From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Alexei Avshalom Lazar <ailizaro@codeaurora.org>,
linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
Maya Erez <merez@codeaurora.org>
Subject: [PATCH 08/21] wil6210: align to latest auto generated wmi.h
Date: Fri, 22 Feb 2019 16:21:06 +0200 [thread overview]
Message-ID: <1550845279-16103-9-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1550845279-16103-1-git-send-email-merez@codeaurora.org>
From: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/wmi.c | 7 +++
drivers/net/wireless/ath/wil6210/wmi.h | 91 ++++++++++++++++++++++++++++++++--
2 files changed, 94 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index bda4a97..c737a79e 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2957,6 +2957,10 @@ static const char *suspend_status2name(u8 status)
switch (status) {
case WMI_TRAFFIC_SUSPEND_REJECTED_LINK_NOT_IDLE:
return "LINK_NOT_IDLE";
+ case WMI_TRAFFIC_SUSPEND_REJECTED_DISCONNECT:
+ return "DISCONNECT";
+ case WMI_TRAFFIC_SUSPEND_REJECTED_OTHER:
+ return "OTHER";
default:
return "Untracked status";
}
@@ -3046,6 +3050,9 @@ static void resume_triggers2string(u32 triggers, char *string, int str_size)
if (triggers & WMI_RESUME_TRIGGER_WMI_EVT)
strlcat(string, " WMI_EVT", str_size);
+
+ if (triggers & WMI_RESUME_TRIGGER_DISCONNECT)
+ strlcat(string, " DISCONNECT", str_size);
}
int wmi_resume(struct wil6210_priv *wil)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index b668758..da46fc8 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
* Copyright (c) 2006-2012 Wilocity
*
@@ -104,6 +104,7 @@ enum wmi_fw_capability {
WMI_FW_CAPABILITY_RAW_MODE = 24,
WMI_FW_CAPABILITY_TX_REQ_EXT = 25,
WMI_FW_CAPABILITY_CHANNEL_4 = 26,
+ WMI_FW_CAPABILITY_IPA = 27,
WMI_FW_CAPABILITY_MAX,
};
@@ -294,6 +295,7 @@ enum wmi_command_id {
WMI_SET_AP_SLOT_SIZE_CMDID = 0xA0F,
WMI_SET_VRING_PRIORITY_WEIGHT_CMDID = 0xA10,
WMI_SET_VRING_PRIORITY_CMDID = 0xA11,
+ WMI_RBUFCAP_CFG_CMDID = 0xA12,
WMI_SET_MAC_ADDRESS_CMDID = 0xF003,
WMI_ABORT_SCAN_CMDID = 0xF007,
WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041,
@@ -979,10 +981,22 @@ enum wmi_rx_msg_type {
WMI_RX_MSG_TYPE_EXTENDED = 0x01,
};
+enum wmi_ring_add_irq_mode {
+ /* Backwards compatibility
+ * for DESC ring - interrupt disabled
+ * for STATUS ring - interrupt enabled
+ */
+ WMI_RING_ADD_IRQ_MODE_BWC = 0x00,
+ WMI_RING_ADD_IRQ_MODE_DISABLE = 0x01,
+ WMI_RING_ADD_IRQ_MODE_ENABLE = 0x02,
+};
+
struct wmi_tx_status_ring_add_cmd {
struct wmi_edma_ring_cfg ring_cfg;
u8 irq_index;
- u8 reserved[3];
+ /* wmi_ring_add_irq_mode */
+ u8 irq_mode;
+ u8 reserved[2];
} __packed;
struct wmi_rx_status_ring_add_cmd {
@@ -1016,7 +1030,10 @@ struct wmi_tx_desc_ring_add_cmd {
u8 mac_ctrl;
u8 to_resolution;
u8 agg_max_wsize;
- u8 reserved[3];
+ u8 irq_index;
+ /* wmi_ring_add_irq_mode */
+ u8 irq_mode;
+ u8 reserved;
struct wmi_vring_cfg_schd schd_params;
} __packed;
@@ -1982,6 +1999,7 @@ enum wmi_event_id {
WMI_BEAMFORMING_MGMT_DONE_EVENTID = 0x1836,
WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
+ WMI_BF_TRIG_EVENTID = 0x183A,
WMI_RS_MGMT_DONE_EVENTID = 0x1852,
WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
@@ -2082,6 +2100,7 @@ enum wmi_event_id {
WMI_SET_AP_SLOT_SIZE_EVENTID = 0x1A0F,
WMI_SET_VRING_PRIORITY_WEIGHT_EVENTID = 0x1A10,
WMI_SET_VRING_PRIORITY_EVENTID = 0x1A11,
+ WMI_RBUFCAP_CFG_EVENTID = 0x1A12,
WMI_SET_CHANNEL_EVENTID = 0x9000,
WMI_ASSOC_REQ_EVENTID = 0x9001,
WMI_EAPOL_RX_EVENTID = 0x9002,
@@ -2267,7 +2286,9 @@ struct wmi_notify_req_done_event {
__le32 status;
__le64 tsf;
s8 rssi;
- u8 reserved0[3];
+ /* enum wmi_edmg_tx_mode */
+ u8 tx_mode;
+ u8 reserved0[2];
__le32 tx_tpt;
__le32 tx_goodput;
__le32 rx_goodput;
@@ -2316,6 +2337,7 @@ enum wmi_disconnect_reason {
WMI_DIS_REASON_PROFILE_MISMATCH = 0x0C,
WMI_DIS_REASON_CONNECTION_EVICTED = 0x0D,
WMI_DIS_REASON_IBSS_MERGE = 0x0E,
+ WMI_DIS_REASON_HIGH_TEMPERATURE = 0x0F,
};
/* WMI_DISCONNECT_EVENTID */
@@ -3168,6 +3190,30 @@ struct wmi_brp_set_ant_limit_event {
u8 reserved[3];
} __packed;
+enum wmi_bf_type {
+ WMI_BF_TYPE_SLS = 0x00,
+ WMI_BF_TYPE_BRP_RX = 0x01,
+};
+
+/* WMI_BF_TRIG_CMDID */
+struct wmi_bf_trig_cmd {
+ /* enum wmi_bf_type - type of requested beamforming */
+ u8 bf_type;
+ /* used only for WMI_BF_TYPE_BRP_RX */
+ u8 cid;
+ /* used only for WMI_BF_TYPE_SLS */
+ u8 dst_mac[WMI_MAC_LEN];
+ u8 reserved[4];
+} __packed;
+
+/* WMI_BF_TRIG_EVENTID */
+struct wmi_bf_trig_event {
+ /* enum wmi_fw_status */
+ u8 status;
+ u8 cid;
+ u8 reserved[2];
+} __packed;
+
/* broadcast connection ID */
#define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST (0xFFFFFFFF)
@@ -3263,6 +3309,8 @@ struct wmi_link_maintain_cfg_read_done_event {
enum wmi_traffic_suspend_status {
WMI_TRAFFIC_SUSPEND_APPROVED = 0x0,
WMI_TRAFFIC_SUSPEND_REJECTED_LINK_NOT_IDLE = 0x1,
+ WMI_TRAFFIC_SUSPEND_REJECTED_DISCONNECT = 0x2,
+ WMI_TRAFFIC_SUSPEND_REJECTED_OTHER = 0x3,
};
/* WMI_TRAFFIC_SUSPEND_EVENTID */
@@ -3282,6 +3330,7 @@ enum wmi_resume_trigger {
WMI_RESUME_TRIGGER_UCAST_RX = 0x2,
WMI_RESUME_TRIGGER_BCAST_RX = 0x4,
WMI_RESUME_TRIGGER_WMI_EVT = 0x8,
+ WMI_RESUME_TRIGGER_DISCONNECT = 0x10,
};
/* WMI_TRAFFIC_RESUME_EVENTID */
@@ -4057,4 +4106,38 @@ struct wmi_set_vring_priority_event {
u8 reserved[3];
} __packed;
+/* WMI_RADAR_PCI_CTRL_BLOCK struct */
+struct wmi_radar_pci_ctrl_block {
+ /* last fw tail address index */
+ __le32 fw_tail_index;
+ /* last SW head address index known to FW */
+ __le32 sw_head_index;
+ __le32 last_wr_pulse_tsf_low;
+ __le32 last_wr_pulse_count;
+ __le32 last_wr_in_bytes;
+ __le32 last_wr_pulse_id;
+ __le32 last_wr_burst_id;
+ /* When pre overflow detected, advance sw head in unit of pulses */
+ __le32 sw_head_inc;
+ __le32 reserved[8];
+} __packed;
+
+/* WMI_RBUFCAP_CFG_CMD */
+struct wmi_rbufcap_cfg_cmd {
+ u8 enable;
+ u8 reserved;
+ /* RBUFCAP indicates rx space unavailable when number of rx
+ * descriptors drops below this threshold. Set 0 to use system
+ * default
+ */
+ __le16 rx_desc_threshold;
+} __packed;
+
+/* WMI_RBUFCAP_CFG_EVENTID */
+struct wmi_rbufcap_cfg_event {
+ /* enum wmi_fw_status */
+ u8 status;
+ u8 reserved[3];
+} __packed;
+
#endif /* __WILOCITY_WMI_H__ */
--
1.9.1
next prev parent reply other threads:[~2019-02-22 14:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-22 14:20 [PATCH 00/21] wil6210 patches Maya Erez
2019-02-22 14:20 ` [PATCH 01/21] wil6210: remove rtap_include_phy_info module param Maya Erez
2019-02-28 9:25 ` Kalle Valo
2019-02-22 14:21 ` [PATCH 02/21] wil6210: add option to drop Tx packets when Tx ring is full Maya Erez
2019-02-22 14:21 ` [PATCH 03/21] wil6210: support up to 20 stations in AP mode Maya Erez
2019-02-28 9:17 ` Kalle Valo
2019-02-28 10:36 ` merez
2019-02-22 14:21 ` [PATCH 04/21] wil6210: accessing 802.3 addresses via utility functions Maya Erez
2019-02-22 14:21 ` [PATCH 05/21] wil6210: fix invalid sta statistics update Maya Erez
2019-02-22 14:21 ` [PATCH 06/21] wil6210: ignore HALP ICR if already handled Maya Erez
2019-02-22 14:21 ` [PATCH 07/21] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Maya Erez
2019-02-22 14:21 ` Maya Erez [this message]
2019-04-03 12:43 ` [PATCH 08/21] wil6210: align to latest auto generated wmi.h Kalle Valo
2019-02-22 14:21 ` [PATCH 09/21] wil6210: prevent device memory access while in reset or suspend Maya Erez
2019-02-22 14:21 ` [PATCH 10/21] wil6210: increase PCP stop command timeout Maya Erez
2019-02-22 14:21 ` [PATCH 11/21] wil6210: do not set BIT_USER_SUPPORT_T_POWER_ON_0 in Talyn-MB Maya Erez
2019-02-22 14:21 ` [PATCH 12/21] wil6210: update WIL_MCS_MAX to 15 Maya Erez
2019-02-22 14:21 ` [PATCH 13/21] wil6210: check mid is valid Maya Erez
2019-02-22 14:21 ` [PATCH 14/21] wil6210: use OEM MAC address from OTP Maya Erez
2019-02-22 14:21 ` [PATCH 15/21] wil6210: free edma_rx_swtail upon reset Maya Erez
2019-02-22 14:21 ` [PATCH 16/21] wil6210: fix report of rx packet checksum in edma mode Maya Erez
2019-04-03 12:46 ` Kalle Valo
2019-02-22 14:21 ` [PATCH 17/21] wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext Maya Erez
2019-02-22 14:21 ` [PATCH 18/21] wil6210: prevent access to RGF_CAF_ICR in Talyn Maya Erez
2019-02-22 14:21 ` [PATCH 19/21] wil6210: add support for ucode tracing Maya Erez
2019-02-22 14:21 ` [PATCH 20/21] wil6210: reset buff id in status message after completion Maya Erez
2019-02-22 14:21 ` [PATCH 21/21] wil6210: print error in FW and board files load failures Maya Erez
2019-02-28 9:05 ` [PATCH 00/21] wil6210 patches Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550845279-16103-9-git-send-email-merez@codeaurora.org \
--to=merez@codeaurora.org \
--cc=ailizaro@codeaurora.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=wil6210@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.