From: Anson.Huang@nxp.com (Anson Huang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 3/3] ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
Date: Sun, 30 Sep 2018 11:32:28 +0800 [thread overview]
Message-ID: <1538278348-7716-4-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1538278348-7716-1-git-send-email-Anson.Huang@nxp.com>
i.MX6ULZ is new SoC of i.MX6 family, compared to i.MX6ULL,
it removes below modules:
- UART5/UART6/UART7/UART8;
- PWM5/PWM6/PWM7/PWM8;
- eCSPI3/eCSPI4;
- CAN1/CAN2;
- FEC1/FEC2;
- I2C3/I2C4;
- EPIT2;
- LCDIF;
- GPT2;
- ADC1;
- TSC;
This patch adds support for i.MX6ULZ and i.MX6ULZ 14x14 EVK
board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
Add "fsl,imx6ull" to DT compatible.
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/imx6ulz-14x14-evk.dts | 20 +++++++++++++++++
arch/arm/boot/dts/imx6ulz.dtsi | 38 +++++++++++++++++++++++++++++++++
3 files changed, 60 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx6ulz-14x14-evk.dts
create mode 100644 arch/arm/boot/dts/imx6ulz.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b3ec70d..d7268ae 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -560,7 +560,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
- imx6ull-colibri-wifi-eval-v3.dtb
+ imx6ull-colibri-wifi-eval-v3.dtb \
+ imx6ulz-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
new file mode 100644
index 0000000..6f1af24
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+ model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+ compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+ /delete-node/ panel;
+};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
new file mode 100644
index 0000000..ae6d7e5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+ aliases {
+ /delete-property/ ethernet0;
+ /delete-property/ ethernet1;
+ /delete-property/ i2c2;
+ /delete-property/ i2c3;
+ /delete-property/ serial4;
+ /delete-property/ serial5;
+ /delete-property/ serial6;
+ /delete-property/ serial7;
+ /delete-property/ spi2;
+ /delete-property/ spi3;
+ };
+};
+
+/delete-node/ &adc1;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Anson Huang <Anson.Huang@nxp.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
fabio.estevam@nxp.com, linux@armlinux.org.uk, ping.bai@nxp.com,
Aisheng.dong@nxp.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Linux-imx@nxp.com
Subject: [PATCH V3 3/3] ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
Date: Sun, 30 Sep 2018 11:32:28 +0800 [thread overview]
Message-ID: <1538278348-7716-4-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1538278348-7716-1-git-send-email-Anson.Huang@nxp.com>
i.MX6ULZ is new SoC of i.MX6 family, compared to i.MX6ULL,
it removes below modules:
- UART5/UART6/UART7/UART8;
- PWM5/PWM6/PWM7/PWM8;
- eCSPI3/eCSPI4;
- CAN1/CAN2;
- FEC1/FEC2;
- I2C3/I2C4;
- EPIT2;
- LCDIF;
- GPT2;
- ADC1;
- TSC;
This patch adds support for i.MX6ULZ and i.MX6ULZ 14x14 EVK
board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
Add "fsl,imx6ull" to DT compatible.
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/imx6ulz-14x14-evk.dts | 20 +++++++++++++++++
arch/arm/boot/dts/imx6ulz.dtsi | 38 +++++++++++++++++++++++++++++++++
3 files changed, 60 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx6ulz-14x14-evk.dts
create mode 100644 arch/arm/boot/dts/imx6ulz.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b3ec70d..d7268ae 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -560,7 +560,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
- imx6ull-colibri-wifi-eval-v3.dtb
+ imx6ull-colibri-wifi-eval-v3.dtb \
+ imx6ulz-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
new file mode 100644
index 0000000..6f1af24
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+ model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+ compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+ /delete-node/ panel;
+};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
new file mode 100644
index 0000000..ae6d7e5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+ aliases {
+ /delete-property/ ethernet0;
+ /delete-property/ ethernet1;
+ /delete-property/ i2c2;
+ /delete-property/ i2c3;
+ /delete-property/ serial4;
+ /delete-property/ serial5;
+ /delete-property/ serial6;
+ /delete-property/ serial7;
+ /delete-property/ spi2;
+ /delete-property/ spi3;
+ };
+};
+
+/delete-node/ &adc1;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
--
2.7.4
next prev parent reply other threads:[~2018-09-30 3:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-30 3:32 [PATCH V3 0/3] Add i.MX6ULZ SoC support Anson Huang
2018-09-30 3:32 ` Anson Huang
2018-09-30 3:32 ` [PATCH V3 1/3] ARM: imx: add i.mx6ulz msl support Anson Huang
2018-09-30 3:32 ` Anson Huang
2018-09-30 3:32 ` [PATCH V3 2/3] dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board Anson Huang
2018-09-30 3:32 ` Anson Huang
2018-09-30 3:32 ` Anson Huang [this message]
2018-09-30 3:32 ` [PATCH V3 3/3] ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support Anson Huang
2018-09-30 7:33 ` [PATCH V3 0/3] Add i.MX6ULZ SoC support Shawn Guo
2018-09-30 7:33 ` Shawn Guo
2020-01-22 8:39 ` Stefan Roese
2020-01-22 11:52 ` Stefan Roese
2020-01-22 12:50 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1538278348-7716-4-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.