All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abhishek Ambure <aambure@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: Abhishek Ambure <aambure@codeaurora.org>, linux-wireless@vger.kernel.org
Subject: [PATCH] ath10k: update the max num of peers supported for WCN3990
Date: Tue, 19 Feb 2019 15:31:08 +0530	[thread overview]
Message-ID: <1550570468-25869-1-git-send-email-aambure@codeaurora.org> (raw)

WCN3990 firmware versions WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 & onwards
supports maximum 33 peers including self peer. To support maximum peers,
send updated peer param to firmware during initialization.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 6 +++---
 drivers/net/wireless/ath/ath10k/hw.h   | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index a1b2aea..336c6a4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -560,10 +560,10 @@
 		.sw_decrypt_mcast_mgmt = true,
 		.hw_ops = &wcn3990_ops,
 		.decap_align_bytes = 1,
-		.num_peers = TARGET_HL_10_TLV_NUM_PEERS,
+		.num_peers = TARGET_HL_TLV_NUM_PEERS,
 		.n_cipher_suites = 11,
-		.ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT,
-		.num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES,
+		.ast_skid_limit = TARGET_HL_TLV_AST_SKID_LIMIT,
+		.num_wds_entries = TARGET_HL_TLV_NUM_WDS_ENTRIES,
 		.target_64bit = true,
 		.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC,
 		.per_ce_irq = true,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index fe6b2ed..67413ae 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -763,9 +763,9 @@ struct ath10k_hw_ops {
 #define TARGET_TLV_MGMT_NUM_MSDU_DESC		(50)
 
 /* Target specific defines for WMI-HL-1.0 firmware */
-#define TARGET_HL_10_TLV_NUM_PEERS		14
-#define TARGET_HL_10_TLV_AST_SKID_LIMIT		6
-#define TARGET_HL_10_TLV_NUM_WDS_ENTRIES	2
+#define TARGET_HL_TLV_NUM_PEERS			33
+#define TARGET_HL_TLV_AST_SKID_LIMIT		16
+#define TARGET_HL_TLV_NUM_WDS_ENTRIES		2
 
 /* Diagnostic Window */
 #define CE_DIAG_PIPE	7
-- 
1.9.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Abhishek Ambure <aambure@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Abhishek Ambure <aambure@codeaurora.org>
Subject: [PATCH] ath10k: update the max num of peers supported for WCN3990
Date: Tue, 19 Feb 2019 15:31:08 +0530	[thread overview]
Message-ID: <1550570468-25869-1-git-send-email-aambure@codeaurora.org> (raw)

WCN3990 firmware versions WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 & onwards
supports maximum 33 peers including self peer. To support maximum peers,
send updated peer param to firmware during initialization.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 6 +++---
 drivers/net/wireless/ath/ath10k/hw.h   | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index a1b2aea..336c6a4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -560,10 +560,10 @@
 		.sw_decrypt_mcast_mgmt = true,
 		.hw_ops = &wcn3990_ops,
 		.decap_align_bytes = 1,
-		.num_peers = TARGET_HL_10_TLV_NUM_PEERS,
+		.num_peers = TARGET_HL_TLV_NUM_PEERS,
 		.n_cipher_suites = 11,
-		.ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT,
-		.num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES,
+		.ast_skid_limit = TARGET_HL_TLV_AST_SKID_LIMIT,
+		.num_wds_entries = TARGET_HL_TLV_NUM_WDS_ENTRIES,
 		.target_64bit = true,
 		.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC,
 		.per_ce_irq = true,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index fe6b2ed..67413ae 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -763,9 +763,9 @@ struct ath10k_hw_ops {
 #define TARGET_TLV_MGMT_NUM_MSDU_DESC		(50)
 
 /* Target specific defines for WMI-HL-1.0 firmware */
-#define TARGET_HL_10_TLV_NUM_PEERS		14
-#define TARGET_HL_10_TLV_AST_SKID_LIMIT		6
-#define TARGET_HL_10_TLV_NUM_WDS_ENTRIES	2
+#define TARGET_HL_TLV_NUM_PEERS			33
+#define TARGET_HL_TLV_AST_SKID_LIMIT		16
+#define TARGET_HL_TLV_NUM_WDS_ENTRIES		2
 
 /* Diagnostic Window */
 #define CE_DIAG_PIPE	7
-- 
1.9.1


             reply	other threads:[~2019-02-19 10:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-19 10:01 Abhishek Ambure [this message]
2019-02-19 10:01 ` [PATCH] ath10k: update the max num of peers supported for WCN3990 Abhishek Ambure
2019-02-26 13:07 ` Kalle Valo
2019-02-26 13:07 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1550570468-25869-1-git-send-email-aambure@codeaurora.org \
    --to=aambure@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.