From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Ahmad Masri <amasri@codeaurora.org>,
linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
Maya Erez <merez@codeaurora.org>
Subject: [PATCH 04/21] wil6210: accessing 802.3 addresses via utility functions
Date: Fri, 22 Feb 2019 16:21:02 +0200 [thread overview]
Message-ID: <1550845279-16103-5-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1550845279-16103-1-git-send-email-merez@codeaurora.org>
From: Ahmad Masri <amasri@codeaurora.org>
Rearrange the code by having functions to access 802.3 header
members, source and destination addresses.
Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/txrx.c | 36 ++++++++++++++++-----------------
drivers/net/wireless/ath/wil6210/txrx.h | 18 +++++++++++++++--
2 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 5aa1427..4ccfd14 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -383,7 +383,6 @@ static int wil_rx_get_cid_by_skb(struct wil6210_priv *wil, struct sk_buff *skb)
*/
int cid = wil_rxdesc_cid(d);
unsigned int snaplen = wil_rx_snaplen();
- struct ethhdr *eth;
struct ieee80211_hdr_3addr *hdr;
int i;
unsigned char *ta;
@@ -401,8 +400,7 @@ static int wil_rx_get_cid_by_skb(struct wil6210_priv *wil, struct sk_buff *skb)
skb->len);
return -ENOENT;
}
- eth = (void *)skb->data;
- ta = eth->h_source;
+ ta = wil_skb_get_sa(skb);
} else {
if (unlikely(skb->len < sizeof(struct ieee80211_hdr_3addr))) {
wil_err_ratelimited(wil, "Short frame, len = %d\n",
@@ -739,11 +737,11 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
unsigned int len = skb->len;
int cid;
int security;
- struct ethhdr *eth = (void *)skb->data;
+ u8 *sa, *da = wil_skb_get_da(skb);
/* here looking for DA, not A1, thus Rxdesc's 'mcast' indication
* is not suitable, need to look at data
*/
- int mcast = is_multicast_ether_addr(eth->h_dest);
+ int mcast = is_multicast_ether_addr(da);
struct wil_net_stats *stats;
struct sk_buff *xmit_skb = NULL;
static const char * const gro_res_str[] = {
@@ -774,7 +772,8 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
}
if (wdev->iftype == NL80211_IFTYPE_STATION) {
- if (mcast && ether_addr_equal(eth->h_source, ndev->dev_addr)) {
+ sa = wil_skb_get_sa(skb);
+ if (mcast && ether_addr_equal(sa, ndev->dev_addr)) {
/* mcast packet looped back to us */
rc = GRO_DROP;
dev_kfree_skb(skb);
@@ -787,8 +786,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
*/
xmit_skb = skb_copy(skb, GFP_ATOMIC);
} else {
- int xmit_cid = wil_find_cid(wil, vif->mid,
- eth->h_dest);
+ int xmit_cid = wil_find_cid(wil, vif->mid, da);
if (xmit_cid >= 0) {
/* The destination station is associated to
@@ -1239,11 +1237,12 @@ static struct wil_ring *wil_find_tx_ucast(struct wil6210_priv *wil,
struct wil6210_vif *vif,
struct sk_buff *skb)
{
- int i;
- struct ethhdr *eth = (void *)skb->data;
- int cid = wil_find_cid(wil, vif->mid, eth->h_dest);
+ int i, cid;
+ const u8 *da = wil_skb_get_da(skb);
int min_ring_id = wil_get_min_tx_ring_id(wil);
+ cid = wil_find_cid(wil, vif->mid, da);
+
if (cid < 0 || cid >= max_assoc_sta)
return NULL;
@@ -1257,7 +1256,7 @@ static struct wil_ring *wil_find_tx_ucast(struct wil6210_priv *wil,
struct wil_ring_tx_data *txdata = &wil->ring_tx_data[i];
wil_dbg_txrx(wil, "find_tx_ucast: (%pM) -> [%d]\n",
- eth->h_dest, i);
+ da, i);
if (v->va && txdata->enabled) {
return v;
} else {
@@ -1348,10 +1347,10 @@ static struct wil_ring *wil_find_tx_bcast_1(struct wil6210_priv *wil,
static void wil_set_da_for_vring(struct wil6210_priv *wil,
struct sk_buff *skb, int vring_index)
{
- struct ethhdr *eth = (void *)skb->data;
+ u8 *da = wil_skb_get_da(skb);
int cid = wil->ring2cid_tid[vring_index][0];
- ether_addr_copy(eth->h_dest, wil->sta[cid].addr);
+ ether_addr_copy(da, wil->sta[cid].addr);
}
static struct wil_ring *wil_find_tx_bcast_2(struct wil6210_priv *wil,
@@ -1362,8 +1361,7 @@ static struct wil_ring *wil_find_tx_bcast_2(struct wil6210_priv *wil,
struct sk_buff *skb2;
int i;
u8 cid;
- struct ethhdr *eth = (void *)skb->data;
- char *src = eth->h_source;
+ const u8 *src = wil_skb_get_sa(skb);
struct wil_ring_tx_data *txdata, *txdata2;
int min_ring_id = wil_get_min_tx_ring_id(wil);
@@ -2121,8 +2119,8 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct wil6210_vif *vif = ndev_to_vif(ndev);
struct wil6210_priv *wil = vif_to_wil(vif);
- struct ethhdr *eth = (void *)skb->data;
- bool bcast = is_multicast_ether_addr(eth->h_dest);
+ const u8 *da = wil_skb_get_da(skb);
+ bool bcast = is_multicast_ether_addr(da);
struct wil_ring *ring;
static bool pr_once_fw;
int rc;
@@ -2169,7 +2167,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
ring = wil_find_tx_ucast(wil, vif, skb);
}
if (unlikely(!ring)) {
- wil_dbg_txrx(wil, "No Tx RING found for %pM\n", eth->h_dest);
+ wil_dbg_txrx(wil, "No Tx RING found for %pM\n", da);
goto drop;
}
/* set up vring entry */
diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h
index 1aec04d..c0da134 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.h
+++ b/drivers/net/wireless/ath/wil6210/txrx.h
@@ -567,11 +567,25 @@ static inline int wil_ring_is_full(struct wil_ring *ring)
return wil_ring_next_tail(ring) == ring->swhead;
}
-static inline bool wil_need_txstat(struct sk_buff *skb)
+static inline u8 *wil_skb_get_da(struct sk_buff *skb)
+{
+ struct ethhdr *eth = (void *)skb->data;
+
+ return eth->h_dest;
+}
+
+static inline u8 *wil_skb_get_sa(struct sk_buff *skb)
{
struct ethhdr *eth = (void *)skb->data;
- return is_unicast_ether_addr(eth->h_dest) && skb->sk &&
+ return eth->h_source;
+}
+
+static inline bool wil_need_txstat(struct sk_buff *skb)
+{
+ const u8 *da = wil_skb_get_da(skb);
+
+ return is_unicast_ether_addr(da) && skb->sk &&
(skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS);
}
--
1.9.1
next prev parent reply other threads:[~2019-02-22 14:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-22 14:20 [PATCH 00/21] wil6210 patches Maya Erez
2019-02-22 14:20 ` [PATCH 01/21] wil6210: remove rtap_include_phy_info module param Maya Erez
2019-02-28 9:25 ` Kalle Valo
2019-02-22 14:21 ` [PATCH 02/21] wil6210: add option to drop Tx packets when Tx ring is full Maya Erez
2019-02-22 14:21 ` [PATCH 03/21] wil6210: support up to 20 stations in AP mode Maya Erez
2019-02-28 9:17 ` Kalle Valo
2019-02-28 10:36 ` merez
2019-02-22 14:21 ` Maya Erez [this message]
2019-02-22 14:21 ` [PATCH 05/21] wil6210: fix invalid sta statistics update Maya Erez
2019-02-22 14:21 ` [PATCH 06/21] wil6210: ignore HALP ICR if already handled Maya Erez
2019-02-22 14:21 ` [PATCH 07/21] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Maya Erez
2019-02-22 14:21 ` [PATCH 08/21] wil6210: align to latest auto generated wmi.h Maya Erez
2019-04-03 12:43 ` Kalle Valo
2019-02-22 14:21 ` [PATCH 09/21] wil6210: prevent device memory access while in reset or suspend Maya Erez
2019-02-22 14:21 ` [PATCH 10/21] wil6210: increase PCP stop command timeout Maya Erez
2019-02-22 14:21 ` [PATCH 11/21] wil6210: do not set BIT_USER_SUPPORT_T_POWER_ON_0 in Talyn-MB Maya Erez
2019-02-22 14:21 ` [PATCH 12/21] wil6210: update WIL_MCS_MAX to 15 Maya Erez
2019-02-22 14:21 ` [PATCH 13/21] wil6210: check mid is valid Maya Erez
2019-02-22 14:21 ` [PATCH 14/21] wil6210: use OEM MAC address from OTP Maya Erez
2019-02-22 14:21 ` [PATCH 15/21] wil6210: free edma_rx_swtail upon reset Maya Erez
2019-02-22 14:21 ` [PATCH 16/21] wil6210: fix report of rx packet checksum in edma mode Maya Erez
2019-04-03 12:46 ` Kalle Valo
2019-02-22 14:21 ` [PATCH 17/21] wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext Maya Erez
2019-02-22 14:21 ` [PATCH 18/21] wil6210: prevent access to RGF_CAF_ICR in Talyn Maya Erez
2019-02-22 14:21 ` [PATCH 19/21] wil6210: add support for ucode tracing Maya Erez
2019-02-22 14:21 ` [PATCH 20/21] wil6210: reset buff id in status message after completion Maya Erez
2019-02-22 14:21 ` [PATCH 21/21] wil6210: print error in FW and board files load failures Maya Erez
2019-02-28 9:05 ` [PATCH 00/21] wil6210 patches Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550845279-16103-5-git-send-email-merez@codeaurora.org \
--to=merez@codeaurora.org \
--cc=amasri@codeaurora.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=wil6210@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.