30
> +#define CLKID_MIPI_DSI_PHY			31
> +#define CLKID_ASSIST_MISC			32
> +#define CLKID_SD_EMMC_A				33
> +#define CLKID_SD_EMMC_B				34
> +#define CLKID_SD_EMMC_C				35
> +#define CLKID_AUDIO_CODEC			36
> +#define CLKID_AUDIO					37
> +#define CLKID_ETH					38
> +#define CLKID_DEMUX					39
> +#define CLKID_AUDIO_IFIFO			40
> +#define CLKID_ADC					41
> +#define CLKID_UART1					42
> +#define CLKID_G2D					43
> +#define CLKID_RESET					44
> +#define CLKID_PCIE_COMB				45
> +#define CLKID_PARSER				46
> +#define CLKID_USB					47
> +#define CLKID_PCIE_PHY				48
> +#define CLKID_AHB_ARB0				49
> +#define CLKID_AHB_DATA_BUS			50
> +#define CLKID_AHB_CTRL_BUS			51
> +#define CLKID_HTX_HDCP22			52
> +#define CLKID_HTX_PCLK				53
> +#define CLKID_BT656					54
> +#define CLKID_USB1_DDR_BRIDGE		55
> +#define CLKID_MMC_PCLK				56
> +#define CLKID_UART2					57
> +#define CLKID_VPU_INTR				58
> +#define CLKID_GIC					59
> +#define CLKID_SD_EMMC_B_CLK0		60
> +#define CLKID_SD_EMMC_C_CLK0		61
> +#define CLKID_HIFI_PLL				71
> +#define CLKID_VCLK2_VENCI0			77
> +#define CLKID_VCLK2_VENCI1			78
> +#define CLKID_VCLK2_VENCP0			79
> +#define CLKID_VCLK2_VENCP1			80
> +#define CLKID_VCLK2_VENCT0			81
> +#define CLKID_VCLK2_VENCT1			82
> +#define CLKID_VCLK2_OTHER			83
> +#define CLKID_VCLK2_ENCI			84
> +#define CLKID_VCLK2_ENCP			85
> +#define CLKID_DAC_CLK				86
> +#define CLKID_AOCLK					87
> +#define CLKID_IEC958				88
> +#define CLKID_ENC480P				89
> +#define CLKID_RNG1					90
> +#define CLKID_VCLK2_ENCT			91
> +#define CLKID_VCLK2_ENCL			92
> +#define CLKID_VCLK2_VENCLMMC		93
> +#define CLKID_VCLK2_VENCL			94
> +#define CLKID_VCLK2_OTHER1			95
> +
> +#endif /* __G12A_CLKC_H */

Re: [RESEND PATCH v2 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jerome Brunet]

On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
> Add new clock controller compatible and dt-bingdings headers
> for the Everything-Else domain of the g12a SoC
> 
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---

Extra new line above - please fix next time
Below, comment on alignement on v1 remains un-answered.
Some goes for patch 2.

>  .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
>  include/dt-bindings/clock/g12a-clkc.h              | 92 ++++++++++++++++++++++
>  2 files changed, 93 insertions(+)
>  create mode 100644 include/dt-bindings/clock/g12a-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> index e950599..0833006 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> @@ -9,6 +9,7 @@ Required Properties:
>  		"amlogic,gxbb-clkc" for GXBB SoC,
>  		"amlogic,gxl-clkc" for GXL and GXM SoC,
>  		"amlogic,axg-clkc" for AXG SoC.
> +		"amlogic,g12a-clkc" for G12A SoC.
>  
>  - #clock-cells: should be 1.
>  
> diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
> new file mode 100644
> index 0000000..9796720
> --- /dev/null
> +++ b/include/dt-bindings/clock/g12a-clkc.h
> @@ -0,0 +1,92 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Meson-G12A clock tree IDs
> + *
> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __G12A_CLKC_H
> +#define __G12A_CLKC_H
> +
> +#define CLKID_SYS_PLL				0
> +#define CLKID_FIXED_PLL				1
> +#define CLKID_FCLK_DIV2				2
> +#define CLKID_FCLK_DIV3				3
> +#define CLKID_FCLK_DIV4				4
> +#define CLKID_FCLK_DIV5				5
> +#define CLKID_FCLK_DIV7				6
> +#define CLKID_GP0_PLL				7
> +#define CLKID_CLK81					10
> +#define CLKID_MPLL0					11
> +#define CLKID_MPLL1					12
> +#define CLKID_MPLL2					13
> +#define CLKID_MPLL3					14
> +#define CLKID_DDR					15
> +#define CLKID_DOS					16
> +#define CLKID_AUDIO_LOCKER			17
> +#define CLKID_MIPI_DSI_HOST			18
> +#define CLKID_ETH_PHY				19
> +#define CLKID_ISA					20
> +#define CLKID_PL301					21
> +#define CLKID_PERIPHS				22
> +#define CLKID_SPICC0				23
> +#define CLKID_I2C					24
> +#define CLKID_SANA					25
> +#define CLKID_SD					26
> +#define CLKID_RNG0					27
> +#define CLKID_UART0					28
> +#define CLKID_SPICC1				29
> +#define CLKID_HIU_IFACE				30
> +#define CLKID_MIPI_DSI_PHY			31
> +#define CLKID_ASSIST_MISC			32
> +#define CLKID_SD_EMMC_A				33
> +#define CLKID_SD_EMMC_B				34
> +#define CLKID_SD_EMMC_C				35
> +#define CLKID_AUDIO_CODEC			36
> +#define CLKID_AUDIO					37
> +#define CLKID_ETH					38
> +#define CLKID_DEMUX					39
> +#define CLKID_AUDIO_IFIFO			40
> +#define CLKID_ADC					41
> +#define CLKID_UART1					42
> +#define CLKID_G2D					43
> +#define CLKID_RESET					44
> +#define CLKID_PCIE_COMB				45
> +#define CLKID_PARSER				46
> +#define CLKID_USB					47
> +#define CLKID_PCIE_PHY				48
> +#define CLKID_AHB_ARB0				49
> +#define CLKID_AHB_DATA_BUS			50
> +#define CLKID_AHB_CTRL_BUS			51
> +#define CLKID_HTX_HDCP22			52
> +#define CLKID_HTX_PCLK				53
> +#define CLKID_BT656					54
> +#define CLKID_USB1_DDR_BRIDGE		55
> +#define CLKID_MMC_PCLK				56
> +#define CLKID_UART2					57
> +#define CLKID_VPU_INTR				58
> +#define CLKID_GIC					59
> +#define CLKID_SD_EMMC_B_CLK0		60
> +#define CLKID_SD_EMMC_C_CLK0		61
> +#define CLKID_HIFI_PLL				71
> +#define CLKID_VCLK2_VENCI0			77
> +#define CLKID_VCLK2_VENCI1			78
> +#define CLKID_VCLK2_VENCP0			79
> +#define CLKID_VCLK2_VENCP1			80
> +#define CLKID_VCLK2_VENCT0			81
> +#define CLKID_VCLK2_VENCT1			82
> +#define CLKID_VCLK2_OTHER			83
> +#define CLKID_VCLK2_ENCI			84
> +#define CLKID_VCLK2_ENCP			85
> +#define CLKID_DAC_CLK				86
> +#define CLKID_AOCLK					87
> +#define CLKID_IEC958				88
> +#define CLKID_ENC480P				89
> +#define CLKID_RNG1					90
> +#define CLKID_VCLK2_ENCT			91
> +#define CLKID_VCLK2_ENCL			92
> +#define CLKID_VCLK2_VENCLMMC		93
> +#define CLKID_VCLK2_VENCL			94
> +#define CLKID_VCLK2_OTHER1			95
> +
> +#endif /* __G12A_CLKC_H */

[RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part
of the Amlogic Meson-G12A SoC.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 drivers/clk/meson/Kconfig  |  10 +
 drivers/clk/meson/Makefile |   1 +
 drivers/clk/meson/g12a.c   | 994 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.h   | 122 ++++++
 4 files changed, 1127 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..16edad8 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -54,3 +54,13 @@ config COMMON_CLK_AXG_AUDIO
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
 	  aka axg, Say Y if you want audio subsystem to work.
+
+config COMMON_CLK_G12A
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	select RESET_CONTROLLER
+	select COMMON_CLK_REGMAP_MESON
+	select MFD_SYSCON
+	help
+	  Support for the clock controller on Amlogic S905D2 devices, aka g12a.
+	  Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 72ec8c4..2b1a562 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
+obj-$(CONFIG_COMMON_CLK_G12A)	 += g12a.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
new file mode 100644
index 0000000..c0285ec
--- /dev/null
+++ b/drivers/clk/meson/g12a.c
@@ -0,0 +1,994 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-G12A Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clkc.h"
+#include "g12a.h"
+
+static DEFINE_SPINLOCK(meson_clk_lock);
+
+static struct clk_regmap g12a_fixed_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_FIX_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_sys_init_regs[] = {
+	{ .reg = HHI_SYS_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_SYS_PLL_CNTL4,	.def = 0x88770290 },
+	{ .reg = HHI_SYS_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_SYS_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_sys_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.l = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.init_regs = g12a_sys_init_regs,
+		.init_count = ARRAY_SIZE(g12a_sys_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static const struct pll_rate_table g12a_gp0_pll_rate_table[] = {
+	PLL_RATE(24000000,  128, 1, 7),
+	PLL_RATE(48000000,  128, 1, 6),
+	PLL_RATE(96000000,  128, 1, 5),
+	PLL_RATE(192000000,  128, 1, 4),
+	PLL_RATE(312000000,  208, 1, 4),
+	PLL_RATE(408000000,  136, 1, 3),
+	PLL_RATE(600000000,  200, 1, 3),
+	PLL_RATE(696000000,  232, 1, 3),
+	PLL_RATE(792000000,  132, 1, 2),
+	PLL_RATE(846000000,  141, 1, 2),
+	PLL_RATE(912000000,  152, 1, 2),
+	PLL_RATE(1008000000, 168, 1, 2),
+	PLL_RATE(1104000000, 184, 1, 2),
+	PLL_RATE(1200000000, 200, 1, 2),
+	PLL_RATE(1296000000, 216, 1, 2),
+	PLL_RATE(1398000000, 233, 1, 2),
+	PLL_RATE(1494000000, 249, 1, 2),
+	PLL_RATE(1512000000, 126, 1, 1),
+	PLL_RATE(1608000000, 134, 1, 1),
+	PLL_RATE(1704000000, 142, 1, 1),
+	PLL_RATE(1800000000, 150, 1, 1),
+	PLL_RATE(1896000000, 158, 1, 1),
+	PLL_RATE(1908000000, 159, 1, 1),
+	PLL_RATE(1920000000, 160, 1, 1),
+	PLL_RATE(2016000000, 168, 1, 1),
+	PLL_RATE(2100000000, 175, 1, 1),
+	PLL_RATE(2196000000, 183, 1, 1),
+	PLL_RATE(2292000000, 191, 1, 1),
+	PLL_RATE(2400000000, 200, 1, 1),
+	PLL_RATE(2496000000, 208, 1, 1),
+	PLL_RATE(2592000000, 216, 1, 1),
+	PLL_RATE(2700000000, 225, 1, 1),
+	PLL_RATE(2796000000, 233, 1, 1),
+	PLL_RATE(2892000000, 241, 1, 1),
+	PLL_RATE(3000000000, 125, 1, 0),
+	PLL_RATE(3096000000, 129, 1, 0),
+	PLL_RATE(3192000000, 133, 1, 0),
+	PLL_RATE(3288000000, 137, 1, 0),
+	PLL_RATE(3408000000, 142, 1, 0),
+	PLL_RATE(3504000000, 146, 1, 0),
+	PLL_RATE(3600000000, 150, 1, 0),
+	PLL_RATE(3696000000, 154, 1, 0),
+	PLL_RATE(3792000000, 158, 1, 0),
+	PLL_RATE(3888000000, 162, 1, 0),
+	PLL_RATE(4008000000, 167, 1, 0),
+	PLL_RATE(4104000000, 171, 1, 0),
+	PLL_RATE(4200000000, 175, 1, 0),
+	PLL_RATE(4296000000, 179, 1, 0),
+	PLL_RATE(4392000000, 183, 1, 0),
+	PLL_RATE(4488000000, 187, 1, 0),
+	PLL_RATE(4608000000, 192, 1, 0),
+	PLL_RATE(4704000000, 196, 1, 0),
+	PLL_RATE(4800000000, 200, 1, 0),
+	PLL_RATE(4896000000, 204, 1, 0),
+	PLL_RATE(4992000000, 208, 1, 0),
+	PLL_RATE(5088000000, 212, 1, 0),
+	PLL_RATE(5208000000, 217, 1, 0),
+	PLL_RATE(5304000000, 221, 1, 0),
+	PLL_RATE(5400000000, 225, 1, 0),
+	PLL_RATE(5496000000, 229, 1, 0),
+	PLL_RATE(5592000000, 233, 1, 0),
+	PLL_RATE(5688000000, 237, 1, 0),
+	PLL_RATE(5808000000, 242, 1, 0),
+	PLL_RATE(5904000000, 246, 1, 0),
+	PLL_RATE(6000000000, 250, 1, 0),
+	{ /* sentinel */ },
+};
+
+static const struct reg_sequence g12a_gp0_init_regs[] = {
+	{ .reg = HHI_GP0_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_GP0_PLL_CNTL4,	.def = 0x33771290 },
+	{ .reg = HHI_GP0_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_GP0_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_gp0_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.frac = {
+			.reg_off = HHI_GP0_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_gp0_init_regs,
+		.init_count = ARRAY_SIZE(g12a_gp0_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_hifi_init_regs[] = {
+	{ .reg = HHI_HIFI_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL3,	.def = 0x6a285c00 },
+	{ .reg = HHI_HIFI_PLL_CNTL4,	.def = 0x65771290 },
+	{ .reg = HHI_HIFI_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_HIFI_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_hifi_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_HIFI_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_hifi_init_regs,
+		.init_count = ARRAY_SIZE(g12a_hifi_init_regs),
+		.flags = CLK_MESON_PLL_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "hifi_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div3 = {
+	.mult = 1,
+	.div = 3,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div4 = {
+	.mult = 1,
+	.div = 4,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div5 = {
+	.mult = 1,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div7 = {
+	.mult = 1,
+	.div = 7,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL1,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll1_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL3,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll2_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll2 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL5,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll2_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll3_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll3 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL7,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll3_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+	"fclk_div3", "fclk_div5"
+};
+
+static struct clk_regmap g12a_mpeg_clk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 12,
+		.table = mux_table_clk81,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_names = clk81_parent_names,
+		.num_parents = ARRAY_SIZE(clk81_parent_names),
+	},
+};
+
+static struct clk_regmap g12a_mpeg_clk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_clk81 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "clk81",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_div" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+	},
+};
+
+static const char * const g12a_sd_emmc_clk0_parent_names[] = {
+	"xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+	/*
+	 * Following these parent clocks, we should also have had mpll2, mpll3
+	 * and gp0_pll but these clocks are too precious to be used here. All
+	 * the necessary rates for MMC and NAND operation can be acheived using
+	 * xtal or fclk_div clocks
+	 */
+};
+
+/* SDcard clock */
+static struct clk_regmap g12a_sd_emmc_b_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 25,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.shift = 16,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.bit_idx = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_b_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* EMMC/NAND clock */
+static struct clk_regmap g12a_sd_emmc_c_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 9,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_c_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(g12a_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(g12a_dos, HHI_GCLK_MPEG0, 1);
+static MESON_GATE(g12a_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(g12a_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(g12a_eth_phy, HHI_GCLK_MPEG0, 4);
+static MESON_GATE(g12a_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(g12a_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(g12a_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(g12a_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(g12a_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(g12a_sana, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(g12a_sd, HHI_GCLK_MPEG0, 11);
+static MESON_GATE(g12a_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(g12a_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(g12a_spicc_1, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(g12a_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(g12a_mipi_dsi_phy, HHI_GCLK_MPEG0, 20);
+static MESON_GATE(g12a_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(g12a_emmc_a, HHI_GCLK_MPEG0, 24);
+static MESON_GATE(g12a_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(g12a_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(g12a_audio_codec, HHI_GCLK_MPEG0, 28);
+
+static MESON_GATE(g12a_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(g12a_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(g12a_demux, HHI_GCLK_MPEG1, 4);
+static MESON_GATE(g12a_audio_ififo, HHI_GCLK_MPEG1, 11);
+static MESON_GATE(g12a_adc, HHI_GCLK_MPEG1, 13);
+static MESON_GATE(g12a_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(g12a_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(g12a_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(g12a_pcie_comb, HHI_GCLK_MPEG1, 24);
+static MESON_GATE(g12a_parser, HHI_GCLK_MPEG1, 25);
+static MESON_GATE(g12a_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(g12a_pcie_phy, HHI_GCLK_MPEG1, 27);
+static MESON_GATE(g12a_ahb_arb0, HHI_GCLK_MPEG1, 29);
+
+static MESON_GATE(g12a_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(g12a_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(g12a_htx_hdcp22, HHI_GCLK_MPEG2, 3);
+static MESON_GATE(g12a_htx_pclk, HHI_GCLK_MPEG2, 4);
+static MESON_GATE(g12a_bt656, HHI_GCLK_MPEG2, 6);
+static MESON_GATE(g12a_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(g12a_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(g12a_uart2, HHI_GCLK_MPEG2, 15);
+static MESON_GATE(g12a_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(g12a_gic, HHI_GCLK_MPEG2, 30);
+
+static MESON_GATE(g12a_vclk2_venci0, HHI_GCLK_OTHER, 1);
+static MESON_GATE(g12a_vclk2_venci1, HHI_GCLK_OTHER, 2);
+static MESON_GATE(g12a_vclk2_vencp0, HHI_GCLK_OTHER, 3);
+static MESON_GATE(g12a_vclk2_vencp1, HHI_GCLK_OTHER, 4);
+static MESON_GATE(g12a_vclk2_venct0, HHI_GCLK_OTHER, 5);
+static MESON_GATE(g12a_vclk2_venct1, HHI_GCLK_OTHER, 6);
+static MESON_GATE(g12a_vclk2_other, HHI_GCLK_OTHER, 7);
+static MESON_GATE(g12a_vclk2_enci, HHI_GCLK_OTHER, 8);
+static MESON_GATE(g12a_vclk2_encp, HHI_GCLK_OTHER, 9);
+static MESON_GATE(g12a_dac_clk, HHI_GCLK_OTHER, 10);
+static MESON_GATE(g12a_aoclk_gate, HHI_GCLK_OTHER, 14);
+static MESON_GATE(g12a_iec958_gate, HHI_GCLK_OTHER, 16);
+static MESON_GATE(g12a_enc480p, HHI_GCLK_OTHER, 20);
+static MESON_GATE(g12a_rng1, HHI_GCLK_OTHER, 21);
+static MESON_GATE(g12a_vclk2_enct, HHI_GCLK_OTHER, 22);
+static MESON_GATE(g12a_vclk2_encl, HHI_GCLK_OTHER, 23);
+static MESON_GATE(g12a_vclk2_venclmmc, HHI_GCLK_OTHER, 24);
+static MESON_GATE(g12a_vclk2_vencl, HHI_GCLK_OTHER, 25);
+static MESON_GATE(g12a_vclk2_other1, HHI_GCLK_OTHER, 26);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data g12a_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]			= &g12a_sys_pll.hw,
+		[CLKID_FIXED_PLL]		= &g12a_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]		= &g12a_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]		= &g12a_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]		= &g12a_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]		= &g12a_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]		= &g12a_fclk_div7.hw,
+		[CLKID_GP0_PLL]			= &g12a_gp0_pll.hw,
+		[CLKID_MPEG_SEL]		= &g12a_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]		= &g12a_mpeg_clk_div.hw,
+		[CLKID_CLK81]			= &g12a_clk81.hw,
+		[CLKID_MPLL0]			= &g12a_mpll0.hw,
+		[CLKID_MPLL1]			= &g12a_mpll1.hw,
+		[CLKID_MPLL2]			= &g12a_mpll2.hw,
+		[CLKID_MPLL3]			= &g12a_mpll3.hw,
+		[CLKID_DDR]			= &g12a_ddr.hw,
+		[CLKID_DOS]			= &g12a_dos.hw,
+		[CLKID_AUDIO_LOCKER]		= &g12a_audio_locker.hw,
+		[CLKID_MIPI_DSI_HOST]		= &g12a_mipi_dsi_host.hw,
+		[CLKID_ETH_PHY]			= &g12a_eth_phy.hw,
+		[CLKID_ISA]			= &g12a_isa.hw,
+		[CLKID_PL301]			= &g12a_pl301.hw,
+		[CLKID_PERIPHS]			= &g12a_periphs.hw,
+		[CLKID_SPICC0]			= &g12a_spicc_0.hw,
+		[CLKID_I2C]			= &g12a_i2c.hw,
+		[CLKID_SANA]			= &g12a_sana.hw,
+		[CLKID_SD]			= &g12a_sd.hw,
+		[CLKID_RNG0]			= &g12a_rng0.hw,
+		[CLKID_UART0]			= &g12a_uart0.hw,
+		[CLKID_SPICC1]			= &g12a_spicc_1.hw,
+		[CLKID_HIU_IFACE]		= &g12a_hiu_reg.hw,
+		[CLKID_MIPI_DSI_PHY]		= &g12a_mipi_dsi_phy.hw,
+		[CLKID_ASSIST_MISC]		= &g12a_assist_misc.hw,
+		[CLKID_SD_EMMC_A]		= &g12a_emmc_a.hw,
+		[CLKID_SD_EMMC_B]		= &g12a_emmc_b.hw,
+		[CLKID_SD_EMMC_C]		= &g12a_emmc_c.hw,
+		[CLKID_AUDIO_CODEC]		= &g12a_audio_codec.hw,
+		[CLKID_AUDIO]			= &g12a_audio.hw,
+		[CLKID_ETH]			= &g12a_eth_core.hw,
+		[CLKID_DEMUX]			= &g12a_demux.hw,
+		[CLKID_AUDIO_IFIFO]		= &g12a_audio_ififo.hw,
+		[CLKID_ADC]			= &g12a_adc.hw,
+		[CLKID_UART1]			= &g12a_uart1.hw,
+		[CLKID_G2D]			= &g12a_g2d.hw,
+		[CLKID_RESET]			= &g12a_reset.hw,
+		[CLKID_PCIE_COMB]		= &g12a_pcie_comb.hw,
+		[CLKID_PARSER]			= &g12a_parser.hw,
+		[CLKID_USB]			= &g12a_usb_general.hw,
+		[CLKID_PCIE_PHY]		= &g12a_pcie_phy.hw,
+		[CLKID_AHB_ARB0]		= &g12a_ahb_arb0.hw,
+		[CLKID_AHB_DATA_BUS]		= &g12a_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]		= &g12a_ahb_ctrl_bus.hw,
+		[CLKID_HTX_HDCP22]		= &g12a_htx_hdcp22.hw,
+		[CLKID_HTX_PCLK]		= &g12a_htx_pclk.hw,
+		[CLKID_BT656]			= &g12a_bt656.hw,
+		[CLKID_USB1_DDR_BRIDGE]		= &g12a_usb1_to_ddr.hw,
+		[CLKID_MMC_PCLK]		= &g12a_mmc_pclk.hw,
+		[CLKID_UART2]			= &g12a_uart2.hw,
+		[CLKID_VPU_INTR]		= &g12a_vpu_intr.hw,
+		[CLKID_GIC]			= &g12a_gic.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]	= &g12a_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]	= &g12a_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]		= &g12a_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]	= &g12a_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]	= &g12a_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]		= &g12a_sd_emmc_c_clk0.hw,
+		[CLKID_MPLL0_DIV]		= &g12a_mpll0_div.hw,
+		[CLKID_MPLL1_DIV]		= &g12a_mpll1_div.hw,
+		[CLKID_MPLL2_DIV]		= &g12a_mpll2_div.hw,
+		[CLKID_MPLL3_DIV]		= &g12a_mpll3_div.hw,
+		[CLKID_HIFI_PLL]		= &g12a_hifi_pll.hw,
+		[CLKID_VCLK2_VENCI0]		= &g12a_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]		= &g12a_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]		= &g12a_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]		= &g12a_vclk2_vencp1.hw,
+		[CLKID_VCLK2_VENCT0]		= &g12a_vclk2_venct0.hw,
+		[CLKID_VCLK2_VENCT1]		= &g12a_vclk2_venct1.hw,
+		[CLKID_VCLK2_OTHER]		= &g12a_vclk2_other.hw,
+		[CLKID_VCLK2_ENCI]		= &g12a_vclk2_enci.hw,
+		[CLKID_VCLK2_ENCP]		= &g12a_vclk2_encp.hw,
+		[CLKID_DAC_CLK]			= &g12a_dac_clk.hw,
+		[CLKID_AOCLK]			= &g12a_aoclk_gate.hw,
+		[CLKID_IEC958]			= &g12a_iec958_gate.hw,
+		[CLKID_ENC480P]			= &g12a_enc480p.hw,
+		[CLKID_RNG1]			= &g12a_rng1.hw,
+		[CLKID_VCLK2_ENCT]		= &g12a_vclk2_enct.hw,
+		[CLKID_VCLK2_ENCL]		= &g12a_vclk2_encl.hw,
+		[CLKID_VCLK2_VENCLMMC]		= &g12a_vclk2_venclmmc.hw,
+		[CLKID_VCLK2_VENCL]		= &g12a_vclk2_vencl.hw,
+		[CLKID_VCLK2_OTHER1]		= &g12a_vclk2_other1.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const g12a_clk_regmaps[] = {
+	&g12a_clk81,
+	&g12a_dos,
+	&g12a_ddr,
+	&g12a_audio_locker,
+	&g12a_mipi_dsi_host,
+	&g12a_eth_phy,
+	&g12a_isa,
+	&g12a_pl301,
+	&g12a_periphs,
+	&g12a_spicc_0,
+	&g12a_i2c,
+	&g12a_sana,
+	&g12a_sd,
+	&g12a_rng0,
+	&g12a_uart0,
+	&g12a_spicc_1,
+	&g12a_hiu_reg,
+	&g12a_mipi_dsi_phy,
+	&g12a_assist_misc,
+	&g12a_emmc_a,
+	&g12a_emmc_b,
+	&g12a_emmc_c,
+	&g12a_audio_codec,
+	&g12a_audio,
+	&g12a_eth_core,
+	&g12a_demux,
+	&g12a_audio_ififo,
+	&g12a_adc,
+	&g12a_uart1,
+	&g12a_g2d,
+	&g12a_reset,
+	&g12a_pcie_comb,
+	&g12a_parser,
+	&g12a_usb_general,
+	&g12a_pcie_phy,
+	&g12a_ahb_arb0,
+	&g12a_ahb_data_bus,
+	&g12a_ahb_ctrl_bus,
+	&g12a_htx_hdcp22,
+	&g12a_htx_pclk,
+	&g12a_bt656,
+	&g12a_usb1_to_ddr,
+	&g12a_mmc_pclk,
+	&g12a_vpu_intr,
+	&g12a_gic,
+	&g12a_sd_emmc_b_clk0,
+	&g12a_sd_emmc_c_clk0,
+	&g12a_mpeg_clk_div,
+	&g12a_sd_emmc_b_clk0_div,
+	&g12a_sd_emmc_c_clk0_div,
+	&g12a_mpeg_clk_sel,
+	&g12a_sd_emmc_b_clk0_sel,
+	&g12a_sd_emmc_c_clk0_sel,
+	&g12a_mpll0,
+	&g12a_mpll1,
+	&g12a_mpll2,
+	&g12a_mpll3,
+	&g12a_mpll0_div,
+	&g12a_mpll1_div,
+	&g12a_mpll2_div,
+	&g12a_mpll3_div,
+	&g12a_fixed_pll,
+	&g12a_sys_pll,
+	&g12a_gp0_pll,
+	&g12a_hifi_pll,
+	&g12a_vclk2_venci0,
+	&g12a_vclk2_venci1,
+	&g12a_vclk2_vencp0,
+	&g12a_vclk2_vencp1,
+	&g12a_vclk2_venct0,
+	&g12a_vclk2_venct1,
+	&g12a_vclk2_other,
+	&g12a_vclk2_enci,
+	&g12a_vclk2_encp,
+	&g12a_dac_clk,
+	&g12a_aoclk_gate,
+	&g12a_iec958_gate,
+	&g12a_enc480p,
+	&g12a_rng1,
+	&g12a_vclk2_enct,
+	&g12a_vclk2_encl,
+	&g12a_vclk2_venclmmc,
+	&g12a_vclk2_vencl,
+	&g12a_vclk2_other1,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+	{ .compatible = "amlogic,g12a-clkc" },
+	{}
+};
+
+static const struct regmap_config clkc_regmap_config = {
+	.reg_bits       = 32,
+	.val_bits       = 32,
+	.reg_stride     = 4,
+};
+
+static int g12a_clkc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *map;
+	int ret, i;
+
+	/* Get the hhi system controller node if available */
+	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	if (IS_ERR(map)) {
+		dev_err(dev,
+			"failed to get HHI regmap\n");
+		return PTR_ERR(map);
+	}
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(g12a_clk_regmaps); i++)
+		g12a_clk_regmaps[i]->map = map;
+
+	for (i = 0; i < g12a_hw_onecell_data.num; i++) {
+		/* array might be sparse */
+		if (!g12a_hw_onecell_data.hws[i])
+			continue;
+
+		ret = devm_clk_hw_register(dev, g12a_hw_onecell_data.hws[i]);
+		if (ret) {
+			dev_err(dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &g12a_hw_onecell_data);
+}
+
+static struct platform_driver g12a_driver = {
+	.probe		= g12a_clkc_probe,
+	.driver		= {
+		.name	= "g12a-clkc",
+		.of_match_table = clkc_match_table,
+	},
+};
+
+builtin_platform_driver(g12a_driver);
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
new file mode 100644
index 0000000..a284b06
--- /dev/null
+++ b/drivers/clk/meson/g12a.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 Amlogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ */
+#ifndef __G12A_H
+#define __G12A_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_MIPI_CNTL0			0x000
+#define HHI_MIPI_CNTL1			0x004
+#define HHI_MIPI_CNTL2			0x008
+#define HHI_MIPI_STS			0x00C
+#define HHI_GP0_PLL_CNTL0		0x040
+#define HHI_GP0_PLL_CNTL1		0x044
+#define HHI_GP0_PLL_CNTL2		0x048
+#define HHI_GP0_PLL_CNTL3		0x04C
+#define HHI_GP0_PLL_CNTL4		0x050
+#define HHI_GP0_PLL_CNTL5		0x054
+#define HHI_GP0_PLL_CNTL6		0x058
+#define HHI_GP0_PLL_STS			0x05C
+#define HHI_PCIE_PLL_CNTL0		0x098
+#define HHI_PCIE_PLL_CNTL1		0x09C
+#define HHI_PCIE_PLL_CNTL2		0x0A0
+#define HHI_PCIE_PLL_CNTL3		0x0A4
+#define HHI_PCIE_PLL_CNTL4		0x0A8
+#define HHI_PCIE_PLL_CNTL5		0x0AC
+#define HHI_PCIE_PLL_STS		0x0B8
+#define HHI_HIFI_PLL_CNTL0		0x0D8
+#define HHI_HIFI_PLL_CNTL1		0x0DC
+#define HHI_HIFI_PLL_CNTL2		0x0E0
+#define HHI_HIFI_PLL_CNTL3		0x0E4
+#define HHI_HIFI_PLL_CNTL4		0x0E8
+#define HHI_HIFI_PLL_CNTL5		0x0EC
+#define HHI_HIFI_PLL_CNTL6		0x0F0
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_AUD_CLK_CNTL		0x178
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0	0x19c
+#define HHI_MALI_CLK_CNTL		0x1b0
+#define HHI_VPU_CLKC_CNTL		0x1b4
+#define HHI_VPU_CLK_CNTL		0x1bC
+#define HHI_HDMI_CLK_CNTL		0x1CC
+#define HHI_VDEC_CLK_CNTL		0x1E0
+#define HHI_VDEC2_CLK_CNTL		0x1E4
+#define HHI_VDEC3_CLK_CNTL		0x1E8
+#define HHI_VDEC4_CLK_CNTL		0x1EC
+#define HHI_HDCP22_CLK_CNTL		0x1F0
+#define HHI_VAPBCLK_CNTL		0x1F4
+#define HHI_VPU_CLKB_CNTL		0x20C
+#define HHI_GEN_CLK_CNTL		0x228
+#define HHI_VDIN_MEAS_CLK_CNTL	0x250
+#define HHI_MIPIDSI_PHY_CLK_CNTL	0x254
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL	0x264
+#define HHI_MPLL_CNTL0			0x278
+#define HHI_MPLL_CNTL1			0x27C
+#define HHI_MPLL_CNTL2			0x280
+#define HHI_MPLL_CNTL3			0x284
+#define HHI_MPLL_CNTL4			0x288
+#define HHI_MPLL_CNTL5			0x28c
+#define HHI_MPLL_CNTL6			0x290
+#define HHI_MPLL_CNTL7			0x294
+#define HHI_MPLL_CNTL8			0x298
+#define HHI_FIX_PLL_CNTL0		0x2A0
+#define HHI_FIX_PLL_CNTL1		0x2A4
+#define HHI_SYS_PLL_CNTL0		0x2f4
+#define HHI_SYS_PLL_CNTL1		0x2f8
+#define HHI_SYS_PLL_CNTL2		0x2fc
+#define HHI_SYS_PLL_CNTL3		0x300
+#define HHI_SYS_PLL_CNTL4		0x304
+#define HHI_SYS_PLL_CNTL5		0x308
+#define HHI_SYS_PLL_CNTL6		0x30c
+#define HHI_SPICC_CLK_CNTL		0x3dc
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL	62
+#define CLKID_SD_EMMC_B_CLK0_DIV	63
+#define CLKID_SD_EMMC_C_CLK0_SEL	64
+#define CLKID_SD_EMMC_C_CLK0_DIV	65
+#define CLKID_MPLL0_DIV				66
+#define CLKID_MPLL1_DIV				67
+#define CLKID_MPLL2_DIV				68
+#define CLKID_MPLL3_DIV				69
+#define CLKID_MPLL_PREDIV			70
+#define CLKID_FCLK_DIV2_DIV			72
+#define CLKID_FCLK_DIV3_DIV			73
+#define CLKID_FCLK_DIV4_DIV			74
+#define CLKID_FCLK_DIV5_DIV			75
+#define CLKID_FCLK_DIV7_DIV			76
+#define NR_CLKS						96
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/g12a-clkc.h>
+
+#endif /* __G12A_H */
-- 
1.9.1

[RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part
of the Amlogic Meson-G12A SoC.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 drivers/clk/meson/Kconfig  |  10 +
 drivers/clk/meson/Makefile |   1 +
 drivers/clk/meson/g12a.c   | 994 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.h   | 122 ++++++
 4 files changed, 1127 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..16edad8 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -54,3 +54,13 @@ config COMMON_CLK_AXG_AUDIO
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
 	  aka axg, Say Y if you want audio subsystem to work.
+
+config COMMON_CLK_G12A
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	select RESET_CONTROLLER
+	select COMMON_CLK_REGMAP_MESON
+	select MFD_SYSCON
+	help
+	  Support for the clock controller on Amlogic S905D2 devices, aka g12a.
+	  Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 72ec8c4..2b1a562 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
+obj-$(CONFIG_COMMON_CLK_G12A)	 += g12a.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
new file mode 100644
index 0000000..c0285ec
--- /dev/null
+++ b/drivers/clk/meson/g12a.c
@@ -0,0 +1,994 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-G12A Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clkc.h"
+#include "g12a.h"
+
+static DEFINE_SPINLOCK(meson_clk_lock);
+
+static struct clk_regmap g12a_fixed_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_FIX_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_sys_init_regs[] = {
+	{ .reg = HHI_SYS_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_SYS_PLL_CNTL4,	.def = 0x88770290 },
+	{ .reg = HHI_SYS_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_SYS_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_sys_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.l = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.init_regs = g12a_sys_init_regs,
+		.init_count = ARRAY_SIZE(g12a_sys_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static const struct pll_rate_table g12a_gp0_pll_rate_table[] = {
+	PLL_RATE(24000000,  128, 1, 7),
+	PLL_RATE(48000000,  128, 1, 6),
+	PLL_RATE(96000000,  128, 1, 5),
+	PLL_RATE(192000000,  128, 1, 4),
+	PLL_RATE(312000000,  208, 1, 4),
+	PLL_RATE(408000000,  136, 1, 3),
+	PLL_RATE(600000000,  200, 1, 3),
+	PLL_RATE(696000000,  232, 1, 3),
+	PLL_RATE(792000000,  132, 1, 2),
+	PLL_RATE(846000000,  141, 1, 2),
+	PLL_RATE(912000000,  152, 1, 2),
+	PLL_RATE(1008000000, 168, 1, 2),
+	PLL_RATE(1104000000, 184, 1, 2),
+	PLL_RATE(1200000000, 200, 1, 2),
+	PLL_RATE(1296000000, 216, 1, 2),
+	PLL_RATE(1398000000, 233, 1, 2),
+	PLL_RATE(1494000000, 249, 1, 2),
+	PLL_RATE(1512000000, 126, 1, 1),
+	PLL_RATE(1608000000, 134, 1, 1),
+	PLL_RATE(1704000000, 142, 1, 1),
+	PLL_RATE(1800000000, 150, 1, 1),
+	PLL_RATE(1896000000, 158, 1, 1),
+	PLL_RATE(1908000000, 159, 1, 1),
+	PLL_RATE(1920000000, 160, 1, 1),
+	PLL_RATE(2016000000, 168, 1, 1),
+	PLL_RATE(2100000000, 175, 1, 1),
+	PLL_RATE(2196000000, 183, 1, 1),
+	PLL_RATE(2292000000, 191, 1, 1),
+	PLL_RATE(2400000000, 200, 1, 1),
+	PLL_RATE(2496000000, 208, 1, 1),
+	PLL_RATE(2592000000, 216, 1, 1),
+	PLL_RATE(2700000000, 225, 1, 1),
+	PLL_RATE(2796000000, 233, 1, 1),
+	PLL_RATE(2892000000, 241, 1, 1),
+	PLL_RATE(3000000000, 125, 1, 0),
+	PLL_RATE(3096000000, 129, 1, 0),
+	PLL_RATE(3192000000, 133, 1, 0),
+	PLL_RATE(3288000000, 137, 1, 0),
+	PLL_RATE(3408000000, 142, 1, 0),
+	PLL_RATE(3504000000, 146, 1, 0),
+	PLL_RATE(3600000000, 150, 1, 0),
+	PLL_RATE(3696000000, 154, 1, 0),
+	PLL_RATE(3792000000, 158, 1, 0),
+	PLL_RATE(3888000000, 162, 1, 0),
+	PLL_RATE(4008000000, 167, 1, 0),
+	PLL_RATE(4104000000, 171, 1, 0),
+	PLL_RATE(4200000000, 175, 1, 0),
+	PLL_RATE(4296000000, 179, 1, 0),
+	PLL_RATE(4392000000, 183, 1, 0),
+	PLL_RATE(4488000000, 187, 1, 0),
+	PLL_RATE(4608000000, 192, 1, 0),
+	PLL_RATE(4704000000, 196, 1, 0),
+	PLL_RATE(4800000000, 200, 1, 0),
+	PLL_RATE(4896000000, 204, 1, 0),
+	PLL_RATE(4992000000, 208, 1, 0),
+	PLL_RATE(5088000000, 212, 1, 0),
+	PLL_RATE(5208000000, 217, 1, 0),
+	PLL_RATE(5304000000, 221, 1, 0),
+	PLL_RATE(5400000000, 225, 1, 0),
+	PLL_RATE(5496000000, 229, 1, 0),
+	PLL_RATE(5592000000, 233, 1, 0),
+	PLL_RATE(5688000000, 237, 1, 0),
+	PLL_RATE(5808000000, 242, 1, 0),
+	PLL_RATE(5904000000, 246, 1, 0),
+	PLL_RATE(6000000000, 250, 1, 0),
+	{ /* sentinel */ },
+};
+
+static const struct reg_sequence g12a_gp0_init_regs[] = {
+	{ .reg = HHI_GP0_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_GP0_PLL_CNTL4,	.def = 0x33771290 },
+	{ .reg = HHI_GP0_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_GP0_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_gp0_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.frac = {
+			.reg_off = HHI_GP0_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_gp0_init_regs,
+		.init_count = ARRAY_SIZE(g12a_gp0_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_hifi_init_regs[] = {
+	{ .reg = HHI_HIFI_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL3,	.def = 0x6a285c00 },
+	{ .reg = HHI_HIFI_PLL_CNTL4,	.def = 0x65771290 },
+	{ .reg = HHI_HIFI_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_HIFI_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_hifi_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_HIFI_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_hifi_init_regs,
+		.init_count = ARRAY_SIZE(g12a_hifi_init_regs),
+		.flags = CLK_MESON_PLL_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "hifi_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div3 = {
+	.mult = 1,
+	.div = 3,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div4 = {
+	.mult = 1,
+	.div = 4,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div5 = {
+	.mult = 1,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div7 = {
+	.mult = 1,
+	.div = 7,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL1,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll1_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL3,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll2_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll2 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL5,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll2_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll3_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll3 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL7,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll3_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+	"fclk_div3", "fclk_div5"
+};
+
+static struct clk_regmap g12a_mpeg_clk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 12,
+		.table = mux_table_clk81,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_names = clk81_parent_names,
+		.num_parents = ARRAY_SIZE(clk81_parent_names),
+	},
+};
+
+static struct clk_regmap g12a_mpeg_clk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_clk81 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "clk81",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_div" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+	},
+};
+
+static const char * const g12a_sd_emmc_clk0_parent_names[] = {
+	"xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+	/*
+	 * Following these parent clocks, we should also have had mpll2, mpll3
+	 * and gp0_pll but these clocks are too precious to be used here. All
+	 * the necessary rates for MMC and NAND operation can be acheived using
+	 * xtal or fclk_div clocks
+	 */
+};
+
+/* SDcard clock */
+static struct clk_regmap g12a_sd_emmc_b_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 25,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.shift = 16,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.bit_idx = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_b_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* EMMC/NAND clock */
+static struct clk_regmap g12a_sd_emmc_c_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 9,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_c_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(g12a_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(g12a_dos, HHI_GCLK_MPEG0, 1);
+static MESON_GATE(g12a_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(g12a_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(g12a_eth_phy, HHI_GCLK_MPEG0, 4);
+static MESON_GATE(g12a_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(g12a_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(g12a_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(g12a_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(g12a_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(g12a_sana, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(g12a_sd, HHI_GCLK_MPEG0, 11);
+static MESON_GATE(g12a_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(g12a_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(g12a_spicc_1, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(g12a_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(g12a_mipi_dsi_phy, HHI_GCLK_MPEG0, 20);
+static MESON_GATE(g12a_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(g12a_emmc_a, HHI_GCLK_MPEG0, 24);
+static MESON_GATE(g12a_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(g12a_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(g12a_audio_codec, HHI_GCLK_MPEG0, 28);
+
+static MESON_GATE(g12a_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(g12a_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(g12a_demux, HHI_GCLK_MPEG1, 4);
+static MESON_GATE(g12a_audio_ififo, HHI_GCLK_MPEG1, 11);
+static MESON_GATE(g12a_adc, HHI_GCLK_MPEG1, 13);
+static MESON_GATE(g12a_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(g12a_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(g12a_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(g12a_pcie_comb, HHI_GCLK_MPEG1, 24);
+static MESON_GATE(g12a_parser, HHI_GCLK_MPEG1, 25);
+static MESON_GATE(g12a_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(g12a_pcie_phy, HHI_GCLK_MPEG1, 27);
+static MESON_GATE(g12a_ahb_arb0, HHI_GCLK_MPEG1, 29);
+
+static MESON_GATE(g12a_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(g12a_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(g12a_htx_hdcp22, HHI_GCLK_MPEG2, 3);
+static MESON_GATE(g12a_htx_pclk, HHI_GCLK_MPEG2, 4);
+static MESON_GATE(g12a_bt656, HHI_GCLK_MPEG2, 6);
+static MESON_GATE(g12a_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(g12a_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(g12a_uart2, HHI_GCLK_MPEG2, 15);
+static MESON_GATE(g12a_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(g12a_gic, HHI_GCLK_MPEG2, 30);
+
+static MESON_GATE(g12a_vclk2_venci0, HHI_GCLK_OTHER, 1);
+static MESON_GATE(g12a_vclk2_venci1, HHI_GCLK_OTHER, 2);
+static MESON_GATE(g12a_vclk2_vencp0, HHI_GCLK_OTHER, 3);
+static MESON_GATE(g12a_vclk2_vencp1, HHI_GCLK_OTHER, 4);
+static MESON_GATE(g12a_vclk2_venct0, HHI_GCLK_OTHER, 5);
+static MESON_GATE(g12a_vclk2_venct1, HHI_GCLK_OTHER, 6);
+static MESON_GATE(g12a_vclk2_other, HHI_GCLK_OTHER, 7);
+static MESON_GATE(g12a_vclk2_enci, HHI_GCLK_OTHER, 8);
+static MESON_GATE(g12a_vclk2_encp, HHI_GCLK_OTHER, 9);
+static MESON_GATE(g12a_dac_clk, HHI_GCLK_OTHER, 10);
+static MESON_GATE(g12a_aoclk_gate, HHI_GCLK_OTHER, 14);
+static MESON_GATE(g12a_iec958_gate, HHI_GCLK_OTHER, 16);
+static MESON_GATE(g12a_enc480p, HHI_GCLK_OTHER, 20);
+static MESON_GATE(g12a_rng1, HHI_GCLK_OTHER, 21);
+static MESON_GATE(g12a_vclk2_enct, HHI_GCLK_OTHER, 22);
+static MESON_GATE(g12a_vclk2_encl, HHI_GCLK_OTHER, 23);
+static MESON_GATE(g12a_vclk2_venclmmc, HHI_GCLK_OTHER, 24);
+static MESON_GATE(g12a_vclk2_vencl, HHI_GCLK_OTHER, 25);
+static MESON_GATE(g12a_vclk2_other1, HHI_GCLK_OTHER, 26);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data g12a_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]			= &g12a_sys_pll.hw,
+		[CLKID_FIXED_PLL]		= &g12a_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]		= &g12a_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]		= &g12a_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]		= &g12a_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]		= &g12a_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]		= &g12a_fclk_div7.hw,
+		[CLKID_GP0_PLL]			= &g12a_gp0_pll.hw,
+		[CLKID_MPEG_SEL]		= &g12a_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]		= &g12a_mpeg_clk_div.hw,
+		[CLKID_CLK81]			= &g12a_clk81.hw,
+		[CLKID_MPLL0]			= &g12a_mpll0.hw,
+		[CLKID_MPLL1]			= &g12a_mpll1.hw,
+		[CLKID_MPLL2]			= &g12a_mpll2.hw,
+		[CLKID_MPLL3]			= &g12a_mpll3.hw,
+		[CLKID_DDR]			= &g12a_ddr.hw,
+		[CLKID_DOS]			= &g12a_dos.hw,
+		[CLKID_AUDIO_LOCKER]		= &g12a_audio_locker.hw,
+		[CLKID_MIPI_DSI_HOST]		= &g12a_mipi_dsi_host.hw,
+		[CLKID_ETH_PHY]			= &g12a_eth_phy.hw,
+		[CLKID_ISA]			= &g12a_isa.hw,
+		[CLKID_PL301]			= &g12a_pl301.hw,
+		[CLKID_PERIPHS]			= &g12a_periphs.hw,
+		[CLKID_SPICC0]			= &g12a_spicc_0.hw,
+		[CLKID_I2C]			= &g12a_i2c.hw,
+		[CLKID_SANA]			= &g12a_sana.hw,
+		[CLKID_SD]			= &g12a_sd.hw,
+		[CLKID_RNG0]			= &g12a_rng0.hw,
+		[CLKID_UART0]			= &g12a_uart0.hw,
+		[CLKID_SPICC1]			= &g12a_spicc_1.hw,
+		[CLKID_HIU_IFACE]		= &g12a_hiu_reg.hw,
+		[CLKID_MIPI_DSI_PHY]		= &g12a_mipi_dsi_phy.hw,
+		[CLKID_ASSIST_MISC]		= &g12a_assist_misc.hw,
+		[CLKID_SD_EMMC_A]		= &g12a_emmc_a.hw,
+		[CLKID_SD_EMMC_B]		= &g12a_emmc_b.hw,
+		[CLKID_SD_EMMC_C]		= &g12a_emmc_c.hw,
+		[CLKID_AUDIO_CODEC]		= &g12a_audio_codec.hw,
+		[CLKID_AUDIO]			= &g12a_audio.hw,
+		[CLKID_ETH]			= &g12a_eth_core.hw,
+		[CLKID_DEMUX]			= &g12a_demux.hw,
+		[CLKID_AUDIO_IFIFO]		= &g12a_audio_ififo.hw,
+		[CLKID_ADC]			= &g12a_adc.hw,
+		[CLKID_UART1]			= &g12a_uart1.hw,
+		[CLKID_G2D]			= &g12a_g2d.hw,
+		[CLKID_RESET]			= &g12a_reset.hw,
+		[CLKID_PCIE_COMB]		= &g12a_pcie_comb.hw,
+		[CLKID_PARSER]			= &g12a_parser.hw,
+		[CLKID_USB]			= &g12a_usb_general.hw,
+		[CLKID_PCIE_PHY]		= &g12a_pcie_phy.hw,
+		[CLKID_AHB_ARB0]		= &g12a_ahb_arb0.hw,
+		[CLKID_AHB_DATA_BUS]		= &g12a_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]		= &g12a_ahb_ctrl_bus.hw,
+		[CLKID_HTX_HDCP22]		= &g12a_htx_hdcp22.hw,
+		[CLKID_HTX_PCLK]		= &g12a_htx_pclk.hw,
+		[CLKID_BT656]			= &g12a_bt656.hw,
+		[CLKID_USB1_DDR_BRIDGE]		= &g12a_usb1_to_ddr.hw,
+		[CLKID_MMC_PCLK]		= &g12a_mmc_pclk.hw,
+		[CLKID_UART2]			= &g12a_uart2.hw,
+		[CLKID_VPU_INTR]		= &g12a_vpu_intr.hw,
+		[CLKID_GIC]			= &g12a_gic.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]	= &g12a_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]	= &g12a_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]		= &g12a_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]	= &g12a_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]	= &g12a_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]		= &g12a_sd_emmc_c_clk0.hw,
+		[CLKID_MPLL0_DIV]		= &g12a_mpll0_div.hw,
+		[CLKID_MPLL1_DIV]		= &g12a_mpll1_div.hw,
+		[CLKID_MPLL2_DIV]		= &g12a_mpll2_div.hw,
+		[CLKID_MPLL3_DIV]		= &g12a_mpll3_div.hw,
+		[CLKID_HIFI_PLL]		= &g12a_hifi_pll.hw,
+		[CLKID_VCLK2_VENCI0]		= &g12a_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]		= &g12a_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]		= &g12a_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]		= &g12a_vclk2_vencp1.hw,
+		[CLKID_VCLK2_VENCT0]		= &g12a_vclk2_venct0.hw,
+		[CLKID_VCLK2_VENCT1]		= &g12a_vclk2_venct1.hw,
+		[CLKID_VCLK2_OTHER]		= &g12a_vclk2_other.hw,
+		[CLKID_VCLK2_ENCI]		= &g12a_vclk2_enci.hw,
+		[CLKID_VCLK2_ENCP]		= &g12a_vclk2_encp.hw,
+		[CLKID_DAC_CLK]			= &g12a_dac_clk.hw,
+		[CLKID_AOCLK]			= &g12a_aoclk_gate.hw,
+		[CLKID_IEC958]			= &g12a_iec958_gate.hw,
+		[CLKID_ENC480P]			= &g12a_enc480p.hw,
+		[CLKID_RNG1]			= &g12a_rng1.hw,
+		[CLKID_VCLK2_ENCT]		= &g12a_vclk2_enct.hw,
+		[CLKID_VCLK2_ENCL]		= &g12a_vclk2_encl.hw,
+		[CLKID_VCLK2_VENCLMMC]		= &g12a_vclk2_venclmmc.hw,
+		[CLKID_VCLK2_VENCL]		= &g12a_vclk2_vencl.hw,
+		[CLKID_VCLK2_OTHER1]		= &g12a_vclk2_other1.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const g12a_clk_regmaps[] = {
+	&g12a_clk81,
+	&g12a_dos,
+	&g12a_ddr,
+	&g12a_audio_locker,
+	&g12a_mipi_dsi_host,
+	&g12a_eth_phy,
+	&g12a_isa,
+	&g12a_pl301,
+	&g12a_periphs,
+	&g12a_spicc_0,
+	&g12a_i2c,
+	&g12a_sana,
+	&g12a_sd,
+	&g12a_rng0,
+	&g12a_uart0,
+	&g12a_spicc_1,
+	&g12a_hiu_reg,
+	&g12a_mipi_dsi_phy,
+	&g12a_assist_misc,
+	&g12a_emmc_a,
+	&g12a_emmc_b,
+	&g12a_emmc_c,
+	&g12a_audio_codec,
+	&g12a_audio,
+	&g12a_eth_core,
+	&g12a_demux,
+	&g12a_audio_ififo,
+	&g12a_adc,
+	&g12a_uart1,
+	&g12a_g2d,
+	&g12a_reset,
+	&g12a_pcie_comb,
+	&g12a_parser,
+	&g12a_usb_general,
+	&g12a_pcie_phy,
+	&g12a_ahb_arb0,
+	&g12a_ahb_data_bus,
+	&g12a_ahb_ctrl_bus,
+	&g12a_htx_hdcp22,
+	&g12a_htx_pclk,
+	&g12a_bt656,
+	&g12a_usb1_to_ddr,
+	&g12a_mmc_pclk,
+	&g12a_vpu_intr,
+	&g12a_gic,
+	&g12a_sd_emmc_b_clk0,
+	&g12a_sd_emmc_c_clk0,
+	&g12a_mpeg_clk_div,
+	&g12a_sd_emmc_b_clk0_div,
+	&g12a_sd_emmc_c_clk0_div,
+	&g12a_mpeg_clk_sel,
+	&g12a_sd_emmc_b_clk0_sel,
+	&g12a_sd_emmc_c_clk0_sel,
+	&g12a_mpll0,
+	&g12a_mpll1,
+	&g12a_mpll2,
+	&g12a_mpll3,
+	&g12a_mpll0_div,
+	&g12a_mpll1_div,
+	&g12a_mpll2_div,
+	&g12a_mpll3_div,
+	&g12a_fixed_pll,
+	&g12a_sys_pll,
+	&g12a_gp0_pll,
+	&g12a_hifi_pll,
+	&g12a_vclk2_venci0,
+	&g12a_vclk2_venci1,
+	&g12a_vclk2_vencp0,
+	&g12a_vclk2_vencp1,
+	&g12a_vclk2_venct0,
+	&g12a_vclk2_venct1,
+	&g12a_vclk2_other,
+	&g12a_vclk2_enci,
+	&g12a_vclk2_encp,
+	&g12a_dac_clk,
+	&g12a_aoclk_gate,
+	&g12a_iec958_gate,
+	&g12a_enc480p,
+	&g12a_rng1,
+	&g12a_vclk2_enct,
+	&g12a_vclk2_encl,
+	&g12a_vclk2_venclmmc,
+	&g12a_vclk2_vencl,
+	&g12a_vclk2_other1,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+	{ .compatible = "amlogic,g12a-clkc" },
+	{}
+};
+
+static const struct regmap_config clkc_regmap_config = {
+	.reg_bits       = 32,
+	.val_bits       = 32,
+	.reg_stride     = 4,
+};
+
+static int g12a_clkc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *map;
+	int ret, i;
+
+	/* Get the hhi system controller node if available */
+	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	if (IS_ERR(map)) {
+		dev_err(dev,
+			"failed to get HHI regmap\n");
+		return PTR_ERR(map);
+	}
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(g12a_clk_regmaps); i++)
+		g12a_clk_regmaps[i]->map = map;
+
+	for (i = 0; i < g12a_hw_onecell_data.num; i++) {
+		/* array might be sparse */
+		if (!g12a_hw_onecell_data.hws[i])
+			continue;
+
+		ret = devm_clk_hw_register(dev, g12a_hw_onecell_data.hws[i]);
+		if (ret) {
+			dev_err(dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &g12a_hw_onecell_data);
+}
+
+static struct platform_driver g12a_driver = {
+	.probe		= g12a_clkc_probe,
+	.driver		= {
+		.name	= "g12a-clkc",
+		.of_match_table = clkc_match_table,
+	},
+};
+
+builtin_platform_driver(g12a_driver);
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
new file mode 100644
index 0000000..a284b06
--- /dev/null
+++ b/drivers/clk/meson/g12a.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 Amlogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ */
+#ifndef __G12A_H
+#define __G12A_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_MIPI_CNTL0			0x000
+#define HHI_MIPI_CNTL1			0x004
+#define HHI_MIPI_CNTL2			0x008
+#define HHI_MIPI_STS			0x00C
+#define HHI_GP0_PLL_CNTL0		0x040
+#define HHI_GP0_PLL_CNTL1		0x044
+#define HHI_GP0_PLL_CNTL2		0x048
+#define HHI_GP0_PLL_CNTL3		0x04C
+#define HHI_GP0_PLL_CNTL4		0x050
+#define HHI_GP0_PLL_CNTL5		0x054
+#define HHI_GP0_PLL_CNTL6		0x058
+#define HHI_GP0_PLL_STS			0x05C
+#define HHI_PCIE_PLL_CNTL0		0x098
+#define HHI_PCIE_PLL_CNTL1		0x09C
+#define HHI_PCIE_PLL_CNTL2		0x0A0
+#define HHI_PCIE_PLL_CNTL3		0x0A4
+#define HHI_PCIE_PLL_CNTL4		0x0A8
+#define HHI_PCIE_PLL_CNTL5		0x0AC
+#define HHI_PCIE_PLL_STS		0x0B8
+#define HHI_HIFI_PLL_CNTL0		0x0D8
+#define HHI_HIFI_PLL_CNTL1		0x0DC
+#define HHI_HIFI_PLL_CNTL2		0x0E0
+#define HHI_HIFI_PLL_CNTL3		0x0E4
+#define HHI_HIFI_PLL_CNTL4		0x0E8
+#define HHI_HIFI_PLL_CNTL5		0x0EC
+#define HHI_HIFI_PLL_CNTL6		0x0F0
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_AUD_CLK_CNTL		0x178
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0	0x19c
+#define HHI_MALI_CLK_CNTL		0x1b0
+#define HHI_VPU_CLKC_CNTL		0x1b4
+#define HHI_VPU_CLK_CNTL		0x1bC
+#define HHI_HDMI_CLK_CNTL		0x1CC
+#define HHI_VDEC_CLK_CNTL		0x1E0
+#define HHI_VDEC2_CLK_CNTL		0x1E4
+#define HHI_VDEC3_CLK_CNTL		0x1E8
+#define HHI_VDEC4_CLK_CNTL		0x1EC
+#define HHI_HDCP22_CLK_CNTL		0x1F0
+#define HHI_VAPBCLK_CNTL		0x1F4
+#define HHI_VPU_CLKB_CNTL		0x20C
+#define HHI_GEN_CLK_CNTL		0x228
+#define HHI_VDIN_MEAS_CLK_CNTL	0x250
+#define HHI_MIPIDSI_PHY_CLK_CNTL	0x254
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL	0x264
+#define HHI_MPLL_CNTL0			0x278
+#define HHI_MPLL_CNTL1			0x27C
+#define HHI_MPLL_CNTL2			0x280
+#define HHI_MPLL_CNTL3			0x284
+#define HHI_MPLL_CNTL4			0x288
+#define HHI_MPLL_CNTL5			0x28c
+#define HHI_MPLL_CNTL6			0x290
+#define HHI_MPLL_CNTL7			0x294
+#define HHI_MPLL_CNTL8			0x298
+#define HHI_FIX_PLL_CNTL0		0x2A0
+#define HHI_FIX_PLL_CNTL1		0x2A4
+#define HHI_SYS_PLL_CNTL0		0x2f4
+#define HHI_SYS_PLL_CNTL1		0x2f8
+#define HHI_SYS_PLL_CNTL2		0x2fc
+#define HHI_SYS_PLL_CNTL3		0x300
+#define HHI_SYS_PLL_CNTL4		0x304
+#define HHI_SYS_PLL_CNTL5		0x308
+#define HHI_SYS_PLL_CNTL6		0x30c
+#define HHI_SPICC_CLK_CNTL		0x3dc
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL	62
+#define CLKID_SD_EMMC_B_CLK0_DIV	63
+#define CLKID_SD_EMMC_C_CLK0_SEL	64
+#define CLKID_SD_EMMC_C_CLK0_DIV	65
+#define CLKID_MPLL0_DIV				66
+#define CLKID_MPLL1_DIV				67
+#define CLKID_MPLL2_DIV				68
+#define CLKID_MPLL3_DIV				69
+#define CLKID_MPLL_PREDIV			70
+#define CLKID_FCLK_DIV2_DIV			72
+#define CLKID_FCLK_DIV3_DIV			73
+#define CLKID_FCLK_DIV4_DIV			74
+#define CLKID_FCLK_DIV5_DIV			75
+#define CLKID_FCLK_DIV7_DIV			76
+#define NR_CLKS						96
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/g12a-clkc.h>
+
+#endif /* __G12A_H */
-- 
1.9.1

[RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part
of the Amlogic Meson-G12A SoC.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 drivers/clk/meson/Kconfig  |  10 +
 drivers/clk/meson/Makefile |   1 +
 drivers/clk/meson/g12a.c   | 994 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.h   | 122 ++++++
 4 files changed, 1127 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..16edad8 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -54,3 +54,13 @@ config COMMON_CLK_AXG_AUDIO
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
 	  aka axg, Say Y if you want audio subsystem to work.
+
+config COMMON_CLK_G12A
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	select RESET_CONTROLLER
+	select COMMON_CLK_REGMAP_MESON
+	select MFD_SYSCON
+	help
+	  Support for the clock controller on Amlogic S905D2 devices, aka g12a.
+	  Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 72ec8c4..2b1a562 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
+obj-$(CONFIG_COMMON_CLK_G12A)	 += g12a.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
new file mode 100644
index 0000000..c0285ec
--- /dev/null
+++ b/drivers/clk/meson/g12a.c
@@ -0,0 +1,994 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-G12A Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clkc.h"
+#include "g12a.h"
+
+static DEFINE_SPINLOCK(meson_clk_lock);
+
+static struct clk_regmap g12a_fixed_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_FIX_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_sys_init_regs[] = {
+	{ .reg = HHI_SYS_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_SYS_PLL_CNTL4,	.def = 0x88770290 },
+	{ .reg = HHI_SYS_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_SYS_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_sys_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.l = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.init_regs = g12a_sys_init_regs,
+		.init_count = ARRAY_SIZE(g12a_sys_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static const struct pll_rate_table g12a_gp0_pll_rate_table[] = {
+	PLL_RATE(24000000,  128, 1, 7),
+	PLL_RATE(48000000,  128, 1, 6),
+	PLL_RATE(96000000,  128, 1, 5),
+	PLL_RATE(192000000,  128, 1, 4),
+	PLL_RATE(312000000,  208, 1, 4),
+	PLL_RATE(408000000,  136, 1, 3),
+	PLL_RATE(600000000,  200, 1, 3),
+	PLL_RATE(696000000,  232, 1, 3),
+	PLL_RATE(792000000,  132, 1, 2),
+	PLL_RATE(846000000,  141, 1, 2),
+	PLL_RATE(912000000,  152, 1, 2),
+	PLL_RATE(1008000000, 168, 1, 2),
+	PLL_RATE(1104000000, 184, 1, 2),
+	PLL_RATE(1200000000, 200, 1, 2),
+	PLL_RATE(1296000000, 216, 1, 2),
+	PLL_RATE(1398000000, 233, 1, 2),
+	PLL_RATE(1494000000, 249, 1, 2),
+	PLL_RATE(1512000000, 126, 1, 1),
+	PLL_RATE(1608000000, 134, 1, 1),
+	PLL_RATE(1704000000, 142, 1, 1),
+	PLL_RATE(1800000000, 150, 1, 1),
+	PLL_RATE(1896000000, 158, 1, 1),
+	PLL_RATE(1908000000, 159, 1, 1),
+	PLL_RATE(1920000000, 160, 1, 1),
+	PLL_RATE(2016000000, 168, 1, 1),
+	PLL_RATE(2100000000, 175, 1, 1),
+	PLL_RATE(2196000000, 183, 1, 1),
+	PLL_RATE(2292000000, 191, 1, 1),
+	PLL_RATE(2400000000, 200, 1, 1),
+	PLL_RATE(2496000000, 208, 1, 1),
+	PLL_RATE(2592000000, 216, 1, 1),
+	PLL_RATE(2700000000, 225, 1, 1),
+	PLL_RATE(2796000000, 233, 1, 1),
+	PLL_RATE(2892000000, 241, 1, 1),
+	PLL_RATE(3000000000, 125, 1, 0),
+	PLL_RATE(3096000000, 129, 1, 0),
+	PLL_RATE(3192000000, 133, 1, 0),
+	PLL_RATE(3288000000, 137, 1, 0),
+	PLL_RATE(3408000000, 142, 1, 0),
+	PLL_RATE(3504000000, 146, 1, 0),
+	PLL_RATE(3600000000, 150, 1, 0),
+	PLL_RATE(3696000000, 154, 1, 0),
+	PLL_RATE(3792000000, 158, 1, 0),
+	PLL_RATE(3888000000, 162, 1, 0),
+	PLL_RATE(4008000000, 167, 1, 0),
+	PLL_RATE(4104000000, 171, 1, 0),
+	PLL_RATE(4200000000, 175, 1, 0),
+	PLL_RATE(4296000000, 179, 1, 0),
+	PLL_RATE(4392000000, 183, 1, 0),
+	PLL_RATE(4488000000, 187, 1, 0),
+	PLL_RATE(4608000000, 192, 1, 0),
+	PLL_RATE(4704000000, 196, 1, 0),
+	PLL_RATE(4800000000, 200, 1, 0),
+	PLL_RATE(4896000000, 204, 1, 0),
+	PLL_RATE(4992000000, 208, 1, 0),
+	PLL_RATE(5088000000, 212, 1, 0),
+	PLL_RATE(5208000000, 217, 1, 0),
+	PLL_RATE(5304000000, 221, 1, 0),
+	PLL_RATE(5400000000, 225, 1, 0),
+	PLL_RATE(5496000000, 229, 1, 0),
+	PLL_RATE(5592000000, 233, 1, 0),
+	PLL_RATE(5688000000, 237, 1, 0),
+	PLL_RATE(5808000000, 242, 1, 0),
+	PLL_RATE(5904000000, 246, 1, 0),
+	PLL_RATE(6000000000, 250, 1, 0),
+	{ /* sentinel */ },
+};
+
+static const struct reg_sequence g12a_gp0_init_regs[] = {
+	{ .reg = HHI_GP0_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_GP0_PLL_CNTL4,	.def = 0x33771290 },
+	{ .reg = HHI_GP0_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_GP0_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_gp0_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.frac = {
+			.reg_off = HHI_GP0_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_gp0_init_regs,
+		.init_count = ARRAY_SIZE(g12a_gp0_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_hifi_init_regs[] = {
+	{ .reg = HHI_HIFI_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL3,	.def = 0x6a285c00 },
+	{ .reg = HHI_HIFI_PLL_CNTL4,	.def = 0x65771290 },
+	{ .reg = HHI_HIFI_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_HIFI_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_hifi_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_HIFI_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_hifi_init_regs,
+		.init_count = ARRAY_SIZE(g12a_hifi_init_regs),
+		.flags = CLK_MESON_PLL_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "hifi_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div3 = {
+	.mult = 1,
+	.div = 3,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div4 = {
+	.mult = 1,
+	.div = 4,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div5 = {
+	.mult = 1,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div7 = {
+	.mult = 1,
+	.div = 7,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL1,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll1_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL3,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll2_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll2 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL5,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll2_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll3_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll3 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL7,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll3_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+	"fclk_div3", "fclk_div5"
+};
+
+static struct clk_regmap g12a_mpeg_clk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 12,
+		.table = mux_table_clk81,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_names = clk81_parent_names,
+		.num_parents = ARRAY_SIZE(clk81_parent_names),
+	},
+};
+
+static struct clk_regmap g12a_mpeg_clk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_clk81 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "clk81",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_div" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+	},
+};
+
+static const char * const g12a_sd_emmc_clk0_parent_names[] = {
+	"xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+	/*
+	 * Following these parent clocks, we should also have had mpll2, mpll3
+	 * and gp0_pll but these clocks are too precious to be used here. All
+	 * the necessary rates for MMC and NAND operation can be acheived using
+	 * xtal or fclk_div clocks
+	 */
+};
+
+/* SDcard clock */
+static struct clk_regmap g12a_sd_emmc_b_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 25,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.shift = 16,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.bit_idx = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_b_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* EMMC/NAND clock */
+static struct clk_regmap g12a_sd_emmc_c_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 9,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_c_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(g12a_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(g12a_dos, HHI_GCLK_MPEG0, 1);
+static MESON_GATE(g12a_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(g12a_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(g12a_eth_phy, HHI_GCLK_MPEG0, 4);
+static MESON_GATE(g12a_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(g12a_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(g12a_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(g12a_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(g12a_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(g12a_sana, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(g12a_sd, HHI_GCLK_MPEG0, 11);
+static MESON_GATE(g12a_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(g12a_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(g12a_spicc_1, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(g12a_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(g12a_mipi_dsi_phy, HHI_GCLK_MPEG0, 20);
+static MESON_GATE(g12a_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(g12a_emmc_a, HHI_GCLK_MPEG0, 24);
+static MESON_GATE(g12a_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(g12a_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(g12a_audio_codec, HHI_GCLK_MPEG0, 28);
+
+static MESON_GATE(g12a_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(g12a_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(g12a_demux, HHI_GCLK_MPEG1, 4);
+static MESON_GATE(g12a_audio_ififo, HHI_GCLK_MPEG1, 11);
+static MESON_GATE(g12a_adc, HHI_GCLK_MPEG1, 13);
+static MESON_GATE(g12a_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(g12a_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(g12a_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(g12a_pcie_comb, HHI_GCLK_MPEG1, 24);
+static MESON_GATE(g12a_parser, HHI_GCLK_MPEG1, 25);
+static MESON_GATE(g12a_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(g12a_pcie_phy, HHI_GCLK_MPEG1, 27);
+static MESON_GATE(g12a_ahb_arb0, HHI_GCLK_MPEG1, 29);
+
+static MESON_GATE(g12a_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(g12a_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(g12a_htx_hdcp22, HHI_GCLK_MPEG2, 3);
+static MESON_GATE(g12a_htx_pclk, HHI_GCLK_MPEG2, 4);
+static MESON_GATE(g12a_bt656, HHI_GCLK_MPEG2, 6);
+static MESON_GATE(g12a_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(g12a_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(g12a_uart2, HHI_GCLK_MPEG2, 15);
+static MESON_GATE(g12a_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(g12a_gic, HHI_GCLK_MPEG2, 30);
+
+static MESON_GATE(g12a_vclk2_venci0, HHI_GCLK_OTHER, 1);
+static MESON_GATE(g12a_vclk2_venci1, HHI_GCLK_OTHER, 2);
+static MESON_GATE(g12a_vclk2_vencp0, HHI_GCLK_OTHER, 3);
+static MESON_GATE(g12a_vclk2_vencp1, HHI_GCLK_OTHER, 4);
+static MESON_GATE(g12a_vclk2_venct0, HHI_GCLK_OTHER, 5);
+static MESON_GATE(g12a_vclk2_venct1, HHI_GCLK_OTHER, 6);
+static MESON_GATE(g12a_vclk2_other, HHI_GCLK_OTHER, 7);
+static MESON_GATE(g12a_vclk2_enci, HHI_GCLK_OTHER, 8);
+static MESON_GATE(g12a_vclk2_encp, HHI_GCLK_OTHER, 9);
+static MESON_GATE(g12a_dac_clk, HHI_GCLK_OTHER, 10);
+static MESON_GATE(g12a_aoclk_gate, HHI_GCLK_OTHER, 14);
+static MESON_GATE(g12a_iec958_gate, HHI_GCLK_OTHER, 16);
+static MESON_GATE(g12a_enc480p, HHI_GCLK_OTHER, 20);
+static MESON_GATE(g12a_rng1, HHI_GCLK_OTHER, 21);
+static MESON_GATE(g12a_vclk2_enct, HHI_GCLK_OTHER, 22);
+static MESON_GATE(g12a_vclk2_encl, HHI_GCLK_OTHER, 23);
+static MESON_GATE(g12a_vclk2_venclmmc, HHI_GCLK_OTHER, 24);
+static MESON_GATE(g12a_vclk2_vencl, HHI_GCLK_OTHER, 25);
+static MESON_GATE(g12a_vclk2_other1, HHI_GCLK_OTHER, 26);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data g12a_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]			= &g12a_sys_pll.hw,
+		[CLKID_FIXED_PLL]		= &g12a_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]		= &g12a_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]		= &g12a_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]		= &g12a_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]		= &g12a_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]		= &g12a_fclk_div7.hw,
+		[CLKID_GP0_PLL]			= &g12a_gp0_pll.hw,
+		[CLKID_MPEG_SEL]		= &g12a_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]		= &g12a_mpeg_clk_div.hw,
+		[CLKID_CLK81]			= &g12a_clk81.hw,
+		[CLKID_MPLL0]			= &g12a_mpll0.hw,
+		[CLKID_MPLL1]			= &g12a_mpll1.hw,
+		[CLKID_MPLL2]			= &g12a_mpll2.hw,
+		[CLKID_MPLL3]			= &g12a_mpll3.hw,
+		[CLKID_DDR]			= &g12a_ddr.hw,
+		[CLKID_DOS]			= &g12a_dos.hw,
+		[CLKID_AUDIO_LOCKER]		= &g12a_audio_locker.hw,
+		[CLKID_MIPI_DSI_HOST]		= &g12a_mipi_dsi_host.hw,
+		[CLKID_ETH_PHY]			= &g12a_eth_phy.hw,
+		[CLKID_ISA]			= &g12a_isa.hw,
+		[CLKID_PL301]			= &g12a_pl301.hw,
+		[CLKID_PERIPHS]			= &g12a_periphs.hw,
+		[CLKID_SPICC0]			= &g12a_spicc_0.hw,
+		[CLKID_I2C]			= &g12a_i2c.hw,
+		[CLKID_SANA]			= &g12a_sana.hw,
+		[CLKID_SD]			= &g12a_sd.hw,
+		[CLKID_RNG0]			= &g12a_rng0.hw,
+		[CLKID_UART0]			= &g12a_uart0.hw,
+		[CLKID_SPICC1]			= &g12a_spicc_1.hw,
+		[CLKID_HIU_IFACE]		= &g12a_hiu_reg.hw,
+		[CLKID_MIPI_DSI_PHY]		= &g12a_mipi_dsi_phy.hw,
+		[CLKID_ASSIST_MISC]		= &g12a_assist_misc.hw,
+		[CLKID_SD_EMMC_A]		= &g12a_emmc_a.hw,
+		[CLKID_SD_EMMC_B]		= &g12a_emmc_b.hw,
+		[CLKID_SD_EMMC_C]		= &g12a_emmc_c.hw,
+		[CLKID_AUDIO_CODEC]		= &g12a_audio_codec.hw,
+		[CLKID_AUDIO]			= &g12a_audio.hw,
+		[CLKID_ETH]			= &g12a_eth_core.hw,
+		[CLKID_DEMUX]			= &g12a_demux.hw,
+		[CLKID_AUDIO_IFIFO]		= &g12a_audio_ififo.hw,
+		[CLKID_ADC]			= &g12a_adc.hw,
+		[CLKID_UART1]			= &g12a_uart1.hw,
+		[CLKID_G2D]			= &g12a_g2d.hw,
+		[CLKID_RESET]			= &g12a_reset.hw,
+		[CLKID_PCIE_COMB]		= &g12a_pcie_comb.hw,
+		[CLKID_PARSER]			= &g12a_parser.hw,
+		[CLKID_USB]			= &g12a_usb_general.hw,
+		[CLKID_PCIE_PHY]		= &g12a_pcie_phy.hw,
+		[CLKID_AHB_ARB0]		= &g12a_ahb_arb0.hw,
+		[CLKID_AHB_DATA_BUS]		= &g12a_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]		= &g12a_ahb_ctrl_bus.hw,
+		[CLKID_HTX_HDCP22]		= &g12a_htx_hdcp22.hw,
+		[CLKID_HTX_PCLK]		= &g12a_htx_pclk.hw,
+		[CLKID_BT656]			= &g12a_bt656.hw,
+		[CLKID_USB1_DDR_BRIDGE]		= &g12a_usb1_to_ddr.hw,
+		[CLKID_MMC_PCLK]		= &g12a_mmc_pclk.hw,
+		[CLKID_UART2]			= &g12a_uart2.hw,
+		[CLKID_VPU_INTR]		= &g12a_vpu_intr.hw,
+		[CLKID_GIC]			= &g12a_gic.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]	= &g12a_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]	= &g12a_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]		= &g12a_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]	= &g12a_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]	= &g12a_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]		= &g12a_sd_emmc_c_clk0.hw,
+		[CLKID_MPLL0_DIV]		= &g12a_mpll0_div.hw,
+		[CLKID_MPLL1_DIV]		= &g12a_mpll1_div.hw,
+		[CLKID_MPLL2_DIV]		= &g12a_mpll2_div.hw,
+		[CLKID_MPLL3_DIV]		= &g12a_mpll3_div.hw,
+		[CLKID_HIFI_PLL]		= &g12a_hifi_pll.hw,
+		[CLKID_VCLK2_VENCI0]		= &g12a_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]		= &g12a_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]		= &g12a_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]		= &g12a_vclk2_vencp1.hw,
+		[CLKID_VCLK2_VENCT0]		= &g12a_vclk2_venct0.hw,
+		[CLKID_VCLK2_VENCT1]		= &g12a_vclk2_venct1.hw,
+		[CLKID_VCLK2_OTHER]		= &g12a_vclk2_other.hw,
+		[CLKID_VCLK2_ENCI]		= &g12a_vclk2_enci.hw,
+		[CLKID_VCLK2_ENCP]		= &g12a_vclk2_encp.hw,
+		[CLKID_DAC_CLK]			= &g12a_dac_clk.hw,
+		[CLKID_AOCLK]			= &g12a_aoclk_gate.hw,
+		[CLKID_IEC958]			= &g12a_iec958_gate.hw,
+		[CLKID_ENC480P]			= &g12a_enc480p.hw,
+		[CLKID_RNG1]			= &g12a_rng1.hw,
+		[CLKID_VCLK2_ENCT]		= &g12a_vclk2_enct.hw,
+		[CLKID_VCLK2_ENCL]		= &g12a_vclk2_encl.hw,
+		[CLKID_VCLK2_VENCLMMC]		= &g12a_vclk2_venclmmc.hw,
+		[CLKID_VCLK2_VENCL]		= &g12a_vclk2_vencl.hw,
+		[CLKID_VCLK2_OTHER1]		= &g12a_vclk2_other1.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const g12a_clk_regmaps[] = {
+	&g12a_clk81,
+	&g12a_dos,
+	&g12a_ddr,
+	&g12a_audio_locker,
+	&g12a_mipi_dsi_host,
+	&g12a_eth_phy,
+	&g12a_isa,
+	&g12a_pl301,
+	&g12a_periphs,
+	&g12a_spicc_0,
+	&g12a_i2c,
+	&g12a_sana,
+	&g12a_sd,
+	&g12a_rng0,
+	&g12a_uart0,
+	&g12a_spicc_1,
+	&g12a_hiu_reg,
+	&g12a_mipi_dsi_phy,
+	&g12a_assist_misc,
+	&g12a_emmc_a,
+	&g12a_emmc_b,
+	&g12a_emmc_c,
+	&g12a_audio_codec,
+	&g12a_audio,
+	&g12a_eth_core,
+	&g12a_demux,
+	&g12a_audio_ififo,
+	&g12a_adc,
+	&g12a_uart1,
+	&g12a_g2d,
+	&g12a_reset,
+	&g12a_pcie_comb,
+	&g12a_parser,
+	&g12a_usb_general,
+	&g12a_pcie_phy,
+	&g12a_ahb_arb0,
+	&g12a_ahb_data_bus,
+	&g12a_ahb_ctrl_bus,
+	&g12a_htx_hdcp22,
+	&g12a_htx_pclk,
+	&g12a_bt656,
+	&g12a_usb1_to_ddr,
+	&g12a_mmc_pclk,
+	&g12a_vpu_intr,
+	&g12a_gic,
+	&g12a_sd_emmc_b_clk0,
+	&g12a_sd_emmc_c_clk0,
+	&g12a_mpeg_clk_div,
+	&g12a_sd_emmc_b_clk0_div,
+	&g12a_sd_emmc_c_clk0_div,
+	&g12a_mpeg_clk_sel,
+	&g12a_sd_emmc_b_clk0_sel,
+	&g12a_sd_emmc_c_clk0_sel,
+	&g12a_mpll0,
+	&g12a_mpll1,
+	&g12a_mpll2,
+	&g12a_mpll3,
+	&g12a_mpll0_div,
+	&g12a_mpll1_div,
+	&g12a_mpll2_div,
+	&g12a_mpll3_div,
+	&g12a_fixed_pll,
+	&g12a_sys_pll,
+	&g12a_gp0_pll,
+	&g12a_hifi_pll,
+	&g12a_vclk2_venci0,
+	&g12a_vclk2_venci1,
+	&g12a_vclk2_vencp0,
+	&g12a_vclk2_vencp1,
+	&g12a_vclk2_venct0,
+	&g12a_vclk2_venct1,
+	&g12a_vclk2_other,
+	&g12a_vclk2_enci,
+	&g12a_vclk2_encp,
+	&g12a_dac_clk,
+	&g12a_aoclk_gate,
+	&g12a_iec958_gate,
+	&g12a_enc480p,
+	&g12a_rng1,
+	&g12a_vclk2_enct,
+	&g12a_vclk2_encl,
+	&g12a_vclk2_venclmmc,
+	&g12a_vclk2_vencl,
+	&g12a_vclk2_other1,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+	{ .compatible = "amlogic,g12a-clkc" },
+	{}
+};
+
+static const struct regmap_config clkc_regmap_config = {
+	.reg_bits       = 32,
+	.val_bits       = 32,
+	.reg_stride     = 4,
+};
+
+static int g12a_clkc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *map;
+	int ret, i;
+
+	/* Get the hhi system controller node if available */
+	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	if (IS_ERR(map)) {
+		dev_err(dev,
+			"failed to get HHI regmap\n");
+		return PTR_ERR(map);
+	}
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(g12a_clk_regmaps); i++)
+		g12a_clk_regmaps[i]->map = map;
+
+	for (i = 0; i < g12a_hw_onecell_data.num; i++) {
+		/* array might be sparse */
+		if (!g12a_hw_onecell_data.hws[i])
+			continue;
+
+		ret = devm_clk_hw_register(dev, g12a_hw_onecell_data.hws[i]);
+		if (ret) {
+			dev_err(dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &g12a_hw_onecell_data);
+}
+
+static struct platform_driver g12a_driver = {
+	.probe		= g12a_clkc_probe,
+	.driver		= {
+		.name	= "g12a-clkc",
+		.of_match_table = clkc_match_table,
+	},
+};
+
+builtin_platform_driver(g12a_driver);
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
new file mode 100644
index 0000000..a284b06
--- /dev/null
+++ b/drivers/clk/meson/g12a.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 Amlogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ */
+#ifndef __G12A_H
+#define __G12A_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_MIPI_CNTL0			0x000
+#define HHI_MIPI_CNTL1			0x004
+#define HHI_MIPI_CNTL2			0x008
+#define HHI_MIPI_STS			0x00C
+#define HHI_GP0_PLL_CNTL0		0x040
+#define HHI_GP0_PLL_CNTL1		0x044
+#define HHI_GP0_PLL_CNTL2		0x048
+#define HHI_GP0_PLL_CNTL3		0x04C
+#define HHI_GP0_PLL_CNTL4		0x050
+#define HHI_GP0_PLL_CNTL5		0x054
+#define HHI_GP0_PLL_CNTL6		0x058
+#define HHI_GP0_PLL_STS			0x05C
+#define HHI_PCIE_PLL_CNTL0		0x098
+#define HHI_PCIE_PLL_CNTL1		0x09C
+#define HHI_PCIE_PLL_CNTL2		0x0A0
+#define HHI_PCIE_PLL_CNTL3		0x0A4
+#define HHI_PCIE_PLL_CNTL4		0x0A8
+#define HHI_PCIE_PLL_CNTL5		0x0AC
+#define HHI_PCIE_PLL_STS		0x0B8
+#define HHI_HIFI_PLL_CNTL0		0x0D8
+#define HHI_HIFI_PLL_CNTL1		0x0DC
+#define HHI_HIFI_PLL_CNTL2		0x0E0
+#define HHI_HIFI_PLL_CNTL3		0x0E4
+#define HHI_HIFI_PLL_CNTL4		0x0E8
+#define HHI_HIFI_PLL_CNTL5		0x0EC
+#define HHI_HIFI_PLL_CNTL6		0x0F0
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_AUD_CLK_CNTL		0x178
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0	0x19c
+#define HHI_MALI_CLK_CNTL		0x1b0
+#define HHI_VPU_CLKC_CNTL		0x1b4
+#define HHI_VPU_CLK_CNTL		0x1bC
+#define HHI_HDMI_CLK_CNTL		0x1CC
+#define HHI_VDEC_CLK_CNTL		0x1E0
+#define HHI_VDEC2_CLK_CNTL		0x1E4
+#define HHI_VDEC3_CLK_CNTL		0x1E8
+#define HHI_VDEC4_CLK_CNTL		0x1EC
+#define HHI_HDCP22_CLK_CNTL		0x1F0
+#define HHI_VAPBCLK_CNTL		0x1F4
+#define HHI_VPU_CLKB_CNTL		0x20C
+#define HHI_GEN_CLK_CNTL		0x228
+#define HHI_VDIN_MEAS_CLK_CNTL	0x250
+#define HHI_MIPIDSI_PHY_CLK_CNTL	0x254
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL	0x264
+#define HHI_MPLL_CNTL0			0x278
+#define HHI_MPLL_CNTL1			0x27C
+#define HHI_MPLL_CNTL2			0x280
+#define HHI_MPLL_CNTL3			0x284
+#define HHI_MPLL_CNTL4			0x288
+#define HHI_MPLL_CNTL5			0x28c
+#define HHI_MPLL_CNTL6			0x290
+#define HHI_MPLL_CNTL7			0x294
+#define HHI_MPLL_CNTL8			0x298
+#define HHI_FIX_PLL_CNTL0		0x2A0
+#define HHI_FIX_PLL_CNTL1		0x2A4
+#define HHI_SYS_PLL_CNTL0		0x2f4
+#define HHI_SYS_PLL_CNTL1		0x2f8
+#define HHI_SYS_PLL_CNTL2		0x2fc
+#define HHI_SYS_PLL_CNTL3		0x300
+#define HHI_SYS_PLL_CNTL4		0x304
+#define HHI_SYS_PLL_CNTL5		0x308
+#define HHI_SYS_PLL_CNTL6		0x30c
+#define HHI_SPICC_CLK_CNTL		0x3dc
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL	62
+#define CLKID_SD_EMMC_B_CLK0_DIV	63
+#define CLKID_SD_EMMC_C_CLK0_SEL	64
+#define CLKID_SD_EMMC_C_CLK0_DIV	65
+#define CLKID_MPLL0_DIV				66
+#define CLKID_MPLL1_DIV				67
+#define CLKID_MPLL2_DIV				68
+#define CLKID_MPLL3_DIV				69
+#define CLKID_MPLL_PREDIV			70
+#define CLKID_FCLK_DIV2_DIV			72
+#define CLKID_FCLK_DIV3_DIV			73
+#define CLKID_FCLK_DIV4_DIV			74
+#define CLKID_FCLK_DIV5_DIV			75
+#define CLKID_FCLK_DIV7_DIV			76
+#define NR_CLKS						96
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/g12a-clkc.h>
+
+#endif /* __G12A_H */
-- 
1.9.1

[RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part
of the Amlogic Meson-G12A SoC.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 drivers/clk/meson/Kconfig  |  10 +
 drivers/clk/meson/Makefile |   1 +
 drivers/clk/meson/g12a.c   | 994 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.h   | 122 ++++++
 4 files changed, 1127 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..16edad8 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -54,3 +54,13 @@ config COMMON_CLK_AXG_AUDIO
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
 	  aka axg, Say Y if you want audio subsystem to work.
+
+config COMMON_CLK_G12A
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	select RESET_CONTROLLER
+	select COMMON_CLK_REGMAP_MESON
+	select MFD_SYSCON
+	help
+	  Support for the clock controller on Amlogic S905D2 devices, aka g12a.
+	  Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 72ec8c4..2b1a562 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
+obj-$(CONFIG_COMMON_CLK_G12A)	 += g12a.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
new file mode 100644
index 0000000..c0285ec
--- /dev/null
+++ b/drivers/clk/meson/g12a.c
@@ -0,0 +1,994 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-G12A Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clkc.h"
+#include "g12a.h"
+
+static DEFINE_SPINLOCK(meson_clk_lock);
+
+static struct clk_regmap g12a_fixed_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_FIX_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_sys_init_regs[] = {
+	{ .reg = HHI_SYS_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_SYS_PLL_CNTL4,	.def = 0x88770290 },
+	{ .reg = HHI_SYS_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_SYS_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_sys_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.l = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.init_regs = g12a_sys_init_regs,
+		.init_count = ARRAY_SIZE(g12a_sys_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static const struct pll_rate_table g12a_gp0_pll_rate_table[] = {
+	PLL_RATE(24000000,  128, 1, 7),
+	PLL_RATE(48000000,  128, 1, 6),
+	PLL_RATE(96000000,  128, 1, 5),
+	PLL_RATE(192000000,  128, 1, 4),
+	PLL_RATE(312000000,  208, 1, 4),
+	PLL_RATE(408000000,  136, 1, 3),
+	PLL_RATE(600000000,  200, 1, 3),
+	PLL_RATE(696000000,  232, 1, 3),
+	PLL_RATE(792000000,  132, 1, 2),
+	PLL_RATE(846000000,  141, 1, 2),
+	PLL_RATE(912000000,  152, 1, 2),
+	PLL_RATE(1008000000, 168, 1, 2),
+	PLL_RATE(1104000000, 184, 1, 2),
+	PLL_RATE(1200000000, 200, 1, 2),
+	PLL_RATE(1296000000, 216, 1, 2),
+	PLL_RATE(1398000000, 233, 1, 2),
+	PLL_RATE(1494000000, 249, 1, 2),
+	PLL_RATE(1512000000, 126, 1, 1),
+	PLL_RATE(1608000000, 134, 1, 1),
+	PLL_RATE(1704000000, 142, 1, 1),
+	PLL_RATE(1800000000, 150, 1, 1),
+	PLL_RATE(1896000000, 158, 1, 1),
+	PLL_RATE(1908000000, 159, 1, 1),
+	PLL_RATE(1920000000, 160, 1, 1),
+	PLL_RATE(2016000000, 168, 1, 1),
+	PLL_RATE(2100000000, 175, 1, 1),
+	PLL_RATE(2196000000, 183, 1, 1),
+	PLL_RATE(2292000000, 191, 1, 1),
+	PLL_RATE(2400000000, 200, 1, 1),
+	PLL_RATE(2496000000, 208, 1, 1),
+	PLL_RATE(2592000000, 216, 1, 1),
+	PLL_RATE(2700000000, 225, 1, 1),
+	PLL_RATE(2796000000, 233, 1, 1),
+	PLL_RATE(2892000000, 241, 1, 1),
+	PLL_RATE(3000000000, 125, 1, 0),
+	PLL_RATE(3096000000, 129, 1, 0),
+	PLL_RATE(3192000000, 133, 1, 0),
+	PLL_RATE(3288000000, 137, 1, 0),
+	PLL_RATE(3408000000, 142, 1, 0),
+	PLL_RATE(3504000000, 146, 1, 0),
+	PLL_RATE(3600000000, 150, 1, 0),
+	PLL_RATE(3696000000, 154, 1, 0),
+	PLL_RATE(3792000000, 158, 1, 0),
+	PLL_RATE(3888000000, 162, 1, 0),
+	PLL_RATE(4008000000, 167, 1, 0),
+	PLL_RATE(4104000000, 171, 1, 0),
+	PLL_RATE(4200000000, 175, 1, 0),
+	PLL_RATE(4296000000, 179, 1, 0),
+	PLL_RATE(4392000000, 183, 1, 0),
+	PLL_RATE(4488000000, 187, 1, 0),
+	PLL_RATE(4608000000, 192, 1, 0),
+	PLL_RATE(4704000000, 196, 1, 0),
+	PLL_RATE(4800000000, 200, 1, 0),
+	PLL_RATE(4896000000, 204, 1, 0),
+	PLL_RATE(4992000000, 208, 1, 0),
+	PLL_RATE(5088000000, 212, 1, 0),
+	PLL_RATE(5208000000, 217, 1, 0),
+	PLL_RATE(5304000000, 221, 1, 0),
+	PLL_RATE(5400000000, 225, 1, 0),
+	PLL_RATE(5496000000, 229, 1, 0),
+	PLL_RATE(5592000000, 233, 1, 0),
+	PLL_RATE(5688000000, 237, 1, 0),
+	PLL_RATE(5808000000, 242, 1, 0),
+	PLL_RATE(5904000000, 246, 1, 0),
+	PLL_RATE(6000000000, 250, 1, 0),
+	{ /* sentinel */ },
+};
+
+static const struct reg_sequence g12a_gp0_init_regs[] = {
+	{ .reg = HHI_GP0_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_GP0_PLL_CNTL4,	.def = 0x33771290 },
+	{ .reg = HHI_GP0_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_GP0_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_gp0_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 3,
+		},
+		.frac = {
+			.reg_off = HHI_GP0_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_gp0_init_regs,
+		.init_count = ARRAY_SIZE(g12a_gp0_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence g12a_hifi_init_regs[] = {
+	{ .reg = HHI_HIFI_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL3,	.def = 0x6a285c00 },
+	{ .reg = HHI_HIFI_PLL_CNTL4,	.def = 0x65771290 },
+	{ .reg = HHI_HIFI_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_HIFI_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_hifi_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_HIFI_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_rate_table,
+		.init_regs = g12a_hifi_init_regs,
+		.init_count = ARRAY_SIZE(g12a_hifi_init_regs),
+		.flags = CLK_MESON_PLL_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "hifi_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div3 = {
+	.mult = 1,
+	.div = 3,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div4 = {
+	.mult = 1,
+	.div = 4,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div5 = {
+	.mult = 1,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div7 = {
+	.mult = 1,
+	.div = 7,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL1,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll1_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL3,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll2_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll2 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL5,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll2_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll3_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll3 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL7,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll3_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+	"fclk_div3", "fclk_div5"
+};
+
+static struct clk_regmap g12a_mpeg_clk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 12,
+		.table = mux_table_clk81,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_names = clk81_parent_names,
+		.num_parents = ARRAY_SIZE(clk81_parent_names),
+	},
+};
+
+static struct clk_regmap g12a_mpeg_clk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_clk81 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "clk81",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_div" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+	},
+};
+
+static const char * const g12a_sd_emmc_clk0_parent_names[] = {
+	"xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+	/*
+	 * Following these parent clocks, we should also have had mpll2, mpll3
+	 * and gp0_pll but these clocks are too precious to be used here. All
+	 * the necessary rates for MMC and NAND operation can be acheived using
+	 * xtal or fclk_div clocks
+	 */
+};
+
+/* SDcard clock */
+static struct clk_regmap g12a_sd_emmc_b_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 25,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.shift = 16,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.bit_idx = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_b_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* EMMC/NAND clock */
+static struct clk_regmap g12a_sd_emmc_c_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 9,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_c_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(g12a_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(g12a_dos, HHI_GCLK_MPEG0, 1);
+static MESON_GATE(g12a_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(g12a_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(g12a_eth_phy, HHI_GCLK_MPEG0, 4);
+static MESON_GATE(g12a_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(g12a_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(g12a_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(g12a_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(g12a_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(g12a_sana, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(g12a_sd, HHI_GCLK_MPEG0, 11);
+static MESON_GATE(g12a_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(g12a_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(g12a_spicc_1, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(g12a_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(g12a_mipi_dsi_phy, HHI_GCLK_MPEG0, 20);
+static MESON_GATE(g12a_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(g12a_emmc_a, HHI_GCLK_MPEG0, 24);
+static MESON_GATE(g12a_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(g12a_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(g12a_audio_codec, HHI_GCLK_MPEG0, 28);
+
+static MESON_GATE(g12a_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(g12a_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(g12a_demux, HHI_GCLK_MPEG1, 4);
+static MESON_GATE(g12a_audio_ififo, HHI_GCLK_MPEG1, 11);
+static MESON_GATE(g12a_adc, HHI_GCLK_MPEG1, 13);
+static MESON_GATE(g12a_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(g12a_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(g12a_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(g12a_pcie_comb, HHI_GCLK_MPEG1, 24);
+static MESON_GATE(g12a_parser, HHI_GCLK_MPEG1, 25);
+static MESON_GATE(g12a_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(g12a_pcie_phy, HHI_GCLK_MPEG1, 27);
+static MESON_GATE(g12a_ahb_arb0, HHI_GCLK_MPEG1, 29);
+
+static MESON_GATE(g12a_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(g12a_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(g12a_htx_hdcp22, HHI_GCLK_MPEG2, 3);
+static MESON_GATE(g12a_htx_pclk, HHI_GCLK_MPEG2, 4);
+static MESON_GATE(g12a_bt656, HHI_GCLK_MPEG2, 6);
+static MESON_GATE(g12a_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(g12a_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(g12a_uart2, HHI_GCLK_MPEG2, 15);
+static MESON_GATE(g12a_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(g12a_gic, HHI_GCLK_MPEG2, 30);
+
+static MESON_GATE(g12a_vclk2_venci0, HHI_GCLK_OTHER, 1);
+static MESON_GATE(g12a_vclk2_venci1, HHI_GCLK_OTHER, 2);
+static MESON_GATE(g12a_vclk2_vencp0, HHI_GCLK_OTHER, 3);
+static MESON_GATE(g12a_vclk2_vencp1, HHI_GCLK_OTHER, 4);
+static MESON_GATE(g12a_vclk2_venct0, HHI_GCLK_OTHER, 5);
+static MESON_GATE(g12a_vclk2_venct1, HHI_GCLK_OTHER, 6);
+static MESON_GATE(g12a_vclk2_other, HHI_GCLK_OTHER, 7);
+static MESON_GATE(g12a_vclk2_enci, HHI_GCLK_OTHER, 8);
+static MESON_GATE(g12a_vclk2_encp, HHI_GCLK_OTHER, 9);
+static MESON_GATE(g12a_dac_clk, HHI_GCLK_OTHER, 10);
+static MESON_GATE(g12a_aoclk_gate, HHI_GCLK_OTHER, 14);
+static MESON_GATE(g12a_iec958_gate, HHI_GCLK_OTHER, 16);
+static MESON_GATE(g12a_enc480p, HHI_GCLK_OTHER, 20);
+static MESON_GATE(g12a_rng1, HHI_GCLK_OTHER, 21);
+static MESON_GATE(g12a_vclk2_enct, HHI_GCLK_OTHER, 22);
+static MESON_GATE(g12a_vclk2_encl, HHI_GCLK_OTHER, 23);
+static MESON_GATE(g12a_vclk2_venclmmc, HHI_GCLK_OTHER, 24);
+static MESON_GATE(g12a_vclk2_vencl, HHI_GCLK_OTHER, 25);
+static MESON_GATE(g12a_vclk2_other1, HHI_GCLK_OTHER, 26);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data g12a_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]			= &g12a_sys_pll.hw,
+		[CLKID_FIXED_PLL]		= &g12a_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]		= &g12a_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]		= &g12a_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]		= &g12a_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]		= &g12a_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]		= &g12a_fclk_div7.hw,
+		[CLKID_GP0_PLL]			= &g12a_gp0_pll.hw,
+		[CLKID_MPEG_SEL]		= &g12a_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]		= &g12a_mpeg_clk_div.hw,
+		[CLKID_CLK81]			= &g12a_clk81.hw,
+		[CLKID_MPLL0]			= &g12a_mpll0.hw,
+		[CLKID_MPLL1]			= &g12a_mpll1.hw,
+		[CLKID_MPLL2]			= &g12a_mpll2.hw,
+		[CLKID_MPLL3]			= &g12a_mpll3.hw,
+		[CLKID_DDR]			= &g12a_ddr.hw,
+		[CLKID_DOS]			= &g12a_dos.hw,
+		[CLKID_AUDIO_LOCKER]		= &g12a_audio_locker.hw,
+		[CLKID_MIPI_DSI_HOST]		= &g12a_mipi_dsi_host.hw,
+		[CLKID_ETH_PHY]			= &g12a_eth_phy.hw,
+		[CLKID_ISA]			= &g12a_isa.hw,
+		[CLKID_PL301]			= &g12a_pl301.hw,
+		[CLKID_PERIPHS]			= &g12a_periphs.hw,
+		[CLKID_SPICC0]			= &g12a_spicc_0.hw,
+		[CLKID_I2C]			= &g12a_i2c.hw,
+		[CLKID_SANA]			= &g12a_sana.hw,
+		[CLKID_SD]			= &g12a_sd.hw,
+		[CLKID_RNG0]			= &g12a_rng0.hw,
+		[CLKID_UART0]			= &g12a_uart0.hw,
+		[CLKID_SPICC1]			= &g12a_spicc_1.hw,
+		[CLKID_HIU_IFACE]		= &g12a_hiu_reg.hw,
+		[CLKID_MIPI_DSI_PHY]		= &g12a_mipi_dsi_phy.hw,
+		[CLKID_ASSIST_MISC]		= &g12a_assist_misc.hw,
+		[CLKID_SD_EMMC_A]		= &g12a_emmc_a.hw,
+		[CLKID_SD_EMMC_B]		= &g12a_emmc_b.hw,
+		[CLKID_SD_EMMC_C]		= &g12a_emmc_c.hw,
+		[CLKID_AUDIO_CODEC]		= &g12a_audio_codec.hw,
+		[CLKID_AUDIO]			= &g12a_audio.hw,
+		[CLKID_ETH]			= &g12a_eth_core.hw,
+		[CLKID_DEMUX]			= &g12a_demux.hw,
+		[CLKID_AUDIO_IFIFO]		= &g12a_audio_ififo.hw,
+		[CLKID_ADC]			= &g12a_adc.hw,
+		[CLKID_UART1]			= &g12a_uart1.hw,
+		[CLKID_G2D]			= &g12a_g2d.hw,
+		[CLKID_RESET]			= &g12a_reset.hw,
+		[CLKID_PCIE_COMB]		= &g12a_pcie_comb.hw,
+		[CLKID_PARSER]			= &g12a_parser.hw,
+		[CLKID_USB]			= &g12a_usb_general.hw,
+		[CLKID_PCIE_PHY]		= &g12a_pcie_phy.hw,
+		[CLKID_AHB_ARB0]		= &g12a_ahb_arb0.hw,
+		[CLKID_AHB_DATA_BUS]		= &g12a_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]		= &g12a_ahb_ctrl_bus.hw,
+		[CLKID_HTX_HDCP22]		= &g12a_htx_hdcp22.hw,
+		[CLKID_HTX_PCLK]		= &g12a_htx_pclk.hw,
+		[CLKID_BT656]			= &g12a_bt656.hw,
+		[CLKID_USB1_DDR_BRIDGE]		= &g12a_usb1_to_ddr.hw,
+		[CLKID_MMC_PCLK]		= &g12a_mmc_pclk.hw,
+		[CLKID_UART2]			= &g12a_uart2.hw,
+		[CLKID_VPU_INTR]		= &g12a_vpu_intr.hw,
+		[CLKID_GIC]			= &g12a_gic.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]	= &g12a_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]	= &g12a_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]		= &g12a_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]	= &g12a_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]	= &g12a_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]		= &g12a_sd_emmc_c_clk0.hw,
+		[CLKID_MPLL0_DIV]		= &g12a_mpll0_div.hw,
+		[CLKID_MPLL1_DIV]		= &g12a_mpll1_div.hw,
+		[CLKID_MPLL2_DIV]		= &g12a_mpll2_div.hw,
+		[CLKID_MPLL3_DIV]		= &g12a_mpll3_div.hw,
+		[CLKID_HIFI_PLL]		= &g12a_hifi_pll.hw,
+		[CLKID_VCLK2_VENCI0]		= &g12a_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]		= &g12a_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]		= &g12a_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]		= &g12a_vclk2_vencp1.hw,
+		[CLKID_VCLK2_VENCT0]		= &g12a_vclk2_venct0.hw,
+		[CLKID_VCLK2_VENCT1]		= &g12a_vclk2_venct1.hw,
+		[CLKID_VCLK2_OTHER]		= &g12a_vclk2_other.hw,
+		[CLKID_VCLK2_ENCI]		= &g12a_vclk2_enci.hw,
+		[CLKID_VCLK2_ENCP]		= &g12a_vclk2_encp.hw,
+		[CLKID_DAC_CLK]			= &g12a_dac_clk.hw,
+		[CLKID_AOCLK]			= &g12a_aoclk_gate.hw,
+		[CLKID_IEC958]			= &g12a_iec958_gate.hw,
+		[CLKID_ENC480P]			= &g12a_enc480p.hw,
+		[CLKID_RNG1]			= &g12a_rng1.hw,
+		[CLKID_VCLK2_ENCT]		= &g12a_vclk2_enct.hw,
+		[CLKID_VCLK2_ENCL]		= &g12a_vclk2_encl.hw,
+		[CLKID_VCLK2_VENCLMMC]		= &g12a_vclk2_venclmmc.hw,
+		[CLKID_VCLK2_VENCL]		= &g12a_vclk2_vencl.hw,
+		[CLKID_VCLK2_OTHER1]		= &g12a_vclk2_other1.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const g12a_clk_regmaps[] = {
+	&g12a_clk81,
+	&g12a_dos,
+	&g12a_ddr,
+	&g12a_audio_locker,
+	&g12a_mipi_dsi_host,
+	&g12a_eth_phy,
+	&g12a_isa,
+	&g12a_pl301,
+	&g12a_periphs,
+	&g12a_spicc_0,
+	&g12a_i2c,
+	&g12a_sana,
+	&g12a_sd,
+	&g12a_rng0,
+	&g12a_uart0,
+	&g12a_spicc_1,
+	&g12a_hiu_reg,
+	&g12a_mipi_dsi_phy,
+	&g12a_assist_misc,
+	&g12a_emmc_a,
+	&g12a_emmc_b,
+	&g12a_emmc_c,
+	&g12a_audio_codec,
+	&g12a_audio,
+	&g12a_eth_core,
+	&g12a_demux,
+	&g12a_audio_ififo,
+	&g12a_adc,
+	&g12a_uart1,
+	&g12a_g2d,
+	&g12a_reset,
+	&g12a_pcie_comb,
+	&g12a_parser,
+	&g12a_usb_general,
+	&g12a_pcie_phy,
+	&g12a_ahb_arb0,
+	&g12a_ahb_data_bus,
+	&g12a_ahb_ctrl_bus,
+	&g12a_htx_hdcp22,
+	&g12a_htx_pclk,
+	&g12a_bt656,
+	&g12a_usb1_to_ddr,
+	&g12a_mmc_pclk,
+	&g12a_vpu_intr,
+	&g12a_gic,
+	&g12a_sd_emmc_b_clk0,
+	&g12a_sd_emmc_c_clk0,
+	&g12a_mpeg_clk_div,
+	&g12a_sd_emmc_b_clk0_div,
+	&g12a_sd_emmc_c_clk0_div,
+	&g12a_mpeg_clk_sel,
+	&g12a_sd_emmc_b_clk0_sel,
+	&g12a_sd_emmc_c_clk0_sel,
+	&g12a_mpll0,
+	&g12a_mpll1,
+	&g12a_mpll2,
+	&g12a_mpll3,
+	&g12a_mpll0_div,
+	&g12a_mpll1_div,
+	&g12a_mpll2_div,
+	&g12a_mpll3_div,
+	&g12a_fixed_pll,
+	&g12a_sys_pll,
+	&g12a_gp0_pll,
+	&g12a_hifi_pll,
+	&g12a_vclk2_venci0,
+	&g12a_vclk2_venci1,
+	&g12a_vclk2_vencp0,
+	&g12a_vclk2_vencp1,
+	&g12a_vclk2_venct0,
+	&g12a_vclk2_venct1,
+	&g12a_vclk2_other,
+	&g12a_vclk2_enci,
+	&g12a_vclk2_encp,
+	&g12a_dac_clk,
+	&g12a_aoclk_gate,
+	&g12a_iec958_gate,
+	&g12a_enc480p,
+	&g12a_rng1,
+	&g12a_vclk2_enct,
+	&g12a_vclk2_encl,
+	&g12a_vclk2_venclmmc,
+	&g12a_vclk2_vencl,
+	&g12a_vclk2_other1,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+	{ .compatible = "amlogic,g12a-clkc" },
+	{}
+};
+
+static const struct regmap_config clkc_regmap_config = {
+	.reg_bits       = 32,
+	.val_bits       = 32,
+	.reg_stride     = 4,
+};
+
+static int g12a_clkc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *map;
+	int ret, i;
+
+	/* Get the hhi system controller node if available */
+	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	if (IS_ERR(map)) {
+		dev_err(dev,
+			"failed to get HHI regmap\n");
+		return PTR_ERR(map);
+	}
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(g12a_clk_regmaps); i++)
+		g12a_clk_regmaps[i]->map = map;
+
+	for (i = 0; i < g12a_hw_onecell_data.num; i++) {
+		/* array might be sparse */
+		if (!g12a_hw_onecell_data.hws[i])
+			continue;
+
+		ret = devm_clk_hw_register(dev, g12a_hw_onecell_data.hws[i]);
+		if (ret) {
+			dev_err(dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &g12a_hw_onecell_data);
+}
+
+static struct platform_driver g12a_driver = {
+	.probe		= g12a_clkc_probe,
+	.driver		= {
+		.name	= "g12a-clkc",
+		.of_match_table = clkc_match_table,
+	},
+};
+
+builtin_platform_driver(g12a_driver);
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
new file mode 100644
index 0000000..a284b06
--- /dev/null
+++ b/drivers/clk/meson/g12a.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 Amlogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ */
+#ifndef __G12A_H
+#define __G12A_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_MIPI_CNTL0			0x000
+#define HHI_MIPI_CNTL1			0x004
+#define HHI_MIPI_CNTL2			0x008
+#define HHI_MIPI_STS			0x00C
+#define HHI_GP0_PLL_CNTL0		0x040
+#define HHI_GP0_PLL_CNTL1		0x044
+#define HHI_GP0_PLL_CNTL2		0x048
+#define HHI_GP0_PLL_CNTL3		0x04C
+#define HHI_GP0_PLL_CNTL4		0x050
+#define HHI_GP0_PLL_CNTL5		0x054
+#define HHI_GP0_PLL_CNTL6		0x058
+#define HHI_GP0_PLL_STS			0x05C
+#define HHI_PCIE_PLL_CNTL0		0x098
+#define HHI_PCIE_PLL_CNTL1		0x09C
+#define HHI_PCIE_PLL_CNTL2		0x0A0
+#define HHI_PCIE_PLL_CNTL3		0x0A4
+#define HHI_PCIE_PLL_CNTL4		0x0A8
+#define HHI_PCIE_PLL_CNTL5		0x0AC
+#define HHI_PCIE_PLL_STS		0x0B8
+#define HHI_HIFI_PLL_CNTL0		0x0D8
+#define HHI_HIFI_PLL_CNTL1		0x0DC
+#define HHI_HIFI_PLL_CNTL2		0x0E0
+#define HHI_HIFI_PLL_CNTL3		0x0E4
+#define HHI_HIFI_PLL_CNTL4		0x0E8
+#define HHI_HIFI_PLL_CNTL5		0x0EC
+#define HHI_HIFI_PLL_CNTL6		0x0F0
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_AUD_CLK_CNTL		0x178
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0	0x19c
+#define HHI_MALI_CLK_CNTL		0x1b0
+#define HHI_VPU_CLKC_CNTL		0x1b4
+#define HHI_VPU_CLK_CNTL		0x1bC
+#define HHI_HDMI_CLK_CNTL		0x1CC
+#define HHI_VDEC_CLK_CNTL		0x1E0
+#define HHI_VDEC2_CLK_CNTL		0x1E4
+#define HHI_VDEC3_CLK_CNTL		0x1E8
+#define HHI_VDEC4_CLK_CNTL		0x1EC
+#define HHI_HDCP22_CLK_CNTL		0x1F0
+#define HHI_VAPBCLK_CNTL		0x1F4
+#define HHI_VPU_CLKB_CNTL		0x20C
+#define HHI_GEN_CLK_CNTL		0x228
+#define HHI_VDIN_MEAS_CLK_CNTL	0x250
+#define HHI_MIPIDSI_PHY_CLK_CNTL	0x254
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL	0x264
+#define HHI_MPLL_CNTL0			0x278
+#define HHI_MPLL_CNTL1			0x27C
+#define HHI_MPLL_CNTL2			0x280
+#define HHI_MPLL_CNTL3			0x284
+#define HHI_MPLL_CNTL4			0x288
+#define HHI_MPLL_CNTL5			0x28c
+#define HHI_MPLL_CNTL6			0x290
+#define HHI_MPLL_CNTL7			0x294
+#define HHI_MPLL_CNTL8			0x298
+#define HHI_FIX_PLL_CNTL0		0x2A0
+#define HHI_FIX_PLL_CNTL1		0x2A4
+#define HHI_SYS_PLL_CNTL0		0x2f4
+#define HHI_SYS_PLL_CNTL1		0x2f8
+#define HHI_SYS_PLL_CNTL2		0x2fc
+#define HHI_SYS_PLL_CNTL3		0x300
+#define HHI_SYS_PLL_CNTL4		0x304
+#define HHI_SYS_PLL_CNTL5		0x308
+#define HHI_SYS_PLL_CNTL6		0x30c
+#define HHI_SPICC_CLK_CNTL		0x3dc
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL	62
+#define CLKID_SD_EMMC_B_CLK0_DIV	63
+#define CLKID_SD_EMMC_C_CLK0_SEL	64
+#define CLKID_SD_EMMC_C_CLK0_DIV	65
+#define CLKID_MPLL0_DIV				66
+#define CLKID_MPLL1_DIV				67
+#define CLKID_MPLL2_DIV				68
+#define CLKID_MPLL3_DIV				69
+#define CLKID_MPLL_PREDIV			70
+#define CLKID_FCLK_DIV2_DIV			72
+#define CLKID_FCLK_DIV3_DIV			73
+#define CLKID_FCLK_DIV4_DIV			74
+#define CLKID_FCLK_DIV5_DIV			75
+#define CLKID_FCLK_DIV7_DIV			76
+#define NR_CLKS						96
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/g12a-clkc.h>
+
+#endif /* __G12A_H */
-- 
1.9.1

[RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jerome Brunet]

On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
> Add a Clock driver for the Everything-Else part
> of the Amlogic Meson-G12A SoC.
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>

Point raised about fdiv gates remains un-answered.
Please address all the point raised before reposting your patches.

[RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jerome Brunet]

On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
> Add a Clock driver for the Everything-Else part
> of the Amlogic Meson-G12A SoC.
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>

Point raised about fdiv gates remains un-answered.
Please address all the point raised before reposting your patches.

Re: [RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jerome Brunet]

On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
> Add a Clock driver for the Everything-Else part
> of the Amlogic Meson-G12A SoC.
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>

Point raised about fdiv gates remains un-answered.
Please address all the point raised before reposting your patches.

[RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

On 2018/7/16 19:00, Jerome Brunet wrote:
> On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
>> Add a Clock driver for the Everything-Else part
>> of the Amlogic Meson-G12A SoC.
>>
>> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> 
> Point raised about fdiv gates remains un-answered.
> Please address all the point raised before reposting your patches.
> 
> 
> 
> .
> 

So sorry, I have missed the question of fixed div gates.

You are right, g12a has gates in front of these fdivX clock, And they 
are controlled by bit 20 to 25 in HHI_FIX_PLL_CNTL1 register. The 
details are in the attachment which I have marked.

clock gate     control bit

fclk_div2      24
fclk_div3      20
fclk_div4      21
fclk_div5      22
fclk_div7      23
fclk_div2p5    25

Maybe it is not clear in your datasheet.

I will update the code for this.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mpll diagram .png
Type: image/png
Size: 201707 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20180717/6ccb09dc/attachment.png>

Re: [RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

[-- Attachment #1: Type: text/plain, Size: 834 bytes --]



On 2018/7/16 19:00, Jerome Brunet wrote:
> On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
>> Add a Clock driver for the Everything-Else part
>> of the Amlogic Meson-G12A SoC.
>>
>> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> 
> Point raised about fdiv gates remains un-answered.
> Please address all the point raised before reposting your patches.
> 
> 
> 
> .
> 

So sorry, I have missed the question of fixed div gates.

You are right, g12a has gates in front of these fdivX clock, And they 
are controlled by bit 20 to 25 in HHI_FIX_PLL_CNTL1 register. The 
details are in the attachment which I have marked.

clock gate     control bit

fclk_div2      24
fclk_div3      20
fclk_div4      21
fclk_div5      22
fclk_div7      23
fclk_div2p5    25

Maybe it is not clear in your datasheet.

I will update the code for this.


[-- Attachment #2: Mpll diagram .png --]
[-- Type: image/png, Size: 201707 bytes --]

Re: [RESEND PATCH v2 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

[-- Attachment #1: Type: text/plain, Size: 834 bytes --]



On 2018/7/16 19:00, Jerome Brunet wrote:
> On Mon, 2018-07-16 at 16:11 +0800, Jian Hu wrote:
>> Add a Clock driver for the Everything-Else part
>> of the Amlogic Meson-G12A SoC.
>>
>> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> 
> Point raised about fdiv gates remains un-answered.
> Please address all the point raised before reposting your patches.
> 
> 
> 
> .
> 

So sorry, I have missed the question of fixed div gates.

You are right, g12a has gates in front of these fdivX clock, And they 
are controlled by bit 20 to 25 in HHI_FIX_PLL_CNTL1 register. The 
details are in the attachment which I have marked.

clock gate     control bit

fclk_div2      24
fclk_div3      20
fclk_div4      21
fclk_div5      22
fclk_div7      23
fclk_div2p5    25

Maybe it is not clear in your datasheet.

I will update the code for this.


[-- Attachment #2: Mpll diagram .png --]
[-- Type: image/png, Size: 201707 bytes --]