All of lore.kernel.org
 help / color / mirror / Atom feed
From: Long Cheng <long.cheng@mediatek.com>
To: Sean Wang <sean.wang@kernel.org>
Cc: vkoul@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, srv_heupstream@mediatek.com,
	gregkh@linuxfoundation.org,
	"Sean Wang (王志亘)" <sean.wang@mediatek.com>,
	linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
	linux-mediatek@lists.infradead.org, linux-serial@vger.kernel.org,
	jslaby@suse.com, "Matthias Brugger" <matthias.bgg@gmail.com>,
	yingjoe.chen@mediatek.com, dan.j.williams@intel.com,
	linux-arm-kernel@lists.infradead.org, yt.shen@mediatek.com
Subject: [v2,2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
Date: Thu, 6 Dec 2018 17:55:40 +0800	[thread overview]
Message-ID: <1544090140.28871.11.camel@mhfsdcap03> (raw)

On Wed, 2018-12-05 at 13:07 -0800, Sean Wang wrote:
> .
> On Wed, Dec 5, 2018 at 1:31 AM Long Cheng <long.cheng@mediatek.com> wrote:
> >
> > In DMA engine framework, add 8250 mtk dma to support it.
> >
> > Signed-off-by: Long Cheng <long.cheng@mediatek.com>
> > ---
> >  drivers/dma/mediatek/8250_mtk_dma.c |  894 +++++++++++++++++++++++++++++++++++
> >  drivers/dma/mediatek/Kconfig        |   11 +
> >  drivers/dma/mediatek/Makefile       |    1 +
> >  3 files changed, 906 insertions(+)
> >  create mode 100644 drivers/dma/mediatek/8250_mtk_dma.c
> >
> > diff --git a/drivers/dma/mediatek/8250_mtk_dma.c b/drivers/dma/mediatek/8250_mtk_dma.c
> > new file mode 100644
> > index 0000000..3454679
> > --- /dev/null
> > +++ b/drivers/dma/mediatek/8250_mtk_dma.c
> > @@ -0,0 +1,894 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Mediatek 8250 DMA driver.
> > + *
> > + * Copyright (c) 2018 MediaTek Inc.
> > + * Author: Long Cheng <long.cheng@mediatek.com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/dmaengine.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/list.h>
> > +#include <linux/module.h>
> > +#include <linux/of_dma.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/iopoll.h>
> > +
> > +#include "../virt-dma.h"
> > +
> > +#define MTK_APDMA_DEFAULT_REQUESTS     127
> > +#define MTK_APDMA_CHANNELS             (CONFIG_SERIAL_8250_NR_UARTS * 2)
> > +
> > +#define VFF_EN_B               BIT(0)
> > +#define VFF_STOP_B             BIT(0)
> > +#define VFF_FLUSH_B            BIT(0)
> > +#define VFF_4G_SUPPORT_B       BIT(0)
> > +#define VFF_RX_INT_EN0_B       BIT(0)  /*rx valid size >=  vff thre*/
> > +#define VFF_RX_INT_EN1_B       BIT(1)
> > +#define VFF_TX_INT_EN_B                BIT(0)  /*tx left size >= vff thre*/
> > +#define VFF_WARM_RST_B         BIT(0)
> > +#define VFF_RX_INT_FLAG_CLR_B  (BIT(0) | BIT(1))
> > +#define VFF_TX_INT_FLAG_CLR_B  0
> > +#define VFF_STOP_CLR_B         0
> > +#define VFF_FLUSH_CLR_B                0
> > +#define VFF_INT_EN_CLR_B       0
> > +#define VFF_4G_SUPPORT_CLR_B   0
> > +
> > +/* interrupt trigger level for tx */
> > +#define VFF_TX_THRE(n)         ((n) * 7 / 8)
> > +/* interrupt trigger level for rx */
> > +#define VFF_RX_THRE(n)         ((n) * 3 / 4)
> > +
> > +#define MTK_DMA_RING_SIZE      0xffffU
> > +/* invert this bit when wrap ring head again*/
> > +#define MTK_DMA_RING_WRAP      0x10000U
> > +
> > +#define VFF_INT_FLAG           0x00
> > +#define VFF_INT_EN             0x04
> > +#define VFF_EN                 0x08
> > +#define VFF_RST                        0x0c
> > +#define VFF_STOP               0x10
> > +#define VFF_FLUSH              0x14
> > +#define VFF_ADDR               0x1c
> > +#define VFF_LEN                        0x24
> > +#define VFF_THRE               0x28
> > +#define VFF_WPT                        0x2c
> > +#define VFF_RPT                        0x30
> > +/*TX: the buffer size HW can read. RX: the buffer size SW can read.*/
> > +#define VFF_VALID_SIZE         0x3c
> > +/*TX: the buffer size SW can write. RX: the buffer size HW can write.*/
> > +#define VFF_LEFT_SIZE          0x40
> > +#define VFF_DEBUG_STATUS       0x50
> > +#define VFF_4G_SUPPORT         0x54
> > +
> > +struct mtk_dmadev {
> > +       struct dma_device ddev;
> > +       void __iomem *mem_base[MTK_APDMA_CHANNELS];
> > +       spinlock_t lock; /* dma dev lock */
> > +       struct tasklet_struct task;
> > +       struct list_head pending;
> > +       struct clk *clk;
> > +       unsigned int dma_requests;
> > +       bool support_33bits;
> > +       unsigned int dma_irq[MTK_APDMA_CHANNELS];
> > +       struct mtk_chan *ch[MTK_APDMA_CHANNELS];
> > +};
> > +
> > +struct mtk_chan {
> > +       struct virt_dma_chan vc;
> > +       struct list_head node;
> > +       struct dma_slave_config cfg;
> > +       void __iomem *base;
> > +       struct mtk_dma_desc *desc;
> > +
> > +       bool stop;
> > +       bool requested;
> > +
> > +       unsigned int dma_sig;
> 
> the member can be removed as no real user would refer to it
> 

Ok, i will remove it at next patch

> > +       unsigned int dma_ch;
> 
> a chan_id is already included in struct dma_chan, we can reuse it
> 

chan_id is start from 0. but in this driver, dma info is stored to list.
if use port1, in filter_fn function, will set dma_ch to 2, 3(tx, rx). So
can't using chan_id

> > +       unsigned int sgidx;
> 
> the member also can be removed as no real user would refer to it
> 

Ok, i will remove it at next patch

> > +       unsigned int remain_size;
> 
> The member remain_size seems unnecessary data to maintain a channel.
> The virtual channel struct virt_dma_chan already provide the way to
> manage all descriptors you're operating on, you should reuse related
> functions to virt_dma_chan first.
> 
> Or if you mean remain_size is about the remaining size of current
> descriptor, and then putting into struct mtk_dma_desc would be better.
> 

i will move it to mtk_dma_desc

> > +       unsigned int rx_ptr;
> > +};
> > +
> > +struct mtk_dma_sg {
> > +       dma_addr_t addr;
> > +       unsigned int en;                /* number of elements (24-bit) */
> > +       unsigned int fn;                /* number of frames (16-bit) */
> > +};
> > +
> > +struct mtk_dma_desc {
> > +       struct virt_dma_desc vd;
> > +       enum dma_transfer_direction dir;
> > +
> > +       unsigned int sglen;
> > +       struct mtk_dma_sg sg[0];
> > +};
> > +
> > +static bool mtk_dma_filter_fn(struct dma_chan *chan, void *param);
> > +static struct of_dma_filter_info mtk_dma_info = {
> > +       .filter_fn = mtk_dma_filter_fn,
> > +};
> > +
> > +static inline struct mtk_dmadev *to_mtk_dma_dev(struct dma_device *d)
> > +{
> > +       return container_of(d, struct mtk_dmadev, ddev);
> > +}
> > +
> > +static inline struct mtk_chan *to_mtk_dma_chan(struct dma_chan *c)
> > +{
> > +       return container_of(c, struct mtk_chan, vc.chan);
> > +}
> > +
> > +static inline struct mtk_dma_desc *to_mtk_dma_desc
> > +       (struct dma_async_tx_descriptor *t)
> > +{
> > +       return container_of(t, struct mtk_dma_desc, vd.tx);
> > +}
> > +
> > +static void mtk_dma_chan_write(struct mtk_chan *c,
> > +                              unsigned int reg, unsigned int val)
> > +{
> > +       writel(val, c->base + reg);
> > +}
> > +
> > +static unsigned int mtk_dma_chan_read(struct mtk_chan *c, unsigned int reg)
> > +{
> > +       return readl(c->base + reg);
> > +}
> > +
> > +static void mtk_dma_desc_free(struct virt_dma_desc *vd)
> > +{
> > +       struct dma_chan *chan = vd->tx.chan;
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       kfree(c->desc);
> > +       c->desc = NULL;
> > +}
> > +
> > +static int mtk_dma_clk_enable(struct mtk_dmadev *mtkd)
> > +{
> > +       int ret;
> > +
> > +       ret = clk_prepare_enable(mtkd->clk);
> > +       if (ret) {
> > +               dev_err(mtkd->ddev.dev, "Couldn't enable the clock\n");
> > +               return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static void mtk_dma_clk_disable(struct mtk_dmadev *mtkd)
> > +{
> > +       clk_disable_unprepare(mtkd->clk);
> > +}
> > +
> > +static void mtk_dma_remove_virt_list(dma_cookie_t cookie,
> > +                                    struct virt_dma_chan *vc)
> > +{
> > +       struct virt_dma_desc *vd;
> > +
> > +       if (list_empty(&vc->desc_issued) == 0) {
> > +               list_for_each_entry(vd, &vc->desc_issued, node) {
> > +                       if (cookie == vd->tx.cookie) {
> > +                               INIT_LIST_HEAD(&vc->desc_issued);
> 
> generally, we don't force initialze the list desc_issued. Instead,
> when each descriptor is completed, we need to move each descriptor
> from the list desc_issued to the list desc_completed.
> 

ok, i will modify it at next patch

> > +                               break;
> > +                       }
> > +               }
> > +       }
> > +}
> > +
> > +static void mtk_dma_tx_flush(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       if (mtk_dma_chan_read(c, VFF_FLUSH) == 0U)
> > +               mtk_dma_chan_write(c, VFF_FLUSH, VFF_FLUSH_B);
> > +}
> > +
> > +static void mtk_dma_tx_write(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned int txcount = c->remain_size;
> > +       unsigned int len, send, left, wpt, wrap;
> > +
> > +       len = mtk_dma_chan_read(c, VFF_LEN);
> > +
> > +       while ((left = mtk_dma_chan_read(c, VFF_LEFT_SIZE)) > 0U) {
> > +               if (c->remain_size == 0U)
> > +                       break;
> > +               send = min(left, c->remain_size);
> 
> min_t
> 

ok, i will modify it at next patch

> > +               wpt = mtk_dma_chan_read(c, VFF_WPT);
> > +               wrap = wpt & MTK_DMA_RING_WRAP ? 0U : MTK_DMA_RING_WRAP;
> > +
> > +               if ((wpt & (len - 1U)) + send < len)
> > +                       mtk_dma_chan_write(c, VFF_WPT, wpt + send);
> > +               else
> > +                       mtk_dma_chan_write(c, VFF_WPT,
> > +                                          ((wpt + send) & (len - 1U))
> > +                                          | wrap);
> > +
> > +               c->remain_size -= send;
> 
> I'm curious why you don't need to set up the hardware from the
> descriptor information
> 

mtk_dma_chan_write is update the hardware. remain_size is length of TX
data.

> > +       }
> > +
> > +       if (txcount != c->remain_size) {
> > +               mtk_dma_chan_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> > +               mtk_dma_tx_flush(chan);
> > +       }
> > +}
> > +
> > +static void mtk_dma_start_tx(struct mtk_chan *c)
> > +{
> > +       if (mtk_dma_chan_read(c, VFF_LEFT_SIZE) == 0U)
> > +               mtk_dma_chan_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> > +       else
> > +               mtk_dma_tx_write(&c->vc.chan);
> > +
> > +       c->stop = false;
> > +}
> > +
> > +static void mtk_dma_get_rx_size(struct mtk_chan *c)
> > +{
> > +       unsigned int rx_size = mtk_dma_chan_read(c, VFF_LEN);
> > +       unsigned int rdptr, wrptr, wrreg, rdreg, count;
> > +
> > +       rdreg = mtk_dma_chan_read(c, VFF_RPT);
> > +       wrreg = mtk_dma_chan_read(c, VFF_WPT);
> > +       rdptr = rdreg & MTK_DMA_RING_SIZE;
> > +       wrptr = wrreg & MTK_DMA_RING_SIZE;
> > +       count = ((rdreg ^ wrreg) & MTK_DMA_RING_WRAP) ?
> > +                       (wrptr + rx_size - rdptr) : (wrptr - rdptr);
> > +
> > +       c->remain_size = count;
> > +       c->rx_ptr = rdptr;
> > +
> > +       mtk_dma_chan_write(c, VFF_RPT, wrreg);
> > +}
> > +
> > +static void mtk_dma_start_rx(struct mtk_chan *c)
> > +{
> > +       struct dma_chan *chan = &c->vc.chan;
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_dma_desc *d = c->desc;
> > +
> > +       if (mtk_dma_chan_read(c, VFF_VALID_SIZE) == 0U)
> > +               return;
> > +
> > +       if (d && d->vd.tx.cookie != 0) {
> 
> the driver benefits from virtual_channel so you can manage the life
> cycle of each descriptor by the virtual channel related functions
> without handling details about the cookie.
> 

ok, i will modify it at next patch

> > +               mtk_dma_get_rx_size(c);
> > +               mtk_dma_remove_virt_list(d->vd.tx.cookie, &c->vc);
> > +               vchan_cookie_complete(&d->vd);
> > +       } else {
> > +               spin_lock(&mtkd->lock);
> > +               if (list_empty(&mtkd->pending))
> > +                       list_add_tail(&c->node, &mtkd->pending);
> > +               spin_unlock(&mtkd->lock);
> > +               tasklet_schedule(&mtkd->task);
> > +       }
> > +}
> > +
> > +static void mtk_dma_reset(struct mtk_chan *c)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(c->vc.chan.device);
> > +       u32 status;
> > +       int ret;
> > +
> > +       mtk_dma_chan_write(c, VFF_ADDR, 0);
> > +       mtk_dma_chan_write(c, VFF_THRE, 0);
> > +       mtk_dma_chan_write(c, VFF_LEN, 0);
> > +       mtk_dma_chan_write(c, VFF_RST, VFF_WARM_RST_B);
> > +
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_EN,
> > +                                status, status == 0, 10, 100);
> > +       if (ret) {
> > +               dev_err(c->vc.chan.device->dev,
> > +                               "dma reset: fail, timeout\n");
> > +               return;
> > +       }
> > +
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM)
> > +               mtk_dma_chan_write(c, VFF_RPT, 0);
> > +       else if (c->cfg.direction == DMA_MEM_TO_DEV)
> > +               mtk_dma_chan_write(c, VFF_WPT, 0);
> > +
> > +       if (mtkd->support_33bits)
> > +               mtk_dma_chan_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_CLR_B);
> > +}
> > +
> > +static void mtk_dma_stop(struct mtk_chan *c)
> > +{
> > +       u32 status;
> > +       int ret;
> > +
> > +       mtk_dma_chan_write(c, VFF_FLUSH, VFF_FLUSH_CLR_B);
> > +       /* Wait for flush */
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_FLUSH,
> > +                                status,
> > +                                (status & VFF_FLUSH_B) != VFF_FLUSH_B,
> > +                                10, 100);
> > +       if (ret)
> > +               dev_err(c->vc.chan.device->dev,
> > +                       "dma stop: polling FLUSH fail, DEBUG=0x%x\n",
> > +                       mtk_dma_chan_read(c, VFF_DEBUG_STATUS));
> > +
> > +       /*set stop as 1 -> wait until en is 0 -> set stop as 0*/
> > +       mtk_dma_chan_write(c, VFF_STOP, VFF_STOP_B);
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_EN,
> > +                                status, status == 0, 10, 100);
> > +       if (ret)
> > +               dev_err(c->vc.chan.device->dev,
> > +                       "dma stop: polling VFF_EN fail, DEBUG=0x%x\n",
> > +                       mtk_dma_chan_read(c, VFF_DEBUG_STATUS));
> > +
> > +       mtk_dma_chan_write(c, VFF_STOP, VFF_STOP_CLR_B);
> > +       mtk_dma_chan_write(c, VFF_INT_EN, VFF_INT_EN_CLR_B);
> > +
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM)
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +       else
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +
> > +       c->stop = true;
> > +}
> > +
> > +/*
> > + * This callback schedules all pending channels. We could be more
> > + * clever here by postponing allocation of the real DMA channels to
> > + * this point, and freeing them when our virtual channel becomes idle.
> > + *
> > + * We would then need to deal with 'all channels in-use'
> > + */
> > +static void mtk_dma_sched(unsigned long data)
> > +{
> > +       struct mtk_dmadev *mtkd = (struct mtk_dmadev *)data;
> > +       struct virt_dma_desc *vd;
> > +       struct mtk_chan *c;
> > +       dma_cookie_t cookie;
> > +       unsigned long flags;
> > +       LIST_HEAD(head);
> > +
> > +       spin_lock_irq(&mtkd->lock);
> > +       list_splice_tail_init(&mtkd->pending, &head);
> > +       spin_unlock_irq(&mtkd->lock);
> > +
> > +       if (!list_empty(&head)) {
> > +               c = list_first_entry(&head, struct mtk_chan, node);
> > +               cookie = c->vc.chan.cookie;
> > +
> > +               spin_lock_irqsave(&c->vc.lock, flags);
> > +               if (c->cfg.direction == DMA_DEV_TO_MEM) {
> > +                       list_del_init(&c->node);
> > +                       mtk_dma_start_rx(c);
> > +               } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +                       list_del_init(&c->node);
> > +                       mtk_dma_start_tx(c);
> > +               }
> > +               spin_unlock_irqrestore(&c->vc.lock, flags);
> > +       }
> > +}
> > +
> > +static int mtk_dma_alloc_chan_resources(struct dma_chan *chan)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       int ret = -EBUSY;
> > +
> > +       pm_runtime_get_sync(mtkd->ddev.dev);
> > +
> > +       if (!mtkd->ch[c->dma_ch]) {
> > +               c->base = mtkd->mem_base[c->dma_ch];
> > +               mtkd->ch[c->dma_ch] = c;
> > +               ret = 1;
> > +       }
> > +       c->requested = false;
> > +       mtk_dma_reset(c);
> > +
> > +       return ret;
> > +}
> > +
> > +static void mtk_dma_free_chan_resources(struct dma_chan *chan)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       if (c->requested) {
> > +               c->requested = false;
> > +               free_irq(mtkd->dma_irq[c->dma_ch], chan);
> > +       }
> > +
> > +       tasklet_kill(&mtkd->task);
> > +       tasklet_kill(&c->vc.task);
> > +
> > +       c->base = NULL;
> > +       mtkd->ch[c->dma_ch] = NULL;
> > +       vchan_free_chan_resources(&c->vc);
> > +
> > +       dev_dbg(mtkd->ddev.dev, "freeing channel for %u\n", c->dma_sig);
> > +       c->dma_sig = 0;
> > +
> > +       pm_runtime_put_sync(mtkd->ddev.dev);
> > +}
> > +
> > +static enum dma_status mtk_dma_tx_status(struct dma_chan *chan,
> > +                                        dma_cookie_t cookie,
> > +                                        struct dma_tx_state *txstate)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       enum dma_status ret;
> > +       unsigned long flags;
> > +
> > +       if (!txstate)
> > +               return DMA_ERROR;
> > +
> > +       ret = dma_cookie_status(chan, cookie, txstate);
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (ret == DMA_IN_PROGRESS) {
> > +               c->rx_ptr = mtk_dma_chan_read(c, VFF_RPT) & MTK_DMA_RING_SIZE;
> > +               dma_set_residue(txstate, c->rx_ptr);
> > +       } else if (ret == DMA_COMPLETE && c->cfg.direction == DMA_DEV_TO_MEM) {
> > +               dma_set_residue(txstate, c->remain_size);
> > +       } else {
> > +               dma_set_residue(txstate, 0);
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return ret;
> > +}
> > +
> > +static struct dma_async_tx_descriptor *mtk_dma_prep_slave_sg
> > +       (struct dma_chan *chan, struct scatterlist *sgl,
> > +       unsigned int sglen,     enum dma_transfer_direction dir,
> > +       unsigned long tx_flags, void *context)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct scatterlist *sgent;
> > +       struct mtk_dma_desc *d;
> > +       struct mtk_dma_sg *sg;
> > +       unsigned int size, i, j, en;
> > +
> > +       en = 1;
> > +
> > +       if ((dir != DMA_DEV_TO_MEM) &&
> > +               (dir != DMA_MEM_TO_DEV)) {
> > +               dev_err(chan->device->dev, "bad direction\n");
> > +               return NULL;
> > +       }
> > +
> > +       /* Now allocate and setup the descriptor. */
> > +       d = kzalloc(sizeof(*d) + sglen * sizeof(d->sg[0]), GFP_ATOMIC);
> > +       if (!d)
> > +               return NULL;
> > +
> > +       d->dir = dir;
> > +
> > +       j = 0;
> > +       for_each_sg(sgl, sgent, sglen, i) {
> > +               d->sg[j].addr = sg_dma_address(sgent);
> > +               d->sg[j].en = en;
> > +               d->sg[j].fn = sg_dma_len(sgent) / en;
> > +               j++;
> > +       }
> > +
> > +       d->sglen = j;
> > +
> > +       if (dir == DMA_MEM_TO_DEV) {
> > +               for (size = i = 0; i < d->sglen; i++) {
> > +                       sg = &d->sg[i];
> > +                       size += sg->en * sg->fn;
> > +               }
> > +               c->remain_size = size;
> > +       }
> > +
> > +       return vchan_tx_prep(&c->vc, &d->vd, tx_flags);
> > +}
> > +
> > +static void mtk_dma_issue_pending(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct virt_dma_desc *vd;
> > +       struct mtk_dmadev *mtkd;
> > +       dma_cookie_t cookie;
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM) {
> > +               cookie = c->vc.chan.cookie;
> > +               mtkd = to_mtk_dma_dev(chan->device);
> > +               if (vchan_issue_pending(&c->vc) && !c->desc) {
> 
> vchan_issue_pending means putting all the descriptors to list
> desc_issued, I'm supposed somewhere would iterate the list by
> vchan_next_desc and program each desc. into hardware. but I don't see
> the similar code.

ok, i will modify it at next patch

> 
> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +               }
> > +       } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> > +               cookie = c->vc.chan.cookie;
> > +               if (vchan_issue_pending(&c->vc) && !c->desc) {
> 
> ditto as the above
> 

ok, i will modify it at next patch

> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +                       mtk_dma_start_tx(c);
> > +               }
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +}
> > +
> > +static irqreturn_t mtk_dma_rx_interrupt(int irq, void *dev_id)
> > +{
> > +       struct dma_chan *chan = (struct dma_chan *)dev_id;
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +
> > +       mtk_dma_start_rx(c);
> > +
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t mtk_dma_tx_interrupt(int irq, void *dev_id)
> > +{
> > +       struct dma_chan *chan = (struct dma_chan *)dev_id;
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct mtk_dma_desc *d = c->desc;
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (c->remain_size != 0U) {
> > +               list_add_tail(&c->node, &mtkd->pending);
> > +               tasklet_schedule(&mtkd->task);
> > +       } else {
> > +               mtk_dma_remove_virt_list(d->vd.tx.cookie, &c->vc);
> > +               vchan_cookie_complete(&d->vd);
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static int mtk_dma_slave_config(struct dma_chan *chan,
> > +                               struct dma_slave_config *cfg)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(c->vc.chan.device);
> > +       int ret;
> > +
> > +       c->cfg = *cfg;
> > +
> > +       if (cfg->direction == DMA_DEV_TO_MEM) {
> > +               unsigned int rx_len = cfg->src_addr_width * 1024;
> > +
> > +               mtk_dma_chan_write(c, VFF_ADDR, cfg->src_addr);
> > +               mtk_dma_chan_write(c, VFF_LEN, rx_len);
> > +               mtk_dma_chan_write(c, VFF_THRE, VFF_RX_THRE(rx_len));
> > +               mtk_dma_chan_write(c,
> > +                                  VFF_INT_EN, VFF_RX_INT_EN0_B
> > +                                  | VFF_RX_INT_EN1_B);
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +               mtk_dma_chan_write(c, VFF_EN, VFF_EN_B);
> > +
> > +               if (!c->requested) {
> > +                       c->requested = true;
> > +                       ret = request_irq(mtkd->dma_irq[c->dma_ch],
> > +                                         mtk_dma_rx_interrupt,
> > +                                         IRQF_TRIGGER_NONE,
> > +                                         KBUILD_MODNAME, chan);
> > +                       if (ret < 0) {
> > +                               dev_err(chan->device->dev, "Can't request rx dma IRQ\n");
> > +                               return -EINVAL;
> > +                       }
> > +               }
> > +       } else if (cfg->direction == DMA_MEM_TO_DEV)    {
> > +               unsigned int tx_len = cfg->dst_addr_width * 1024;
> > +
> > +               mtk_dma_chan_write(c, VFF_ADDR, cfg->dst_addr);
> > +               mtk_dma_chan_write(c, VFF_LEN, tx_len);
> > +               mtk_dma_chan_write(c, VFF_THRE, VFF_TX_THRE(tx_len));
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +               mtk_dma_chan_write(c, VFF_EN, VFF_EN_B);
> > +
> > +               if (!c->requested) {
> > +                       c->requested = true;
> > +                       ret = request_irq(mtkd->dma_irq[c->dma_ch],
> > +                                         mtk_dma_tx_interrupt,
> > +                                         IRQF_TRIGGER_NONE,
> > +                                         KBUILD_MODNAME, chan);
> > +                       if (ret < 0) {
> > +                               dev_err(chan->device->dev, "Can't request tx dma IRQ\n");
> > +                               return -EINVAL;
> > +                       }
> > +               }
> > +       }
> > +
> > +       if (mtkd->support_33bits)
> > +               mtk_dma_chan_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_B);
> > +
> > +       if (mtk_dma_chan_read(c, VFF_EN) != VFF_EN_B) {
> > +               dev_err(chan->device->dev,
> > +                       "config dma dir[%d] fail\n", cfg->direction);
> > +               return -EINVAL;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_terminate_all(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       list_del_init(&c->node);
> > +       mtk_dma_stop(c);
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_device_pause(struct dma_chan *chan)
> > +{
> > +       /* just for check caps pass */
> > +       return -EINVAL;
> > +}
> 
> it it possible not to register the function to the core if the
> hardware doesn't support it?
> 

can't support. the function will set to cmd_pause. in 8250 serial code,
will check cmd_pause. if no the function, will can't get DMA channel.
So 
the function just for this.

> > +
> > +static int mtk_dma_device_resume(struct dma_chan *chan)
> > +{
> > +       /* just for check caps pass */
> > +       return -EINVAL;
> > +}
> 
> ditto as the above
> 
> > +
> > +static void mtk_dma_free(struct mtk_dmadev *mtkd)
> > +{
> > +       tasklet_kill(&mtkd->task);
> > +       while (list_empty(&mtkd->ddev.channels) == 0) {
> > +               struct mtk_chan *c = list_first_entry(&mtkd->ddev.channels,
> > +                       struct mtk_chan, vc.chan.device_node);
> > +
> > +               list_del(&c->vc.chan.device_node);
> > +               tasklet_kill(&c->vc.task);
> > +               devm_kfree(mtkd->ddev.dev, c);
> > +       }
> > +}
> > +
> > +static const struct of_device_id mtk_uart_dma_match[] = {
> > +       { .compatible = "mediatek,mt6577-uart-dma", },
> > +       { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, mtk_uart_dma_match);
> > +
> > +static int mtk_apdma_probe(struct platform_device *pdev)
> > +{
> > +       struct mtk_dmadev *mtkd;
> > +       struct resource *res;
> > +       struct mtk_chan *c;
> > +       unsigned int i;
> > +       int rc;
> > +
> > +       mtkd = devm_kzalloc(&pdev->dev, sizeof(*mtkd), GFP_KERNEL);
> > +       if (!mtkd)
> > +               return -ENOMEM;
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               res = platform_get_resource(pdev, IORESOURCE_MEM, i);
> > +               if (!res)
> > +                       return -ENODEV;
> > +               mtkd->mem_base[i] = devm_ioremap_resource(&pdev->dev, res);
> > +               if (IS_ERR(mtkd->mem_base[i]))
> > +                       return PTR_ERR(mtkd->mem_base[i]);
> > +       }
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               mtkd->dma_irq[i] = platform_get_irq(pdev, i);
> > +               if ((int)mtkd->dma_irq[i] < 0) {
> > +                       dev_err(&pdev->dev, "failed to get IRQ[%d]\n", i);
> > +                       return -EINVAL;
> > +               }
> > +       }
> > +
> > +       mtkd->clk = devm_clk_get(&pdev->dev, NULL);
> > +       if (IS_ERR(mtkd->clk)) {
> > +               dev_err(&pdev->dev, "No clock specified\n");
> > +               return PTR_ERR(mtkd->clk);
> > +       }
> > +
> > +       if (of_property_read_bool(pdev->dev.of_node, "dma-33bits")) {
> > +               dev_info(&pdev->dev, "Support dma 33bits\n");
> > +               mtkd->support_33bits = true;
> > +       }
> > +
> > +       if (mtkd->support_33bits)
> > +               rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(33));
> > +       else
> > +               rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> > +       if (rc)
> > +               return rc;
> > +
> > +       dma_cap_set(DMA_SLAVE, mtkd->ddev.cap_mask);
> > +       mtkd->ddev.device_alloc_chan_resources = mtk_dma_alloc_chan_resources;
> > +       mtkd->ddev.device_free_chan_resources = mtk_dma_free_chan_resources;
> > +       mtkd->ddev.device_tx_status = mtk_dma_tx_status;
> > +       mtkd->ddev.device_issue_pending = mtk_dma_issue_pending;
> > +       mtkd->ddev.device_prep_slave_sg = mtk_dma_prep_slave_sg;
> > +       mtkd->ddev.device_config = mtk_dma_slave_config;
> > +       mtkd->ddev.device_pause = mtk_dma_device_pause;
> > +       mtkd->ddev.device_resume = mtk_dma_device_resume;
> > +       mtkd->ddev.device_terminate_all = mtk_dma_terminate_all;
> > +       mtkd->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> > +       mtkd->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> > +       mtkd->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
> > +       mtkd->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
> > +       mtkd->ddev.dev = &pdev->dev;
> > +       INIT_LIST_HEAD(&mtkd->ddev.channels);
> > +       INIT_LIST_HEAD(&mtkd->pending);
> > +
> > +       spin_lock_init(&mtkd->lock);
> > +       tasklet_init(&mtkd->task, mtk_dma_sched, (unsigned long)mtkd);
> > +
> > +       mtkd->dma_requests = MTK_APDMA_DEFAULT_REQUESTS;
> > +       if (of_property_read_u32(pdev->dev.of_node,
> > +                                "dma-requests", &mtkd->dma_requests)) {
> > +               dev_info(&pdev->dev,
> > +                        "Missing dma-requests property, using %u.\n",
> > +                        MTK_APDMA_DEFAULT_REQUESTS);
> > +       }
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               c = devm_kzalloc(mtkd->ddev.dev, sizeof(*c), GFP_KERNEL);
> > +               if (!c)
> > +                       goto err_no_dma;
> > +
> > +               c->vc.desc_free = mtk_dma_desc_free;
> > +               vchan_init(&c->vc, &mtkd->ddev);
> > +               INIT_LIST_HEAD(&c->node);
> > +       }
> > +
> > +       pm_runtime_enable(&pdev->dev);
> > +       pm_runtime_set_active(&pdev->dev);
> > +
> > +       rc = dma_async_device_register(&mtkd->ddev);
> > +       if (rc)
> > +               goto rpm_disable;
> > +
> > +       platform_set_drvdata(pdev, mtkd);
> > +
> > +       if (pdev->dev.of_node) {
> > +               mtk_dma_info.dma_cap = mtkd->ddev.cap_mask;
> > +
> > +               /* Device-tree DMA controller registration */
> > +               rc = of_dma_controller_register(pdev->dev.of_node,
> > +                                               of_dma_simple_xlate,
> > +                                               &mtk_dma_info);
> 
> reusing of_dma_xlate_by_chan_id seem that also work for you.

in filter_fn function, neeg get number of dma.
> 
> > +               if (rc)
> > +                       goto dma_remove;
> > +       }
> > +
> > +       return rc;
> > +
> > +dma_remove:
> > +       dma_async_device_unregister(&mtkd->ddev);
> > +rpm_disable:
> > +       pm_runtime_disable(&pdev->dev);
> > +err_no_dma:
> > +       mtk_dma_free(mtkd);
> > +       return rc;
> > +}
> > +
> > +static int mtk_apdma_remove(struct platform_device *pdev)
> > +{
> > +       struct mtk_dmadev *mtkd = platform_get_drvdata(pdev);
> > +
> > +       if (pdev->dev.of_node)
> > +               of_dma_controller_free(pdev->dev.of_node);
> > +
> > +       pm_runtime_disable(&pdev->dev);
> > +       pm_runtime_put_noidle(&pdev->dev);
> > +
> > +       dma_async_device_unregister(&mtkd->ddev);
> > +
> > +       mtk_dma_free(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int mtk_dma_suspend(struct device *dev)
> > +{
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       if (!pm_runtime_suspended(dev))
> > +               mtk_dma_clk_disable(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_resume(struct device *dev)
> > +{
> > +       int ret;
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       if (!pm_runtime_suspended(dev)) {
> > +               ret = mtk_dma_clk_enable(mtkd);
> > +               if (ret)
> > +                       return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_runtime_suspend(struct device *dev)
> > +{
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       mtk_dma_clk_disable(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_runtime_resume(struct device *dev)
> > +{
> > +       int ret;
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       ret = mtk_dma_clk_enable(mtkd);
> > +       if (ret)
> > +               return ret;
> > +
> > +       return 0;
> > +}
> > +
> > +#endif /* CONFIG_PM_SLEEP */
> > +
> > +static const struct dev_pm_ops mtk_dma_pm_ops = {
> > +       SET_SYSTEM_SLEEP_PM_OPS(mtk_dma_suspend, mtk_dma_resume)
> > +       SET_RUNTIME_PM_OPS(mtk_dma_runtime_suspend,
> > +                          mtk_dma_runtime_resume, NULL)
> > +};
> > +
> > +static struct platform_driver mtk_dma_driver = {
> > +       .probe  = mtk_apdma_probe,
> > +       .remove = mtk_apdma_remove,
> > +       .driver = {
> > +               .name           = KBUILD_MODNAME,
> > +               .pm             = &mtk_dma_pm_ops,
> > +               .of_match_table = of_match_ptr(mtk_uart_dma_match),
> > +       },
> > +};
> > +
> > +static bool mtk_dma_filter_fn(struct dma_chan *chan, void *param)
> > +{
> > +       if (chan->device->dev->driver == &mtk_dma_driver.driver) {
> > +               struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +               struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +               unsigned int req = *(unsigned int *)param;
> > +
> > +               if (req <= mtkd->dma_requests) {
> > +                       c->dma_sig = req;
> > +                       c->dma_ch = req;
> > +                       return true;
> > +               }
> > +       }
> > +       return false;
> > +}
> > +
> > +module_platform_driver(mtk_dma_driver);
> > +
> > +MODULE_DESCRIPTION("MediaTek UART APDMA Controller Driver");
> > +MODULE_AUTHOR("Long Cheng <long.cheng@mediatek.com>");
> > +MODULE_LICENSE("GPL v2");
> > +
> > diff --git a/drivers/dma/mediatek/Kconfig b/drivers/dma/mediatek/Kconfig
> > index 27bac0b..bef436e 100644
> > --- a/drivers/dma/mediatek/Kconfig
> > +++ b/drivers/dma/mediatek/Kconfig
> > @@ -1,4 +1,15 @@
> >
> > +config DMA_MTK_UART
> > +       tristate "MediaTek SoCs APDMA support for UART"
> > +       depends on OF
> > +       select DMA_ENGINE
> > +       select DMA_VIRTUAL_CHANNELS
> > +       help
> > +         Support for the UART DMA engine found on MediaTek MTK SoCs.
> > +         when 8250 mtk uart is enabled, and if you want to using DMA,
> > +         you can enable the config. the DMA engine just only be used
> > +         with MediaTek Socs.
> > +
> >  config MTK_HSDMA
> >         tristate "MediaTek High-Speed DMA controller support"
> >         depends on ARCH_MEDIATEK || COMPILE_TEST
> > diff --git a/drivers/dma/mediatek/Makefile b/drivers/dma/mediatek/Makefile
> > index 6e778f8..2f2efd9 100644
> > --- a/drivers/dma/mediatek/Makefile
> > +++ b/drivers/dma/mediatek/Makefile
> > @@ -1 +1,2 @@
> > +obj-$(CONFIG_DMA_MTK_UART) += 8250_mtk_dma.o
> >  obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
> > --
> > 1.7.9.5
> >
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Long Cheng <long.cheng@mediatek.com>
To: Sean Wang <sean.wang@kernel.org>
Cc: vkoul@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, srv_heupstream@mediatek.com,
	gregkh@linuxfoundation.org,
	"Sean Wang (王志亘)" <sean.wang@mediatek.com>,
	linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
	linux-mediatek@lists.infradead.org, linux-serial@vger.kernel.org,
	jslaby@suse.com, "Matthias Brugger" <matthias.bgg@gmail.com>,
	yingjoe.chen@mediatek.com, dan.j.williams@intel.com,
	linux-arm-kernel@lists.infradead.org, yt.shen@mediatek.com
Subject: Re: [PATCH v2 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
Date: Thu, 6 Dec 2018 17:55:40 +0800	[thread overview]
Message-ID: <1544090140.28871.11.camel@mhfsdcap03> (raw)
In-Reply-To: <CAGp9LzqkOHPqVmAOR+YRotOb511BEDOpUWHc-YSjphF3Gpar=w@mail.gmail.com>

On Wed, 2018-12-05 at 13:07 -0800, Sean Wang wrote:
> .
> On Wed, Dec 5, 2018 at 1:31 AM Long Cheng <long.cheng@mediatek.com> wrote:
> >
> > In DMA engine framework, add 8250 mtk dma to support it.
> >
> > Signed-off-by: Long Cheng <long.cheng@mediatek.com>
> > ---
> >  drivers/dma/mediatek/8250_mtk_dma.c |  894 +++++++++++++++++++++++++++++++++++
> >  drivers/dma/mediatek/Kconfig        |   11 +
> >  drivers/dma/mediatek/Makefile       |    1 +
> >  3 files changed, 906 insertions(+)
> >  create mode 100644 drivers/dma/mediatek/8250_mtk_dma.c
> >
> > diff --git a/drivers/dma/mediatek/8250_mtk_dma.c b/drivers/dma/mediatek/8250_mtk_dma.c
> > new file mode 100644
> > index 0000000..3454679
> > --- /dev/null
> > +++ b/drivers/dma/mediatek/8250_mtk_dma.c
> > @@ -0,0 +1,894 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Mediatek 8250 DMA driver.
> > + *
> > + * Copyright (c) 2018 MediaTek Inc.
> > + * Author: Long Cheng <long.cheng@mediatek.com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/dmaengine.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/list.h>
> > +#include <linux/module.h>
> > +#include <linux/of_dma.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/iopoll.h>
> > +
> > +#include "../virt-dma.h"
> > +
> > +#define MTK_APDMA_DEFAULT_REQUESTS     127
> > +#define MTK_APDMA_CHANNELS             (CONFIG_SERIAL_8250_NR_UARTS * 2)
> > +
> > +#define VFF_EN_B               BIT(0)
> > +#define VFF_STOP_B             BIT(0)
> > +#define VFF_FLUSH_B            BIT(0)
> > +#define VFF_4G_SUPPORT_B       BIT(0)
> > +#define VFF_RX_INT_EN0_B       BIT(0)  /*rx valid size >=  vff thre*/
> > +#define VFF_RX_INT_EN1_B       BIT(1)
> > +#define VFF_TX_INT_EN_B                BIT(0)  /*tx left size >= vff thre*/
> > +#define VFF_WARM_RST_B         BIT(0)
> > +#define VFF_RX_INT_FLAG_CLR_B  (BIT(0) | BIT(1))
> > +#define VFF_TX_INT_FLAG_CLR_B  0
> > +#define VFF_STOP_CLR_B         0
> > +#define VFF_FLUSH_CLR_B                0
> > +#define VFF_INT_EN_CLR_B       0
> > +#define VFF_4G_SUPPORT_CLR_B   0
> > +
> > +/* interrupt trigger level for tx */
> > +#define VFF_TX_THRE(n)         ((n) * 7 / 8)
> > +/* interrupt trigger level for rx */
> > +#define VFF_RX_THRE(n)         ((n) * 3 / 4)
> > +
> > +#define MTK_DMA_RING_SIZE      0xffffU
> > +/* invert this bit when wrap ring head again*/
> > +#define MTK_DMA_RING_WRAP      0x10000U
> > +
> > +#define VFF_INT_FLAG           0x00
> > +#define VFF_INT_EN             0x04
> > +#define VFF_EN                 0x08
> > +#define VFF_RST                        0x0c
> > +#define VFF_STOP               0x10
> > +#define VFF_FLUSH              0x14
> > +#define VFF_ADDR               0x1c
> > +#define VFF_LEN                        0x24
> > +#define VFF_THRE               0x28
> > +#define VFF_WPT                        0x2c
> > +#define VFF_RPT                        0x30
> > +/*TX: the buffer size HW can read. RX: the buffer size SW can read.*/
> > +#define VFF_VALID_SIZE         0x3c
> > +/*TX: the buffer size SW can write. RX: the buffer size HW can write.*/
> > +#define VFF_LEFT_SIZE          0x40
> > +#define VFF_DEBUG_STATUS       0x50
> > +#define VFF_4G_SUPPORT         0x54
> > +
> > +struct mtk_dmadev {
> > +       struct dma_device ddev;
> > +       void __iomem *mem_base[MTK_APDMA_CHANNELS];
> > +       spinlock_t lock; /* dma dev lock */
> > +       struct tasklet_struct task;
> > +       struct list_head pending;
> > +       struct clk *clk;
> > +       unsigned int dma_requests;
> > +       bool support_33bits;
> > +       unsigned int dma_irq[MTK_APDMA_CHANNELS];
> > +       struct mtk_chan *ch[MTK_APDMA_CHANNELS];
> > +};
> > +
> > +struct mtk_chan {
> > +       struct virt_dma_chan vc;
> > +       struct list_head node;
> > +       struct dma_slave_config cfg;
> > +       void __iomem *base;
> > +       struct mtk_dma_desc *desc;
> > +
> > +       bool stop;
> > +       bool requested;
> > +
> > +       unsigned int dma_sig;
> 
> the member can be removed as no real user would refer to it
> 

Ok, i will remove it at next patch

> > +       unsigned int dma_ch;
> 
> a chan_id is already included in struct dma_chan, we can reuse it
> 

chan_id is start from 0. but in this driver, dma info is stored to list.
if use port1, in filter_fn function, will set dma_ch to 2, 3(tx, rx). So
can't using chan_id

> > +       unsigned int sgidx;
> 
> the member also can be removed as no real user would refer to it
> 

Ok, i will remove it at next patch

> > +       unsigned int remain_size;
> 
> The member remain_size seems unnecessary data to maintain a channel.
> The virtual channel struct virt_dma_chan already provide the way to
> manage all descriptors you're operating on, you should reuse related
> functions to virt_dma_chan first.
> 
> Or if you mean remain_size is about the remaining size of current
> descriptor, and then putting into struct mtk_dma_desc would be better.
> 

i will move it to mtk_dma_desc

> > +       unsigned int rx_ptr;
> > +};
> > +
> > +struct mtk_dma_sg {
> > +       dma_addr_t addr;
> > +       unsigned int en;                /* number of elements (24-bit) */
> > +       unsigned int fn;                /* number of frames (16-bit) */
> > +};
> > +
> > +struct mtk_dma_desc {
> > +       struct virt_dma_desc vd;
> > +       enum dma_transfer_direction dir;
> > +
> > +       unsigned int sglen;
> > +       struct mtk_dma_sg sg[0];
> > +};
> > +
> > +static bool mtk_dma_filter_fn(struct dma_chan *chan, void *param);
> > +static struct of_dma_filter_info mtk_dma_info = {
> > +       .filter_fn = mtk_dma_filter_fn,
> > +};
> > +
> > +static inline struct mtk_dmadev *to_mtk_dma_dev(struct dma_device *d)
> > +{
> > +       return container_of(d, struct mtk_dmadev, ddev);
> > +}
> > +
> > +static inline struct mtk_chan *to_mtk_dma_chan(struct dma_chan *c)
> > +{
> > +       return container_of(c, struct mtk_chan, vc.chan);
> > +}
> > +
> > +static inline struct mtk_dma_desc *to_mtk_dma_desc
> > +       (struct dma_async_tx_descriptor *t)
> > +{
> > +       return container_of(t, struct mtk_dma_desc, vd.tx);
> > +}
> > +
> > +static void mtk_dma_chan_write(struct mtk_chan *c,
> > +                              unsigned int reg, unsigned int val)
> > +{
> > +       writel(val, c->base + reg);
> > +}
> > +
> > +static unsigned int mtk_dma_chan_read(struct mtk_chan *c, unsigned int reg)
> > +{
> > +       return readl(c->base + reg);
> > +}
> > +
> > +static void mtk_dma_desc_free(struct virt_dma_desc *vd)
> > +{
> > +       struct dma_chan *chan = vd->tx.chan;
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       kfree(c->desc);
> > +       c->desc = NULL;
> > +}
> > +
> > +static int mtk_dma_clk_enable(struct mtk_dmadev *mtkd)
> > +{
> > +       int ret;
> > +
> > +       ret = clk_prepare_enable(mtkd->clk);
> > +       if (ret) {
> > +               dev_err(mtkd->ddev.dev, "Couldn't enable the clock\n");
> > +               return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static void mtk_dma_clk_disable(struct mtk_dmadev *mtkd)
> > +{
> > +       clk_disable_unprepare(mtkd->clk);
> > +}
> > +
> > +static void mtk_dma_remove_virt_list(dma_cookie_t cookie,
> > +                                    struct virt_dma_chan *vc)
> > +{
> > +       struct virt_dma_desc *vd;
> > +
> > +       if (list_empty(&vc->desc_issued) == 0) {
> > +               list_for_each_entry(vd, &vc->desc_issued, node) {
> > +                       if (cookie == vd->tx.cookie) {
> > +                               INIT_LIST_HEAD(&vc->desc_issued);
> 
> generally, we don't force initialze the list desc_issued. Instead,
> when each descriptor is completed, we need to move each descriptor
> from the list desc_issued to the list desc_completed.
> 

ok, i will modify it at next patch

> > +                               break;
> > +                       }
> > +               }
> > +       }
> > +}
> > +
> > +static void mtk_dma_tx_flush(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       if (mtk_dma_chan_read(c, VFF_FLUSH) == 0U)
> > +               mtk_dma_chan_write(c, VFF_FLUSH, VFF_FLUSH_B);
> > +}
> > +
> > +static void mtk_dma_tx_write(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned int txcount = c->remain_size;
> > +       unsigned int len, send, left, wpt, wrap;
> > +
> > +       len = mtk_dma_chan_read(c, VFF_LEN);
> > +
> > +       while ((left = mtk_dma_chan_read(c, VFF_LEFT_SIZE)) > 0U) {
> > +               if (c->remain_size == 0U)
> > +                       break;
> > +               send = min(left, c->remain_size);
> 
> min_t
> 

ok, i will modify it at next patch

> > +               wpt = mtk_dma_chan_read(c, VFF_WPT);
> > +               wrap = wpt & MTK_DMA_RING_WRAP ? 0U : MTK_DMA_RING_WRAP;
> > +
> > +               if ((wpt & (len - 1U)) + send < len)
> > +                       mtk_dma_chan_write(c, VFF_WPT, wpt + send);
> > +               else
> > +                       mtk_dma_chan_write(c, VFF_WPT,
> > +                                          ((wpt + send) & (len - 1U))
> > +                                          | wrap);
> > +
> > +               c->remain_size -= send;
> 
> I'm curious why you don't need to set up the hardware from the
> descriptor information
> 

mtk_dma_chan_write is update the hardware. remain_size is length of TX
data.

> > +       }
> > +
> > +       if (txcount != c->remain_size) {
> > +               mtk_dma_chan_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> > +               mtk_dma_tx_flush(chan);
> > +       }
> > +}
> > +
> > +static void mtk_dma_start_tx(struct mtk_chan *c)
> > +{
> > +       if (mtk_dma_chan_read(c, VFF_LEFT_SIZE) == 0U)
> > +               mtk_dma_chan_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> > +       else
> > +               mtk_dma_tx_write(&c->vc.chan);
> > +
> > +       c->stop = false;
> > +}
> > +
> > +static void mtk_dma_get_rx_size(struct mtk_chan *c)
> > +{
> > +       unsigned int rx_size = mtk_dma_chan_read(c, VFF_LEN);
> > +       unsigned int rdptr, wrptr, wrreg, rdreg, count;
> > +
> > +       rdreg = mtk_dma_chan_read(c, VFF_RPT);
> > +       wrreg = mtk_dma_chan_read(c, VFF_WPT);
> > +       rdptr = rdreg & MTK_DMA_RING_SIZE;
> > +       wrptr = wrreg & MTK_DMA_RING_SIZE;
> > +       count = ((rdreg ^ wrreg) & MTK_DMA_RING_WRAP) ?
> > +                       (wrptr + rx_size - rdptr) : (wrptr - rdptr);
> > +
> > +       c->remain_size = count;
> > +       c->rx_ptr = rdptr;
> > +
> > +       mtk_dma_chan_write(c, VFF_RPT, wrreg);
> > +}
> > +
> > +static void mtk_dma_start_rx(struct mtk_chan *c)
> > +{
> > +       struct dma_chan *chan = &c->vc.chan;
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_dma_desc *d = c->desc;
> > +
> > +       if (mtk_dma_chan_read(c, VFF_VALID_SIZE) == 0U)
> > +               return;
> > +
> > +       if (d && d->vd.tx.cookie != 0) {
> 
> the driver benefits from virtual_channel so you can manage the life
> cycle of each descriptor by the virtual channel related functions
> without handling details about the cookie.
> 

ok, i will modify it at next patch

> > +               mtk_dma_get_rx_size(c);
> > +               mtk_dma_remove_virt_list(d->vd.tx.cookie, &c->vc);
> > +               vchan_cookie_complete(&d->vd);
> > +       } else {
> > +               spin_lock(&mtkd->lock);
> > +               if (list_empty(&mtkd->pending))
> > +                       list_add_tail(&c->node, &mtkd->pending);
> > +               spin_unlock(&mtkd->lock);
> > +               tasklet_schedule(&mtkd->task);
> > +       }
> > +}
> > +
> > +static void mtk_dma_reset(struct mtk_chan *c)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(c->vc.chan.device);
> > +       u32 status;
> > +       int ret;
> > +
> > +       mtk_dma_chan_write(c, VFF_ADDR, 0);
> > +       mtk_dma_chan_write(c, VFF_THRE, 0);
> > +       mtk_dma_chan_write(c, VFF_LEN, 0);
> > +       mtk_dma_chan_write(c, VFF_RST, VFF_WARM_RST_B);
> > +
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_EN,
> > +                                status, status == 0, 10, 100);
> > +       if (ret) {
> > +               dev_err(c->vc.chan.device->dev,
> > +                               "dma reset: fail, timeout\n");
> > +               return;
> > +       }
> > +
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM)
> > +               mtk_dma_chan_write(c, VFF_RPT, 0);
> > +       else if (c->cfg.direction == DMA_MEM_TO_DEV)
> > +               mtk_dma_chan_write(c, VFF_WPT, 0);
> > +
> > +       if (mtkd->support_33bits)
> > +               mtk_dma_chan_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_CLR_B);
> > +}
> > +
> > +static void mtk_dma_stop(struct mtk_chan *c)
> > +{
> > +       u32 status;
> > +       int ret;
> > +
> > +       mtk_dma_chan_write(c, VFF_FLUSH, VFF_FLUSH_CLR_B);
> > +       /* Wait for flush */
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_FLUSH,
> > +                                status,
> > +                                (status & VFF_FLUSH_B) != VFF_FLUSH_B,
> > +                                10, 100);
> > +       if (ret)
> > +               dev_err(c->vc.chan.device->dev,
> > +                       "dma stop: polling FLUSH fail, DEBUG=0x%x\n",
> > +                       mtk_dma_chan_read(c, VFF_DEBUG_STATUS));
> > +
> > +       /*set stop as 1 -> wait until en is 0 -> set stop as 0*/
> > +       mtk_dma_chan_write(c, VFF_STOP, VFF_STOP_B);
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_EN,
> > +                                status, status == 0, 10, 100);
> > +       if (ret)
> > +               dev_err(c->vc.chan.device->dev,
> > +                       "dma stop: polling VFF_EN fail, DEBUG=0x%x\n",
> > +                       mtk_dma_chan_read(c, VFF_DEBUG_STATUS));
> > +
> > +       mtk_dma_chan_write(c, VFF_STOP, VFF_STOP_CLR_B);
> > +       mtk_dma_chan_write(c, VFF_INT_EN, VFF_INT_EN_CLR_B);
> > +
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM)
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +       else
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +
> > +       c->stop = true;
> > +}
> > +
> > +/*
> > + * This callback schedules all pending channels. We could be more
> > + * clever here by postponing allocation of the real DMA channels to
> > + * this point, and freeing them when our virtual channel becomes idle.
> > + *
> > + * We would then need to deal with 'all channels in-use'
> > + */
> > +static void mtk_dma_sched(unsigned long data)
> > +{
> > +       struct mtk_dmadev *mtkd = (struct mtk_dmadev *)data;
> > +       struct virt_dma_desc *vd;
> > +       struct mtk_chan *c;
> > +       dma_cookie_t cookie;
> > +       unsigned long flags;
> > +       LIST_HEAD(head);
> > +
> > +       spin_lock_irq(&mtkd->lock);
> > +       list_splice_tail_init(&mtkd->pending, &head);
> > +       spin_unlock_irq(&mtkd->lock);
> > +
> > +       if (!list_empty(&head)) {
> > +               c = list_first_entry(&head, struct mtk_chan, node);
> > +               cookie = c->vc.chan.cookie;
> > +
> > +               spin_lock_irqsave(&c->vc.lock, flags);
> > +               if (c->cfg.direction == DMA_DEV_TO_MEM) {
> > +                       list_del_init(&c->node);
> > +                       mtk_dma_start_rx(c);
> > +               } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +                       list_del_init(&c->node);
> > +                       mtk_dma_start_tx(c);
> > +               }
> > +               spin_unlock_irqrestore(&c->vc.lock, flags);
> > +       }
> > +}
> > +
> > +static int mtk_dma_alloc_chan_resources(struct dma_chan *chan)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       int ret = -EBUSY;
> > +
> > +       pm_runtime_get_sync(mtkd->ddev.dev);
> > +
> > +       if (!mtkd->ch[c->dma_ch]) {
> > +               c->base = mtkd->mem_base[c->dma_ch];
> > +               mtkd->ch[c->dma_ch] = c;
> > +               ret = 1;
> > +       }
> > +       c->requested = false;
> > +       mtk_dma_reset(c);
> > +
> > +       return ret;
> > +}
> > +
> > +static void mtk_dma_free_chan_resources(struct dma_chan *chan)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       if (c->requested) {
> > +               c->requested = false;
> > +               free_irq(mtkd->dma_irq[c->dma_ch], chan);
> > +       }
> > +
> > +       tasklet_kill(&mtkd->task);
> > +       tasklet_kill(&c->vc.task);
> > +
> > +       c->base = NULL;
> > +       mtkd->ch[c->dma_ch] = NULL;
> > +       vchan_free_chan_resources(&c->vc);
> > +
> > +       dev_dbg(mtkd->ddev.dev, "freeing channel for %u\n", c->dma_sig);
> > +       c->dma_sig = 0;
> > +
> > +       pm_runtime_put_sync(mtkd->ddev.dev);
> > +}
> > +
> > +static enum dma_status mtk_dma_tx_status(struct dma_chan *chan,
> > +                                        dma_cookie_t cookie,
> > +                                        struct dma_tx_state *txstate)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       enum dma_status ret;
> > +       unsigned long flags;
> > +
> > +       if (!txstate)
> > +               return DMA_ERROR;
> > +
> > +       ret = dma_cookie_status(chan, cookie, txstate);
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (ret == DMA_IN_PROGRESS) {
> > +               c->rx_ptr = mtk_dma_chan_read(c, VFF_RPT) & MTK_DMA_RING_SIZE;
> > +               dma_set_residue(txstate, c->rx_ptr);
> > +       } else if (ret == DMA_COMPLETE && c->cfg.direction == DMA_DEV_TO_MEM) {
> > +               dma_set_residue(txstate, c->remain_size);
> > +       } else {
> > +               dma_set_residue(txstate, 0);
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return ret;
> > +}
> > +
> > +static struct dma_async_tx_descriptor *mtk_dma_prep_slave_sg
> > +       (struct dma_chan *chan, struct scatterlist *sgl,
> > +       unsigned int sglen,     enum dma_transfer_direction dir,
> > +       unsigned long tx_flags, void *context)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct scatterlist *sgent;
> > +       struct mtk_dma_desc *d;
> > +       struct mtk_dma_sg *sg;
> > +       unsigned int size, i, j, en;
> > +
> > +       en = 1;
> > +
> > +       if ((dir != DMA_DEV_TO_MEM) &&
> > +               (dir != DMA_MEM_TO_DEV)) {
> > +               dev_err(chan->device->dev, "bad direction\n");
> > +               return NULL;
> > +       }
> > +
> > +       /* Now allocate and setup the descriptor. */
> > +       d = kzalloc(sizeof(*d) + sglen * sizeof(d->sg[0]), GFP_ATOMIC);
> > +       if (!d)
> > +               return NULL;
> > +
> > +       d->dir = dir;
> > +
> > +       j = 0;
> > +       for_each_sg(sgl, sgent, sglen, i) {
> > +               d->sg[j].addr = sg_dma_address(sgent);
> > +               d->sg[j].en = en;
> > +               d->sg[j].fn = sg_dma_len(sgent) / en;
> > +               j++;
> > +       }
> > +
> > +       d->sglen = j;
> > +
> > +       if (dir == DMA_MEM_TO_DEV) {
> > +               for (size = i = 0; i < d->sglen; i++) {
> > +                       sg = &d->sg[i];
> > +                       size += sg->en * sg->fn;
> > +               }
> > +               c->remain_size = size;
> > +       }
> > +
> > +       return vchan_tx_prep(&c->vc, &d->vd, tx_flags);
> > +}
> > +
> > +static void mtk_dma_issue_pending(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct virt_dma_desc *vd;
> > +       struct mtk_dmadev *mtkd;
> > +       dma_cookie_t cookie;
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM) {
> > +               cookie = c->vc.chan.cookie;
> > +               mtkd = to_mtk_dma_dev(chan->device);
> > +               if (vchan_issue_pending(&c->vc) && !c->desc) {
> 
> vchan_issue_pending means putting all the descriptors to list
> desc_issued, I'm supposed somewhere would iterate the list by
> vchan_next_desc and program each desc. into hardware. but I don't see
> the similar code.

ok, i will modify it at next patch

> 
> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +               }
> > +       } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> > +               cookie = c->vc.chan.cookie;
> > +               if (vchan_issue_pending(&c->vc) && !c->desc) {
> 
> ditto as the above
> 

ok, i will modify it at next patch

> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +                       mtk_dma_start_tx(c);
> > +               }
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +}
> > +
> > +static irqreturn_t mtk_dma_rx_interrupt(int irq, void *dev_id)
> > +{
> > +       struct dma_chan *chan = (struct dma_chan *)dev_id;
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +
> > +       mtk_dma_start_rx(c);
> > +
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t mtk_dma_tx_interrupt(int irq, void *dev_id)
> > +{
> > +       struct dma_chan *chan = (struct dma_chan *)dev_id;
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct mtk_dma_desc *d = c->desc;
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (c->remain_size != 0U) {
> > +               list_add_tail(&c->node, &mtkd->pending);
> > +               tasklet_schedule(&mtkd->task);
> > +       } else {
> > +               mtk_dma_remove_virt_list(d->vd.tx.cookie, &c->vc);
> > +               vchan_cookie_complete(&d->vd);
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static int mtk_dma_slave_config(struct dma_chan *chan,
> > +                               struct dma_slave_config *cfg)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(c->vc.chan.device);
> > +       int ret;
> > +
> > +       c->cfg = *cfg;
> > +
> > +       if (cfg->direction == DMA_DEV_TO_MEM) {
> > +               unsigned int rx_len = cfg->src_addr_width * 1024;
> > +
> > +               mtk_dma_chan_write(c, VFF_ADDR, cfg->src_addr);
> > +               mtk_dma_chan_write(c, VFF_LEN, rx_len);
> > +               mtk_dma_chan_write(c, VFF_THRE, VFF_RX_THRE(rx_len));
> > +               mtk_dma_chan_write(c,
> > +                                  VFF_INT_EN, VFF_RX_INT_EN0_B
> > +                                  | VFF_RX_INT_EN1_B);
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +               mtk_dma_chan_write(c, VFF_EN, VFF_EN_B);
> > +
> > +               if (!c->requested) {
> > +                       c->requested = true;
> > +                       ret = request_irq(mtkd->dma_irq[c->dma_ch],
> > +                                         mtk_dma_rx_interrupt,
> > +                                         IRQF_TRIGGER_NONE,
> > +                                         KBUILD_MODNAME, chan);
> > +                       if (ret < 0) {
> > +                               dev_err(chan->device->dev, "Can't request rx dma IRQ\n");
> > +                               return -EINVAL;
> > +                       }
> > +               }
> > +       } else if (cfg->direction == DMA_MEM_TO_DEV)    {
> > +               unsigned int tx_len = cfg->dst_addr_width * 1024;
> > +
> > +               mtk_dma_chan_write(c, VFF_ADDR, cfg->dst_addr);
> > +               mtk_dma_chan_write(c, VFF_LEN, tx_len);
> > +               mtk_dma_chan_write(c, VFF_THRE, VFF_TX_THRE(tx_len));
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +               mtk_dma_chan_write(c, VFF_EN, VFF_EN_B);
> > +
> > +               if (!c->requested) {
> > +                       c->requested = true;
> > +                       ret = request_irq(mtkd->dma_irq[c->dma_ch],
> > +                                         mtk_dma_tx_interrupt,
> > +                                         IRQF_TRIGGER_NONE,
> > +                                         KBUILD_MODNAME, chan);
> > +                       if (ret < 0) {
> > +                               dev_err(chan->device->dev, "Can't request tx dma IRQ\n");
> > +                               return -EINVAL;
> > +                       }
> > +               }
> > +       }
> > +
> > +       if (mtkd->support_33bits)
> > +               mtk_dma_chan_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_B);
> > +
> > +       if (mtk_dma_chan_read(c, VFF_EN) != VFF_EN_B) {
> > +               dev_err(chan->device->dev,
> > +                       "config dma dir[%d] fail\n", cfg->direction);
> > +               return -EINVAL;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_terminate_all(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       list_del_init(&c->node);
> > +       mtk_dma_stop(c);
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_device_pause(struct dma_chan *chan)
> > +{
> > +       /* just for check caps pass */
> > +       return -EINVAL;
> > +}
> 
> it it possible not to register the function to the core if the
> hardware doesn't support it?
> 

can't support. the function will set to cmd_pause. in 8250 serial code,
will check cmd_pause. if no the function, will can't get DMA channel.
So 
the function just for this.

> > +
> > +static int mtk_dma_device_resume(struct dma_chan *chan)
> > +{
> > +       /* just for check caps pass */
> > +       return -EINVAL;
> > +}
> 
> ditto as the above
> 
> > +
> > +static void mtk_dma_free(struct mtk_dmadev *mtkd)
> > +{
> > +       tasklet_kill(&mtkd->task);
> > +       while (list_empty(&mtkd->ddev.channels) == 0) {
> > +               struct mtk_chan *c = list_first_entry(&mtkd->ddev.channels,
> > +                       struct mtk_chan, vc.chan.device_node);
> > +
> > +               list_del(&c->vc.chan.device_node);
> > +               tasklet_kill(&c->vc.task);
> > +               devm_kfree(mtkd->ddev.dev, c);
> > +       }
> > +}
> > +
> > +static const struct of_device_id mtk_uart_dma_match[] = {
> > +       { .compatible = "mediatek,mt6577-uart-dma", },
> > +       { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, mtk_uart_dma_match);
> > +
> > +static int mtk_apdma_probe(struct platform_device *pdev)
> > +{
> > +       struct mtk_dmadev *mtkd;
> > +       struct resource *res;
> > +       struct mtk_chan *c;
> > +       unsigned int i;
> > +       int rc;
> > +
> > +       mtkd = devm_kzalloc(&pdev->dev, sizeof(*mtkd), GFP_KERNEL);
> > +       if (!mtkd)
> > +               return -ENOMEM;
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               res = platform_get_resource(pdev, IORESOURCE_MEM, i);
> > +               if (!res)
> > +                       return -ENODEV;
> > +               mtkd->mem_base[i] = devm_ioremap_resource(&pdev->dev, res);
> > +               if (IS_ERR(mtkd->mem_base[i]))
> > +                       return PTR_ERR(mtkd->mem_base[i]);
> > +       }
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               mtkd->dma_irq[i] = platform_get_irq(pdev, i);
> > +               if ((int)mtkd->dma_irq[i] < 0) {
> > +                       dev_err(&pdev->dev, "failed to get IRQ[%d]\n", i);
> > +                       return -EINVAL;
> > +               }
> > +       }
> > +
> > +       mtkd->clk = devm_clk_get(&pdev->dev, NULL);
> > +       if (IS_ERR(mtkd->clk)) {
> > +               dev_err(&pdev->dev, "No clock specified\n");
> > +               return PTR_ERR(mtkd->clk);
> > +       }
> > +
> > +       if (of_property_read_bool(pdev->dev.of_node, "dma-33bits")) {
> > +               dev_info(&pdev->dev, "Support dma 33bits\n");
> > +               mtkd->support_33bits = true;
> > +       }
> > +
> > +       if (mtkd->support_33bits)
> > +               rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(33));
> > +       else
> > +               rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> > +       if (rc)
> > +               return rc;
> > +
> > +       dma_cap_set(DMA_SLAVE, mtkd->ddev.cap_mask);
> > +       mtkd->ddev.device_alloc_chan_resources = mtk_dma_alloc_chan_resources;
> > +       mtkd->ddev.device_free_chan_resources = mtk_dma_free_chan_resources;
> > +       mtkd->ddev.device_tx_status = mtk_dma_tx_status;
> > +       mtkd->ddev.device_issue_pending = mtk_dma_issue_pending;
> > +       mtkd->ddev.device_prep_slave_sg = mtk_dma_prep_slave_sg;
> > +       mtkd->ddev.device_config = mtk_dma_slave_config;
> > +       mtkd->ddev.device_pause = mtk_dma_device_pause;
> > +       mtkd->ddev.device_resume = mtk_dma_device_resume;
> > +       mtkd->ddev.device_terminate_all = mtk_dma_terminate_all;
> > +       mtkd->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> > +       mtkd->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> > +       mtkd->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
> > +       mtkd->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
> > +       mtkd->ddev.dev = &pdev->dev;
> > +       INIT_LIST_HEAD(&mtkd->ddev.channels);
> > +       INIT_LIST_HEAD(&mtkd->pending);
> > +
> > +       spin_lock_init(&mtkd->lock);
> > +       tasklet_init(&mtkd->task, mtk_dma_sched, (unsigned long)mtkd);
> > +
> > +       mtkd->dma_requests = MTK_APDMA_DEFAULT_REQUESTS;
> > +       if (of_property_read_u32(pdev->dev.of_node,
> > +                                "dma-requests", &mtkd->dma_requests)) {
> > +               dev_info(&pdev->dev,
> > +                        "Missing dma-requests property, using %u.\n",
> > +                        MTK_APDMA_DEFAULT_REQUESTS);
> > +       }
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               c = devm_kzalloc(mtkd->ddev.dev, sizeof(*c), GFP_KERNEL);
> > +               if (!c)
> > +                       goto err_no_dma;
> > +
> > +               c->vc.desc_free = mtk_dma_desc_free;
> > +               vchan_init(&c->vc, &mtkd->ddev);
> > +               INIT_LIST_HEAD(&c->node);
> > +       }
> > +
> > +       pm_runtime_enable(&pdev->dev);
> > +       pm_runtime_set_active(&pdev->dev);
> > +
> > +       rc = dma_async_device_register(&mtkd->ddev);
> > +       if (rc)
> > +               goto rpm_disable;
> > +
> > +       platform_set_drvdata(pdev, mtkd);
> > +
> > +       if (pdev->dev.of_node) {
> > +               mtk_dma_info.dma_cap = mtkd->ddev.cap_mask;
> > +
> > +               /* Device-tree DMA controller registration */
> > +               rc = of_dma_controller_register(pdev->dev.of_node,
> > +                                               of_dma_simple_xlate,
> > +                                               &mtk_dma_info);
> 
> reusing of_dma_xlate_by_chan_id seem that also work for you.

in filter_fn function, neeg get number of dma.
> 
> > +               if (rc)
> > +                       goto dma_remove;
> > +       }
> > +
> > +       return rc;
> > +
> > +dma_remove:
> > +       dma_async_device_unregister(&mtkd->ddev);
> > +rpm_disable:
> > +       pm_runtime_disable(&pdev->dev);
> > +err_no_dma:
> > +       mtk_dma_free(mtkd);
> > +       return rc;
> > +}
> > +
> > +static int mtk_apdma_remove(struct platform_device *pdev)
> > +{
> > +       struct mtk_dmadev *mtkd = platform_get_drvdata(pdev);
> > +
> > +       if (pdev->dev.of_node)
> > +               of_dma_controller_free(pdev->dev.of_node);
> > +
> > +       pm_runtime_disable(&pdev->dev);
> > +       pm_runtime_put_noidle(&pdev->dev);
> > +
> > +       dma_async_device_unregister(&mtkd->ddev);
> > +
> > +       mtk_dma_free(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int mtk_dma_suspend(struct device *dev)
> > +{
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       if (!pm_runtime_suspended(dev))
> > +               mtk_dma_clk_disable(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_resume(struct device *dev)
> > +{
> > +       int ret;
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       if (!pm_runtime_suspended(dev)) {
> > +               ret = mtk_dma_clk_enable(mtkd);
> > +               if (ret)
> > +                       return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_runtime_suspend(struct device *dev)
> > +{
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       mtk_dma_clk_disable(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_runtime_resume(struct device *dev)
> > +{
> > +       int ret;
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       ret = mtk_dma_clk_enable(mtkd);
> > +       if (ret)
> > +               return ret;
> > +
> > +       return 0;
> > +}
> > +
> > +#endif /* CONFIG_PM_SLEEP */
> > +
> > +static const struct dev_pm_ops mtk_dma_pm_ops = {
> > +       SET_SYSTEM_SLEEP_PM_OPS(mtk_dma_suspend, mtk_dma_resume)
> > +       SET_RUNTIME_PM_OPS(mtk_dma_runtime_suspend,
> > +                          mtk_dma_runtime_resume, NULL)
> > +};
> > +
> > +static struct platform_driver mtk_dma_driver = {
> > +       .probe  = mtk_apdma_probe,
> > +       .remove = mtk_apdma_remove,
> > +       .driver = {
> > +               .name           = KBUILD_MODNAME,
> > +               .pm             = &mtk_dma_pm_ops,
> > +               .of_match_table = of_match_ptr(mtk_uart_dma_match),
> > +       },
> > +};
> > +
> > +static bool mtk_dma_filter_fn(struct dma_chan *chan, void *param)
> > +{
> > +       if (chan->device->dev->driver == &mtk_dma_driver.driver) {
> > +               struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +               struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +               unsigned int req = *(unsigned int *)param;
> > +
> > +               if (req <= mtkd->dma_requests) {
> > +                       c->dma_sig = req;
> > +                       c->dma_ch = req;
> > +                       return true;
> > +               }
> > +       }
> > +       return false;
> > +}
> > +
> > +module_platform_driver(mtk_dma_driver);
> > +
> > +MODULE_DESCRIPTION("MediaTek UART APDMA Controller Driver");
> > +MODULE_AUTHOR("Long Cheng <long.cheng@mediatek.com>");
> > +MODULE_LICENSE("GPL v2");
> > +
> > diff --git a/drivers/dma/mediatek/Kconfig b/drivers/dma/mediatek/Kconfig
> > index 27bac0b..bef436e 100644
> > --- a/drivers/dma/mediatek/Kconfig
> > +++ b/drivers/dma/mediatek/Kconfig
> > @@ -1,4 +1,15 @@
> >
> > +config DMA_MTK_UART
> > +       tristate "MediaTek SoCs APDMA support for UART"
> > +       depends on OF
> > +       select DMA_ENGINE
> > +       select DMA_VIRTUAL_CHANNELS
> > +       help
> > +         Support for the UART DMA engine found on MediaTek MTK SoCs.
> > +         when 8250 mtk uart is enabled, and if you want to using DMA,
> > +         you can enable the config. the DMA engine just only be used
> > +         with MediaTek Socs.
> > +
> >  config MTK_HSDMA
> >         tristate "MediaTek High-Speed DMA controller support"
> >         depends on ARCH_MEDIATEK || COMPILE_TEST
> > diff --git a/drivers/dma/mediatek/Makefile b/drivers/dma/mediatek/Makefile
> > index 6e778f8..2f2efd9 100644
> > --- a/drivers/dma/mediatek/Makefile
> > +++ b/drivers/dma/mediatek/Makefile
> > @@ -1 +1,2 @@
> > +obj-$(CONFIG_DMA_MTK_UART) += 8250_mtk_dma.o
> >  obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
> > --
> > 1.7.9.5
> >
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Long Cheng <long.cheng@mediatek.com>
To: Sean Wang <sean.wang@kernel.org>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	yt.shen@mediatek.com, srv_heupstream@mediatek.com,
	gregkh@linuxfoundation.org,
	"Sean Wang (王志亘)" <sean.wang@mediatek.com>,
	linux-kernel@vger.kernel.org,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	vkoul@kernel.org, robh+dt@kernel.org,
	linux-mediatek@lists.infradead.org, linux-serial@vger.kernel.org,
	jslaby@suse.com, dmaengine@vger.kernel.org,
	yingjoe.chen@mediatek.com, dan.j.williams@intel.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
Date: Thu, 6 Dec 2018 17:55:40 +0800	[thread overview]
Message-ID: <1544090140.28871.11.camel@mhfsdcap03> (raw)
In-Reply-To: <CAGp9LzqkOHPqVmAOR+YRotOb511BEDOpUWHc-YSjphF3Gpar=w@mail.gmail.com>

On Wed, 2018-12-05 at 13:07 -0800, Sean Wang wrote:
> .
> On Wed, Dec 5, 2018 at 1:31 AM Long Cheng <long.cheng@mediatek.com> wrote:
> >
> > In DMA engine framework, add 8250 mtk dma to support it.
> >
> > Signed-off-by: Long Cheng <long.cheng@mediatek.com>
> > ---
> >  drivers/dma/mediatek/8250_mtk_dma.c |  894 +++++++++++++++++++++++++++++++++++
> >  drivers/dma/mediatek/Kconfig        |   11 +
> >  drivers/dma/mediatek/Makefile       |    1 +
> >  3 files changed, 906 insertions(+)
> >  create mode 100644 drivers/dma/mediatek/8250_mtk_dma.c
> >
> > diff --git a/drivers/dma/mediatek/8250_mtk_dma.c b/drivers/dma/mediatek/8250_mtk_dma.c
> > new file mode 100644
> > index 0000000..3454679
> > --- /dev/null
> > +++ b/drivers/dma/mediatek/8250_mtk_dma.c
> > @@ -0,0 +1,894 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Mediatek 8250 DMA driver.
> > + *
> > + * Copyright (c) 2018 MediaTek Inc.
> > + * Author: Long Cheng <long.cheng@mediatek.com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/dmaengine.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/list.h>
> > +#include <linux/module.h>
> > +#include <linux/of_dma.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/iopoll.h>
> > +
> > +#include "../virt-dma.h"
> > +
> > +#define MTK_APDMA_DEFAULT_REQUESTS     127
> > +#define MTK_APDMA_CHANNELS             (CONFIG_SERIAL_8250_NR_UARTS * 2)
> > +
> > +#define VFF_EN_B               BIT(0)
> > +#define VFF_STOP_B             BIT(0)
> > +#define VFF_FLUSH_B            BIT(0)
> > +#define VFF_4G_SUPPORT_B       BIT(0)
> > +#define VFF_RX_INT_EN0_B       BIT(0)  /*rx valid size >=  vff thre*/
> > +#define VFF_RX_INT_EN1_B       BIT(1)
> > +#define VFF_TX_INT_EN_B                BIT(0)  /*tx left size >= vff thre*/
> > +#define VFF_WARM_RST_B         BIT(0)
> > +#define VFF_RX_INT_FLAG_CLR_B  (BIT(0) | BIT(1))
> > +#define VFF_TX_INT_FLAG_CLR_B  0
> > +#define VFF_STOP_CLR_B         0
> > +#define VFF_FLUSH_CLR_B                0
> > +#define VFF_INT_EN_CLR_B       0
> > +#define VFF_4G_SUPPORT_CLR_B   0
> > +
> > +/* interrupt trigger level for tx */
> > +#define VFF_TX_THRE(n)         ((n) * 7 / 8)
> > +/* interrupt trigger level for rx */
> > +#define VFF_RX_THRE(n)         ((n) * 3 / 4)
> > +
> > +#define MTK_DMA_RING_SIZE      0xffffU
> > +/* invert this bit when wrap ring head again*/
> > +#define MTK_DMA_RING_WRAP      0x10000U
> > +
> > +#define VFF_INT_FLAG           0x00
> > +#define VFF_INT_EN             0x04
> > +#define VFF_EN                 0x08
> > +#define VFF_RST                        0x0c
> > +#define VFF_STOP               0x10
> > +#define VFF_FLUSH              0x14
> > +#define VFF_ADDR               0x1c
> > +#define VFF_LEN                        0x24
> > +#define VFF_THRE               0x28
> > +#define VFF_WPT                        0x2c
> > +#define VFF_RPT                        0x30
> > +/*TX: the buffer size HW can read. RX: the buffer size SW can read.*/
> > +#define VFF_VALID_SIZE         0x3c
> > +/*TX: the buffer size SW can write. RX: the buffer size HW can write.*/
> > +#define VFF_LEFT_SIZE          0x40
> > +#define VFF_DEBUG_STATUS       0x50
> > +#define VFF_4G_SUPPORT         0x54
> > +
> > +struct mtk_dmadev {
> > +       struct dma_device ddev;
> > +       void __iomem *mem_base[MTK_APDMA_CHANNELS];
> > +       spinlock_t lock; /* dma dev lock */
> > +       struct tasklet_struct task;
> > +       struct list_head pending;
> > +       struct clk *clk;
> > +       unsigned int dma_requests;
> > +       bool support_33bits;
> > +       unsigned int dma_irq[MTK_APDMA_CHANNELS];
> > +       struct mtk_chan *ch[MTK_APDMA_CHANNELS];
> > +};
> > +
> > +struct mtk_chan {
> > +       struct virt_dma_chan vc;
> > +       struct list_head node;
> > +       struct dma_slave_config cfg;
> > +       void __iomem *base;
> > +       struct mtk_dma_desc *desc;
> > +
> > +       bool stop;
> > +       bool requested;
> > +
> > +       unsigned int dma_sig;
> 
> the member can be removed as no real user would refer to it
> 

Ok, i will remove it at next patch

> > +       unsigned int dma_ch;
> 
> a chan_id is already included in struct dma_chan, we can reuse it
> 

chan_id is start from 0. but in this driver, dma info is stored to list.
if use port1, in filter_fn function, will set dma_ch to 2, 3(tx, rx). So
can't using chan_id

> > +       unsigned int sgidx;
> 
> the member also can be removed as no real user would refer to it
> 

Ok, i will remove it at next patch

> > +       unsigned int remain_size;
> 
> The member remain_size seems unnecessary data to maintain a channel.
> The virtual channel struct virt_dma_chan already provide the way to
> manage all descriptors you're operating on, you should reuse related
> functions to virt_dma_chan first.
> 
> Or if you mean remain_size is about the remaining size of current
> descriptor, and then putting into struct mtk_dma_desc would be better.
> 

i will move it to mtk_dma_desc

> > +       unsigned int rx_ptr;
> > +};
> > +
> > +struct mtk_dma_sg {
> > +       dma_addr_t addr;
> > +       unsigned int en;                /* number of elements (24-bit) */
> > +       unsigned int fn;                /* number of frames (16-bit) */
> > +};
> > +
> > +struct mtk_dma_desc {
> > +       struct virt_dma_desc vd;
> > +       enum dma_transfer_direction dir;
> > +
> > +       unsigned int sglen;
> > +       struct mtk_dma_sg sg[0];
> > +};
> > +
> > +static bool mtk_dma_filter_fn(struct dma_chan *chan, void *param);
> > +static struct of_dma_filter_info mtk_dma_info = {
> > +       .filter_fn = mtk_dma_filter_fn,
> > +};
> > +
> > +static inline struct mtk_dmadev *to_mtk_dma_dev(struct dma_device *d)
> > +{
> > +       return container_of(d, struct mtk_dmadev, ddev);
> > +}
> > +
> > +static inline struct mtk_chan *to_mtk_dma_chan(struct dma_chan *c)
> > +{
> > +       return container_of(c, struct mtk_chan, vc.chan);
> > +}
> > +
> > +static inline struct mtk_dma_desc *to_mtk_dma_desc
> > +       (struct dma_async_tx_descriptor *t)
> > +{
> > +       return container_of(t, struct mtk_dma_desc, vd.tx);
> > +}
> > +
> > +static void mtk_dma_chan_write(struct mtk_chan *c,
> > +                              unsigned int reg, unsigned int val)
> > +{
> > +       writel(val, c->base + reg);
> > +}
> > +
> > +static unsigned int mtk_dma_chan_read(struct mtk_chan *c, unsigned int reg)
> > +{
> > +       return readl(c->base + reg);
> > +}
> > +
> > +static void mtk_dma_desc_free(struct virt_dma_desc *vd)
> > +{
> > +       struct dma_chan *chan = vd->tx.chan;
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       kfree(c->desc);
> > +       c->desc = NULL;
> > +}
> > +
> > +static int mtk_dma_clk_enable(struct mtk_dmadev *mtkd)
> > +{
> > +       int ret;
> > +
> > +       ret = clk_prepare_enable(mtkd->clk);
> > +       if (ret) {
> > +               dev_err(mtkd->ddev.dev, "Couldn't enable the clock\n");
> > +               return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static void mtk_dma_clk_disable(struct mtk_dmadev *mtkd)
> > +{
> > +       clk_disable_unprepare(mtkd->clk);
> > +}
> > +
> > +static void mtk_dma_remove_virt_list(dma_cookie_t cookie,
> > +                                    struct virt_dma_chan *vc)
> > +{
> > +       struct virt_dma_desc *vd;
> > +
> > +       if (list_empty(&vc->desc_issued) == 0) {
> > +               list_for_each_entry(vd, &vc->desc_issued, node) {
> > +                       if (cookie == vd->tx.cookie) {
> > +                               INIT_LIST_HEAD(&vc->desc_issued);
> 
> generally, we don't force initialze the list desc_issued. Instead,
> when each descriptor is completed, we need to move each descriptor
> from the list desc_issued to the list desc_completed.
> 

ok, i will modify it at next patch

> > +                               break;
> > +                       }
> > +               }
> > +       }
> > +}
> > +
> > +static void mtk_dma_tx_flush(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       if (mtk_dma_chan_read(c, VFF_FLUSH) == 0U)
> > +               mtk_dma_chan_write(c, VFF_FLUSH, VFF_FLUSH_B);
> > +}
> > +
> > +static void mtk_dma_tx_write(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned int txcount = c->remain_size;
> > +       unsigned int len, send, left, wpt, wrap;
> > +
> > +       len = mtk_dma_chan_read(c, VFF_LEN);
> > +
> > +       while ((left = mtk_dma_chan_read(c, VFF_LEFT_SIZE)) > 0U) {
> > +               if (c->remain_size == 0U)
> > +                       break;
> > +               send = min(left, c->remain_size);
> 
> min_t
> 

ok, i will modify it at next patch

> > +               wpt = mtk_dma_chan_read(c, VFF_WPT);
> > +               wrap = wpt & MTK_DMA_RING_WRAP ? 0U : MTK_DMA_RING_WRAP;
> > +
> > +               if ((wpt & (len - 1U)) + send < len)
> > +                       mtk_dma_chan_write(c, VFF_WPT, wpt + send);
> > +               else
> > +                       mtk_dma_chan_write(c, VFF_WPT,
> > +                                          ((wpt + send) & (len - 1U))
> > +                                          | wrap);
> > +
> > +               c->remain_size -= send;
> 
> I'm curious why you don't need to set up the hardware from the
> descriptor information
> 

mtk_dma_chan_write is update the hardware. remain_size is length of TX
data.

> > +       }
> > +
> > +       if (txcount != c->remain_size) {
> > +               mtk_dma_chan_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> > +               mtk_dma_tx_flush(chan);
> > +       }
> > +}
> > +
> > +static void mtk_dma_start_tx(struct mtk_chan *c)
> > +{
> > +       if (mtk_dma_chan_read(c, VFF_LEFT_SIZE) == 0U)
> > +               mtk_dma_chan_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> > +       else
> > +               mtk_dma_tx_write(&c->vc.chan);
> > +
> > +       c->stop = false;
> > +}
> > +
> > +static void mtk_dma_get_rx_size(struct mtk_chan *c)
> > +{
> > +       unsigned int rx_size = mtk_dma_chan_read(c, VFF_LEN);
> > +       unsigned int rdptr, wrptr, wrreg, rdreg, count;
> > +
> > +       rdreg = mtk_dma_chan_read(c, VFF_RPT);
> > +       wrreg = mtk_dma_chan_read(c, VFF_WPT);
> > +       rdptr = rdreg & MTK_DMA_RING_SIZE;
> > +       wrptr = wrreg & MTK_DMA_RING_SIZE;
> > +       count = ((rdreg ^ wrreg) & MTK_DMA_RING_WRAP) ?
> > +                       (wrptr + rx_size - rdptr) : (wrptr - rdptr);
> > +
> > +       c->remain_size = count;
> > +       c->rx_ptr = rdptr;
> > +
> > +       mtk_dma_chan_write(c, VFF_RPT, wrreg);
> > +}
> > +
> > +static void mtk_dma_start_rx(struct mtk_chan *c)
> > +{
> > +       struct dma_chan *chan = &c->vc.chan;
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_dma_desc *d = c->desc;
> > +
> > +       if (mtk_dma_chan_read(c, VFF_VALID_SIZE) == 0U)
> > +               return;
> > +
> > +       if (d && d->vd.tx.cookie != 0) {
> 
> the driver benefits from virtual_channel so you can manage the life
> cycle of each descriptor by the virtual channel related functions
> without handling details about the cookie.
> 

ok, i will modify it at next patch

> > +               mtk_dma_get_rx_size(c);
> > +               mtk_dma_remove_virt_list(d->vd.tx.cookie, &c->vc);
> > +               vchan_cookie_complete(&d->vd);
> > +       } else {
> > +               spin_lock(&mtkd->lock);
> > +               if (list_empty(&mtkd->pending))
> > +                       list_add_tail(&c->node, &mtkd->pending);
> > +               spin_unlock(&mtkd->lock);
> > +               tasklet_schedule(&mtkd->task);
> > +       }
> > +}
> > +
> > +static void mtk_dma_reset(struct mtk_chan *c)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(c->vc.chan.device);
> > +       u32 status;
> > +       int ret;
> > +
> > +       mtk_dma_chan_write(c, VFF_ADDR, 0);
> > +       mtk_dma_chan_write(c, VFF_THRE, 0);
> > +       mtk_dma_chan_write(c, VFF_LEN, 0);
> > +       mtk_dma_chan_write(c, VFF_RST, VFF_WARM_RST_B);
> > +
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_EN,
> > +                                status, status == 0, 10, 100);
> > +       if (ret) {
> > +               dev_err(c->vc.chan.device->dev,
> > +                               "dma reset: fail, timeout\n");
> > +               return;
> > +       }
> > +
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM)
> > +               mtk_dma_chan_write(c, VFF_RPT, 0);
> > +       else if (c->cfg.direction == DMA_MEM_TO_DEV)
> > +               mtk_dma_chan_write(c, VFF_WPT, 0);
> > +
> > +       if (mtkd->support_33bits)
> > +               mtk_dma_chan_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_CLR_B);
> > +}
> > +
> > +static void mtk_dma_stop(struct mtk_chan *c)
> > +{
> > +       u32 status;
> > +       int ret;
> > +
> > +       mtk_dma_chan_write(c, VFF_FLUSH, VFF_FLUSH_CLR_B);
> > +       /* Wait for flush */
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_FLUSH,
> > +                                status,
> > +                                (status & VFF_FLUSH_B) != VFF_FLUSH_B,
> > +                                10, 100);
> > +       if (ret)
> > +               dev_err(c->vc.chan.device->dev,
> > +                       "dma stop: polling FLUSH fail, DEBUG=0x%x\n",
> > +                       mtk_dma_chan_read(c, VFF_DEBUG_STATUS));
> > +
> > +       /*set stop as 1 -> wait until en is 0 -> set stop as 0*/
> > +       mtk_dma_chan_write(c, VFF_STOP, VFF_STOP_B);
> > +       ret = readx_poll_timeout(readl,
> > +                                c->base + VFF_EN,
> > +                                status, status == 0, 10, 100);
> > +       if (ret)
> > +               dev_err(c->vc.chan.device->dev,
> > +                       "dma stop: polling VFF_EN fail, DEBUG=0x%x\n",
> > +                       mtk_dma_chan_read(c, VFF_DEBUG_STATUS));
> > +
> > +       mtk_dma_chan_write(c, VFF_STOP, VFF_STOP_CLR_B);
> > +       mtk_dma_chan_write(c, VFF_INT_EN, VFF_INT_EN_CLR_B);
> > +
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM)
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +       else
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +
> > +       c->stop = true;
> > +}
> > +
> > +/*
> > + * This callback schedules all pending channels. We could be more
> > + * clever here by postponing allocation of the real DMA channels to
> > + * this point, and freeing them when our virtual channel becomes idle.
> > + *
> > + * We would then need to deal with 'all channels in-use'
> > + */
> > +static void mtk_dma_sched(unsigned long data)
> > +{
> > +       struct mtk_dmadev *mtkd = (struct mtk_dmadev *)data;
> > +       struct virt_dma_desc *vd;
> > +       struct mtk_chan *c;
> > +       dma_cookie_t cookie;
> > +       unsigned long flags;
> > +       LIST_HEAD(head);
> > +
> > +       spin_lock_irq(&mtkd->lock);
> > +       list_splice_tail_init(&mtkd->pending, &head);
> > +       spin_unlock_irq(&mtkd->lock);
> > +
> > +       if (!list_empty(&head)) {
> > +               c = list_first_entry(&head, struct mtk_chan, node);
> > +               cookie = c->vc.chan.cookie;
> > +
> > +               spin_lock_irqsave(&c->vc.lock, flags);
> > +               if (c->cfg.direction == DMA_DEV_TO_MEM) {
> > +                       list_del_init(&c->node);
> > +                       mtk_dma_start_rx(c);
> > +               } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +                       list_del_init(&c->node);
> > +                       mtk_dma_start_tx(c);
> > +               }
> > +               spin_unlock_irqrestore(&c->vc.lock, flags);
> > +       }
> > +}
> > +
> > +static int mtk_dma_alloc_chan_resources(struct dma_chan *chan)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       int ret = -EBUSY;
> > +
> > +       pm_runtime_get_sync(mtkd->ddev.dev);
> > +
> > +       if (!mtkd->ch[c->dma_ch]) {
> > +               c->base = mtkd->mem_base[c->dma_ch];
> > +               mtkd->ch[c->dma_ch] = c;
> > +               ret = 1;
> > +       }
> > +       c->requested = false;
> > +       mtk_dma_reset(c);
> > +
> > +       return ret;
> > +}
> > +
> > +static void mtk_dma_free_chan_resources(struct dma_chan *chan)
> > +{
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +
> > +       if (c->requested) {
> > +               c->requested = false;
> > +               free_irq(mtkd->dma_irq[c->dma_ch], chan);
> > +       }
> > +
> > +       tasklet_kill(&mtkd->task);
> > +       tasklet_kill(&c->vc.task);
> > +
> > +       c->base = NULL;
> > +       mtkd->ch[c->dma_ch] = NULL;
> > +       vchan_free_chan_resources(&c->vc);
> > +
> > +       dev_dbg(mtkd->ddev.dev, "freeing channel for %u\n", c->dma_sig);
> > +       c->dma_sig = 0;
> > +
> > +       pm_runtime_put_sync(mtkd->ddev.dev);
> > +}
> > +
> > +static enum dma_status mtk_dma_tx_status(struct dma_chan *chan,
> > +                                        dma_cookie_t cookie,
> > +                                        struct dma_tx_state *txstate)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       enum dma_status ret;
> > +       unsigned long flags;
> > +
> > +       if (!txstate)
> > +               return DMA_ERROR;
> > +
> > +       ret = dma_cookie_status(chan, cookie, txstate);
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (ret == DMA_IN_PROGRESS) {
> > +               c->rx_ptr = mtk_dma_chan_read(c, VFF_RPT) & MTK_DMA_RING_SIZE;
> > +               dma_set_residue(txstate, c->rx_ptr);
> > +       } else if (ret == DMA_COMPLETE && c->cfg.direction == DMA_DEV_TO_MEM) {
> > +               dma_set_residue(txstate, c->remain_size);
> > +       } else {
> > +               dma_set_residue(txstate, 0);
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return ret;
> > +}
> > +
> > +static struct dma_async_tx_descriptor *mtk_dma_prep_slave_sg
> > +       (struct dma_chan *chan, struct scatterlist *sgl,
> > +       unsigned int sglen,     enum dma_transfer_direction dir,
> > +       unsigned long tx_flags, void *context)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct scatterlist *sgent;
> > +       struct mtk_dma_desc *d;
> > +       struct mtk_dma_sg *sg;
> > +       unsigned int size, i, j, en;
> > +
> > +       en = 1;
> > +
> > +       if ((dir != DMA_DEV_TO_MEM) &&
> > +               (dir != DMA_MEM_TO_DEV)) {
> > +               dev_err(chan->device->dev, "bad direction\n");
> > +               return NULL;
> > +       }
> > +
> > +       /* Now allocate and setup the descriptor. */
> > +       d = kzalloc(sizeof(*d) + sglen * sizeof(d->sg[0]), GFP_ATOMIC);
> > +       if (!d)
> > +               return NULL;
> > +
> > +       d->dir = dir;
> > +
> > +       j = 0;
> > +       for_each_sg(sgl, sgent, sglen, i) {
> > +               d->sg[j].addr = sg_dma_address(sgent);
> > +               d->sg[j].en = en;
> > +               d->sg[j].fn = sg_dma_len(sgent) / en;
> > +               j++;
> > +       }
> > +
> > +       d->sglen = j;
> > +
> > +       if (dir == DMA_MEM_TO_DEV) {
> > +               for (size = i = 0; i < d->sglen; i++) {
> > +                       sg = &d->sg[i];
> > +                       size += sg->en * sg->fn;
> > +               }
> > +               c->remain_size = size;
> > +       }
> > +
> > +       return vchan_tx_prep(&c->vc, &d->vd, tx_flags);
> > +}
> > +
> > +static void mtk_dma_issue_pending(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct virt_dma_desc *vd;
> > +       struct mtk_dmadev *mtkd;
> > +       dma_cookie_t cookie;
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (c->cfg.direction == DMA_DEV_TO_MEM) {
> > +               cookie = c->vc.chan.cookie;
> > +               mtkd = to_mtk_dma_dev(chan->device);
> > +               if (vchan_issue_pending(&c->vc) && !c->desc) {
> 
> vchan_issue_pending means putting all the descriptors to list
> desc_issued, I'm supposed somewhere would iterate the list by
> vchan_next_desc and program each desc. into hardware. but I don't see
> the similar code.

ok, i will modify it at next patch

> 
> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +               }
> > +       } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> > +               cookie = c->vc.chan.cookie;
> > +               if (vchan_issue_pending(&c->vc) && !c->desc) {
> 
> ditto as the above
> 

ok, i will modify it at next patch

> > +                       vd = vchan_find_desc(&c->vc, cookie);
> > +                       c->desc = to_mtk_dma_desc(&vd->tx);
> > +                       mtk_dma_start_tx(c);
> > +               }
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +}
> > +
> > +static irqreturn_t mtk_dma_rx_interrupt(int irq, void *dev_id)
> > +{
> > +       struct dma_chan *chan = (struct dma_chan *)dev_id;
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +
> > +       mtk_dma_start_rx(c);
> > +
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t mtk_dma_tx_interrupt(int irq, void *dev_id)
> > +{
> > +       struct dma_chan *chan = (struct dma_chan *)dev_id;
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct mtk_dma_desc *d = c->desc;
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       if (c->remain_size != 0U) {
> > +               list_add_tail(&c->node, &mtkd->pending);
> > +               tasklet_schedule(&mtkd->task);
> > +       } else {
> > +               mtk_dma_remove_virt_list(d->vd.tx.cookie, &c->vc);
> > +               vchan_cookie_complete(&d->vd);
> > +       }
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static int mtk_dma_slave_config(struct dma_chan *chan,
> > +                               struct dma_slave_config *cfg)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       struct mtk_dmadev *mtkd = to_mtk_dma_dev(c->vc.chan.device);
> > +       int ret;
> > +
> > +       c->cfg = *cfg;
> > +
> > +       if (cfg->direction == DMA_DEV_TO_MEM) {
> > +               unsigned int rx_len = cfg->src_addr_width * 1024;
> > +
> > +               mtk_dma_chan_write(c, VFF_ADDR, cfg->src_addr);
> > +               mtk_dma_chan_write(c, VFF_LEN, rx_len);
> > +               mtk_dma_chan_write(c, VFF_THRE, VFF_RX_THRE(rx_len));
> > +               mtk_dma_chan_write(c,
> > +                                  VFF_INT_EN, VFF_RX_INT_EN0_B
> > +                                  | VFF_RX_INT_EN1_B);
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> > +               mtk_dma_chan_write(c, VFF_EN, VFF_EN_B);
> > +
> > +               if (!c->requested) {
> > +                       c->requested = true;
> > +                       ret = request_irq(mtkd->dma_irq[c->dma_ch],
> > +                                         mtk_dma_rx_interrupt,
> > +                                         IRQF_TRIGGER_NONE,
> > +                                         KBUILD_MODNAME, chan);
> > +                       if (ret < 0) {
> > +                               dev_err(chan->device->dev, "Can't request rx dma IRQ\n");
> > +                               return -EINVAL;
> > +                       }
> > +               }
> > +       } else if (cfg->direction == DMA_MEM_TO_DEV)    {
> > +               unsigned int tx_len = cfg->dst_addr_width * 1024;
> > +
> > +               mtk_dma_chan_write(c, VFF_ADDR, cfg->dst_addr);
> > +               mtk_dma_chan_write(c, VFF_LEN, tx_len);
> > +               mtk_dma_chan_write(c, VFF_THRE, VFF_TX_THRE(tx_len));
> > +               mtk_dma_chan_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> > +               mtk_dma_chan_write(c, VFF_EN, VFF_EN_B);
> > +
> > +               if (!c->requested) {
> > +                       c->requested = true;
> > +                       ret = request_irq(mtkd->dma_irq[c->dma_ch],
> > +                                         mtk_dma_tx_interrupt,
> > +                                         IRQF_TRIGGER_NONE,
> > +                                         KBUILD_MODNAME, chan);
> > +                       if (ret < 0) {
> > +                               dev_err(chan->device->dev, "Can't request tx dma IRQ\n");
> > +                               return -EINVAL;
> > +                       }
> > +               }
> > +       }
> > +
> > +       if (mtkd->support_33bits)
> > +               mtk_dma_chan_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_B);
> > +
> > +       if (mtk_dma_chan_read(c, VFF_EN) != VFF_EN_B) {
> > +               dev_err(chan->device->dev,
> > +                       "config dma dir[%d] fail\n", cfg->direction);
> > +               return -EINVAL;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_terminate_all(struct dma_chan *chan)
> > +{
> > +       struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&c->vc.lock, flags);
> > +       list_del_init(&c->node);
> > +       mtk_dma_stop(c);
> > +       spin_unlock_irqrestore(&c->vc.lock, flags);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_device_pause(struct dma_chan *chan)
> > +{
> > +       /* just for check caps pass */
> > +       return -EINVAL;
> > +}
> 
> it it possible not to register the function to the core if the
> hardware doesn't support it?
> 

can't support. the function will set to cmd_pause. in 8250 serial code,
will check cmd_pause. if no the function, will can't get DMA channel.
So 
the function just for this.

> > +
> > +static int mtk_dma_device_resume(struct dma_chan *chan)
> > +{
> > +       /* just for check caps pass */
> > +       return -EINVAL;
> > +}
> 
> ditto as the above
> 
> > +
> > +static void mtk_dma_free(struct mtk_dmadev *mtkd)
> > +{
> > +       tasklet_kill(&mtkd->task);
> > +       while (list_empty(&mtkd->ddev.channels) == 0) {
> > +               struct mtk_chan *c = list_first_entry(&mtkd->ddev.channels,
> > +                       struct mtk_chan, vc.chan.device_node);
> > +
> > +               list_del(&c->vc.chan.device_node);
> > +               tasklet_kill(&c->vc.task);
> > +               devm_kfree(mtkd->ddev.dev, c);
> > +       }
> > +}
> > +
> > +static const struct of_device_id mtk_uart_dma_match[] = {
> > +       { .compatible = "mediatek,mt6577-uart-dma", },
> > +       { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, mtk_uart_dma_match);
> > +
> > +static int mtk_apdma_probe(struct platform_device *pdev)
> > +{
> > +       struct mtk_dmadev *mtkd;
> > +       struct resource *res;
> > +       struct mtk_chan *c;
> > +       unsigned int i;
> > +       int rc;
> > +
> > +       mtkd = devm_kzalloc(&pdev->dev, sizeof(*mtkd), GFP_KERNEL);
> > +       if (!mtkd)
> > +               return -ENOMEM;
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               res = platform_get_resource(pdev, IORESOURCE_MEM, i);
> > +               if (!res)
> > +                       return -ENODEV;
> > +               mtkd->mem_base[i] = devm_ioremap_resource(&pdev->dev, res);
> > +               if (IS_ERR(mtkd->mem_base[i]))
> > +                       return PTR_ERR(mtkd->mem_base[i]);
> > +       }
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               mtkd->dma_irq[i] = platform_get_irq(pdev, i);
> > +               if ((int)mtkd->dma_irq[i] < 0) {
> > +                       dev_err(&pdev->dev, "failed to get IRQ[%d]\n", i);
> > +                       return -EINVAL;
> > +               }
> > +       }
> > +
> > +       mtkd->clk = devm_clk_get(&pdev->dev, NULL);
> > +       if (IS_ERR(mtkd->clk)) {
> > +               dev_err(&pdev->dev, "No clock specified\n");
> > +               return PTR_ERR(mtkd->clk);
> > +       }
> > +
> > +       if (of_property_read_bool(pdev->dev.of_node, "dma-33bits")) {
> > +               dev_info(&pdev->dev, "Support dma 33bits\n");
> > +               mtkd->support_33bits = true;
> > +       }
> > +
> > +       if (mtkd->support_33bits)
> > +               rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(33));
> > +       else
> > +               rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> > +       if (rc)
> > +               return rc;
> > +
> > +       dma_cap_set(DMA_SLAVE, mtkd->ddev.cap_mask);
> > +       mtkd->ddev.device_alloc_chan_resources = mtk_dma_alloc_chan_resources;
> > +       mtkd->ddev.device_free_chan_resources = mtk_dma_free_chan_resources;
> > +       mtkd->ddev.device_tx_status = mtk_dma_tx_status;
> > +       mtkd->ddev.device_issue_pending = mtk_dma_issue_pending;
> > +       mtkd->ddev.device_prep_slave_sg = mtk_dma_prep_slave_sg;
> > +       mtkd->ddev.device_config = mtk_dma_slave_config;
> > +       mtkd->ddev.device_pause = mtk_dma_device_pause;
> > +       mtkd->ddev.device_resume = mtk_dma_device_resume;
> > +       mtkd->ddev.device_terminate_all = mtk_dma_terminate_all;
> > +       mtkd->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> > +       mtkd->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> > +       mtkd->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
> > +       mtkd->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
> > +       mtkd->ddev.dev = &pdev->dev;
> > +       INIT_LIST_HEAD(&mtkd->ddev.channels);
> > +       INIT_LIST_HEAD(&mtkd->pending);
> > +
> > +       spin_lock_init(&mtkd->lock);
> > +       tasklet_init(&mtkd->task, mtk_dma_sched, (unsigned long)mtkd);
> > +
> > +       mtkd->dma_requests = MTK_APDMA_DEFAULT_REQUESTS;
> > +       if (of_property_read_u32(pdev->dev.of_node,
> > +                                "dma-requests", &mtkd->dma_requests)) {
> > +               dev_info(&pdev->dev,
> > +                        "Missing dma-requests property, using %u.\n",
> > +                        MTK_APDMA_DEFAULT_REQUESTS);
> > +       }
> > +
> > +       for (i = 0; i < MTK_APDMA_CHANNELS; i++) {
> > +               c = devm_kzalloc(mtkd->ddev.dev, sizeof(*c), GFP_KERNEL);
> > +               if (!c)
> > +                       goto err_no_dma;
> > +
> > +               c->vc.desc_free = mtk_dma_desc_free;
> > +               vchan_init(&c->vc, &mtkd->ddev);
> > +               INIT_LIST_HEAD(&c->node);
> > +       }
> > +
> > +       pm_runtime_enable(&pdev->dev);
> > +       pm_runtime_set_active(&pdev->dev);
> > +
> > +       rc = dma_async_device_register(&mtkd->ddev);
> > +       if (rc)
> > +               goto rpm_disable;
> > +
> > +       platform_set_drvdata(pdev, mtkd);
> > +
> > +       if (pdev->dev.of_node) {
> > +               mtk_dma_info.dma_cap = mtkd->ddev.cap_mask;
> > +
> > +               /* Device-tree DMA controller registration */
> > +               rc = of_dma_controller_register(pdev->dev.of_node,
> > +                                               of_dma_simple_xlate,
> > +                                               &mtk_dma_info);
> 
> reusing of_dma_xlate_by_chan_id seem that also work for you.

in filter_fn function, neeg get number of dma.
> 
> > +               if (rc)
> > +                       goto dma_remove;
> > +       }
> > +
> > +       return rc;
> > +
> > +dma_remove:
> > +       dma_async_device_unregister(&mtkd->ddev);
> > +rpm_disable:
> > +       pm_runtime_disable(&pdev->dev);
> > +err_no_dma:
> > +       mtk_dma_free(mtkd);
> > +       return rc;
> > +}
> > +
> > +static int mtk_apdma_remove(struct platform_device *pdev)
> > +{
> > +       struct mtk_dmadev *mtkd = platform_get_drvdata(pdev);
> > +
> > +       if (pdev->dev.of_node)
> > +               of_dma_controller_free(pdev->dev.of_node);
> > +
> > +       pm_runtime_disable(&pdev->dev);
> > +       pm_runtime_put_noidle(&pdev->dev);
> > +
> > +       dma_async_device_unregister(&mtkd->ddev);
> > +
> > +       mtk_dma_free(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int mtk_dma_suspend(struct device *dev)
> > +{
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       if (!pm_runtime_suspended(dev))
> > +               mtk_dma_clk_disable(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_resume(struct device *dev)
> > +{
> > +       int ret;
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       if (!pm_runtime_suspended(dev)) {
> > +               ret = mtk_dma_clk_enable(mtkd);
> > +               if (ret)
> > +                       return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_runtime_suspend(struct device *dev)
> > +{
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       mtk_dma_clk_disable(mtkd);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_dma_runtime_resume(struct device *dev)
> > +{
> > +       int ret;
> > +       struct mtk_dmadev *mtkd = dev_get_drvdata(dev);
> > +
> > +       ret = mtk_dma_clk_enable(mtkd);
> > +       if (ret)
> > +               return ret;
> > +
> > +       return 0;
> > +}
> > +
> > +#endif /* CONFIG_PM_SLEEP */
> > +
> > +static const struct dev_pm_ops mtk_dma_pm_ops = {
> > +       SET_SYSTEM_SLEEP_PM_OPS(mtk_dma_suspend, mtk_dma_resume)
> > +       SET_RUNTIME_PM_OPS(mtk_dma_runtime_suspend,
> > +                          mtk_dma_runtime_resume, NULL)
> > +};
> > +
> > +static struct platform_driver mtk_dma_driver = {
> > +       .probe  = mtk_apdma_probe,
> > +       .remove = mtk_apdma_remove,
> > +       .driver = {
> > +               .name           = KBUILD_MODNAME,
> > +               .pm             = &mtk_dma_pm_ops,
> > +               .of_match_table = of_match_ptr(mtk_uart_dma_match),
> > +       },
> > +};
> > +
> > +static bool mtk_dma_filter_fn(struct dma_chan *chan, void *param)
> > +{
> > +       if (chan->device->dev->driver == &mtk_dma_driver.driver) {
> > +               struct mtk_dmadev *mtkd = to_mtk_dma_dev(chan->device);
> > +               struct mtk_chan *c = to_mtk_dma_chan(chan);
> > +               unsigned int req = *(unsigned int *)param;
> > +
> > +               if (req <= mtkd->dma_requests) {
> > +                       c->dma_sig = req;
> > +                       c->dma_ch = req;
> > +                       return true;
> > +               }
> > +       }
> > +       return false;
> > +}
> > +
> > +module_platform_driver(mtk_dma_driver);
> > +
> > +MODULE_DESCRIPTION("MediaTek UART APDMA Controller Driver");
> > +MODULE_AUTHOR("Long Cheng <long.cheng@mediatek.com>");
> > +MODULE_LICENSE("GPL v2");
> > +
> > diff --git a/drivers/dma/mediatek/Kconfig b/drivers/dma/mediatek/Kconfig
> > index 27bac0b..bef436e 100644
> > --- a/drivers/dma/mediatek/Kconfig
> > +++ b/drivers/dma/mediatek/Kconfig
> > @@ -1,4 +1,15 @@
> >
> > +config DMA_MTK_UART
> > +       tristate "MediaTek SoCs APDMA support for UART"
> > +       depends on OF
> > +       select DMA_ENGINE
> > +       select DMA_VIRTUAL_CHANNELS
> > +       help
> > +         Support for the UART DMA engine found on MediaTek MTK SoCs.
> > +         when 8250 mtk uart is enabled, and if you want to using DMA,
> > +         you can enable the config. the DMA engine just only be used
> > +         with MediaTek Socs.
> > +
> >  config MTK_HSDMA
> >         tristate "MediaTek High-Speed DMA controller support"
> >         depends on ARCH_MEDIATEK || COMPILE_TEST
> > diff --git a/drivers/dma/mediatek/Makefile b/drivers/dma/mediatek/Makefile
> > index 6e778f8..2f2efd9 100644
> > --- a/drivers/dma/mediatek/Makefile
> > +++ b/drivers/dma/mediatek/Makefile
> > @@ -1 +1,2 @@
> > +obj-$(CONFIG_DMA_MTK_UART) += 8250_mtk_dma.o
> >  obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
> > --
> > 1.7.9.5
> >
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2018-12-06  9:55 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-06  9:55 Long Cheng [this message]
2018-12-06  9:55 ` [PATCH v2 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support Long Cheng
2018-12-06  9:55 ` Long Cheng
  -- strict thread matches above, loose matches on Subject: below --
2018-12-06 21:22 [v2,2/4] " Sean Wang
2018-12-06 21:22 ` [PATCH v2 2/4] " Sean Wang
2018-12-06 21:22 ` Sean Wang
2018-12-05 21:07 [v2,2/4] " Sean Wang
2018-12-05 21:07 ` [PATCH v2 2/4] " Sean Wang
2018-12-05 21:07 ` Sean Wang
2018-12-05  8:43 [v2,4/4] arm: dts: mt2701: add uart APDMA to device tree Long Cheng
2018-12-05  8:43 ` [PATCH v2 4/4] " Long Cheng
2018-12-05  8:43 ` Long Cheng
2018-12-05  8:42 [v2,3/4] serial: 8250-mtk: add uart DMA support Long Cheng
2018-12-05  8:42 ` [PATCH v2 3/4] " Long Cheng
2018-12-05  8:42 ` Long Cheng
2018-12-05  8:42 [v2,2/4] dmaengine: mtk_uart_dma: add Mediatek " Long Cheng
2018-12-05  8:42 ` [PATCH v2 2/4] " Long Cheng
2018-12-05  8:42 ` Long Cheng
2018-12-05  8:42 [v2,1/4] dt-bindings: dma: uart: add uart dma bindings Long Cheng
2018-12-05  8:42 ` [PATCH v2 1/4] " Long Cheng
2018-12-05  8:42 ` Long Cheng
2018-12-05  8:42 [PATCH v2 0/4] add uart DMA function Long Cheng
2018-12-05  8:42 ` Long Cheng
2018-12-05 10:03 ` Greg Kroah-Hartman
2018-12-05 10:03   ` Greg Kroah-Hartman
2018-12-05 16:31   ` Vinod Koul
2018-12-05 16:31     ` Vinod Koul
2018-12-05 18:50     ` Greg Kroah-Hartman
2018-12-05 18:50       ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544090140.28871.11.camel@mhfsdcap03 \
    --to=long.cheng@mediatek.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=vkoul@kernel.org \
    --cc=yingjoe.chen@mediatek.com \
    --cc=yt.shen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.