All of lore.kernel.org
 help / color / mirror / Atom feed
* issues communicating with SPI on Raspberry Pi 3
@ 2018-12-05 15:22 Kai Che
  2018-12-06  8:03 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Kai Che @ 2018-12-05 15:22 UTC (permalink / raw)
  To: barebox@lists.infradead.org

Hi all,

I'm trying to communicate with a TPM 2.0 (infineon,slb9670) over SPI on a Raspberry Pi 3 in barebox.

CONFIG_SPI=y
CONFIG_DRIVER_SPI_GPIO=y
CONFIG_CMD_SPI=y

are set in the barebox configuration and

dtparam=spi=on

is set in the /boot/config.txt on the raspberry pi.

But when checking /dev/ on barebox, there is nothing related to spi except cs0.

I would have expected something similiar to /dev/spidev0.0 showing up.

Did I miss any configurations?

Best Regrds,

Kai Che
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2018-12-06  8:03 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-05 15:22 issues communicating with SPI on Raspberry Pi 3 Kai Che
2018-12-06  8:03 ` Sascha Hauer

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.