All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rakesh Pillai <pillair@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: Rakesh Pillai <pillair@codeaurora.org>, linux-wireless@vger.kernel.org
Subject: [PATCH] ath10k: Fix hw-restart crash inject mode for WCN3990
Date: Tue, 29 Jan 2019 14:56:07 +0530	[thread overview]
Message-ID: <1548753967-2233-1-git-send-email-pillair@codeaurora.org> (raw)

The hw-restart crash inject mode is a special mode, where
there is no crash generated in the firmware, but instead
the driver restarts the firmware. In order to restart WCN3990
firmware, the driver needs to send qmi_wlan_disable message
followed by the qmi_wlan_enable message to the WCN3990 firmware.

Currently the qmi_wlan_disable message is not sent to
the WCN3990 firmware when hw-restart crash is injected,
which causes the firmware to crash when the driver sends
qmi_wlan_enable message during ath10k_restart.

Send qmi_wlan_disable to the WCN3990 firmware when the
hw-restart crash is injected via debugfs.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 54efe6b..cceb6d4 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1000,7 +1000,16 @@ static int ath10k_snoc_wlan_enable(struct ath10k *ar)
 
 static void ath10k_snoc_wlan_disable(struct ath10k *ar)
 {
-	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
+	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+
+	/* If both ATH10K_FLAG_CRASH_FLUSH and ATH10K_SNOC_FLAG_RECOVERY
+	 * flags are not set, it means that the driver has restarted
+	 * due to a crash inject via debugfs. In this case, the driver
+	 * needs to restart the firmware and hence send qmi wlan disable,
+	 * during the driver restart sequence.
+	 */
+	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags) ||
+	    !test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags))
 		ath10k_qmi_wlan_disable(ar);
 }
 
-- 
2.7.4


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Rakesh Pillai <pillair@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Rakesh Pillai <pillair@codeaurora.org>
Subject: [PATCH] ath10k: Fix hw-restart crash inject mode for WCN3990
Date: Tue, 29 Jan 2019 14:56:07 +0530	[thread overview]
Message-ID: <1548753967-2233-1-git-send-email-pillair@codeaurora.org> (raw)

The hw-restart crash inject mode is a special mode, where
there is no crash generated in the firmware, but instead
the driver restarts the firmware. In order to restart WCN3990
firmware, the driver needs to send qmi_wlan_disable message
followed by the qmi_wlan_enable message to the WCN3990 firmware.

Currently the qmi_wlan_disable message is not sent to
the WCN3990 firmware when hw-restart crash is injected,
which causes the firmware to crash when the driver sends
qmi_wlan_enable message during ath10k_restart.

Send qmi_wlan_disable to the WCN3990 firmware when the
hw-restart crash is injected via debugfs.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 54efe6b..cceb6d4 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1000,7 +1000,16 @@ static int ath10k_snoc_wlan_enable(struct ath10k *ar)
 
 static void ath10k_snoc_wlan_disable(struct ath10k *ar)
 {
-	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
+	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+
+	/* If both ATH10K_FLAG_CRASH_FLUSH and ATH10K_SNOC_FLAG_RECOVERY
+	 * flags are not set, it means that the driver has restarted
+	 * due to a crash inject via debugfs. In this case, the driver
+	 * needs to restart the firmware and hence send qmi wlan disable,
+	 * during the driver restart sequence.
+	 */
+	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags) ||
+	    !test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags))
 		ath10k_qmi_wlan_disable(ar);
 }
 
-- 
2.7.4


             reply	other threads:[~2019-01-29  9:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29  9:26 Rakesh Pillai [this message]
2019-01-29  9:26 ` [PATCH] ath10k: Fix hw-restart crash inject mode for WCN3990 Rakesh Pillai
2019-02-07 14:51 ` Kalle Valo
2019-02-07 14:51 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1548753967-2233-1-git-send-email-pillair@codeaurora.org \
    --to=pillair@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.