[PATCH v2 00/10] support gce on mt8183 platform

[PATCH v2 00/10] support gce on mt8183 platform

[Bibby Hsieh]

Changes since v1:
 - add prefix "cmdq" in the commit subject
 - add dt-binding document for get event and subsys function
 - add fix up tag in fixup patch
 - fix up some coding style (alignment)

MTK will support gce function on mt8183 platform.
	dt-binding: gce: add gce header file for mt8183
	soc: mediatek: cmdq: add mt8183 compatible name

Besides above patches, we refine gce driver on those patches.
	soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data
	soc: mediatek: cmdq: clear the event in cmdq initial flow

In ordet to enhance the convenience of gce usage, we add new helper
functions and refine the method of instruction combining. 
	dt-binding: gce: add binding for gce event property
	dt-binding: gce: add binding for gce subsys property
	soc: mediatek: cmdq: add packet encoder function
	soc: mediatek: cmdq: add polling function
	soc: mediatek: cmdq: add cmdq_dev_get_subsys function
	soc: mediatek: cmdq: add cmdq_dev_get_event function

Bibby Hsieh (10):
  dt-binding: gce: add gce header file for mt8183
  dt-binding: gce: add binding for gce event property
  dt-binding: gce: add binding for gce subsys property
  soc: mediatek: cmdq: add mt8183 compatible name
  soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data
  soc: mediatek: cmdq: clear the event in cmdq initial flow
  soc: mediatek: cmdq: add packet encoder function
  soc: mediatek: cmdq: add polling function
  soc: mediatek: cmdq: add cmdq_dev_get_subsys function
  soc: mediatek: cmdq: add cmdq_dev_get_event function

 .../devicetree/bindings/mailbox/mtk-gce.txt        |  33 +++-
 drivers/mailbox/mtk-cmdq-mailbox.c                 |  18 +-
 drivers/soc/mediatek/mtk-cmdq-helper.c             | 202 +++++++++++++++++----
 include/dt-bindings/gce/mt8183-gce.h               | 177 ++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h           |   5 +
 include/linux/soc/mediatek/mtk-cmdq.h              |  61 ++++++-
 6 files changed, 439 insertions(+), 57 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt8183-gce.h

-- 
1.9.1

[PATCH v2 00/10] support gce on mt8183 platform

[Bibby Hsieh]

Changes since v1:
 - add prefix "cmdq" in the commit subject
 - add dt-binding document for get event and subsys function
 - add fix up tag in fixup patch
 - fix up some coding style (alignment)

MTK will support gce function on mt8183 platform.
	dt-binding: gce: add gce header file for mt8183
	soc: mediatek: cmdq: add mt8183 compatible name

Besides above patches, we refine gce driver on those patches.
	soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data
	soc: mediatek: cmdq: clear the event in cmdq initial flow

In ordet to enhance the convenience of gce usage, we add new helper
functions and refine the method of instruction combining. 
	dt-binding: gce: add binding for gce event property
	dt-binding: gce: add binding for gce subsys property
	soc: mediatek: cmdq: add packet encoder function
	soc: mediatek: cmdq: add polling function
	soc: mediatek: cmdq: add cmdq_dev_get_subsys function
	soc: mediatek: cmdq: add cmdq_dev_get_event function

Bibby Hsieh (10):
  dt-binding: gce: add gce header file for mt8183
  dt-binding: gce: add binding for gce event property
  dt-binding: gce: add binding for gce subsys property
  soc: mediatek: cmdq: add mt8183 compatible name
  soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data
  soc: mediatek: cmdq: clear the event in cmdq initial flow
  soc: mediatek: cmdq: add packet encoder function
  soc: mediatek: cmdq: add polling function
  soc: mediatek: cmdq: add cmdq_dev_get_subsys function
  soc: mediatek: cmdq: add cmdq_dev_get_event function

 .../devicetree/bindings/mailbox/mtk-gce.txt        |  33 +++-
 drivers/mailbox/mtk-cmdq-mailbox.c                 |  18 +-
 drivers/soc/mediatek/mtk-cmdq-helper.c             | 202 +++++++++++++++++----
 include/dt-bindings/gce/mt8183-gce.h               | 177 ++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h           |   5 +
 include/linux/soc/mediatek/mtk-cmdq.h              |  61 ++++++-
 6 files changed, 439 insertions(+), 57 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt8183-gce.h

-- 
1.9.1

[PATCH v2 00/10] support gce on mt8183 platform

[Bibby Hsieh]

Changes since v1:
 - add prefix "cmdq" in the commit subject
 - add dt-binding document for get event and subsys function
 - add fix up tag in fixup patch
 - fix up some coding style (alignment)

MTK will support gce function on mt8183 platform.
	dt-binding: gce: add gce header file for mt8183
	soc: mediatek: cmdq: add mt8183 compatible name

Besides above patches, we refine gce driver on those patches.
	soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data
	soc: mediatek: cmdq: clear the event in cmdq initial flow

In ordet to enhance the convenience of gce usage, we add new helper
functions and refine the method of instruction combining. 
	dt-binding: gce: add binding for gce event property
	dt-binding: gce: add binding for gce subsys property
	soc: mediatek: cmdq: add packet encoder function
	soc: mediatek: cmdq: add polling function
	soc: mediatek: cmdq: add cmdq_dev_get_subsys function
	soc: mediatek: cmdq: add cmdq_dev_get_event function

Bibby Hsieh (10):
  dt-binding: gce: add gce header file for mt8183
  dt-binding: gce: add binding for gce event property
  dt-binding: gce: add binding for gce subsys property
  soc: mediatek: cmdq: add mt8183 compatible name
  soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data
  soc: mediatek: cmdq: clear the event in cmdq initial flow
  soc: mediatek: cmdq: add packet encoder function
  soc: mediatek: cmdq: add polling function
  soc: mediatek: cmdq: add cmdq_dev_get_subsys function
  soc: mediatek: cmdq: add cmdq_dev_get_event function

 .../devicetree/bindings/mailbox/mtk-gce.txt        |  33 +++-
 drivers/mailbox/mtk-cmdq-mailbox.c                 |  18 +-
 drivers/soc/mediatek/mtk-cmdq-helper.c             | 202 +++++++++++++++++----
 include/dt-bindings/gce/mt8183-gce.h               | 177 ++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h           |   5 +
 include/linux/soc/mediatek/mtk-cmdq.h              |  61 ++++++-
 6 files changed, 439 insertions(+), 57 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt8183-gce.h

-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 01/10] dt-binding: gce: add gce header file for mt8183

[Bibby Hsieh]

Add documentation for the mt8183 gce.

Add gce header file defined the gce hardware event,
subsys number and constant for mt8183.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mailbox/mtk-gce.txt        |   6 +-
 include/dt-bindings/gce/mt8183-gce.h               | 177 +++++++++++++++++++++
 2 files changed, 180 insertions(+), 3 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt8183-gce.h

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 7d72b21..9c0d982 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -9,7 +9,7 @@ CMDQ driver uses mailbox framework for communication. Please refer to
 mailbox.txt for generic information about mailbox device-tree bindings.
 
 Required properties:
-- compatible: Must be "mediatek,mt8173-gce"
+- compatible: can be "mediatek,mt8173-gce" or "mediatek,mt8183-gce"
 - reg: Address range of the GCE unit
 - interrupts: The interrupt signal from the GCE block
 - clock: Clocks according to the common clock binding
@@ -28,8 +28,8 @@ Required properties for a client device:
 - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
   to the register address.
 
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as
-sub-system ids, thread priority, event ids.
+Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
+or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
 
 Example:
 
diff --git a/include/dt-bindings/gce/mt8183-gce.h b/include/dt-bindings/gce/mt8183-gce.h
new file mode 100644
index 0000000..aeb9515
--- /dev/null
+++ b/include/dt-bindings/gce/mt8183-gce.h
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Bibby Hsieh <bibby.hsieh@mediatek.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_GCE_MT8183_H
+#define _DT_BINDINGS_GCE_MT8183_H
+
+#define CMDQ_NO_TIMEOUT		0xffffffff
+
+#define CMDQ_THR_MAX_COUNT	24
+
+/* GCE HW thread priority */
+#define CMDQ_THR_PRIO_LOWEST	0
+#define CMDQ_THR_PRIO_HIGHEST	1
+
+/* GCE SUBSYS */
+#define SUBSYS_1300XXXX		0
+#define SUBSYS_1400XXXX		1
+#define SUBSYS_1401XXXX		2
+#define SUBSYS_1402XXXX		3
+#define SUBSYS_1502XXXX		4
+#define SUBSYS_1880XXXX		5
+#define SUBSYS_1881XXXX		6
+#define SUBSYS_1882XXXX		7
+#define SUBSYS_1883XXXX		8
+#define SUBSYS_1884XXXX		9
+#define SUBSYS_1000XXXX		10
+#define SUBSYS_1001XXXX		11
+#define SUBSYS_1002XXXX		12
+#define SUBSYS_1003XXXX		13
+#define SUBSYS_1004XXXX		14
+#define SUBSYS_1005XXXX		15
+#define SUBSYS_1020XXXX		16
+#define SUBSYS_1028XXXX		17
+#define SUBSYS_1700XXXX		18
+#define SUBSYS_1701XXXX		19
+#define SUBSYS_1702XXXX		20
+#define SUBSYS_1703XXXX		21
+#define SUBSYS_1800XXXX		22
+#define SUBSYS_1801XXXX		23
+#define SUBSYS_1802XXXX		24
+#define SUBSYS_1804XXXX		25
+#define SUBSYS_1805XXXX		26
+#define SUBSYS_1808XXXX		27
+#define SUBSYS_180aXXXX		28
+#define SUBSYS_180bXXXX		29
+
+#define CMDQ_EVENT_DISP_RDMA0_SOF					0
+#define CMDQ_EVENT_DISP_RDMA1_SOF					1
+#define CMDQ_EVENT_MDP_RDMA0_SOF					2
+#define CMDQ_EVENT_MDP_RSZ0_SOF						4
+#define CMDQ_EVENT_MDP_RSZ1_SOF						5
+#define CMDQ_EVENT_MDP_TDSHP_SOF					6
+#define CMDQ_EVENT_MDP_WROT0_SOF					7
+#define CMDQ_EVENT_MDP_WDMA0_SOF					8
+#define CMDQ_EVENT_DISP_OVL0_SOF					9
+#define CMDQ_EVENT_DISP_OVL0_2L_SOF					10
+#define CMDQ_EVENT_DISP_OVL1_2L_SOF					11
+#define CMDQ_EVENT_DISP_WDMA0_SOF					12
+#define CMDQ_EVENT_DISP_COLOR0_SOF					13
+#define CMDQ_EVENT_DISP_CCORR0_SOF					14
+#define CMDQ_EVENT_DISP_AAL0_SOF					15
+#define CMDQ_EVENT_DISP_GAMMA0_SOF					16
+#define CMDQ_EVENT_DISP_DITHER0_SOF					17
+#define CMDQ_EVENT_DISP_PWM0_SOF					18
+#define CMDQ_EVENT_DISP_DSI0_SOF					19
+#define CMDQ_EVENT_DISP_DPI0_SOF					20
+#define CMDQ_EVENT_DISP_RSZ_SOF						22
+#define CMDQ_EVENT_MDP_AAL_SOF						23
+#define CMDQ_EVENT_MDP_CCORR_SOF					24
+#define CMDQ_EVENT_DISP_DBI_SOF						25
+#define CMDQ_EVENT_DISP_RDMA0_EOF					26
+#define CMDQ_EVENT_DISP_RDMA1_EOF					27
+#define CMDQ_EVENT_MDP_RDMA0_EOF					28
+#define CMDQ_EVENT_MDP_RSZ0_EOF						30
+#define CMDQ_EVENT_MDP_RSZ1_EOF						31
+#define CMDQ_EVENT_MDP_TDSHP_EOF					32
+#define CMDQ_EVENT_MDP_WROT0_EOF					33
+#define CMDQ_EVENT_MDP_WDMA0_EOF					34
+#define CMDQ_EVENT_DISP_OVL0_EOF					35
+#define CMDQ_EVENT_DISP_OVL0_2L_EOF					36
+#define CMDQ_EVENT_DISP_OVL1_2L_EOF					37
+#define CMDQ_EVENT_DISP_WDMA0_EOF					38
+#define CMDQ_EVENT_DISP_COLOR0_EOF					39
+#define CMDQ_EVENT_DISP_CCORR0_EOF					40
+#define CMDQ_EVENT_DISP_AAL0_EOF					41
+#define CMDQ_EVENT_DISP_GAMMA0_EOF					42
+#define CMDQ_EVENT_DISP_DITHER0_EOF					43
+#define CMDQ_EVENT_DSI0_EOF						44
+#define CMDQ_EVENT_DPI0_EOF						45
+#define CMDQ_EVENT_DISP_RSZ_EOF						47
+#define CMDQ_EVENT_MDP_AAL_EOF						48
+#define CMDQ_EVENT_MDP_CCORR_EOF					49
+#define CMDQ_EVENT_DBI_EOF						50
+#define CMDQ_EVENT_MUTEX_STREAM_DONE0					130
+#define CMDQ_EVENT_MUTEX_STREAM_DONE1					131
+#define CMDQ_EVENT_MUTEX_STREAM_DONE2					132
+#define CMDQ_EVENT_MUTEX_STREAM_DONE3					133
+#define CMDQ_EVENT_MUTEX_STREAM_DONE4					134
+#define CMDQ_EVENT_MUTEX_STREAM_DONE5					135
+#define CMDQ_EVENT_MUTEX_STREAM_DONE6					136
+#define CMDQ_EVENT_MUTEX_STREAM_DONE7					137
+#define CMDQ_EVENT_MUTEX_STREAM_DONE8					138
+#define CMDQ_EVENT_MUTEX_STREAM_DONE9					139
+#define CMDQ_EVENT_MUTEX_STREAM_DONE10					140
+#define CMDQ_EVENT_MUTEX_STREAM_DONE11					141
+#define CMDQ_EVENT_DISP_RDMA0_BUF_UNDERRUN_EVEN				142
+#define CMDQ_EVENT_DISP_RDMA1_BUF_UNDERRUN_EVEN				143
+#define CMDQ_EVENT_DSI0_TE_EVENT					144
+#define CMDQ_EVENT_DSI0_IRQ_EVENT					145
+#define CMDQ_EVENT_DSI0_DONE_EVENT					146
+#define CMDQ_EVENT_DISP_WDMA0_SW_RST_DONE				150
+#define CMDQ_EVENT_MDP_WDMA_SW_RST_DONE					151
+#define CMDQ_EVENT_MDP_WROT0_SW_RST_DONE				152
+#define CMDQ_EVENT_MDP_RDMA0_SW_RST_DONE				154
+#define CMDQ_EVENT_DISP_OVL0_FRAME_RST_DONE_PULE			155
+#define CMDQ_EVENT_DISP_OVL0_2L_FRAME_RST_DONE_ULSE			156
+#define CMDQ_EVENT_DISP_OVL1_2L_FRAME_RST_DONE_ULSE			157
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_0					257
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_1					258
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_2					259
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_3					260
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_4					261
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_5					262
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_6					263
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_7					264
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_8					265
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_9					266
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_10					267
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_11					268
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_12					269
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_13					270
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_14					271
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_15					272
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_16					273
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_17					274
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_18					275
+#define CMDQ_EVENT_AMD_FRAME_DONE					276
+#define CMDQ_EVENT_DVE_DONE						277
+#define CMDQ_EVENT_WMFE_DONE						278
+#define CMDQ_EVENT_RSC_DONE						279
+#define CMDQ_EVENT_MFB_DONE						280
+#define CMDQ_EVENT_WPE_A_DONE						281
+#define CMDQ_EVENT_SPE_B_DONE						282
+#define CMDQ_EVENT_OCC_DONE						283
+#define CMDQ_EVENT_VENC_CMDQ_FRAME_DONE					289
+#define CMDQ_EVENT_JPG_ENC_CMDQ_DONE					290
+#define CMDQ_EVENT_JPG_DEC_CMDQ_DONE					291
+#define CMDQ_EVENT_VENC_CMDQ_MB_DONE					292
+#define CMDQ_EVENT_VENC_CMDQ_128BYTE_DONE				293
+#define CMDQ_EVENT_ISP_FRAME_DONE_A					321
+#define CMDQ_EVENT_ISP_FRAME_DONE_B					322
+#define CMDQ_EVENT_CAMSV0_PASS1_DONE					323
+#define CMDQ_EVENT_CAMSV1_PASS1_DONE					324
+#define CMDQ_EVENT_CAMSV2_PASS1_DONE					325
+#define CMDQ_EVENT_TSF_DONE						326
+#define CMDQ_EVENT_SENINF_CAM0_FIFO_FULL				327
+#define CMDQ_EVENT_SENINF_CAM1_FIFO_FULL				328
+#define CMDQ_EVENT_SENINF_CAM2_FIFO_FULL				329
+#define CMDQ_EVENT_SENINF_CAM3_FIFO_FULL				330
+#define CMDQ_EVENT_SENINF_CAM4_FIFO_FULL				331
+#define CMDQ_EVENT_SENINF_CAM5_FIFO_FULL				332
+#define CMDQ_EVENT_SENINF_CAM6_FIFO_FULL				333
+#define CMDQ_EVENT_SENINF_CAM7_FIFO_FULL				334
+#define CMDQ_EVENT_IPU_CORE0_DONE0					353
+#define CMDQ_EVENT_IPU_CORE0_DONE1					354
+#define CMDQ_EVENT_IPU_CORE0_DONE2					355
+#define CMDQ_EVENT_IPU_CORE0_DONE3					356
+#define CMDQ_EVENT_IPU_CORE1_DONE0					385
+#define CMDQ_EVENT_IPU_CORE1_DONE1					386
+#define CMDQ_EVENT_IPU_CORE1_DONE2					387
+#define CMDQ_EVENT_IPU_CORE1_DONE3					388
+
+#endif
-- 
1.9.1

[PATCH v2 01/10] dt-binding: gce: add gce header file for mt8183

[Bibby Hsieh]

Add documentation for the mt8183 gce.

Add gce header file defined the gce hardware event,
subsys number and constant for mt8183.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mailbox/mtk-gce.txt        |   6 +-
 include/dt-bindings/gce/mt8183-gce.h               | 177 +++++++++++++++++++++
 2 files changed, 180 insertions(+), 3 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt8183-gce.h

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 7d72b21..9c0d982 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -9,7 +9,7 @@ CMDQ driver uses mailbox framework for communication. Please refer to
 mailbox.txt for generic information about mailbox device-tree bindings.
 
 Required properties:
-- compatible: Must be "mediatek,mt8173-gce"
+- compatible: can be "mediatek,mt8173-gce" or "mediatek,mt8183-gce"
 - reg: Address range of the GCE unit
 - interrupts: The interrupt signal from the GCE block
 - clock: Clocks according to the common clock binding
@@ -28,8 +28,8 @@ Required properties for a client device:
 - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
   to the register address.
 
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as
-sub-system ids, thread priority, event ids.
+Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
+or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
 
 Example:
 
diff --git a/include/dt-bindings/gce/mt8183-gce.h b/include/dt-bindings/gce/mt8183-gce.h
new file mode 100644
index 0000000..aeb9515
--- /dev/null
+++ b/include/dt-bindings/gce/mt8183-gce.h
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Bibby Hsieh <bibby.hsieh@mediatek.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_GCE_MT8183_H
+#define _DT_BINDINGS_GCE_MT8183_H
+
+#define CMDQ_NO_TIMEOUT		0xffffffff
+
+#define CMDQ_THR_MAX_COUNT	24
+
+/* GCE HW thread priority */
+#define CMDQ_THR_PRIO_LOWEST	0
+#define CMDQ_THR_PRIO_HIGHEST	1
+
+/* GCE SUBSYS */
+#define SUBSYS_1300XXXX		0
+#define SUBSYS_1400XXXX		1
+#define SUBSYS_1401XXXX		2
+#define SUBSYS_1402XXXX		3
+#define SUBSYS_1502XXXX		4
+#define SUBSYS_1880XXXX		5
+#define SUBSYS_1881XXXX		6
+#define SUBSYS_1882XXXX		7
+#define SUBSYS_1883XXXX		8
+#define SUBSYS_1884XXXX		9
+#define SUBSYS_1000XXXX		10
+#define SUBSYS_1001XXXX		11
+#define SUBSYS_1002XXXX		12
+#define SUBSYS_1003XXXX		13
+#define SUBSYS_1004XXXX		14
+#define SUBSYS_1005XXXX		15
+#define SUBSYS_1020XXXX		16
+#define SUBSYS_1028XXXX		17
+#define SUBSYS_1700XXXX		18
+#define SUBSYS_1701XXXX		19
+#define SUBSYS_1702XXXX		20
+#define SUBSYS_1703XXXX		21
+#define SUBSYS_1800XXXX		22
+#define SUBSYS_1801XXXX		23
+#define SUBSYS_1802XXXX		24
+#define SUBSYS_1804XXXX		25
+#define SUBSYS_1805XXXX		26
+#define SUBSYS_1808XXXX		27
+#define SUBSYS_180aXXXX		28
+#define SUBSYS_180bXXXX		29
+
+#define CMDQ_EVENT_DISP_RDMA0_SOF					0
+#define CMDQ_EVENT_DISP_RDMA1_SOF					1
+#define CMDQ_EVENT_MDP_RDMA0_SOF					2
+#define CMDQ_EVENT_MDP_RSZ0_SOF						4
+#define CMDQ_EVENT_MDP_RSZ1_SOF						5
+#define CMDQ_EVENT_MDP_TDSHP_SOF					6
+#define CMDQ_EVENT_MDP_WROT0_SOF					7
+#define CMDQ_EVENT_MDP_WDMA0_SOF					8
+#define CMDQ_EVENT_DISP_OVL0_SOF					9
+#define CMDQ_EVENT_DISP_OVL0_2L_SOF					10
+#define CMDQ_EVENT_DISP_OVL1_2L_SOF					11
+#define CMDQ_EVENT_DISP_WDMA0_SOF					12
+#define CMDQ_EVENT_DISP_COLOR0_SOF					13
+#define CMDQ_EVENT_DISP_CCORR0_SOF					14
+#define CMDQ_EVENT_DISP_AAL0_SOF					15
+#define CMDQ_EVENT_DISP_GAMMA0_SOF					16
+#define CMDQ_EVENT_DISP_DITHER0_SOF					17
+#define CMDQ_EVENT_DISP_PWM0_SOF					18
+#define CMDQ_EVENT_DISP_DSI0_SOF					19
+#define CMDQ_EVENT_DISP_DPI0_SOF					20
+#define CMDQ_EVENT_DISP_RSZ_SOF						22
+#define CMDQ_EVENT_MDP_AAL_SOF						23
+#define CMDQ_EVENT_MDP_CCORR_SOF					24
+#define CMDQ_EVENT_DISP_DBI_SOF						25
+#define CMDQ_EVENT_DISP_RDMA0_EOF					26
+#define CMDQ_EVENT_DISP_RDMA1_EOF					27
+#define CMDQ_EVENT_MDP_RDMA0_EOF					28
+#define CMDQ_EVENT_MDP_RSZ0_EOF						30
+#define CMDQ_EVENT_MDP_RSZ1_EOF						31
+#define CMDQ_EVENT_MDP_TDSHP_EOF					32
+#define CMDQ_EVENT_MDP_WROT0_EOF					33
+#define CMDQ_EVENT_MDP_WDMA0_EOF					34
+#define CMDQ_EVENT_DISP_OVL0_EOF					35
+#define CMDQ_EVENT_DISP_OVL0_2L_EOF					36
+#define CMDQ_EVENT_DISP_OVL1_2L_EOF					37
+#define CMDQ_EVENT_DISP_WDMA0_EOF					38
+#define CMDQ_EVENT_DISP_COLOR0_EOF					39
+#define CMDQ_EVENT_DISP_CCORR0_EOF					40
+#define CMDQ_EVENT_DISP_AAL0_EOF					41
+#define CMDQ_EVENT_DISP_GAMMA0_EOF					42
+#define CMDQ_EVENT_DISP_DITHER0_EOF					43
+#define CMDQ_EVENT_DSI0_EOF						44
+#define CMDQ_EVENT_DPI0_EOF						45
+#define CMDQ_EVENT_DISP_RSZ_EOF						47
+#define CMDQ_EVENT_MDP_AAL_EOF						48
+#define CMDQ_EVENT_MDP_CCORR_EOF					49
+#define CMDQ_EVENT_DBI_EOF						50
+#define CMDQ_EVENT_MUTEX_STREAM_DONE0					130
+#define CMDQ_EVENT_MUTEX_STREAM_DONE1					131
+#define CMDQ_EVENT_MUTEX_STREAM_DONE2					132
+#define CMDQ_EVENT_MUTEX_STREAM_DONE3					133
+#define CMDQ_EVENT_MUTEX_STREAM_DONE4					134
+#define CMDQ_EVENT_MUTEX_STREAM_DONE5					135
+#define CMDQ_EVENT_MUTEX_STREAM_DONE6					136
+#define CMDQ_EVENT_MUTEX_STREAM_DONE7					137
+#define CMDQ_EVENT_MUTEX_STREAM_DONE8					138
+#define CMDQ_EVENT_MUTEX_STREAM_DONE9					139
+#define CMDQ_EVENT_MUTEX_STREAM_DONE10					140
+#define CMDQ_EVENT_MUTEX_STREAM_DONE11					141
+#define CMDQ_EVENT_DISP_RDMA0_BUF_UNDERRUN_EVEN				142
+#define CMDQ_EVENT_DISP_RDMA1_BUF_UNDERRUN_EVEN				143
+#define CMDQ_EVENT_DSI0_TE_EVENT					144
+#define CMDQ_EVENT_DSI0_IRQ_EVENT					145
+#define CMDQ_EVENT_DSI0_DONE_EVENT					146
+#define CMDQ_EVENT_DISP_WDMA0_SW_RST_DONE				150
+#define CMDQ_EVENT_MDP_WDMA_SW_RST_DONE					151
+#define CMDQ_EVENT_MDP_WROT0_SW_RST_DONE				152
+#define CMDQ_EVENT_MDP_RDMA0_SW_RST_DONE				154
+#define CMDQ_EVENT_DISP_OVL0_FRAME_RST_DONE_PULE			155
+#define CMDQ_EVENT_DISP_OVL0_2L_FRAME_RST_DONE_ULSE			156
+#define CMDQ_EVENT_DISP_OVL1_2L_FRAME_RST_DONE_ULSE			157
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_0					257
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_1					258
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_2					259
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_3					260
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_4					261
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_5					262
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_6					263
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_7					264
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_8					265
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_9					266
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_10					267
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_11					268
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_12					269
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_13					270
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_14					271
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_15					272
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_16					273
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_17					274
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_18					275
+#define CMDQ_EVENT_AMD_FRAME_DONE					276
+#define CMDQ_EVENT_DVE_DONE						277
+#define CMDQ_EVENT_WMFE_DONE						278
+#define CMDQ_EVENT_RSC_DONE						279
+#define CMDQ_EVENT_MFB_DONE						280
+#define CMDQ_EVENT_WPE_A_DONE						281
+#define CMDQ_EVENT_SPE_B_DONE						282
+#define CMDQ_EVENT_OCC_DONE						283
+#define CMDQ_EVENT_VENC_CMDQ_FRAME_DONE					289
+#define CMDQ_EVENT_JPG_ENC_CMDQ_DONE					290
+#define CMDQ_EVENT_JPG_DEC_CMDQ_DONE					291
+#define CMDQ_EVENT_VENC_CMDQ_MB_DONE					292
+#define CMDQ_EVENT_VENC_CMDQ_128BYTE_DONE				293
+#define CMDQ_EVENT_ISP_FRAME_DONE_A					321
+#define CMDQ_EVENT_ISP_FRAME_DONE_B					322
+#define CMDQ_EVENT_CAMSV0_PASS1_DONE					323
+#define CMDQ_EVENT_CAMSV1_PASS1_DONE					324
+#define CMDQ_EVENT_CAMSV2_PASS1_DONE					325
+#define CMDQ_EVENT_TSF_DONE						326
+#define CMDQ_EVENT_SENINF_CAM0_FIFO_FULL				327
+#define CMDQ_EVENT_SENINF_CAM1_FIFO_FULL				328
+#define CMDQ_EVENT_SENINF_CAM2_FIFO_FULL				329
+#define CMDQ_EVENT_SENINF_CAM3_FIFO_FULL				330
+#define CMDQ_EVENT_SENINF_CAM4_FIFO_FULL				331
+#define CMDQ_EVENT_SENINF_CAM5_FIFO_FULL				332
+#define CMDQ_EVENT_SENINF_CAM6_FIFO_FULL				333
+#define CMDQ_EVENT_SENINF_CAM7_FIFO_FULL				334
+#define CMDQ_EVENT_IPU_CORE0_DONE0					353
+#define CMDQ_EVENT_IPU_CORE0_DONE1					354
+#define CMDQ_EVENT_IPU_CORE0_DONE2					355
+#define CMDQ_EVENT_IPU_CORE0_DONE3					356
+#define CMDQ_EVENT_IPU_CORE1_DONE0					385
+#define CMDQ_EVENT_IPU_CORE1_DONE1					386
+#define CMDQ_EVENT_IPU_CORE1_DONE2					387
+#define CMDQ_EVENT_IPU_CORE1_DONE3					388
+
+#endif
-- 
1.9.1

[PATCH v2 01/10] dt-binding: gce: add gce header file for mt8183

[Bibby Hsieh]

Add documentation for the mt8183 gce.

Add gce header file defined the gce hardware event,
subsys number and constant for mt8183.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mailbox/mtk-gce.txt        |   6 +-
 include/dt-bindings/gce/mt8183-gce.h               | 177 +++++++++++++++++++++
 2 files changed, 180 insertions(+), 3 deletions(-)
 create mode 100644 include/dt-bindings/gce/mt8183-gce.h

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 7d72b21..9c0d982 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -9,7 +9,7 @@ CMDQ driver uses mailbox framework for communication. Please refer to
 mailbox.txt for generic information about mailbox device-tree bindings.
 
 Required properties:
-- compatible: Must be "mediatek,mt8173-gce"
+- compatible: can be "mediatek,mt8173-gce" or "mediatek,mt8183-gce"
 - reg: Address range of the GCE unit
 - interrupts: The interrupt signal from the GCE block
 - clock: Clocks according to the common clock binding
@@ -28,8 +28,8 @@ Required properties for a client device:
 - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
   to the register address.
 
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as
-sub-system ids, thread priority, event ids.
+Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
+or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
 
 Example:
 
diff --git a/include/dt-bindings/gce/mt8183-gce.h b/include/dt-bindings/gce/mt8183-gce.h
new file mode 100644
index 0000000..aeb9515
--- /dev/null
+++ b/include/dt-bindings/gce/mt8183-gce.h
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Bibby Hsieh <bibby.hsieh@mediatek.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_GCE_MT8183_H
+#define _DT_BINDINGS_GCE_MT8183_H
+
+#define CMDQ_NO_TIMEOUT		0xffffffff
+
+#define CMDQ_THR_MAX_COUNT	24
+
+/* GCE HW thread priority */
+#define CMDQ_THR_PRIO_LOWEST	0
+#define CMDQ_THR_PRIO_HIGHEST	1
+
+/* GCE SUBSYS */
+#define SUBSYS_1300XXXX		0
+#define SUBSYS_1400XXXX		1
+#define SUBSYS_1401XXXX		2
+#define SUBSYS_1402XXXX		3
+#define SUBSYS_1502XXXX		4
+#define SUBSYS_1880XXXX		5
+#define SUBSYS_1881XXXX		6
+#define SUBSYS_1882XXXX		7
+#define SUBSYS_1883XXXX		8
+#define SUBSYS_1884XXXX		9
+#define SUBSYS_1000XXXX		10
+#define SUBSYS_1001XXXX		11
+#define SUBSYS_1002XXXX		12
+#define SUBSYS_1003XXXX		13
+#define SUBSYS_1004XXXX		14
+#define SUBSYS_1005XXXX		15
+#define SUBSYS_1020XXXX		16
+#define SUBSYS_1028XXXX		17
+#define SUBSYS_1700XXXX		18
+#define SUBSYS_1701XXXX		19
+#define SUBSYS_1702XXXX		20
+#define SUBSYS_1703XXXX		21
+#define SUBSYS_1800XXXX		22
+#define SUBSYS_1801XXXX		23
+#define SUBSYS_1802XXXX		24
+#define SUBSYS_1804XXXX		25
+#define SUBSYS_1805XXXX		26
+#define SUBSYS_1808XXXX		27
+#define SUBSYS_180aXXXX		28
+#define SUBSYS_180bXXXX		29
+
+#define CMDQ_EVENT_DISP_RDMA0_SOF					0
+#define CMDQ_EVENT_DISP_RDMA1_SOF					1
+#define CMDQ_EVENT_MDP_RDMA0_SOF					2
+#define CMDQ_EVENT_MDP_RSZ0_SOF						4
+#define CMDQ_EVENT_MDP_RSZ1_SOF						5
+#define CMDQ_EVENT_MDP_TDSHP_SOF					6
+#define CMDQ_EVENT_MDP_WROT0_SOF					7
+#define CMDQ_EVENT_MDP_WDMA0_SOF					8
+#define CMDQ_EVENT_DISP_OVL0_SOF					9
+#define CMDQ_EVENT_DISP_OVL0_2L_SOF					10
+#define CMDQ_EVENT_DISP_OVL1_2L_SOF					11
+#define CMDQ_EVENT_DISP_WDMA0_SOF					12
+#define CMDQ_EVENT_DISP_COLOR0_SOF					13
+#define CMDQ_EVENT_DISP_CCORR0_SOF					14
+#define CMDQ_EVENT_DISP_AAL0_SOF					15
+#define CMDQ_EVENT_DISP_GAMMA0_SOF					16
+#define CMDQ_EVENT_DISP_DITHER0_SOF					17
+#define CMDQ_EVENT_DISP_PWM0_SOF					18
+#define CMDQ_EVENT_DISP_DSI0_SOF					19
+#define CMDQ_EVENT_DISP_DPI0_SOF					20
+#define CMDQ_EVENT_DISP_RSZ_SOF						22
+#define CMDQ_EVENT_MDP_AAL_SOF						23
+#define CMDQ_EVENT_MDP_CCORR_SOF					24
+#define CMDQ_EVENT_DISP_DBI_SOF						25
+#define CMDQ_EVENT_DISP_RDMA0_EOF					26
+#define CMDQ_EVENT_DISP_RDMA1_EOF					27
+#define CMDQ_EVENT_MDP_RDMA0_EOF					28
+#define CMDQ_EVENT_MDP_RSZ0_EOF						30
+#define CMDQ_EVENT_MDP_RSZ1_EOF						31
+#define CMDQ_EVENT_MDP_TDSHP_EOF					32
+#define CMDQ_EVENT_MDP_WROT0_EOF					33
+#define CMDQ_EVENT_MDP_WDMA0_EOF					34
+#define CMDQ_EVENT_DISP_OVL0_EOF					35
+#define CMDQ_EVENT_DISP_OVL0_2L_EOF					36
+#define CMDQ_EVENT_DISP_OVL1_2L_EOF					37
+#define CMDQ_EVENT_DISP_WDMA0_EOF					38
+#define CMDQ_EVENT_DISP_COLOR0_EOF					39
+#define CMDQ_EVENT_DISP_CCORR0_EOF					40
+#define CMDQ_EVENT_DISP_AAL0_EOF					41
+#define CMDQ_EVENT_DISP_GAMMA0_EOF					42
+#define CMDQ_EVENT_DISP_DITHER0_EOF					43
+#define CMDQ_EVENT_DSI0_EOF						44
+#define CMDQ_EVENT_DPI0_EOF						45
+#define CMDQ_EVENT_DISP_RSZ_EOF						47
+#define CMDQ_EVENT_MDP_AAL_EOF						48
+#define CMDQ_EVENT_MDP_CCORR_EOF					49
+#define CMDQ_EVENT_DBI_EOF						50
+#define CMDQ_EVENT_MUTEX_STREAM_DONE0					130
+#define CMDQ_EVENT_MUTEX_STREAM_DONE1					131
+#define CMDQ_EVENT_MUTEX_STREAM_DONE2					132
+#define CMDQ_EVENT_MUTEX_STREAM_DONE3					133
+#define CMDQ_EVENT_MUTEX_STREAM_DONE4					134
+#define CMDQ_EVENT_MUTEX_STREAM_DONE5					135
+#define CMDQ_EVENT_MUTEX_STREAM_DONE6					136
+#define CMDQ_EVENT_MUTEX_STREAM_DONE7					137
+#define CMDQ_EVENT_MUTEX_STREAM_DONE8					138
+#define CMDQ_EVENT_MUTEX_STREAM_DONE9					139
+#define CMDQ_EVENT_MUTEX_STREAM_DONE10					140
+#define CMDQ_EVENT_MUTEX_STREAM_DONE11					141
+#define CMDQ_EVENT_DISP_RDMA0_BUF_UNDERRUN_EVEN				142
+#define CMDQ_EVENT_DISP_RDMA1_BUF_UNDERRUN_EVEN				143
+#define CMDQ_EVENT_DSI0_TE_EVENT					144
+#define CMDQ_EVENT_DSI0_IRQ_EVENT					145
+#define CMDQ_EVENT_DSI0_DONE_EVENT					146
+#define CMDQ_EVENT_DISP_WDMA0_SW_RST_DONE				150
+#define CMDQ_EVENT_MDP_WDMA_SW_RST_DONE					151
+#define CMDQ_EVENT_MDP_WROT0_SW_RST_DONE				152
+#define CMDQ_EVENT_MDP_RDMA0_SW_RST_DONE				154
+#define CMDQ_EVENT_DISP_OVL0_FRAME_RST_DONE_PULE			155
+#define CMDQ_EVENT_DISP_OVL0_2L_FRAME_RST_DONE_ULSE			156
+#define CMDQ_EVENT_DISP_OVL1_2L_FRAME_RST_DONE_ULSE			157
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_0					257
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_1					258
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_2					259
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_3					260
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_4					261
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_5					262
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_6					263
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_7					264
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_8					265
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_9					266
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_10					267
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_11					268
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_12					269
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_13					270
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_14					271
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_15					272
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_16					273
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_17					274
+#define CMDQ_EVENT_ISP_FRAME_DONE_P2_18					275
+#define CMDQ_EVENT_AMD_FRAME_DONE					276
+#define CMDQ_EVENT_DVE_DONE						277
+#define CMDQ_EVENT_WMFE_DONE						278
+#define CMDQ_EVENT_RSC_DONE						279
+#define CMDQ_EVENT_MFB_DONE						280
+#define CMDQ_EVENT_WPE_A_DONE						281
+#define CMDQ_EVENT_SPE_B_DONE						282
+#define CMDQ_EVENT_OCC_DONE						283
+#define CMDQ_EVENT_VENC_CMDQ_FRAME_DONE					289
+#define CMDQ_EVENT_JPG_ENC_CMDQ_DONE					290
+#define CMDQ_EVENT_JPG_DEC_CMDQ_DONE					291
+#define CMDQ_EVENT_VENC_CMDQ_MB_DONE					292
+#define CMDQ_EVENT_VENC_CMDQ_128BYTE_DONE				293
+#define CMDQ_EVENT_ISP_FRAME_DONE_A					321
+#define CMDQ_EVENT_ISP_FRAME_DONE_B					322
+#define CMDQ_EVENT_CAMSV0_PASS1_DONE					323
+#define CMDQ_EVENT_CAMSV1_PASS1_DONE					324
+#define CMDQ_EVENT_CAMSV2_PASS1_DONE					325
+#define CMDQ_EVENT_TSF_DONE						326
+#define CMDQ_EVENT_SENINF_CAM0_FIFO_FULL				327
+#define CMDQ_EVENT_SENINF_CAM1_FIFO_FULL				328
+#define CMDQ_EVENT_SENINF_CAM2_FIFO_FULL				329
+#define CMDQ_EVENT_SENINF_CAM3_FIFO_FULL				330
+#define CMDQ_EVENT_SENINF_CAM4_FIFO_FULL				331
+#define CMDQ_EVENT_SENINF_CAM5_FIFO_FULL				332
+#define CMDQ_EVENT_SENINF_CAM6_FIFO_FULL				333
+#define CMDQ_EVENT_SENINF_CAM7_FIFO_FULL				334
+#define CMDQ_EVENT_IPU_CORE0_DONE0					353
+#define CMDQ_EVENT_IPU_CORE0_DONE1					354
+#define CMDQ_EVENT_IPU_CORE0_DONE2					355
+#define CMDQ_EVENT_IPU_CORE0_DONE3					356
+#define CMDQ_EVENT_IPU_CORE1_DONE0					385
+#define CMDQ_EVENT_IPU_CORE1_DONE1					386
+#define CMDQ_EVENT_IPU_CORE1_DONE2					387
+#define CMDQ_EVENT_IPU_CORE1_DONE3					388
+
+#endif
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 02/10] dt-binding: gce: add binding for gce event property

[Bibby Hsieh]

cmdq driver provide a function that get event number
from device node for client.
add specification for #event-cells,
mediatek,gce-event-names, mediatek,gce-events.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 9c0d982..812698f 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -21,12 +21,20 @@ Required properties:
 	priority: Priority of GCE thread.
 	atomic_exec: GCE processing continuous packets of commands in atomic
 		way.
+- #event-cells: Should be 1.
+	<&phandle event_number>
+	phandle: Label name of a gce node.
+	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
+		      or 'dt-binding/gce/mt8183-gce.h'.
 
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
   property and list of phandle, mailbox specifiers.
 - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
   to the register address.
+- mediatek,gce-event-names: the event name can be defined by user.
+- mediatek,gce-events: u32, the event number defined in
+  'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'.
 
 Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
 or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
@@ -41,6 +49,7 @@ Example:
 		clock-names = "gce";
 		thread-num = CMDQ_THR_MAX_COUNT;
 		#mbox-cells = <3>;
+		#event-cells = <1>;
 	};
 
 Example for a client device:
@@ -50,8 +59,9 @@ Example for a client device:
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
 		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-
+		mediatek,gce-event-names = "rdma0_sof",
+					   "rsz0_sof";
+		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
+				      <&gce CMDQ_EVENT_MDP_RSZ0_SOF>;
 		...
 	};
-- 
1.9.1

[PATCH v2 02/10] dt-binding: gce: add binding for gce event property

[Bibby Hsieh]

cmdq driver provide a function that get event number
from device node for client.
add specification for #event-cells,
mediatek,gce-event-names, mediatek,gce-events.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 9c0d982..812698f 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -21,12 +21,20 @@ Required properties:
 	priority: Priority of GCE thread.
 	atomic_exec: GCE processing continuous packets of commands in atomic
 		way.
+- #event-cells: Should be 1.
+	<&phandle event_number>
+	phandle: Label name of a gce node.
+	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
+		      or 'dt-binding/gce/mt8183-gce.h'.
 
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
   property and list of phandle, mailbox specifiers.
 - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
   to the register address.
+- mediatek,gce-event-names: the event name can be defined by user.
+- mediatek,gce-events: u32, the event number defined in
+  'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'.
 
 Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
 or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
@@ -41,6 +49,7 @@ Example:
 		clock-names = "gce";
 		thread-num = CMDQ_THR_MAX_COUNT;
 		#mbox-cells = <3>;
+		#event-cells = <1>;
 	};
 
 Example for a client device:
@@ -50,8 +59,9 @@ Example for a client device:
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
 		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-
+		mediatek,gce-event-names = "rdma0_sof",
+					   "rsz0_sof";
+		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
+				      <&gce CMDQ_EVENT_MDP_RSZ0_SOF>;
 		...
 	};
-- 
1.9.1

[PATCH v2 02/10] dt-binding: gce: add binding for gce event property

[Bibby Hsieh]

cmdq driver provide a function that get event number
from device node for client.
add specification for #event-cells,
mediatek,gce-event-names, mediatek,gce-events.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 9c0d982..812698f 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -21,12 +21,20 @@ Required properties:
 	priority: Priority of GCE thread.
 	atomic_exec: GCE processing continuous packets of commands in atomic
 		way.
+- #event-cells: Should be 1.
+	<&phandle event_number>
+	phandle: Label name of a gce node.
+	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
+		      or 'dt-binding/gce/mt8183-gce.h'.
 
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
   property and list of phandle, mailbox specifiers.
 - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
   to the register address.
+- mediatek,gce-event-names: the event name can be defined by user.
+- mediatek,gce-events: u32, the event number defined in
+  'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'.
 
 Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
 or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
@@ -41,6 +49,7 @@ Example:
 		clock-names = "gce";
 		thread-num = CMDQ_THR_MAX_COUNT;
 		#mbox-cells = <3>;
+		#event-cells = <1>;
 	};
 
 Example for a client device:
@@ -50,8 +59,9 @@ Example for a client device:
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
 		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-
+		mediatek,gce-event-names = "rdma0_sof",
+					   "rsz0_sof";
+		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
+				      <&gce CMDQ_EVENT_MDP_RSZ0_SOF>;
 		...
 	};
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 02/10] dt-binding: gce: add binding for gce event property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get event number
> from device node for client.

I think device tree is based on the view of hardware design, so you need
not to mention how the driver design. 

Client hardware would send event to GCE hardware, so this property
present this event.


> add specification for #event-cells,
> mediatek,gce-event-names, mediatek,gce-events.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 9c0d982..812698f 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -21,12 +21,20 @@ Required properties:
>  	priority: Priority of GCE thread.
>  	atomic_exec: GCE processing continuous packets of commands in atomic
>  		way.
> +- #event-cells: Should be 1.
> +	<&phandle event_number>
> +	phandle: Label name of a gce node.
> +	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
> +		      or 'dt-binding/gce/mt8183-gce.h'.
>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
>    property and list of phandle, mailbox specifiers.
>  - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
>    to the register address.
> +- mediatek,gce-event-names: the event name can be defined by user.
> +- mediatek,gce-events: u32, the event number defined in
> +  'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'.

I think both gce-subsys and gce-event are optional and depend on the
hardware design.

Regards,
CK

>  
>  Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
>  or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
> @@ -41,6 +49,7 @@ Example:
>  		clock-names = "gce";
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
> +		#event-cells = <1>;
>  	};
>  
>  Example for a client device:
> @@ -50,8 +59,9 @@ Example for a client device:
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
>  		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> -		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
> -				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
> -
> +		mediatek,gce-event-names = "rdma0_sof",
> +					   "rsz0_sof";
> +		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> +				      <&gce CMDQ_EVENT_MDP_RSZ0_SOF>;
>  		...
>  	};

Re: [PATCH v2 02/10] dt-binding: gce: add binding for gce event property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get event number
> from device node for client.

I think device tree is based on the view of hardware design, so you need
not to mention how the driver design. 

Client hardware would send event to GCE hardware, so this property
present this event.


> add specification for #event-cells,
> mediatek,gce-event-names, mediatek,gce-events.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 9c0d982..812698f 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -21,12 +21,20 @@ Required properties:
>  	priority: Priority of GCE thread.
>  	atomic_exec: GCE processing continuous packets of commands in atomic
>  		way.
> +- #event-cells: Should be 1.
> +	<&phandle event_number>
> +	phandle: Label name of a gce node.
> +	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
> +		      or 'dt-binding/gce/mt8183-gce.h'.
>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
>    property and list of phandle, mailbox specifiers.
>  - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
>    to the register address.
> +- mediatek,gce-event-names: the event name can be defined by user.
> +- mediatek,gce-events: u32, the event number defined in
> +  'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'.

I think both gce-subsys and gce-event are optional and depend on the
hardware design.

Regards,
CK

>  
>  Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
>  or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
> @@ -41,6 +49,7 @@ Example:
>  		clock-names = "gce";
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
> +		#event-cells = <1>;
>  	};
>  
>  Example for a client device:
> @@ -50,8 +59,9 @@ Example for a client device:
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
>  		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> -		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
> -				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
> -
> +		mediatek,gce-event-names = "rdma0_sof",
> +					   "rsz0_sof";
> +		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> +				      <&gce CMDQ_EVENT_MDP_RSZ0_SOF>;
>  		...
>  	};

Re: [PATCH v2 02/10] dt-binding: gce: add binding for gce event property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get event number
> from device node for client.

I think device tree is based on the view of hardware design, so you need
not to mention how the driver design. 

Client hardware would send event to GCE hardware, so this property
present this event.


> add specification for #event-cells,
> mediatek,gce-event-names, mediatek,gce-events.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 9c0d982..812698f 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -21,12 +21,20 @@ Required properties:
>  	priority: Priority of GCE thread.
>  	atomic_exec: GCE processing continuous packets of commands in atomic
>  		way.
> +- #event-cells: Should be 1.
> +	<&phandle event_number>
> +	phandle: Label name of a gce node.
> +	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
> +		      or 'dt-binding/gce/mt8183-gce.h'.
>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
>    property and list of phandle, mailbox specifiers.
>  - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
>    to the register address.
> +- mediatek,gce-event-names: the event name can be defined by user.
> +- mediatek,gce-events: u32, the event number defined in
> +  'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'.

I think both gce-subsys and gce-event are optional and depend on the
hardware design.

Regards,
CK

>  
>  Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
>  or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
> @@ -41,6 +49,7 @@ Example:
>  		clock-names = "gce";
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
> +		#event-cells = <1>;
>  	};
>  
>  Example for a client device:
> @@ -50,8 +59,9 @@ Example for a client device:
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
>  		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> -		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
> -				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
> -
> +		mediatek,gce-event-names = "rdma0_sof",
> +					   "rsz0_sof";
> +		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> +				      <&gce CMDQ_EVENT_MDP_RSZ0_SOF>;
>  		...
>  	};



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[Bibby Hsieh]

cmdq driver provide a function that get the relationship
of sub system number from device node for client.
add specification for #subsys-cells, mediatek,gce-subsys.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 812698f..07b2adf 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -26,6 +26,13 @@ Required properties:
 	phandle: Label name of a gce node.
 	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
 		      or 'dt-binding/gce/mt8183-gce.h'.
+#subsys-cells: Should be 2.
+	<&phandle register_base_address subsys_number>
+	phandle: Label name of a gce node.
+	register_base_address: the register base address that client
+			       want to write or read.
+	subsys_number: specify the sub-system id which is corresponding
+		       to the register address.
 
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
@@ -50,6 +57,7 @@ Example:
 		thread-num = CMDQ_THR_MAX_COUNT;
 		#mbox-cells = <3>;
 		#event-cells = <1>;
+		#subsys-cells = <2>;
 	};
 
 Example for a client device:
@@ -58,7 +66,8 @@ Example for a client device:
 		compatible = "mediatek,mt8173-mmsys";
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
-		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
+		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+				      <&gce 0x14010000 SUBSYS_1401XXXX>;
 		mediatek,gce-event-names = "rdma0_sof",
 					   "rsz0_sof";
 		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
-- 
1.9.1

[PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[Bibby Hsieh]

cmdq driver provide a function that get the relationship
of sub system number from device node for client.
add specification for #subsys-cells, mediatek,gce-subsys.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 812698f..07b2adf 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -26,6 +26,13 @@ Required properties:
 	phandle: Label name of a gce node.
 	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
 		      or 'dt-binding/gce/mt8183-gce.h'.
+#subsys-cells: Should be 2.
+	<&phandle register_base_address subsys_number>
+	phandle: Label name of a gce node.
+	register_base_address: the register base address that client
+			       want to write or read.
+	subsys_number: specify the sub-system id which is corresponding
+		       to the register address.
 
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
@@ -50,6 +57,7 @@ Example:
 		thread-num = CMDQ_THR_MAX_COUNT;
 		#mbox-cells = <3>;
 		#event-cells = <1>;
+		#subsys-cells = <2>;
 	};
 
 Example for a client device:
@@ -58,7 +66,8 @@ Example for a client device:
 		compatible = "mediatek,mt8173-mmsys";
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
-		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
+		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+				      <&gce 0x14010000 SUBSYS_1401XXXX>;
 		mediatek,gce-event-names = "rdma0_sof",
 					   "rsz0_sof";
 		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
-- 
1.9.1

[PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[Bibby Hsieh]

cmdq driver provide a function that get the relationship
of sub system number from device node for client.
add specification for #subsys-cells, mediatek,gce-subsys.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 812698f..07b2adf 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -26,6 +26,13 @@ Required properties:
 	phandle: Label name of a gce node.
 	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
 		      or 'dt-binding/gce/mt8183-gce.h'.
+#subsys-cells: Should be 2.
+	<&phandle register_base_address subsys_number>
+	phandle: Label name of a gce node.
+	register_base_address: the register base address that client
+			       want to write or read.
+	subsys_number: specify the sub-system id which is corresponding
+		       to the register address.
 
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
@@ -50,6 +57,7 @@ Example:
 		thread-num = CMDQ_THR_MAX_COUNT;
 		#mbox-cells = <3>;
 		#event-cells = <1>;
+		#subsys-cells = <2>;
 	};
 
 Example for a client device:
@@ -58,7 +66,8 @@ Example for a client device:
 		compatible = "mediatek,mt8173-mmsys";
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
-		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
+		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+				      <&gce 0x14010000 SUBSYS_1401XXXX>;
 		mediatek,gce-event-names = "rdma0_sof",
 					   "rsz0_sof";
 		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get the relationship
> of sub system number from device node for client.
> add specification for #subsys-cells, mediatek,gce-subsys.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 812698f..07b2adf 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -26,6 +26,13 @@ Required properties:
>  	phandle: Label name of a gce node.
>  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
>  		      or 'dt-binding/gce/mt8183-gce.h'.
> +#subsys-cells: Should be 2.
> +	<&phandle register_base_address subsys_number>
> +	phandle: Label name of a gce node.
> +	register_base_address: the register base address that client
> +			       want to write or read.

This look like the same as 'reg' property. I would prefer use
already-defined property, for example:

		mmsys: clock-controller@14000000 {
			compatible = "mediatek,mt8173-mmsys", "syscon";
			reg = <0 0x14000000 0 0x1000>;
			mediatek,gce-subsys = <&gce SUBSYS_1400XXXX>;
		};

Regards,
CK

> +	subsys_number: specify the sub-system id which is corresponding
> +		       to the register address.
>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
> @@ -50,6 +57,7 @@ Example:
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
>  		#event-cells = <1>;
> +		#subsys-cells = <2>;
>  	};
>  
>  Example for a client device:
> @@ -58,7 +66,8 @@ Example for a client device:
>  		compatible = "mediatek,mt8173-mmsys";
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
>  		mediatek,gce-event-names = "rdma0_sof",
>  					   "rsz0_sof";
>  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get the relationship
> of sub system number from device node for client.
> add specification for #subsys-cells, mediatek,gce-subsys.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 812698f..07b2adf 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -26,6 +26,13 @@ Required properties:
>  	phandle: Label name of a gce node.
>  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
>  		      or 'dt-binding/gce/mt8183-gce.h'.
> +#subsys-cells: Should be 2.
> +	<&phandle register_base_address subsys_number>
> +	phandle: Label name of a gce node.
> +	register_base_address: the register base address that client
> +			       want to write or read.

This look like the same as 'reg' property. I would prefer use
already-defined property, for example:

		mmsys: clock-controller@14000000 {
			compatible = "mediatek,mt8173-mmsys", "syscon";
			reg = <0 0x14000000 0 0x1000>;
			mediatek,gce-subsys = <&gce SUBSYS_1400XXXX>;
		};

Regards,
CK

> +	subsys_number: specify the sub-system id which is corresponding
> +		       to the register address.
>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
> @@ -50,6 +57,7 @@ Example:
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
>  		#event-cells = <1>;
> +		#subsys-cells = <2>;
>  	};
>  
>  Example for a client device:
> @@ -58,7 +66,8 @@ Example for a client device:
>  		compatible = "mediatek,mt8173-mmsys";
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
>  		mediatek,gce-event-names = "rdma0_sof",
>  					   "rsz0_sof";
>  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get the relationship
> of sub system number from device node for client.
> add specification for #subsys-cells, mediatek,gce-subsys.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 812698f..07b2adf 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -26,6 +26,13 @@ Required properties:
>  	phandle: Label name of a gce node.
>  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
>  		      or 'dt-binding/gce/mt8183-gce.h'.
> +#subsys-cells: Should be 2.
> +	<&phandle register_base_address subsys_number>
> +	phandle: Label name of a gce node.
> +	register_base_address: the register base address that client
> +			       want to write or read.

This look like the same as 'reg' property. I would prefer use
already-defined property, for example:

		mmsys: clock-controller@14000000 {
			compatible = "mediatek,mt8173-mmsys", "syscon";
			reg = <0 0x14000000 0 0x1000>;
			mediatek,gce-subsys = <&gce SUBSYS_1400XXXX>;
		};

Regards,
CK

> +	subsys_number: specify the sub-system id which is corresponding
> +		       to the register address.
>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
> @@ -50,6 +57,7 @@ Example:
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
>  		#event-cells = <1>;
> +		#subsys-cells = <2>;
>  	};
>  
>  Example for a client device:
> @@ -58,7 +66,8 @@ Example for a client device:
>  		compatible = "mediatek,mt8173-mmsys";
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
>  		mediatek,gce-event-names = "rdma0_sof",
>  					   "rsz0_sof";
>  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Thu, 2019-03-07 at 09:39 +0800, CK Hu wrote:
> Hi, Bibby:
> 
> On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> > cmdq driver provide a function that get the relationship
> > of sub system number from device node for client.
> > add specification for #subsys-cells, mediatek,gce-subsys.
> > 
> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > ---
> >  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
> >  1 file changed, 10 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > index 812698f..07b2adf 100644
> > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > @@ -26,6 +26,13 @@ Required properties:
> >  	phandle: Label name of a gce node.
> >  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
> >  		      or 'dt-binding/gce/mt8183-gce.h'.
> > +#subsys-cells: Should be 2.
> > +	<&phandle register_base_address subsys_number>
> > +	phandle: Label name of a gce node.
> > +	register_base_address: the register base address that client
> > +			       want to write or read.
> 
> This look like the same as 'reg' property. I would prefer use
> already-defined property, for example:
> 
> 		mmsys: clock-controller@14000000 {
> 			compatible = "mediatek,mt8173-mmsys", "syscon";
> 			reg = <0 0x14000000 0 0x1000>;
> 			mediatek,gce-subsys = <&gce SUBSYS_1400XXXX>;
> 		};

My previous thinking may not be proper, GCE could write register but its
behavior may be not the same as CPU, so it's better not to mix these two
register_base_address.

Regards,
CK

> 
> Regards,
> CK
> 
> > +	subsys_number: specify the sub-system id which is corresponding
> > +		       to the register address.
> >  
> >  Required properties for a client device:
> >  - mboxes: Client use mailbox to communicate with GCE, it should have this
> > @@ -50,6 +57,7 @@ Example:
> >  		thread-num = CMDQ_THR_MAX_COUNT;
> >  		#mbox-cells = <3>;
> >  		#event-cells = <1>;
> > +		#subsys-cells = <2>;
> >  	};
> >  
> >  Example for a client device:
> > @@ -58,7 +66,8 @@ Example for a client device:
> >  		compatible = "mediatek,mt8173-mmsys";
> >  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
> >  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> > -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> > +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> > +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
> >  		mediatek,gce-event-names = "rdma0_sof",
> >  					   "rsz0_sof";
> >  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> 

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Thu, 2019-03-07 at 09:39 +0800, CK Hu wrote:
> Hi, Bibby:
> 
> On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> > cmdq driver provide a function that get the relationship
> > of sub system number from device node for client.
> > add specification for #subsys-cells, mediatek,gce-subsys.
> > 
> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > ---
> >  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
> >  1 file changed, 10 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > index 812698f..07b2adf 100644
> > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > @@ -26,6 +26,13 @@ Required properties:
> >  	phandle: Label name of a gce node.
> >  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
> >  		      or 'dt-binding/gce/mt8183-gce.h'.
> > +#subsys-cells: Should be 2.
> > +	<&phandle register_base_address subsys_number>
> > +	phandle: Label name of a gce node.
> > +	register_base_address: the register base address that client
> > +			       want to write or read.
> 
> This look like the same as 'reg' property. I would prefer use
> already-defined property, for example:
> 
> 		mmsys: clock-controller@14000000 {
> 			compatible = "mediatek,mt8173-mmsys", "syscon";
> 			reg = <0 0x14000000 0 0x1000>;
> 			mediatek,gce-subsys = <&gce SUBSYS_1400XXXX>;
> 		};

My previous thinking may not be proper, GCE could write register but its
behavior may be not the same as CPU, so it's better not to mix these two
register_base_address.

Regards,
CK

> 
> Regards,
> CK
> 
> > +	subsys_number: specify the sub-system id which is corresponding
> > +		       to the register address.
> >  
> >  Required properties for a client device:
> >  - mboxes: Client use mailbox to communicate with GCE, it should have this
> > @@ -50,6 +57,7 @@ Example:
> >  		thread-num = CMDQ_THR_MAX_COUNT;
> >  		#mbox-cells = <3>;
> >  		#event-cells = <1>;
> > +		#subsys-cells = <2>;
> >  	};
> >  
> >  Example for a client device:
> > @@ -58,7 +66,8 @@ Example for a client device:
> >  		compatible = "mediatek,mt8173-mmsys";
> >  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
> >  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> > -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> > +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> > +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
> >  		mediatek,gce-event-names = "rdma0_sof",
> >  					   "rsz0_sof";
> >  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> 

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Thu, 2019-03-07 at 09:39 +0800, CK Hu wrote:
> Hi, Bibby:
> 
> On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> > cmdq driver provide a function that get the relationship
> > of sub system number from device node for client.
> > add specification for #subsys-cells, mediatek,gce-subsys.
> > 
> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > ---
> >  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
> >  1 file changed, 10 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > index 812698f..07b2adf 100644
> > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> > @@ -26,6 +26,13 @@ Required properties:
> >  	phandle: Label name of a gce node.
> >  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
> >  		      or 'dt-binding/gce/mt8183-gce.h'.
> > +#subsys-cells: Should be 2.
> > +	<&phandle register_base_address subsys_number>
> > +	phandle: Label name of a gce node.
> > +	register_base_address: the register base address that client
> > +			       want to write or read.
> 
> This look like the same as 'reg' property. I would prefer use
> already-defined property, for example:
> 
> 		mmsys: clock-controller@14000000 {
> 			compatible = "mediatek,mt8173-mmsys", "syscon";
> 			reg = <0 0x14000000 0 0x1000>;
> 			mediatek,gce-subsys = <&gce SUBSYS_1400XXXX>;
> 		};

My previous thinking may not be proper, GCE could write register but its
behavior may be not the same as CPU, so it's better not to mix these two
register_base_address.

Regards,
CK

> 
> Regards,
> CK
> 
> > +	subsys_number: specify the sub-system id which is corresponding
> > +		       to the register address.
> >  
> >  Required properties for a client device:
> >  - mboxes: Client use mailbox to communicate with GCE, it should have this
> > @@ -50,6 +57,7 @@ Example:
> >  		thread-num = CMDQ_THR_MAX_COUNT;
> >  		#mbox-cells = <3>;
> >  		#event-cells = <1>;
> > +		#subsys-cells = <2>;
> >  	};
> >  
> >  Example for a client device:
> > @@ -58,7 +66,8 @@ Example for a client device:
> >  		compatible = "mediatek,mt8173-mmsys";
> >  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
> >  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> > -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> > +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> > +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
> >  		mediatek,gce-event-names = "rdma0_sof",
> >  					   "rsz0_sof";
> >  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> 



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get the relationship
> of sub system number from device node for client.
> add specification for #subsys-cells, mediatek,gce-subsys.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 812698f..07b2adf 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -26,6 +26,13 @@ Required properties:
>  	phandle: Label name of a gce node.
>  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
>  		      or 'dt-binding/gce/mt8183-gce.h'.
> +#subsys-cells: Should be 2.
> +	<&phandle register_base_address subsys_number>
> +	phandle: Label name of a gce node.
> +	register_base_address: the register base address that client
> +			       want to write or read.
> +	subsys_number: specify the sub-system id which is corresponding
> +		       to the register address.

I would like this description similar to 'reg' property. For example:

If a client want GCE to access register from 0x14002000 ~ 0x14002fff,
in the view of GCE, it would access register from SUBSYS_1400XXXX with
an offset 0x2000 to SUBSYS_1400XXXX with an offset 0x2fff
So the description could be:

mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x2000 0x1000>

the second parameter is subsys, the third parameter is start offset, and
the fourth parameter is the size.

I change the property name to 'mediatek,gce-client-reg' because this
whole property describe the range GCE access rather than the subsys. 

Regards,
CK

>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
> @@ -50,6 +57,7 @@ Example:
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
>  		#event-cells = <1>;
> +		#subsys-cells = <2>;
>  	};
>  
>  Example for a client device:
> @@ -58,7 +66,8 @@ Example for a client device:
>  		compatible = "mediatek,mt8173-mmsys";
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
>  		mediatek,gce-event-names = "rdma0_sof",
>  					   "rsz0_sof";
>  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get the relationship
> of sub system number from device node for client.
> add specification for #subsys-cells, mediatek,gce-subsys.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 812698f..07b2adf 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -26,6 +26,13 @@ Required properties:
>  	phandle: Label name of a gce node.
>  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
>  		      or 'dt-binding/gce/mt8183-gce.h'.
> +#subsys-cells: Should be 2.
> +	<&phandle register_base_address subsys_number>
> +	phandle: Label name of a gce node.
> +	register_base_address: the register base address that client
> +			       want to write or read.
> +	subsys_number: specify the sub-system id which is corresponding
> +		       to the register address.

I would like this description similar to 'reg' property. For example:

If a client want GCE to access register from 0x14002000 ~ 0x14002fff,
in the view of GCE, it would access register from SUBSYS_1400XXXX with
an offset 0x2000 to SUBSYS_1400XXXX with an offset 0x2fff
So the description could be:

mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x2000 0x1000>

the second parameter is subsys, the third parameter is start offset, and
the fourth parameter is the size.

I change the property name to 'mediatek,gce-client-reg' because this
whole property describe the range GCE access rather than the subsys. 

Regards,
CK

>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
> @@ -50,6 +57,7 @@ Example:
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
>  		#event-cells = <1>;
> +		#subsys-cells = <2>;
>  	};
>  
>  Example for a client device:
> @@ -58,7 +66,8 @@ Example for a client device:
>  		compatible = "mediatek,mt8173-mmsys";
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
>  		mediatek,gce-event-names = "rdma0_sof",
>  					   "rsz0_sof";
>  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,

Re: [PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get the relationship
> of sub system number from device node for client.
> add specification for #subsys-cells, mediatek,gce-subsys.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 812698f..07b2adf 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -26,6 +26,13 @@ Required properties:
>  	phandle: Label name of a gce node.
>  	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
>  		      or 'dt-binding/gce/mt8183-gce.h'.
> +#subsys-cells: Should be 2.
> +	<&phandle register_base_address subsys_number>
> +	phandle: Label name of a gce node.
> +	register_base_address: the register base address that client
> +			       want to write or read.
> +	subsys_number: specify the sub-system id which is corresponding
> +		       to the register address.

I would like this description similar to 'reg' property. For example:

If a client want GCE to access register from 0x14002000 ~ 0x14002fff,
in the view of GCE, it would access register from SUBSYS_1400XXXX with
an offset 0x2000 to SUBSYS_1400XXXX with an offset 0x2fff
So the description could be:

mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x2000 0x1000>

the second parameter is subsys, the third parameter is start offset, and
the fourth parameter is the size.

I change the property name to 'mediatek,gce-client-reg' because this
whole property describe the range GCE access rather than the subsys. 

Regards,
CK

>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
> @@ -50,6 +57,7 @@ Example:
>  		thread-num = CMDQ_THR_MAX_COUNT;
>  		#mbox-cells = <3>;
>  		#event-cells = <1>;
> +		#subsys-cells = <2>;
>  	};
>  
>  Example for a client device:
> @@ -58,7 +66,8 @@ Example for a client device:
>  		compatible = "mediatek,mt8173-mmsys";
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> -		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> +		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> +				      <&gce 0x14010000 SUBSYS_1401XXXX>;
>  		mediatek,gce-event-names = "rdma0_sof",
>  					   "rsz0_sof";
>  		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 04/10] soc: mediatek: cmdq: add mt8183 compatible name

[Bibby Hsieh]

add mt8183 compatible name

Signed-off-by: Bibby Hsieh <bibby.hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 2281178..909eb23 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -536,6 +536,7 @@ static int cmdq_probe(struct platform_device *pdev)
 
 static const struct of_device_id cmdq_of_ids[] = {
 	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
+	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
 	{}
 };
 
-- 
1.9.1

[PATCH v2 04/10] soc: mediatek: cmdq: add mt8183 compatible name

[Bibby Hsieh]

add mt8183 compatible name

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 2281178..909eb23 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -536,6 +536,7 @@ static int cmdq_probe(struct platform_device *pdev)
 
 static const struct of_device_id cmdq_of_ids[] = {
 	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
+	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
 	{}
 };
 
-- 
1.9.1

[PATCH v2 04/10] soc: mediatek: cmdq: add mt8183 compatible name

[Bibby Hsieh]

add mt8183 compatible name

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 2281178..909eb23 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -536,6 +536,7 @@ static int cmdq_probe(struct platform_device *pdev)
 
 static const struct of_device_id cmdq_of_ids[] = {
 	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
+	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
 	{}
 };
 
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/10] soc: mediatek: cmdq: add mt8183 compatible name

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> add mt8183 compatible name

This patch doest not just add compatible name, it let this driver
support mt8183 gce function.

And I think this patch should be moved after the patch 'soc: mediatek:
cmdq: move the CMDQ_IRQ_MASK into cmdq driver data'.

Regards,
CK

> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 2281178..909eb23 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -536,6 +536,7 @@ static int cmdq_probe(struct platform_device *pdev)
>  
>  static const struct of_device_id cmdq_of_ids[] = {
>  	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
> +	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
>  	{}
>  };
>  

Re: [PATCH v2 04/10] soc: mediatek: cmdq: add mt8183 compatible name

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> add mt8183 compatible name

This patch doest not just add compatible name, it let this driver
support mt8183 gce function.

And I think this patch should be moved after the patch 'soc: mediatek:
cmdq: move the CMDQ_IRQ_MASK into cmdq driver data'.

Regards,
CK

> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 2281178..909eb23 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -536,6 +536,7 @@ static int cmdq_probe(struct platform_device *pdev)
>  
>  static const struct of_device_id cmdq_of_ids[] = {
>  	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
> +	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
>  	{}
>  };
>  

Re: [PATCH v2 04/10] soc: mediatek: cmdq: add mt8183 compatible name

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> add mt8183 compatible name

This patch doest not just add compatible name, it let this driver
support mt8183 gce function.

And I think this patch should be moved after the patch 'soc: mediatek:
cmdq: move the CMDQ_IRQ_MASK into cmdq driver data'.

Regards,
CK

> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 2281178..909eb23 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -536,6 +536,7 @@ static int cmdq_probe(struct platform_device *pdev)
>  
>  static const struct of_device_id cmdq_of_ids[] = {
>  	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
> +	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
>  	{}
>  };
>  



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 05/10] soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data

[Bibby Hsieh]

The interrupt mask and thread number has positive correlation,
so we move the CMDQ_IRQ_MASK into cmdq driver data and calculate
it by thread number.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 909eb23..6db1e2d 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -17,7 +17,6 @@
 #include <linux/of_device.h>
 
 #define CMDQ_OP_CODE_MASK		(0xff << CMDQ_OP_CODE_SHIFT)
-#define CMDQ_IRQ_MASK			0xffff
 #define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
 
 #define CMDQ_CURR_IRQ_STATUS		0x10
@@ -71,6 +70,7 @@ struct cmdq {
 	void __iomem		*base;
 	u32			irq;
 	u32			thread_nr;
+	u32			irq_mask;
 	struct cmdq_thread	*thread;
 	struct clk		*clock;
 	bool			suspended;
@@ -284,11 +284,11 @@ static irqreturn_t cmdq_irq_handler(int irq, void *dev)
 	unsigned long irq_status, flags = 0L;
 	int bit;
 
-	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & CMDQ_IRQ_MASK;
-	if (!(irq_status ^ CMDQ_IRQ_MASK))
+	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & cmdq->irq_mask;
+	if (!(irq_status ^ cmdq->irq_mask))
 		return IRQ_NONE;
 
-	for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK)) {
+	for_each_clear_bit(bit, &irq_status, cmdq->thread_nr) {
 		struct cmdq_thread *thread = &cmdq->thread[bit];
 
 		spin_lock_irqsave(&thread->chan->lock, flags);
@@ -472,6 +472,9 @@ static int cmdq_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to get irq\n");
 		return -EINVAL;
 	}
+
+	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
+	cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
 	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
 			       "mtk_cmdq", cmdq);
 	if (err < 0) {
@@ -488,7 +491,6 @@ static int cmdq_probe(struct platform_device *pdev)
 		return PTR_ERR(cmdq->clock);
 	}
 
-	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
 	cmdq->mbox.dev = dev;
 	cmdq->mbox.chans = devm_kcalloc(dev, cmdq->thread_nr,
 					sizeof(*cmdq->mbox.chans), GFP_KERNEL);
-- 
1.9.1

[PATCH v2 05/10] soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data

[Bibby Hsieh]

The interrupt mask and thread number has positive correlation,
so we move the CMDQ_IRQ_MASK into cmdq driver data and calculate
it by thread number.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 909eb23..6db1e2d 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -17,7 +17,6 @@
 #include <linux/of_device.h>
 
 #define CMDQ_OP_CODE_MASK		(0xff << CMDQ_OP_CODE_SHIFT)
-#define CMDQ_IRQ_MASK			0xffff
 #define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
 
 #define CMDQ_CURR_IRQ_STATUS		0x10
@@ -71,6 +70,7 @@ struct cmdq {
 	void __iomem		*base;
 	u32			irq;
 	u32			thread_nr;
+	u32			irq_mask;
 	struct cmdq_thread	*thread;
 	struct clk		*clock;
 	bool			suspended;
@@ -284,11 +284,11 @@ static irqreturn_t cmdq_irq_handler(int irq, void *dev)
 	unsigned long irq_status, flags = 0L;
 	int bit;
 
-	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & CMDQ_IRQ_MASK;
-	if (!(irq_status ^ CMDQ_IRQ_MASK))
+	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & cmdq->irq_mask;
+	if (!(irq_status ^ cmdq->irq_mask))
 		return IRQ_NONE;
 
-	for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK)) {
+	for_each_clear_bit(bit, &irq_status, cmdq->thread_nr) {
 		struct cmdq_thread *thread = &cmdq->thread[bit];
 
 		spin_lock_irqsave(&thread->chan->lock, flags);
@@ -472,6 +472,9 @@ static int cmdq_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to get irq\n");
 		return -EINVAL;
 	}
+
+	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
+	cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
 	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
 			       "mtk_cmdq", cmdq);
 	if (err < 0) {
@@ -488,7 +491,6 @@ static int cmdq_probe(struct platform_device *pdev)
 		return PTR_ERR(cmdq->clock);
 	}
 
-	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
 	cmdq->mbox.dev = dev;
 	cmdq->mbox.chans = devm_kcalloc(dev, cmdq->thread_nr,
 					sizeof(*cmdq->mbox.chans), GFP_KERNEL);
-- 
1.9.1

[PATCH v2 05/10] soc: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data

[Bibby Hsieh]

The interrupt mask and thread number has positive correlation,
so we move the CMDQ_IRQ_MASK into cmdq driver data and calculate
it by thread number.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 909eb23..6db1e2d 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -17,7 +17,6 @@
 #include <linux/of_device.h>
 
 #define CMDQ_OP_CODE_MASK		(0xff << CMDQ_OP_CODE_SHIFT)
-#define CMDQ_IRQ_MASK			0xffff
 #define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
 
 #define CMDQ_CURR_IRQ_STATUS		0x10
@@ -71,6 +70,7 @@ struct cmdq {
 	void __iomem		*base;
 	u32			irq;
 	u32			thread_nr;
+	u32			irq_mask;
 	struct cmdq_thread	*thread;
 	struct clk		*clock;
 	bool			suspended;
@@ -284,11 +284,11 @@ static irqreturn_t cmdq_irq_handler(int irq, void *dev)
 	unsigned long irq_status, flags = 0L;
 	int bit;
 
-	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & CMDQ_IRQ_MASK;
-	if (!(irq_status ^ CMDQ_IRQ_MASK))
+	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & cmdq->irq_mask;
+	if (!(irq_status ^ cmdq->irq_mask))
 		return IRQ_NONE;
 
-	for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK)) {
+	for_each_clear_bit(bit, &irq_status, cmdq->thread_nr) {
 		struct cmdq_thread *thread = &cmdq->thread[bit];
 
 		spin_lock_irqsave(&thread->chan->lock, flags);
@@ -472,6 +472,9 @@ static int cmdq_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to get irq\n");
 		return -EINVAL;
 	}
+
+	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
+	cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
 	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
 			       "mtk_cmdq", cmdq);
 	if (err < 0) {
@@ -488,7 +491,6 @@ static int cmdq_probe(struct platform_device *pdev)
 		return PTR_ERR(cmdq->clock);
 	}
 
-	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
 	cmdq->mbox.dev = dev;
 	cmdq->mbox.chans = devm_kcalloc(dev, cmdq->thread_nr,
 					sizeof(*cmdq->mbox.chans), GFP_KERNEL);
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 06/10] soc: mediatek: cmdq: clear the event in cmdq initial flow

[Bibby Hsieh]

GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.

In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.

Fixup commit 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
 include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
 include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 6db1e2d..4e744cf 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -33,6 +33,7 @@
 #define CMDQ_THR_END_ADDR		0x24
 #define CMDQ_THR_WAIT_TOKEN		0x30
 #define CMDQ_THR_PRIORITY		0x40
+#define CMDQ_SYNC_TOKEN_UPDATE		0x68
 
 #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
 #define CMDQ_THR_ENABLED		0x1
@@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
 
 static void cmdq_init(struct cmdq *cmdq)
 {
+	int i;
+
 	WARN_ON(clk_enable(cmdq->clock) < 0);
 	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
+		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
 	clk_disable(cmdq->clock);
 }
 
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ccb7342..911475da 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+/** cmdq event maximum */
+#define CMDQ_MAX_EVENT			0x3ff
 
 /*
  * CMDQ_CODE_MASK:
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13..4e88999 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -13,9 +13,6 @@
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
 
-/** cmdq event maximum */
-#define CMDQ_MAX_EVENT				0x3ff
-
 struct cmdq_pkt;
 
 struct cmdq_client {
-- 
1.9.1

[PATCH v2 06/10] soc: mediatek: cmdq: clear the event in cmdq initial flow

[Bibby Hsieh]

GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.

In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.

Fixup commit 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
 include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
 include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 6db1e2d..4e744cf 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -33,6 +33,7 @@
 #define CMDQ_THR_END_ADDR		0x24
 #define CMDQ_THR_WAIT_TOKEN		0x30
 #define CMDQ_THR_PRIORITY		0x40
+#define CMDQ_SYNC_TOKEN_UPDATE		0x68
 
 #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
 #define CMDQ_THR_ENABLED		0x1
@@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
 
 static void cmdq_init(struct cmdq *cmdq)
 {
+	int i;
+
 	WARN_ON(clk_enable(cmdq->clock) < 0);
 	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
+		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
 	clk_disable(cmdq->clock);
 }
 
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ccb7342..911475da 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+/** cmdq event maximum */
+#define CMDQ_MAX_EVENT			0x3ff
 
 /*
  * CMDQ_CODE_MASK:
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13..4e88999 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -13,9 +13,6 @@
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
 
-/** cmdq event maximum */
-#define CMDQ_MAX_EVENT				0x3ff
-
 struct cmdq_pkt;
 
 struct cmdq_client {
-- 
1.9.1

[PATCH v2 06/10] soc: mediatek: cmdq: clear the event in cmdq initial flow

[Bibby Hsieh]

GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.

In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.

Fixup commit 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
 include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
 include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 6db1e2d..4e744cf 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -33,6 +33,7 @@
 #define CMDQ_THR_END_ADDR		0x24
 #define CMDQ_THR_WAIT_TOKEN		0x30
 #define CMDQ_THR_PRIORITY		0x40
+#define CMDQ_SYNC_TOKEN_UPDATE		0x68
 
 #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
 #define CMDQ_THR_ENABLED		0x1
@@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
 
 static void cmdq_init(struct cmdq *cmdq)
 {
+	int i;
+
 	WARN_ON(clk_enable(cmdq->clock) < 0);
 	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
+		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
 	clk_disable(cmdq->clock);
 }
 
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ccb7342..911475da 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+/** cmdq event maximum */
+#define CMDQ_MAX_EVENT			0x3ff
 
 /*
  * CMDQ_CODE_MASK:
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13..4e88999 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -13,9 +13,6 @@
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
 
-/** cmdq event maximum */
-#define CMDQ_MAX_EVENT				0x3ff
-
 struct cmdq_pkt;
 
 struct cmdq_client {
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 06/10] soc: mediatek: cmdq: clear the event in cmdq initial flow

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> GCE hardware stored event information in own internal sysram,
> if the initial value in those sysram is not zero value
> it will cause a situation that gce can wait the event immediately
> after client ask gce to wait event but not really trigger the
> corresponding hardware.
> 
> In order to make sure that the wait event function is
> exactly correct, we need to clear the sysram value in
> cmdq initial flow.
> 
> Fixup commit 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Please refer to [1] for the fix tag.

[1] https://www.kernel.org/doc/html/v5.0/process/submitting-patches.html

Regards,
CK

> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
>  include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
>  3 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 6db1e2d..4e744cf 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -33,6 +33,7 @@
>  #define CMDQ_THR_END_ADDR		0x24
>  #define CMDQ_THR_WAIT_TOKEN		0x30
>  #define CMDQ_THR_PRIORITY		0x40
> +#define CMDQ_SYNC_TOKEN_UPDATE		0x68
>  
>  #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
>  #define CMDQ_THR_ENABLED		0x1
> @@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
>  
>  static void cmdq_init(struct cmdq *cmdq)
>  {
> +	int i;
> +
>  	WARN_ON(clk_enable(cmdq->clock) < 0);
>  	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
> +	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
> +		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
>  	clk_disable(cmdq->clock);
>  }
>  
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index ccb7342..911475da 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
>  #define CMDQ_WFE_UPDATE			BIT(31)
>  #define CMDQ_WFE_WAIT			BIT(15)
>  #define CMDQ_WFE_WAIT_VALUE		0x1
> +/** cmdq event maximum */
> +#define CMDQ_MAX_EVENT			0x3ff
>  
>  /*
>   * CMDQ_CODE_MASK:
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 54ade13..4e88999 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -13,9 +13,6 @@
>  
>  #define CMDQ_NO_TIMEOUT		0xffffffffu
>  
> -/** cmdq event maximum */
> -#define CMDQ_MAX_EVENT				0x3ff
> -
>  struct cmdq_pkt;
>  
>  struct cmdq_client {

Re: [PATCH v2 06/10] soc: mediatek: cmdq: clear the event in cmdq initial flow

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> GCE hardware stored event information in own internal sysram,
> if the initial value in those sysram is not zero value
> it will cause a situation that gce can wait the event immediately
> after client ask gce to wait event but not really trigger the
> corresponding hardware.
> 
> In order to make sure that the wait event function is
> exactly correct, we need to clear the sysram value in
> cmdq initial flow.
> 
> Fixup commit 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Please refer to [1] for the fix tag.

[1] https://www.kernel.org/doc/html/v5.0/process/submitting-patches.html

Regards,
CK

> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
>  include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
>  3 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 6db1e2d..4e744cf 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -33,6 +33,7 @@
>  #define CMDQ_THR_END_ADDR		0x24
>  #define CMDQ_THR_WAIT_TOKEN		0x30
>  #define CMDQ_THR_PRIORITY		0x40
> +#define CMDQ_SYNC_TOKEN_UPDATE		0x68
>  
>  #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
>  #define CMDQ_THR_ENABLED		0x1
> @@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
>  
>  static void cmdq_init(struct cmdq *cmdq)
>  {
> +	int i;
> +
>  	WARN_ON(clk_enable(cmdq->clock) < 0);
>  	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
> +	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
> +		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
>  	clk_disable(cmdq->clock);
>  }
>  
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index ccb7342..911475da 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
>  #define CMDQ_WFE_UPDATE			BIT(31)
>  #define CMDQ_WFE_WAIT			BIT(15)
>  #define CMDQ_WFE_WAIT_VALUE		0x1
> +/** cmdq event maximum */
> +#define CMDQ_MAX_EVENT			0x3ff
>  
>  /*
>   * CMDQ_CODE_MASK:
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 54ade13..4e88999 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -13,9 +13,6 @@
>  
>  #define CMDQ_NO_TIMEOUT		0xffffffffu
>  
> -/** cmdq event maximum */
> -#define CMDQ_MAX_EVENT				0x3ff
> -
>  struct cmdq_pkt;
>  
>  struct cmdq_client {

Re: [PATCH v2 06/10] soc: mediatek: cmdq: clear the event in cmdq initial flow

[CK Hu]

Hi, Bibby:

On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote:
> GCE hardware stored event information in own internal sysram,
> if the initial value in those sysram is not zero value
> it will cause a situation that gce can wait the event immediately
> after client ask gce to wait event but not really trigger the
> corresponding hardware.
> 
> In order to make sure that the wait event function is
> exactly correct, we need to clear the sysram value in
> cmdq initial flow.
> 
> Fixup commit 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Please refer to [1] for the fix tag.

[1] https://www.kernel.org/doc/html/v5.0/process/submitting-patches.html

Regards,
CK

> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
>  include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
>  3 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 6db1e2d..4e744cf 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -33,6 +33,7 @@
>  #define CMDQ_THR_END_ADDR		0x24
>  #define CMDQ_THR_WAIT_TOKEN		0x30
>  #define CMDQ_THR_PRIORITY		0x40
> +#define CMDQ_SYNC_TOKEN_UPDATE		0x68
>  
>  #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
>  #define CMDQ_THR_ENABLED		0x1
> @@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
>  
>  static void cmdq_init(struct cmdq *cmdq)
>  {
> +	int i;
> +
>  	WARN_ON(clk_enable(cmdq->clock) < 0);
>  	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
> +	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
> +		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
>  	clk_disable(cmdq->clock);
>  }
>  
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index ccb7342..911475da 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
>  #define CMDQ_WFE_UPDATE			BIT(31)
>  #define CMDQ_WFE_WAIT			BIT(15)
>  #define CMDQ_WFE_WAIT_VALUE		0x1
> +/** cmdq event maximum */
> +#define CMDQ_MAX_EVENT			0x3ff
>  
>  /*
>   * CMDQ_CODE_MASK:
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 54ade13..4e88999 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -13,9 +13,6 @@
>  
>  #define CMDQ_NO_TIMEOUT		0xffffffffu
>  
> -/** cmdq event maximum */
> -#define CMDQ_MAX_EVENT				0x3ff
> -
>  struct cmdq_pkt;
>  
>  struct cmdq_client {



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 07/10] soc: mediatek: cmdq: add packet encoder function

[Bibby Hsieh]

Implement a function can encode the GCE instructions

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 125 ++++++++++++++++++++++---------
 include/linux/mailbox/mtk-cmdq-mailbox.h |   2 +
 include/linux/soc/mediatek/mtk-cmdq.h    |  14 ++--
 3 files changed, 99 insertions(+), 42 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ff9fef5..d3873ab 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -9,11 +9,43 @@
 #include <linux/mailbox_controller.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
-#define CMDQ_ARG_A_WRITE_MASK	0xffff
+#define CMDQ_GET_ARG_B(arg)	(((arg) & GENMASK(31, 16)) >> 16)
+#define CMDQ_GET_ARG_C(arg)	((arg) & GENMASK(15, 0))
 #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
 #define CMDQ_EOC_IRQ_EN		BIT(0)
 #define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
 				<< 32 | CMDQ_EOC_IRQ_EN)
+#define CMDQ_IMMEDIATE_VALUE	0
+#define CMDQ_REG_TYPE		1
+
+struct cmdq_instruction {
+	s16 arg_c:16;
+	s16 arg_b:16;
+	s16 arg_a:16;
+	u8 s_op:5;
+	u8 arg_c_type:1;
+	u8 arg_b_type:1;
+	u8 arg_a_type:1;
+	u8 op:8;
+};
+
+static void cmdq_pkt_instr_encoder(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
+				   s16 arg_a, u8 s_op, u8 arg_c_type,
+				   u8 arg_b_type, u8 arg_a_type, u8 op)
+{
+	struct cmdq_instruction *cmdq_inst;
+
+	cmdq_inst = pkt->va_base + pkt->cmd_buf_size;
+	cmdq_inst->op = op;
+	cmdq_inst->arg_a_type = arg_a_type;
+	cmdq_inst->arg_b_type = arg_b_type;
+	cmdq_inst->arg_c_type = arg_c_type;
+	cmdq_inst->s_op = s_op;
+	cmdq_inst->arg_a = arg_a;
+	cmdq_inst->arg_b = arg_b;
+	cmdq_inst->arg_c = arg_c;
+	pkt->cmd_buf_size += CMDQ_INST_SIZE;
+}
 
 static void cmdq_client_timeout(struct timer_list *t)
 {
@@ -110,10 +142,11 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
 }
 EXPORT_SYMBOL(cmdq_pkt_destroy);
 
-static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
-				   u32 arg_a, u32 arg_b)
+static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
+				   s16 arg_a, u8 s_op, u8 arg_c_type,
+				   u8 arg_b_type, u8 arg_a_type,
+				   enum cmdq_code code)
 {
-	u64 *cmd_ptr;
 
 	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
 		/*
@@ -129,65 +162,72 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
 			__func__, (u32)pkt->buf_size);
 		return -ENOMEM;
 	}
-	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
-	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
-	pkt->cmd_buf_size += CMDQ_INST_SIZE;
+	cmdq_pkt_instr_encoder(pkt, arg_c, arg_b, arg_a, s_op, arg_c_type,
+			       arg_b_type, arg_a_type, code);
 
 	return 0;
 }
 
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
 {
-	u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
-		    (subsys << CMDQ_SUBSYS_SHIFT);
-
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
+				       CMDQ_GET_ARG_B(value), offset, subsys,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE, CMDQ_CODE_WRITE);
 }
 EXPORT_SYMBOL(cmdq_pkt_write);
 
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
-			u32 subsys, u32 offset, u32 mask)
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
+			u32 value, u32 mask)
 {
 	u32 offset_mask = offset;
 	int err = 0;
 
 	if (mask != 0xffffffff) {
-		err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
+		err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
+					      CMDQ_GET_ARG_B(~mask),
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_CODE_MASK);
 		offset_mask |= CMDQ_WRITE_ENABLE_MASK;
 	}
-	err |= cmdq_pkt_write(pkt, value, subsys, offset_mask);
+	err |= cmdq_pkt_write(pkt, subsys, offset_mask, value);
 
 	return err;
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
-	u32 arg_b;
-
 	if (event >= CMDQ_MAX_EVENT)
 		return -EINVAL;
 
-	/*
-	 * WFE arg_b
-	 * bit 0-11: wait value
-	 * bit 15: 1 - wait, 0 - no wait
-	 * bit 16-27: update value
-	 * bit 31: 1 - update, 0 - no update
-	 */
-	arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
-
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event, arg_b);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_WFE_OPTION),
+				       CMDQ_GET_ARG_B(CMDQ_WFE_OPTION), event,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_CODE_WFE);
 }
 EXPORT_SYMBOL(cmdq_pkt_wfe);
 
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
 {
 	if (event >= CMDQ_MAX_EVENT)
 		return -EINVAL;
 
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event,
-				       CMDQ_WFE_UPDATE);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_WFE_UPDATE),
+				       CMDQ_GET_ARG_B(CMDQ_WFE_UPDATE), event,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_CODE_WFE);
 }
 EXPORT_SYMBOL(cmdq_pkt_clear_event);
 
@@ -196,10 +236,25 @@ static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 	int err;
 
 	/* insert EOC and generate IRQ for each command iteration */
-	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
-
+	err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_EOC_IRQ_EN),
+				      CMDQ_GET_ARG_B(CMDQ_EOC_IRQ_EN),
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_CODE_EOC);
+	if (err < 0)
+		return err;
 	/* JUMP to end */
-	err |= cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
+	err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_JUMP_PASS),
+				      CMDQ_GET_ARG_B(CMDQ_JUMP_PASS),
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_CODE_JUMP);
 
 	return err;
 }
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 911475da..f21801d 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+#define CMDQ_WFE_OPTION                 (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
+					CMDQ_WFE_WAIT_VALUE)
 /** cmdq event maximum */
 #define CMDQ_MAX_EVENT			0x3ff
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 4e88999..52f69c8 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -60,26 +60,26 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index,
 /**
  * cmdq_pkt_write() - append write command to the CMDQ packet
  * @pkt:	the CMDQ packet
- * @value:	the specified target register value
  * @subsys:	the CMDQ sub system code
  * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset);
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
 
 /**
  * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
  * @pkt:	the CMDQ packet
- * @value:	the specified target register value
  * @subsys:	the CMDQ sub system code
  * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
  * @mask:	the specified target register mask
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
-			u32 subsys, u32 offset, u32 mask);
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
+			u32 value, u32 mask);
 
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
@@ -88,7 +88,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
 
 /**
  * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
@@ -97,7 +97,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
 
 /**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
-- 
1.9.1

[PATCH v2 07/10] soc: mediatek: cmdq: add packet encoder function

[Bibby Hsieh]

Implement a function can encode the GCE instructions

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 125 ++++++++++++++++++++++---------
 include/linux/mailbox/mtk-cmdq-mailbox.h |   2 +
 include/linux/soc/mediatek/mtk-cmdq.h    |  14 ++--
 3 files changed, 99 insertions(+), 42 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ff9fef5..d3873ab 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -9,11 +9,43 @@
 #include <linux/mailbox_controller.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
-#define CMDQ_ARG_A_WRITE_MASK	0xffff
+#define CMDQ_GET_ARG_B(arg)	(((arg) & GENMASK(31, 16)) >> 16)
+#define CMDQ_GET_ARG_C(arg)	((arg) & GENMASK(15, 0))
 #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
 #define CMDQ_EOC_IRQ_EN		BIT(0)
 #define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
 				<< 32 | CMDQ_EOC_IRQ_EN)
+#define CMDQ_IMMEDIATE_VALUE	0
+#define CMDQ_REG_TYPE		1
+
+struct cmdq_instruction {
+	s16 arg_c:16;
+	s16 arg_b:16;
+	s16 arg_a:16;
+	u8 s_op:5;
+	u8 arg_c_type:1;
+	u8 arg_b_type:1;
+	u8 arg_a_type:1;
+	u8 op:8;
+};
+
+static void cmdq_pkt_instr_encoder(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
+				   s16 arg_a, u8 s_op, u8 arg_c_type,
+				   u8 arg_b_type, u8 arg_a_type, u8 op)
+{
+	struct cmdq_instruction *cmdq_inst;
+
+	cmdq_inst = pkt->va_base + pkt->cmd_buf_size;
+	cmdq_inst->op = op;
+	cmdq_inst->arg_a_type = arg_a_type;
+	cmdq_inst->arg_b_type = arg_b_type;
+	cmdq_inst->arg_c_type = arg_c_type;
+	cmdq_inst->s_op = s_op;
+	cmdq_inst->arg_a = arg_a;
+	cmdq_inst->arg_b = arg_b;
+	cmdq_inst->arg_c = arg_c;
+	pkt->cmd_buf_size += CMDQ_INST_SIZE;
+}
 
 static void cmdq_client_timeout(struct timer_list *t)
 {
@@ -110,10 +142,11 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
 }
 EXPORT_SYMBOL(cmdq_pkt_destroy);
 
-static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
-				   u32 arg_a, u32 arg_b)
+static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
+				   s16 arg_a, u8 s_op, u8 arg_c_type,
+				   u8 arg_b_type, u8 arg_a_type,
+				   enum cmdq_code code)
 {
-	u64 *cmd_ptr;
 
 	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
 		/*
@@ -129,65 +162,72 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
 			__func__, (u32)pkt->buf_size);
 		return -ENOMEM;
 	}
-	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
-	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
-	pkt->cmd_buf_size += CMDQ_INST_SIZE;
+	cmdq_pkt_instr_encoder(pkt, arg_c, arg_b, arg_a, s_op, arg_c_type,
+			       arg_b_type, arg_a_type, code);
 
 	return 0;
 }
 
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
 {
-	u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
-		    (subsys << CMDQ_SUBSYS_SHIFT);
-
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
+				       CMDQ_GET_ARG_B(value), offset, subsys,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE, CMDQ_CODE_WRITE);
 }
 EXPORT_SYMBOL(cmdq_pkt_write);
 
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
-			u32 subsys, u32 offset, u32 mask)
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
+			u32 value, u32 mask)
 {
 	u32 offset_mask = offset;
 	int err = 0;
 
 	if (mask != 0xffffffff) {
-		err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
+		err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
+					      CMDQ_GET_ARG_B(~mask),
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_CODE_MASK);
 		offset_mask |= CMDQ_WRITE_ENABLE_MASK;
 	}
-	err |= cmdq_pkt_write(pkt, value, subsys, offset_mask);
+	err |= cmdq_pkt_write(pkt, subsys, offset_mask, value);
 
 	return err;
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
-	u32 arg_b;
-
 	if (event >= CMDQ_MAX_EVENT)
 		return -EINVAL;
 
-	/*
-	 * WFE arg_b
-	 * bit 0-11: wait value
-	 * bit 15: 1 - wait, 0 - no wait
-	 * bit 16-27: update value
-	 * bit 31: 1 - update, 0 - no update
-	 */
-	arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
-
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event, arg_b);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_WFE_OPTION),
+				       CMDQ_GET_ARG_B(CMDQ_WFE_OPTION), event,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_CODE_WFE);
 }
 EXPORT_SYMBOL(cmdq_pkt_wfe);
 
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
 {
 	if (event >= CMDQ_MAX_EVENT)
 		return -EINVAL;
 
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event,
-				       CMDQ_WFE_UPDATE);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_WFE_UPDATE),
+				       CMDQ_GET_ARG_B(CMDQ_WFE_UPDATE), event,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_CODE_WFE);
 }
 EXPORT_SYMBOL(cmdq_pkt_clear_event);
 
@@ -196,10 +236,25 @@ static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 	int err;
 
 	/* insert EOC and generate IRQ for each command iteration */
-	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
-
+	err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_EOC_IRQ_EN),
+				      CMDQ_GET_ARG_B(CMDQ_EOC_IRQ_EN),
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_CODE_EOC);
+	if (err < 0)
+		return err;
 	/* JUMP to end */
-	err |= cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
+	err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_JUMP_PASS),
+				      CMDQ_GET_ARG_B(CMDQ_JUMP_PASS),
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_CODE_JUMP);
 
 	return err;
 }
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 911475da..f21801d 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+#define CMDQ_WFE_OPTION                 (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
+					CMDQ_WFE_WAIT_VALUE)
 /** cmdq event maximum */
 #define CMDQ_MAX_EVENT			0x3ff
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 4e88999..52f69c8 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -60,26 +60,26 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index,
 /**
  * cmdq_pkt_write() - append write command to the CMDQ packet
  * @pkt:	the CMDQ packet
- * @value:	the specified target register value
  * @subsys:	the CMDQ sub system code
  * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset);
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
 
 /**
  * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
  * @pkt:	the CMDQ packet
- * @value:	the specified target register value
  * @subsys:	the CMDQ sub system code
  * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
  * @mask:	the specified target register mask
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
-			u32 subsys, u32 offset, u32 mask);
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
+			u32 value, u32 mask);
 
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
@@ -88,7 +88,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
 
 /**
  * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
@@ -97,7 +97,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
 
 /**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
-- 
1.9.1

[PATCH v2 07/10] soc: mediatek: cmdq: add packet encoder function

[Bibby Hsieh]

Implement a function can encode the GCE instructions

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 125 ++++++++++++++++++++++---------
 include/linux/mailbox/mtk-cmdq-mailbox.h |   2 +
 include/linux/soc/mediatek/mtk-cmdq.h    |  14 ++--
 3 files changed, 99 insertions(+), 42 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ff9fef5..d3873ab 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -9,11 +9,43 @@
 #include <linux/mailbox_controller.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
-#define CMDQ_ARG_A_WRITE_MASK	0xffff
+#define CMDQ_GET_ARG_B(arg)	(((arg) & GENMASK(31, 16)) >> 16)
+#define CMDQ_GET_ARG_C(arg)	((arg) & GENMASK(15, 0))
 #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
 #define CMDQ_EOC_IRQ_EN		BIT(0)
 #define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
 				<< 32 | CMDQ_EOC_IRQ_EN)
+#define CMDQ_IMMEDIATE_VALUE	0
+#define CMDQ_REG_TYPE		1
+
+struct cmdq_instruction {
+	s16 arg_c:16;
+	s16 arg_b:16;
+	s16 arg_a:16;
+	u8 s_op:5;
+	u8 arg_c_type:1;
+	u8 arg_b_type:1;
+	u8 arg_a_type:1;
+	u8 op:8;
+};
+
+static void cmdq_pkt_instr_encoder(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
+				   s16 arg_a, u8 s_op, u8 arg_c_type,
+				   u8 arg_b_type, u8 arg_a_type, u8 op)
+{
+	struct cmdq_instruction *cmdq_inst;
+
+	cmdq_inst = pkt->va_base + pkt->cmd_buf_size;
+	cmdq_inst->op = op;
+	cmdq_inst->arg_a_type = arg_a_type;
+	cmdq_inst->arg_b_type = arg_b_type;
+	cmdq_inst->arg_c_type = arg_c_type;
+	cmdq_inst->s_op = s_op;
+	cmdq_inst->arg_a = arg_a;
+	cmdq_inst->arg_b = arg_b;
+	cmdq_inst->arg_c = arg_c;
+	pkt->cmd_buf_size += CMDQ_INST_SIZE;
+}
 
 static void cmdq_client_timeout(struct timer_list *t)
 {
@@ -110,10 +142,11 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
 }
 EXPORT_SYMBOL(cmdq_pkt_destroy);
 
-static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
-				   u32 arg_a, u32 arg_b)
+static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
+				   s16 arg_a, u8 s_op, u8 arg_c_type,
+				   u8 arg_b_type, u8 arg_a_type,
+				   enum cmdq_code code)
 {
-	u64 *cmd_ptr;
 
 	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
 		/*
@@ -129,65 +162,72 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
 			__func__, (u32)pkt->buf_size);
 		return -ENOMEM;
 	}
-	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
-	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
-	pkt->cmd_buf_size += CMDQ_INST_SIZE;
+	cmdq_pkt_instr_encoder(pkt, arg_c, arg_b, arg_a, s_op, arg_c_type,
+			       arg_b_type, arg_a_type, code);
 
 	return 0;
 }
 
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
 {
-	u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
-		    (subsys << CMDQ_SUBSYS_SHIFT);
-
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
+				       CMDQ_GET_ARG_B(value), offset, subsys,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE, CMDQ_CODE_WRITE);
 }
 EXPORT_SYMBOL(cmdq_pkt_write);
 
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
-			u32 subsys, u32 offset, u32 mask)
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
+			u32 value, u32 mask)
 {
 	u32 offset_mask = offset;
 	int err = 0;
 
 	if (mask != 0xffffffff) {
-		err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
+		err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
+					      CMDQ_GET_ARG_B(~mask),
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_IMMEDIATE_VALUE,
+					      CMDQ_CODE_MASK);
 		offset_mask |= CMDQ_WRITE_ENABLE_MASK;
 	}
-	err |= cmdq_pkt_write(pkt, value, subsys, offset_mask);
+	err |= cmdq_pkt_write(pkt, subsys, offset_mask, value);
 
 	return err;
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
-	u32 arg_b;
-
 	if (event >= CMDQ_MAX_EVENT)
 		return -EINVAL;
 
-	/*
-	 * WFE arg_b
-	 * bit 0-11: wait value
-	 * bit 15: 1 - wait, 0 - no wait
-	 * bit 16-27: update value
-	 * bit 31: 1 - update, 0 - no update
-	 */
-	arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
-
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event, arg_b);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_WFE_OPTION),
+				       CMDQ_GET_ARG_B(CMDQ_WFE_OPTION), event,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_CODE_WFE);
 }
 EXPORT_SYMBOL(cmdq_pkt_wfe);
 
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
 {
 	if (event >= CMDQ_MAX_EVENT)
 		return -EINVAL;
 
-	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event,
-				       CMDQ_WFE_UPDATE);
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_WFE_UPDATE),
+				       CMDQ_GET_ARG_B(CMDQ_WFE_UPDATE), event,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_IMMEDIATE_VALUE,
+				       CMDQ_CODE_WFE);
 }
 EXPORT_SYMBOL(cmdq_pkt_clear_event);
 
@@ -196,10 +236,25 @@ static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 	int err;
 
 	/* insert EOC and generate IRQ for each command iteration */
-	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
-
+	err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_EOC_IRQ_EN),
+				      CMDQ_GET_ARG_B(CMDQ_EOC_IRQ_EN),
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_CODE_EOC);
+	if (err < 0)
+		return err;
 	/* JUMP to end */
-	err |= cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
+	err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(CMDQ_JUMP_PASS),
+				      CMDQ_GET_ARG_B(CMDQ_JUMP_PASS),
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_IMMEDIATE_VALUE,
+				      CMDQ_CODE_JUMP);
 
 	return err;
 }
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 911475da..f21801d 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+#define CMDQ_WFE_OPTION                 (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
+					CMDQ_WFE_WAIT_VALUE)
 /** cmdq event maximum */
 #define CMDQ_MAX_EVENT			0x3ff
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 4e88999..52f69c8 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -60,26 +60,26 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index,
 /**
  * cmdq_pkt_write() - append write command to the CMDQ packet
  * @pkt:	the CMDQ packet
- * @value:	the specified target register value
  * @subsys:	the CMDQ sub system code
  * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset);
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
 
 /**
  * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
  * @pkt:	the CMDQ packet
- * @value:	the specified target register value
  * @subsys:	the CMDQ sub system code
  * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
  * @mask:	the specified target register mask
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
-			u32 subsys, u32 offset, u32 mask);
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
+			u32 value, u32 mask);
 
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
@@ -88,7 +88,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
 
 /**
  * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
@@ -97,7 +97,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
  *
  * Return: 0 for success; else the error code is returned
  */
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
 
 /**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 08/10] soc: mediatek: cmdq: add polling function

[Bibby Hsieh]

add polling function in cmdq helper functions

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 +++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 15 +++++++++++++++
 3 files changed, 37 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index d3873ab..71c167c 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -231,6 +231,27 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
 }
 EXPORT_SYMBOL(cmdq_pkt_clear_event);
 
+int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
+		  u16 offset, u32 value, u32 mask)
+{
+	int err;
+
+	if (mask != 0xffffffff) {
+		err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
+					      CMDQ_GET_ARG_B(~mask),
+					      0, 0, 0, 0, 0, CMDQ_CODE_MASK);
+
+		if (err != 0)
+			return err;
+	}
+	offset = offset | 0x1;
+
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
+				       CMDQ_GET_ARG_B(value),
+				       offset, subsys, 0, 0, 0, CMDQ_CODE_POLL);
+}
+EXPORT_SYMBOL(cmdq_pkt_poll);
+
 static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 {
 	int err;
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index f21801d..1dfd5ed 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -46,6 +46,7 @@
 enum cmdq_code {
 	CMDQ_CODE_MASK = 0x02,
 	CMDQ_CODE_WRITE = 0x04,
+	CMDQ_CODE_POLL = 0x08,
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 52f69c8..0651a0b 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -100,6 +100,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
 int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
 
 /**
+ * cmdq_pkt_poll() - Append polling command to the CMDQ packet, ask GCE to
+ *		     execute an instruction that wait for a specified hardware
+ *		     register to check for the value. All GCE hardware
+ *		     threads will be blocked by this instruction.
+ * @pkt:	the CMDQ packet
+ * @subsys:	the CMDQ sub system code
+ * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
+ * @mask:	the specified target register mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
+		  u16 offset, u32 value, u32 mask);
+/**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
  *                          packet and call back at the end of done packet
  * @pkt:	the CMDQ packet
-- 
1.9.1

[PATCH v2 08/10] soc: mediatek: cmdq: add polling function

[Bibby Hsieh]

add polling function in cmdq helper functions

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 +++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 15 +++++++++++++++
 3 files changed, 37 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index d3873ab..71c167c 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -231,6 +231,27 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
 }
 EXPORT_SYMBOL(cmdq_pkt_clear_event);
 
+int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
+		  u16 offset, u32 value, u32 mask)
+{
+	int err;
+
+	if (mask != 0xffffffff) {
+		err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
+					      CMDQ_GET_ARG_B(~mask),
+					      0, 0, 0, 0, 0, CMDQ_CODE_MASK);
+
+		if (err != 0)
+			return err;
+	}
+	offset = offset | 0x1;
+
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
+				       CMDQ_GET_ARG_B(value),
+				       offset, subsys, 0, 0, 0, CMDQ_CODE_POLL);
+}
+EXPORT_SYMBOL(cmdq_pkt_poll);
+
 static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 {
 	int err;
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index f21801d..1dfd5ed 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -46,6 +46,7 @@
 enum cmdq_code {
 	CMDQ_CODE_MASK = 0x02,
 	CMDQ_CODE_WRITE = 0x04,
+	CMDQ_CODE_POLL = 0x08,
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 52f69c8..0651a0b 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -100,6 +100,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
 int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
 
 /**
+ * cmdq_pkt_poll() - Append polling command to the CMDQ packet, ask GCE to
+ *		     execute an instruction that wait for a specified hardware
+ *		     register to check for the value. All GCE hardware
+ *		     threads will be blocked by this instruction.
+ * @pkt:	the CMDQ packet
+ * @subsys:	the CMDQ sub system code
+ * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
+ * @mask:	the specified target register mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
+		  u16 offset, u32 value, u32 mask);
+/**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
  *                          packet and call back at the end of done packet
  * @pkt:	the CMDQ packet
-- 
1.9.1

[PATCH v2 08/10] soc: mediatek: cmdq: add polling function

[Bibby Hsieh]

add polling function in cmdq helper functions

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 +++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 15 +++++++++++++++
 3 files changed, 37 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index d3873ab..71c167c 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -231,6 +231,27 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
 }
 EXPORT_SYMBOL(cmdq_pkt_clear_event);
 
+int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
+		  u16 offset, u32 value, u32 mask)
+{
+	int err;
+
+	if (mask != 0xffffffff) {
+		err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
+					      CMDQ_GET_ARG_B(~mask),
+					      0, 0, 0, 0, 0, CMDQ_CODE_MASK);
+
+		if (err != 0)
+			return err;
+	}
+	offset = offset | 0x1;
+
+	return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
+				       CMDQ_GET_ARG_B(value),
+				       offset, subsys, 0, 0, 0, CMDQ_CODE_POLL);
+}
+EXPORT_SYMBOL(cmdq_pkt_poll);
+
 static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
 {
 	int err;
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index f21801d..1dfd5ed 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -46,6 +46,7 @@
 enum cmdq_code {
 	CMDQ_CODE_MASK = 0x02,
 	CMDQ_CODE_WRITE = 0x04,
+	CMDQ_CODE_POLL = 0x08,
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 52f69c8..0651a0b 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -100,6 +100,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
 int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
 
 /**
+ * cmdq_pkt_poll() - Append polling command to the CMDQ packet, ask GCE to
+ *		     execute an instruction that wait for a specified hardware
+ *		     register to check for the value. All GCE hardware
+ *		     threads will be blocked by this instruction.
+ * @pkt:	the CMDQ packet
+ * @subsys:	the CMDQ sub system code
+ * @offset:	register offset from CMDQ sub system
+ * @value:	the specified target register value
+ * @mask:	the specified target register mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
+		  u16 offset, u32 value, u32 mask);
+/**
  * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
  *                          packet and call back at the end of done packet
  * @pkt:	the CMDQ packet
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 08/10] soc: mediatek: cmdq: add polling function

[Pi-Hsun Shih]

On Wed, Mar 6, 2019 at 5:51 PM Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index d3873ab..71c167c 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -231,6 +231,27 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
>  }
>  EXPORT_SYMBOL(cmdq_pkt_clear_event);
>
> +int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
> +                 u16 offset, u32 value, u32 mask)
> +{
> +       int err;
> +
> +       if (mask != 0xffffffff) {
> +               err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
> +                                             CMDQ_GET_ARG_B(~mask),
> +                                             0, 0, 0, 0, 0, CMDQ_CODE_MASK);

All other codes use CMDQ_IMMEDIATE_VALUE instead of 0 for arguments of
cmdq_pkt_append_command. Also use CMDQ_IMMEDIATE_VALUE here?

> +
> +               if (err != 0)
> +                       return err;
> +       }
> +       offset = offset | 0x1;
> +
> +       return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
> +                                      CMDQ_GET_ARG_B(value),
> +                                      offset, subsys, 0, 0, 0, CMDQ_CODE_POLL);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_poll);
> +

Re: [PATCH v2 08/10] soc: mediatek: cmdq: add polling function

[Pi-Hsun Shih]

On Wed, Mar 6, 2019 at 5:51 PM Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index d3873ab..71c167c 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -231,6 +231,27 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
>  }
>  EXPORT_SYMBOL(cmdq_pkt_clear_event);
>
> +int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
> +                 u16 offset, u32 value, u32 mask)
> +{
> +       int err;
> +
> +       if (mask != 0xffffffff) {
> +               err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
> +                                             CMDQ_GET_ARG_B(~mask),
> +                                             0, 0, 0, 0, 0, CMDQ_CODE_MASK);

All other codes use CMDQ_IMMEDIATE_VALUE instead of 0 for arguments of
cmdq_pkt_append_command. Also use CMDQ_IMMEDIATE_VALUE here?

> +
> +               if (err != 0)
> +                       return err;
> +       }
> +       offset = offset | 0x1;
> +
> +       return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
> +                                      CMDQ_GET_ARG_B(value),
> +                                      offset, subsys, 0, 0, 0, CMDQ_CODE_POLL);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_poll);
> +

Re: [PATCH v2 08/10] soc: mediatek: cmdq: add polling function

[Pi-Hsun Shih]

On Wed, Mar 6, 2019 at 5:51 PM Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index d3873ab..71c167c 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -231,6 +231,27 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
>  }
>  EXPORT_SYMBOL(cmdq_pkt_clear_event);
>
> +int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
> +                 u16 offset, u32 value, u32 mask)
> +{
> +       int err;
> +
> +       if (mask != 0xffffffff) {
> +               err = cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(~mask),
> +                                             CMDQ_GET_ARG_B(~mask),
> +                                             0, 0, 0, 0, 0, CMDQ_CODE_MASK);

All other codes use CMDQ_IMMEDIATE_VALUE instead of 0 for arguments of
cmdq_pkt_append_command. Also use CMDQ_IMMEDIATE_VALUE here?

> +
> +               if (err != 0)
> +                       return err;
> +       }
> +       offset = offset | 0x1;
> +
> +       return cmdq_pkt_append_command(pkt, CMDQ_GET_ARG_C(value),
> +                                      CMDQ_GET_ARG_B(value),
> +                                      offset, subsys, 0, 0, 0, CMDQ_CODE_POLL);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_poll);
> +

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 09/10] soc: mediatek: cmdq: add cmdq_dev_get_subsys function

[Bibby Hsieh]

GCE cannot know the register base address, this function
can help cmdq client to get the relationship of subsys
and register base address.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 24 ++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 17 +++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 71c167c..0a9609e 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -47,6 +47,30 @@ static void cmdq_pkt_instr_encoder(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
 	pkt->cmd_buf_size += CMDQ_INST_SIZE;
 }
 
+struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx)
+{
+	struct cmdq_subsys *subsys;
+	struct of_phandle_args spec;
+
+	subsys = devm_kzalloc(dev, sizeof(*subsys), GFP_KERNEL);
+	if (!subsys)
+		return NULL;
+
+	if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-subsys",
+				       "#subsys-cells", idx, &spec)) {
+		dev_err(dev, "can't parse gce-subsys property");
+
+		return -ENODEV;
+	}
+
+	subsys->base = spec.args[0];
+	subsys->id = spec.args[1];
+	of_node_put(spec.np);
+
+	return subsys;
+}
+EXPORT_SYMBOL(cmdq_dev_get_subsys);
+
 static void cmdq_client_timeout(struct timer_list *t)
 {
 	struct cmdq_client *client = from_timer(client, t, timer);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 0651a0b..e39ba1e 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -15,6 +15,11 @@
 
 struct cmdq_pkt;
 
+struct cmdq_subsys {
+	u32 base;
+	u8 id;
+};
+
 struct cmdq_client {
 	spinlock_t lock;
 	u32 pkt_cnt;
@@ -142,4 +147,16 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
  */
 int cmdq_pkt_flush(struct cmdq_pkt *pkt);
 
+/**
+ * cmdq_dev_get_subsys() - parse sub system from the device node of CMDQ client
+ * @dev:	device of CMDQ mailbox client
+ * @idx:	the index of desired subsys
+ *
+ * Return: CMDQ subsys pointer
+ *
+ * Help CMDQ client pasing the sub system number
+ * from the device node of CMDQ client.
+ */
+struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx);
+
 #endif	/* __MTK_CMDQ_H__ */
-- 
1.9.1

[PATCH v2 09/10] soc: mediatek: cmdq: add cmdq_dev_get_subsys function

[Bibby Hsieh]

GCE cannot know the register base address, this function
can help cmdq client to get the relationship of subsys
and register base address.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 24 ++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 17 +++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 71c167c..0a9609e 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -47,6 +47,30 @@ static void cmdq_pkt_instr_encoder(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
 	pkt->cmd_buf_size += CMDQ_INST_SIZE;
 }
 
+struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx)
+{
+	struct cmdq_subsys *subsys;
+	struct of_phandle_args spec;
+
+	subsys = devm_kzalloc(dev, sizeof(*subsys), GFP_KERNEL);
+	if (!subsys)
+		return NULL;
+
+	if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-subsys",
+				       "#subsys-cells", idx, &spec)) {
+		dev_err(dev, "can't parse gce-subsys property");
+
+		return -ENODEV;
+	}
+
+	subsys->base = spec.args[0];
+	subsys->id = spec.args[1];
+	of_node_put(spec.np);
+
+	return subsys;
+}
+EXPORT_SYMBOL(cmdq_dev_get_subsys);
+
 static void cmdq_client_timeout(struct timer_list *t)
 {
 	struct cmdq_client *client = from_timer(client, t, timer);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 0651a0b..e39ba1e 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -15,6 +15,11 @@
 
 struct cmdq_pkt;
 
+struct cmdq_subsys {
+	u32 base;
+	u8 id;
+};
+
 struct cmdq_client {
 	spinlock_t lock;
 	u32 pkt_cnt;
@@ -142,4 +147,16 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
  */
 int cmdq_pkt_flush(struct cmdq_pkt *pkt);
 
+/**
+ * cmdq_dev_get_subsys() - parse sub system from the device node of CMDQ client
+ * @dev:	device of CMDQ mailbox client
+ * @idx:	the index of desired subsys
+ *
+ * Return: CMDQ subsys pointer
+ *
+ * Help CMDQ client pasing the sub system number
+ * from the device node of CMDQ client.
+ */
+struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx);
+
 #endif	/* __MTK_CMDQ_H__ */
-- 
1.9.1

[PATCH v2 09/10] soc: mediatek: cmdq: add cmdq_dev_get_subsys function

[Bibby Hsieh]

GCE cannot know the register base address, this function
can help cmdq client to get the relationship of subsys
and register base address.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 24 ++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 17 +++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 71c167c..0a9609e 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -47,6 +47,30 @@ static void cmdq_pkt_instr_encoder(struct cmdq_pkt *pkt, s16 arg_c, s16 arg_b,
 	pkt->cmd_buf_size += CMDQ_INST_SIZE;
 }
 
+struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx)
+{
+	struct cmdq_subsys *subsys;
+	struct of_phandle_args spec;
+
+	subsys = devm_kzalloc(dev, sizeof(*subsys), GFP_KERNEL);
+	if (!subsys)
+		return NULL;
+
+	if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-subsys",
+				       "#subsys-cells", idx, &spec)) {
+		dev_err(dev, "can't parse gce-subsys property");
+
+		return -ENODEV;
+	}
+
+	subsys->base = spec.args[0];
+	subsys->id = spec.args[1];
+	of_node_put(spec.np);
+
+	return subsys;
+}
+EXPORT_SYMBOL(cmdq_dev_get_subsys);
+
 static void cmdq_client_timeout(struct timer_list *t)
 {
 	struct cmdq_client *client = from_timer(client, t, timer);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 0651a0b..e39ba1e 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -15,6 +15,11 @@
 
 struct cmdq_pkt;
 
+struct cmdq_subsys {
+	u32 base;
+	u8 id;
+};
+
 struct cmdq_client {
 	spinlock_t lock;
 	u32 pkt_cnt;
@@ -142,4 +147,16 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
  */
 int cmdq_pkt_flush(struct cmdq_pkt *pkt);
 
+/**
+ * cmdq_dev_get_subsys() - parse sub system from the device node of CMDQ client
+ * @dev:	device of CMDQ mailbox client
+ * @idx:	the index of desired subsys
+ *
+ * Return: CMDQ subsys pointer
+ *
+ * Help CMDQ client pasing the sub system number
+ * from the device node of CMDQ client.
+ */
+struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx);
+
 #endif	/* __MTK_CMDQ_H__ */
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 10/10] soc: mediatek: cmdq: add cmdq_dev_get_event function

[Bibby Hsieh]

When client ask gce to clear or wait for event,
client need to pass event number to the API.
We suggest client store the event information in device node,
so we provide an API for client parse the event property.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 32 ++++++++++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 12 ++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 0a9609e..ab49673 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -71,6 +71,38 @@ struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx)
 }
 EXPORT_SYMBOL(cmdq_dev_get_subsys);
 
+s32 cmdq_dev_get_event(struct device *dev, const char *name)
+{
+	s32 index = 0;
+	struct of_phandle_args spec;
+	s32 result;
+
+	if (!dev)
+		return -EINVAL;
+
+	index = of_property_match_string(dev->of_node,
+					 "mediatek,gce-event-names", name);
+	if (index < 0) {
+		dev_err(dev, "no gce-event-names property or no such event:%s",
+			name);
+
+		return index;
+	}
+
+	if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-events",
+				       "#event-cells", index, &spec)) {
+		dev_err(dev, "can't parse gce-events property");
+
+		return -ENODEV;
+	}
+
+	result = spec.args[0];
+	of_node_put(spec.np);
+
+	return result;
+}
+EXPORT_SYMBOL(cmdq_dev_get_event);
+
 static void cmdq_client_timeout(struct timer_list *t)
 {
 	struct cmdq_client *client = from_timer(client, t, timer);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index e39ba1e..2abfb45 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -159,4 +159,16 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
  */
 struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx);
 
+/**
+ * cmdq_dev_get_event() - parse event from the device node of CMDQ client
+ * @dev:	device of CMDQ mailbox client
+ * @name:	the name of desired event
+ *
+ * Return: CMDQ event number
+ *
+ * Help CMDQ client pasing the event number
+ * from the device node of CMDQ client.
+ */
+s32 cmdq_dev_get_event(struct device *dev, const char *name);
+
 #endif	/* __MTK_CMDQ_H__ */
-- 
1.9.1

[PATCH v2 10/10] soc: mediatek: cmdq: add cmdq_dev_get_event function

[Bibby Hsieh]

When client ask gce to clear or wait for event,
client need to pass event number to the API.
We suggest client store the event information in device node,
so we provide an API for client parse the event property.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 32 ++++++++++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 12 ++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 0a9609e..ab49673 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -71,6 +71,38 @@ struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx)
 }
 EXPORT_SYMBOL(cmdq_dev_get_subsys);
 
+s32 cmdq_dev_get_event(struct device *dev, const char *name)
+{
+	s32 index = 0;
+	struct of_phandle_args spec;
+	s32 result;
+
+	if (!dev)
+		return -EINVAL;
+
+	index = of_property_match_string(dev->of_node,
+					 "mediatek,gce-event-names", name);
+	if (index < 0) {
+		dev_err(dev, "no gce-event-names property or no such event:%s",
+			name);
+
+		return index;
+	}
+
+	if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-events",
+				       "#event-cells", index, &spec)) {
+		dev_err(dev, "can't parse gce-events property");
+
+		return -ENODEV;
+	}
+
+	result = spec.args[0];
+	of_node_put(spec.np);
+
+	return result;
+}
+EXPORT_SYMBOL(cmdq_dev_get_event);
+
 static void cmdq_client_timeout(struct timer_list *t)
 {
 	struct cmdq_client *client = from_timer(client, t, timer);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index e39ba1e..2abfb45 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -159,4 +159,16 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
  */
 struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx);
 
+/**
+ * cmdq_dev_get_event() - parse event from the device node of CMDQ client
+ * @dev:	device of CMDQ mailbox client
+ * @name:	the name of desired event
+ *
+ * Return: CMDQ event number
+ *
+ * Help CMDQ client pasing the event number
+ * from the device node of CMDQ client.
+ */
+s32 cmdq_dev_get_event(struct device *dev, const char *name);
+
 #endif	/* __MTK_CMDQ_H__ */
-- 
1.9.1

[PATCH v2 10/10] soc: mediatek: cmdq: add cmdq_dev_get_event function

[Bibby Hsieh]

When client ask gce to clear or wait for event,
client need to pass event number to the API.
We suggest client store the event information in device node,
so we provide an API for client parse the event property.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 32 ++++++++++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 12 ++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 0a9609e..ab49673 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -71,6 +71,38 @@ struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx)
 }
 EXPORT_SYMBOL(cmdq_dev_get_subsys);
 
+s32 cmdq_dev_get_event(struct device *dev, const char *name)
+{
+	s32 index = 0;
+	struct of_phandle_args spec;
+	s32 result;
+
+	if (!dev)
+		return -EINVAL;
+
+	index = of_property_match_string(dev->of_node,
+					 "mediatek,gce-event-names", name);
+	if (index < 0) {
+		dev_err(dev, "no gce-event-names property or no such event:%s",
+			name);
+
+		return index;
+	}
+
+	if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-events",
+				       "#event-cells", index, &spec)) {
+		dev_err(dev, "can't parse gce-events property");
+
+		return -ENODEV;
+	}
+
+	result = spec.args[0];
+	of_node_put(spec.np);
+
+	return result;
+}
+EXPORT_SYMBOL(cmdq_dev_get_event);
+
 static void cmdq_client_timeout(struct timer_list *t)
 {
 	struct cmdq_client *client = from_timer(client, t, timer);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index e39ba1e..2abfb45 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -159,4 +159,16 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
  */
 struct cmdq_subsys *cmdq_dev_get_subsys(struct device *dev, int idx);
 
+/**
+ * cmdq_dev_get_event() - parse event from the device node of CMDQ client
+ * @dev:	device of CMDQ mailbox client
+ * @name:	the name of desired event
+ *
+ * Return: CMDQ event number
+ *
+ * Help CMDQ client pasing the event number
+ * from the device node of CMDQ client.
+ */
+s32 cmdq_dev_get_event(struct device *dev, const char *name);
+
 #endif	/* __MTK_CMDQ_H__ */
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel