All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Dodge <bdodge09@gmail.com>
To: lee.jones@linaro.org, daniel.thompson@linaro.org,
	jingoohan1@gmail.com, jacek.anaszewski@gmail.com, pavel@ucw.cz,
	robh+dt@kernel.org, mark.rutland@arm.com,
	dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: Brian Dodge <bdodge09@gmail.com>
Subject: [PATCH 1/3] dt-bindings: backlight: fix vendor prefix for ArcticSand arcxcnn driver bindings
Date: Wed,  7 Nov 2018 07:10:38 -0500	[thread overview]
Message-ID: <1541592640-18478-2-git-send-email-bdodge09@gmail.com> (raw)
In-Reply-To: <1541592640-18478-1-git-send-email-bdodge09@gmail.com>

The vendor-prefixes.txt file properly refers to ArcticSand
as arctic but the driver bindings improperly abbreviated the
prefix to arc. This was a mistake in the original patch

Signed-off-by: Brian Dodge <bdodge09@gmail.com>
---
 .../bindings/leds/backlight/arcxcnn_bl.txt           | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
index 230abde..dcaa239 100644
--- a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
+++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
@@ -1,8 +1,8 @@
-Binding for ArcticSand arc2c0608 LED driver
+Binding for ArcticSand arc family LED drivers

 Required properties:
-- compatible:		should be "arc,arc2c0608"
-- reg:			slave address
+- compatible:	"arctic,arc1c0608", "arctic,arc2c0608", "arctic,arc3c0845"
+- reg:		slave address

 Optional properties:
 - default-brightness:	brightness value on boot, value from: 0-4095
@@ -11,19 +11,19 @@ Optional properties:
 - led-sources:		List of enabled channels from 0 to 5.
 			See Documentation/devicetree/bindings/leds/common.txt

-- arc,led-config-0:	setting for register ILED_CONFIG_0
-- arc,led-config-1:	setting for register ILED_CONFIG_1
-- arc,dim-freq:		PWM mode frequence setting (bits [3:0] used)
-- arc,comp-config:	setting for register CONFIG_COMP
-- arc,filter-config:	setting for register FILTER_CONFIG
-- arc,trim-config:	setting for register IMAXTUNE
+- arctic,led-config-0:	setting for register ILED_CONFIG_0
+- arctic,led-config-1:	setting for register ILED_CONFIG_1
+- arctic,dim-freq:		PWM mode frequence setting (bits [3:0] used)
+- arctic,comp-config:	setting for register CONFIG_COMP
+- arctic,filter-config:	setting for register FILTER_CONFIG
+- arctic,trim-config:	setting for register IMAXTUNE

 Note: Optional properties not specified will default to values in IC EPROM

 Example:

 arc2c0608@30 {
-	compatible = "arc,arc2c0608";
+	compatible = "arctic,arc2c0608";
 	reg = <0x30>;
 	default-brightness = <500>;
 	label = "lcd-backlight";
--
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-11-07 12:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-07 12:10 [PATCH 0/3] backlight/arcxcnn fix vendor prefix in driver and bindings and add support for arc1, arc3 Brian Dodge
2018-11-07 12:10 ` Brian Dodge [this message]
2018-11-12 18:42   ` [PATCH 1/3] dt-bindings: backlight: fix vendor prefix for ArcticSand arcxcnn driver bindings Rob Herring
2018-11-07 12:10 ` [PATCH 2/3] backlight/arcxcnn fix vendor prefix Brian Dodge
2018-11-11 11:30   ` Pavel Machek
2018-11-27  0:44     ` Brian Dodge
2019-06-21 13:39       ` Daniel Thompson
2019-06-21 13:46       ` Daniel Thompson
2019-06-21 13:48         ` Daniel Thompson
2019-06-21 22:13         ` Pavel Machek
2019-06-24 10:24           ` Daniel Thompson
2019-06-24 11:29             ` Brian Dodge
2019-06-24 13:59               ` Daniel Thompson
2018-11-07 12:10 ` [PATCH 3/3] backlight/arcxcnn add support for arc1 an arc3 chip families Brian Dodge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1541592640-18478-2-git-send-email-bdodge09@gmail.com \
    --to=bdodge09@gmail.com \
    --cc=daniel.thompson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=jingoohan1@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.