[PATCH 1/2] drm/msm/dpu: add dpu encoder uninit

[PATCH 1/2] drm/msm/dpu: add dpu encoder uninit

[Jeykumar Sankaran]

Add encoder interface to release dpu encoder
on mode_init failures in kms.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  6 ++++++
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index dd7ab85..b253165 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -422,6 +422,15 @@ void dpu_encoder_get_hw_resources(struct drm_encoder *drm_enc,
 	}
 }
 
+void dpu_encoder_uninit(struct drm_encoder *drm_enc)
+{
+	struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
+
+	drm_encoder_cleanup(drm_enc);
+
+	kfree(dpu_enc);
+}
+
 static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
@@ -453,10 +462,9 @@ static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
 	dpu_enc->num_phys_encs = 0;
 	mutex_unlock(&dpu_enc->enc_lock);
 
-	drm_encoder_cleanup(drm_enc);
 	mutex_destroy(&dpu_enc->enc_lock);
 
-	kfree(dpu_enc);
+	dpu_encoder_uninit(drm_enc);
 }
 
 void dpu_encoder_helper_split_config(
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
index 9dbf38f..60b88bd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
@@ -142,6 +142,12 @@ struct drm_encoder *dpu_encoder_init(
 		int drm_enc_mode);
 
 /**
+ * dpu_encoder_uninit - uninitialize virtual encoder object
+ * @drm_enc:  Pointer to drm encoder
+ */
+void dpu_encoder_uninit(struct drm_encoder *drm_enc);
+
+/**
  * dpu_encoder_setup - setup dpu_encoder for the display probed
  * @dev:		Pointer to drm device structure
  * @enc:		Pointer to the drm_encoder
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 2/2] drm/msm/dpu: add display port support in DPU

[Jeykumar Sankaran]

Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

[1] https://lwn.net/Articles/768265/

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  3 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 49 +++++++++++++++++++++++++----
 2 files changed, 46 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index b253165..e9c7edc6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2048,6 +2048,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
+	case DRM_MODE_ENCODER_TMDS:
+		intf_type = INTF_DP;
+		break;
 	default:
 		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
 		return -EINVAL;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 985c855..b823a37 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -473,6 +473,31 @@ static void _dpu_kms_initialize_dsi(struct drm_device *dev,
 	}
 }
 
+static void _dpu_kms_initialize_displayport(struct drm_device *dev,
+					    struct msm_drm_private *priv,
+					    struct dpu_kms *dpu_kms)
+{
+	struct drm_encoder *encoder = NULL;
+	int rc;
+
+	if (!priv->dp)
+		return;
+
+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR_OR_NULL(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return;
+	}
+
+	priv->encoders[priv->num_encoders++] = encoder;
+
+	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+	if (rc) {
+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+		dpu_encoder_uninit(encoder);
+	}
+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -487,6 +512,8 @@ static void _dpu_kms_setup_displays(struct drm_device *dev,
 {
 	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
 
+	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+
 	/**
 	 * Extend this function to initialize other
 	 * types of displays
@@ -723,13 +750,23 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
 	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
 			MSM_DISPLAY_CAP_VID_MODE;
 
-	/* TODO: No support for DSI swap */
-	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-		if (priv->dsi[i]) {
-			info.h_tile_instance[info.num_of_h_tiles] = i;
-			info.num_of_h_tiles++;
+	switch (info.intf_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/* TODO: No support for DSI swap */
+		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+			if (priv->dsi[i]) {
+				info.h_tile_instance[info.num_of_h_tiles] = i;
+				info.num_of_h_tiles++;
+			}
 		}
-	}
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+		info.num_of_h_tiles = 1;
+		break;
+	default:
+		DPU_ERROR("Invalid connector type\n");
+		return;
+	};
 
 	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
 	if (rc)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/2] drm/msm/dpu: add display port support in DPU

[Jordan Crouse]

On Fri, Nov 16, 2018 at 11:22:22AM -0800, Jeykumar Sankaran wrote:
> Add display port support in DPU by creating hooks
> for DP encoder enumeration and encoder mode
> initialization.
> 
> This change is based on the SDM845 Display port
> driver changes[1].
> 
> [1] https://lwn.net/Articles/768265/
> 
> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  3 ++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 49 +++++++++++++++++++++++++----
>  2 files changed, 46 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index b253165..e9c7edc6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -2048,6 +2048,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
>  	case DRM_MODE_ENCODER_DSI:
>  		intf_type = INTF_DSI;
>  		break;
> +	case DRM_MODE_ENCODER_TMDS:
> +		intf_type = INTF_DP;
> +		break;
>  	default:
>  		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
>  		return -EINVAL;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 985c855..b823a37 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -473,6 +473,31 @@ static void _dpu_kms_initialize_dsi(struct drm_device *dev,
>  	}
>  }
>  
> +static void _dpu_kms_initialize_displayport(struct drm_device *dev,
> +					    struct msm_drm_private *priv,
> +					    struct dpu_kms *dpu_kms)
> +{
> +	struct drm_encoder *encoder = NULL;
> +	int rc;
> +
> +	if (!priv->dp)
> +		return;
> +
> +	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
> +	if (IS_ERR_OR_NULL(encoder)) {

dpu_encoder_init() only returns valid pointer or ERR_PTR() so a Only IS_ERR() is
needed.

> +		DPU_ERROR("encoder init failed for dsi display\n");
> +		return;
> +	}
> +
> +	priv->encoders[priv->num_encoders++] = encoder;
> +
> +	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
> +	if (rc) {
> +		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
> +		dpu_encoder_uninit(encoder);
> +	}
> +}
> +
>  /**
>   * _dpu_kms_setup_displays - create encoders, bridges and connectors
>   *                           for underlying displays
> @@ -487,6 +512,8 @@ static void _dpu_kms_setup_displays(struct drm_device *dev,
>  {
>  	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
>  
> +	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
> +
>  	/**
>  	 * Extend this function to initialize other
>  	 * types of displays
> @@ -723,13 +750,23 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
>  	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
>  			MSM_DISPLAY_CAP_VID_MODE;
>  
> -	/* TODO: No support for DSI swap */
> -	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> -		if (priv->dsi[i]) {
> -			info.h_tile_instance[info.num_of_h_tiles] = i;
> -			info.num_of_h_tiles++;
> +	switch (info.intf_type) {
> +	case DRM_MODE_ENCODER_DSI:
> +		/* TODO: No support for DSI swap */
> +		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> +			if (priv->dsi[i]) {
> +				info.h_tile_instance[info.num_of_h_tiles] = i;
> +				info.num_of_h_tiles++;
> +			}
>  		}
> -	}
> +		break;
> +	case DRM_MODE_ENCODER_TMDS:
> +		info.num_of_h_tiles = 1;
> +		break;
> +	default:
> +		DPU_ERROR("Invalid connector type\n");
> +		return;
> +	};

This is still going to be one of two options, a simple if/else can suffice here
and you don't need a log message and a default path.
>  
>  	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
>  	if (rc)

Jordan
-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/2] drm/msm/dpu: add dpu encoder uninit

[Sean Paul]

On Fri, Nov 16, 2018 at 11:22:21AM -0800, Jeykumar Sankaran wrote:
> Add encoder interface to release dpu encoder
> on mode_init failures in kms.
> 
> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++++--
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  6 ++++++
>  2 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index dd7ab85..b253165 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -422,6 +422,15 @@ void dpu_encoder_get_hw_resources(struct drm_encoder *drm_enc,
>  	}
>  }
>  
> +void dpu_encoder_uninit(struct drm_encoder *drm_enc)
> +{
> +	struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> +
> +	drm_encoder_cleanup(drm_enc);
> +
> +	kfree(dpu_enc);
> +}
> +
>  static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
>  {
>  	struct dpu_encoder_virt *dpu_enc = NULL;
> @@ -453,10 +462,9 @@ static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
>  	dpu_enc->num_phys_encs = 0;
>  	mutex_unlock(&dpu_enc->enc_lock);
>  
> -	drm_encoder_cleanup(drm_enc);
>  	mutex_destroy(&dpu_enc->enc_lock);
>  
> -	kfree(dpu_enc);
> +	dpu_encoder_uninit(drm_enc);
>  }
>  
>  void dpu_encoder_helper_split_config(
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> index 9dbf38f..60b88bd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> @@ -142,6 +142,12 @@ struct drm_encoder *dpu_encoder_init(
>  		int drm_enc_mode);
>  
>  /**
> + * dpu_encoder_uninit - uninitialize virtual encoder object
> + * @drm_enc:  Pointer to drm encoder
> + */
> +void dpu_encoder_uninit(struct drm_encoder *drm_enc);

Just make it static?

> +
> +/**
>   * dpu_encoder_setup - setup dpu_encoder for the display probed
>   * @dev:		Pointer to drm device structure
>   * @enc:		Pointer to the drm_encoder
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH 1/2] drm/msm/dpu: add dpu encoder uninit

[Sean Paul]

On Fri, Nov 16, 2018 at 04:35:26PM -0500, Sean Paul wrote:
> On Fri, Nov 16, 2018 at 11:22:21AM -0800, Jeykumar Sankaran wrote:
> > Add encoder interface to release dpu encoder
> > on mode_init failures in kms.
> > 
> > Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
> > ---
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++++--
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  6 ++++++
> >  2 files changed, 16 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > index dd7ab85..b253165 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > @@ -422,6 +422,15 @@ void dpu_encoder_get_hw_resources(struct drm_encoder *drm_enc,
> >  	}
> >  }
> >  
> > +void dpu_encoder_uninit(struct drm_encoder *drm_enc)
> > +{
> > +	struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> > +
> > +	drm_encoder_cleanup(drm_enc);
> > +
> > +	kfree(dpu_enc);
> > +}
> > +
> >  static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
> >  {
> >  	struct dpu_encoder_virt *dpu_enc = NULL;
> > @@ -453,10 +462,9 @@ static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
> >  	dpu_enc->num_phys_encs = 0;
> >  	mutex_unlock(&dpu_enc->enc_lock);
> >  
> > -	drm_encoder_cleanup(drm_enc);
> >  	mutex_destroy(&dpu_enc->enc_lock);
> >  
> > -	kfree(dpu_enc);
> > +	dpu_encoder_uninit(drm_enc);
> >  }
> >  
> >  void dpu_encoder_helper_split_config(
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > index 9dbf38f..60b88bd 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > @@ -142,6 +142,12 @@ struct drm_encoder *dpu_encoder_init(
> >  		int drm_enc_mode);
> >  
> >  /**
> > + * dpu_encoder_uninit - uninitialize virtual encoder object
> > + * @drm_enc:  Pointer to drm encoder
> > + */
> > +void dpu_encoder_uninit(struct drm_encoder *drm_enc);
> 
> Just make it static?

I just saw YueHaibing's patch to remove the kfree entirely since dpu_enc is
devm_* managed. IMO, that'd be a better solution than this.

Sean


> 
> > +
> > +/**
> >   * dpu_encoder_setup - setup dpu_encoder for the display probed
> >   * @dev:		Pointer to drm device structure
> >   * @enc:		Pointer to the drm_encoder
> > -- 
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> > a Linux Foundation Collaborative Project
> > 
> 
> -- 
> Sean Paul, Software Engineer, Google / Chromium OS

-- 
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH 1/2] drm/msm/dpu: add dpu encoder uninit

[Jeykumar Sankaran]

On 2018-11-16 13:37, Sean Paul wrote:
> On Fri, Nov 16, 2018 at 04:35:26PM -0500, Sean Paul wrote:
>> On Fri, Nov 16, 2018 at 11:22:21AM -0800, Jeykumar Sankaran wrote:
>> > Add encoder interface to release dpu encoder
>> > on mode_init failures in kms.
>> >
>> > Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
>> > ---
>> >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++++--
>> >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  6 ++++++
>> >  2 files changed, 16 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> > index dd7ab85..b253165 100644
>> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> > @@ -422,6 +422,15 @@ void dpu_encoder_get_hw_resources(struct
> drm_encoder *drm_enc,
>> >  	}
>> >  }
>> >
>> > +void dpu_encoder_uninit(struct drm_encoder *drm_enc)
>> > +{
>> > +	struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
>> > +
>> > +	drm_encoder_cleanup(drm_enc);
>> > +
>> > +	kfree(dpu_enc);
>> > +}
>> > +
>> >  static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
>> >  {
>> >  	struct dpu_encoder_virt *dpu_enc = NULL;
>> > @@ -453,10 +462,9 @@ static void dpu_encoder_destroy(struct
> drm_encoder *drm_enc)
>> >  	dpu_enc->num_phys_encs = 0;
>> >  	mutex_unlock(&dpu_enc->enc_lock);
>> >
>> > -	drm_encoder_cleanup(drm_enc);
>> >  	mutex_destroy(&dpu_enc->enc_lock);
>> >
>> > -	kfree(dpu_enc);
>> > +	dpu_encoder_uninit(drm_enc);
>> >  }
>> >
>> >  void dpu_encoder_helper_split_config(
>> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> > index 9dbf38f..60b88bd 100644
>> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> > @@ -142,6 +142,12 @@ struct drm_encoder *dpu_encoder_init(
>> >  		int drm_enc_mode);
>> >
>> >  /**
>> > + * dpu_encoder_uninit - uninitialize virtual encoder object
>> > + * @drm_enc:  Pointer to drm encoder
>> > + */
>> > +void dpu_encoder_uninit(struct drm_encoder *drm_enc);
>> 
>> Just make it static?
> 
> I just saw YueHaibing's patch to remove the kfree entirely since 
> dpu_enc
> is
> devm_* managed. IMO, that'd be a better solution than this.
> 
> Sean
> 
I still need the unint here to call drm_encoder_cleanup
if the display mode_init fails.

I will rebase the patch on top of https://lkml.org/lkml/2018/11/17/87

Thanks,
Jeykumar S.
> 
>> 
>> > +
>> > +/**
>> >   * dpu_encoder_setup - setup dpu_encoder for the display probed
>> >   * @dev:		Pointer to drm device structure
>> >   * @enc:		Pointer to the drm_encoder
>> > --
>> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum,
>> > a Linux Foundation Collaborative Project
>> >
>> 
>> --
>> Sean Paul, Software Engineer, Google / Chromium OS

-- 
Jeykumar S
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH 1/2] drm/msm/dpu: add dpu encoder uninit

[Jeykumar Sankaran]

On 2018-11-16 13:35, Sean Paul wrote:
> On Fri, Nov 16, 2018 at 11:22:21AM -0800, Jeykumar Sankaran wrote:
>> Add encoder interface to release dpu encoder
>> on mode_init failures in kms.
>> 
>> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++++--
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  6 ++++++
>>  2 files changed, 16 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> index dd7ab85..b253165 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> @@ -422,6 +422,15 @@ void dpu_encoder_get_hw_resources(struct
> drm_encoder *drm_enc,
>>  	}
>>  }
>> 
>> +void dpu_encoder_uninit(struct drm_encoder *drm_enc)
>> +{
>> +	struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
>> +
>> +	drm_encoder_cleanup(drm_enc);
>> +
>> +	kfree(dpu_enc);
>> +}
>> +
>>  static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
>>  {
>>  	struct dpu_encoder_virt *dpu_enc = NULL;
>> @@ -453,10 +462,9 @@ static void dpu_encoder_destroy(struct 
>> drm_encoder
> *drm_enc)
>>  	dpu_enc->num_phys_encs = 0;
>>  	mutex_unlock(&dpu_enc->enc_lock);
>> 
>> -	drm_encoder_cleanup(drm_enc);
>>  	mutex_destroy(&dpu_enc->enc_lock);
>> 
>> -	kfree(dpu_enc);
>> +	dpu_encoder_uninit(drm_enc);
>>  }
>> 
>>  void dpu_encoder_helper_split_config(
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> index 9dbf38f..60b88bd 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> @@ -142,6 +142,12 @@ struct drm_encoder *dpu_encoder_init(
>>  		int drm_enc_mode);
>> 
>>  /**
>> + * dpu_encoder_uninit - uninitialize virtual encoder object
>> + * @drm_enc:  Pointer to drm encoder
>> + */
>> +void dpu_encoder_uninit(struct drm_encoder *drm_enc);
> 
> Just make it static?
encoder_uninit will be called by dpu_kms in patch 2/2 in case
of mode_init failures.

Thanks and Regards,
Jeykumar S.
> 
>> +
>> +/**
>>   * dpu_encoder_setup - setup dpu_encoder for the display probed
>>   * @dev:		Pointer to drm device structure
>>   * @enc:		Pointer to the drm_encoder
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum,
>> a Linux Foundation Collaborative Project
>> 

-- 
Jeykumar S
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno