From: Eugen.Hristev@microchip.com (Eugen.Hristev at microchip.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] drm/panel: simple: add support for PDA 91-00156-A0 panel
Date: Wed, 21 Nov 2018 08:48:02 +0000 [thread overview]
Message-ID: <1542789804-4584-4-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1542789804-4584-1-git-send-email-eugen.hristev@microchip.com>
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel.
This panel with backlight is found in PDA 5" LCD screen (TM5000 series or
AC320005-5).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5fbee83..3fc9d0b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1984,6 +1984,30 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
+static const struct drm_display_mode pda_91_00156_a0_mode = {
+ .clock = 33300,
+ .hdisplay = 800,
+ .hsync_start = 800 + 1,
+ .hsync_end = 800 + 1 + 64,
+ .htotal = 800 + 1 + 64 + 64,
+ .vdisplay = 480,
+ .vsync_start = 480 + 1,
+ .vsync_end = 480 + 1 + 23,
+ .vtotal = 480 + 1 + 23 + 22,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc pda_91_00156_a0 = {
+ .modes = &pda_91_00156_a0_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+
static const struct drm_display_mode qd43003c0_40_mode = {
.clock = 9000,
.hdisplay = 480,
@@ -2659,6 +2683,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
}, {
+ .compatible = "pda,91-00156-a0",
+ .data = &pda_91_00156_a0,
+ }, {
.compatible = "qiaodian,qd43003c0-40",
.data = &qd43003c0_40,
}, {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: <Eugen.Hristev@microchip.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, thierry.reding@gmail.com,
airlied@linux.ie, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Nicolas.Ferre@microchip.com
Cc: Cristian.Birsan@microchip.com, Eugen.Hristev@microchip.com
Subject: [PATCH 3/3] drm/panel: simple: add support for PDA 91-00156-A0 panel
Date: Wed, 21 Nov 2018 08:48:02 +0000 [thread overview]
Message-ID: <1542789804-4584-4-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1542789804-4584-1-git-send-email-eugen.hristev@microchip.com>
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel.
This panel with backlight is found in PDA 5" LCD screen (TM5000 series or
AC320005-5).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5fbee83..3fc9d0b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1984,6 +1984,30 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
+static const struct drm_display_mode pda_91_00156_a0_mode = {
+ .clock = 33300,
+ .hdisplay = 800,
+ .hsync_start = 800 + 1,
+ .hsync_end = 800 + 1 + 64,
+ .htotal = 800 + 1 + 64 + 64,
+ .vdisplay = 480,
+ .vsync_start = 480 + 1,
+ .vsync_end = 480 + 1 + 23,
+ .vtotal = 480 + 1 + 23 + 22,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc pda_91_00156_a0 = {
+ .modes = &pda_91_00156_a0_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+
static const struct drm_display_mode qd43003c0_40_mode = {
.clock = 9000,
.hdisplay = 480,
@@ -2659,6 +2683,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
}, {
+ .compatible = "pda,91-00156-a0",
+ .data = &pda_91_00156_a0,
+ }, {
.compatible = "qiaodian,qd43003c0-40",
.data = &qd43003c0_40,
}, {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: <Eugen.Hristev@microchip.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<devicetree@vger.kernel.org>, <thierry.reding@gmail.com>,
<airlied@linux.ie>, <dri-devel@lists.freedesktop.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<Nicolas.Ferre@microchip.com>
Cc: <Cristian.Birsan@microchip.com>, <Eugen.Hristev@microchip.com>
Subject: [PATCH 3/3] drm/panel: simple: add support for PDA 91-00156-A0 panel
Date: Wed, 21 Nov 2018 08:48:02 +0000 [thread overview]
Message-ID: <1542789804-4584-4-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1542789804-4584-1-git-send-email-eugen.hristev@microchip.com>
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel.
This panel with backlight is found in PDA 5" LCD screen (TM5000 series or
AC320005-5).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5fbee83..3fc9d0b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1984,6 +1984,30 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
+static const struct drm_display_mode pda_91_00156_a0_mode = {
+ .clock = 33300,
+ .hdisplay = 800,
+ .hsync_start = 800 + 1,
+ .hsync_end = 800 + 1 + 64,
+ .htotal = 800 + 1 + 64 + 64,
+ .vdisplay = 480,
+ .vsync_start = 480 + 1,
+ .vsync_end = 480 + 1 + 23,
+ .vtotal = 480 + 1 + 23 + 22,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc pda_91_00156_a0 = {
+ .modes = &pda_91_00156_a0_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+
static const struct drm_display_mode qd43003c0_40_mode = {
.clock = 9000,
.hdisplay = 480,
@@ -2659,6 +2683,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
}, {
+ .compatible = "pda,91-00156-a0",
+ .data = &pda_91_00156_a0,
+ }, {
.compatible = "qiaodian,qd43003c0-40",
.data = &qd43003c0_40,
}, {
--
2.7.4
next prev parent reply other threads:[~2018-11-21 8:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-21 8:47 [PATCH 0/3] drm: Add panel support for PDA 91-00156-A0 Eugen.Hristev at microchip.com
2018-11-21 8:47 ` Eugen.Hristev
2018-11-21 8:47 ` Eugen.Hristev
2018-11-21 8:47 ` [PATCH 1/3] dt-bindings: add vendor prefix for PDA Precision Design Associates, Inc Eugen.Hristev at microchip.com
2018-11-21 8:47 ` Eugen.Hristev
2018-11-21 8:47 ` Eugen.Hristev
2018-12-06 23:44 ` Rob Herring
2018-12-06 23:44 ` Rob Herring
2018-12-06 23:44 ` Rob Herring
2018-11-21 8:48 ` [PATCH 2/3] dt-bindings: drm/panel: simple: add support for PDA 91-00156-A0 Eugen.Hristev at microchip.com
2018-11-21 8:48 ` Eugen.Hristev
2018-11-21 8:48 ` Eugen.Hristev
2018-12-06 23:45 ` Rob Herring
2018-12-06 23:45 ` Rob Herring
2018-11-21 8:48 ` Eugen.Hristev at microchip.com [this message]
2018-11-21 8:48 ` [PATCH 3/3] drm/panel: simple: add support for PDA 91-00156-A0 panel Eugen.Hristev
2018-11-21 8:48 ` Eugen.Hristev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542789804-4584-4-git-send-email-eugen.hristev@microchip.com \
--to=eugen.hristev@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.