All of lore.kernel.org
 help / color / mirror / Atom feed
From: Viorel Suman <viorel.suman@nxp.com>
To: Daniel Baluta <daniel.baluta@nxp.com>,
	"broonie@kernel.org" <broonie@kernel.org>
Cc: dl-linux-imx <linux-imx@nxp.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	"timur@kernel.org" <timur@kernel.org>,
	"Xiubo.Lee@gmail.com" <Xiubo.Lee@gmail.com>,
	"nicoleotsuka@gmail.com" <nicoleotsuka@gmail.com>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"tiwai@suse.com" <tiwai@suse.com>,
	"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
	"S.j. Wang" <shengjiu.wang@nxp.com>,
	"perex@perex.cz" <perex@perex.cz>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: Re: [PATCH 3/3 v3] ASoC: fsl_sai: Move clock operation to PM runtime
Date: Mon, 22 Apr 2019 11:06:12 +0000	[thread overview]
Message-ID: <1555931172.31656.6.camel@nxp.com> (raw)
In-Reply-To: <20190421193853.10188-4-daniel.baluta@nxp.com>

Hi Daniel,

On Du, 2019-04-21 at 19:39 +0000, Daniel Baluta wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
> 
> Turn off/on clocks when device enters suspend/resume. This
> can help saving power.
> 
> As a further optimization, we turn off/on mclk only when SAI
> is in master mode because otherwise mclk is externally provided.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  sound/soc/fsl/fsl_sai.c | 60 ++++++++++++++++++++++++++++++++++-------
>  1 file changed, 50 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index 8623b7f882b9..13a462360ed3 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c
> @@ -596,15 +596,8 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
>  {
>  	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
>  	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> -	struct device *dev = &sai->pdev->dev;
>  	int ret;
>  
> -	ret = clk_prepare_enable(sai->bus_clk);
> -	if (ret) {
> -		dev_err(dev, "failed to enable bus clock: %d\n", ret);
> -		return ret;
> -	}
> -
>  	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE,
>  			   FSL_SAI_CR3_TRCE);
>  
> @@ -621,8 +614,6 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream,
>  	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
>  
>  	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
> -
> -	clk_disable_unprepare(sai->bus_clk);
>  }
>  
>  static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
> @@ -932,6 +923,16 @@ static int fsl_sai_runtime_suspend(struct device *dev)
>  {
>  	struct fsl_sai *sai = dev_get_drvdata(dev);
>  
> +	if (!sai->is_slave_mode) {
This check is redundant as the bits in sai->mclk_streams are set/unset for master
mode only, please check fsl_sai_hw_params and fsl_sai_hw_free functions.

> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
> +			clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
> +
> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
> +			clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
> +	}
> +
> +	clk_disable_unprepare(sai->bus_clk);
> +
>  	regcache_cache_only(sai->regmap, true);
>  	regcache_mark_dirty(sai->regmap);
>  
> @@ -941,6 +942,27 @@ static int fsl_sai_runtime_suspend(struct device *dev)
>  static int fsl_sai_runtime_resume(struct device *dev)
>  {
>  	struct fsl_sai *sai = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(sai->bus_clk);
> +	if (ret) {
> +		dev_err(dev, "failed to enable bus clock: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (!sai->is_slave_mode) {
> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
> +			ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
> +			if (ret)
> +				goto disable_bus_clk;
> +		}
> +
> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
> +			ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
> +			if (ret)
> +				goto disable_tx_clk;
> +		}
> +	}
>  
>  	regcache_cache_only(sai->regmap, false);
>  	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
> @@ -948,7 +970,25 @@ static int fsl_sai_runtime_resume(struct device *dev)
>  	usleep_range(1000, 2000);
>  	regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
>  	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
> -	return regcache_sync(sai->regmap);
> +
> +	ret = regcache_sync(sai->regmap);
> +	if (ret)
> +		goto disable_rx_clk;
> +
> +	return 0;
> +
> +disable_rx_clk:
> +	if (!sai->is_slave_mode &&
> +	    (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)))
> +		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
> +disable_tx_clk:
> +	if (!sai->is_slave_mode &&
> +	    (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)))
> +		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
> +disable_bus_clk:
> +	clk_disable_unprepare(sai->bus_clk);
> +
> +	return ret;
>  }
>  #endif /* CONFIG_PM */
>  
> -- 
> 2.17.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Viorel Suman <viorel.suman@nxp.com>
To: Daniel Baluta <daniel.baluta@nxp.com>,
	"broonie@kernel.org" <broonie@kernel.org>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
	"timur@kernel.org" <timur@kernel.org>,
	"Xiubo.Lee@gmail.com" <Xiubo.Lee@gmail.com>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"S.j. Wang" <shengjiu.wang@nxp.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"tiwai@suse.com" <tiwai@suse.com>,
	"nicoleotsuka@gmail.com" <nicoleotsuka@gmail.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	"perex@perex.cz" <perex@perex.cz>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH 3/3 v3] ASoC: fsl_sai: Move clock operation to PM runtime
Date: Mon, 22 Apr 2019 11:06:12 +0000	[thread overview]
Message-ID: <1555931172.31656.6.camel@nxp.com> (raw)
In-Reply-To: <20190421193853.10188-4-daniel.baluta@nxp.com>

Hi Daniel,

On Du, 2019-04-21 at 19:39 +0000, Daniel Baluta wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
> 
> Turn off/on clocks when device enters suspend/resume. This
> can help saving power.
> 
> As a further optimization, we turn off/on mclk only when SAI
> is in master mode because otherwise mclk is externally provided.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  sound/soc/fsl/fsl_sai.c | 60 ++++++++++++++++++++++++++++++++++-------
>  1 file changed, 50 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index 8623b7f882b9..13a462360ed3 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c
> @@ -596,15 +596,8 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
>  {
>  	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
>  	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> -	struct device *dev = &sai->pdev->dev;
>  	int ret;
>  
> -	ret = clk_prepare_enable(sai->bus_clk);
> -	if (ret) {
> -		dev_err(dev, "failed to enable bus clock: %d\n", ret);
> -		return ret;
> -	}
> -
>  	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE,
>  			   FSL_SAI_CR3_TRCE);
>  
> @@ -621,8 +614,6 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream,
>  	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
>  
>  	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
> -
> -	clk_disable_unprepare(sai->bus_clk);
>  }
>  
>  static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
> @@ -932,6 +923,16 @@ static int fsl_sai_runtime_suspend(struct device *dev)
>  {
>  	struct fsl_sai *sai = dev_get_drvdata(dev);
>  
> +	if (!sai->is_slave_mode) {
This check is redundant as the bits in sai->mclk_streams are set/unset for master
mode only, please check fsl_sai_hw_params and fsl_sai_hw_free functions.

> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
> +			clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
> +
> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
> +			clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
> +	}
> +
> +	clk_disable_unprepare(sai->bus_clk);
> +
>  	regcache_cache_only(sai->regmap, true);
>  	regcache_mark_dirty(sai->regmap);
>  
> @@ -941,6 +942,27 @@ static int fsl_sai_runtime_suspend(struct device *dev)
>  static int fsl_sai_runtime_resume(struct device *dev)
>  {
>  	struct fsl_sai *sai = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(sai->bus_clk);
> +	if (ret) {
> +		dev_err(dev, "failed to enable bus clock: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (!sai->is_slave_mode) {
> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
> +			ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
> +			if (ret)
> +				goto disable_bus_clk;
> +		}
> +
> +		if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
> +			ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
> +			if (ret)
> +				goto disable_tx_clk;
> +		}
> +	}
>  
>  	regcache_cache_only(sai->regmap, false);
>  	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
> @@ -948,7 +970,25 @@ static int fsl_sai_runtime_resume(struct device *dev)
>  	usleep_range(1000, 2000);
>  	regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
>  	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
> -	return regcache_sync(sai->regmap);
> +
> +	ret = regcache_sync(sai->regmap);
> +	if (ret)
> +		goto disable_rx_clk;
> +
> +	return 0;
> +
> +disable_rx_clk:
> +	if (!sai->is_slave_mode &&
> +	    (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)))
> +		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
> +disable_tx_clk:
> +	if (!sai->is_slave_mode &&
> +	    (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)))
> +		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
> +disable_bus_clk:
> +	clk_disable_unprepare(sai->bus_clk);
> +
> +	return ret;
>  }
>  #endif /* CONFIG_PM */
>  
> -- 
> 2.17.1
> 

  parent reply	other threads:[~2019-04-22 11:06 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-21 19:39 [PATCH 0/3] Add runtime PM for SAI digital audio interface Daniel Baluta
2019-04-21 19:39 ` Daniel Baluta
2019-04-21 19:39 ` [PATCH 1/3 v2] ASoC: fsl_sai: Update is_slave_mode with correct value Daniel Baluta
2019-04-21 19:39   ` Daniel Baluta
2019-04-22  1:08   ` Nicolin Chen
2019-04-22  1:08     ` Nicolin Chen
2019-04-25 19:24   ` Applied "ASoC: fsl_sai: Update is_slave_mode with correct value" to the asoc tree Mark Brown
2019-04-25 19:24     ` Mark Brown
2019-04-25 19:26   ` Mark Brown
2019-04-25 19:26     ` Mark Brown
2019-04-21 19:39 ` [PATCH 2/3 v2] ASoC: fsl_sai: Add support for runtime pm Daniel Baluta
2019-04-21 19:39   ` Daniel Baluta
2019-04-22  1:09   ` Nicolin Chen
2019-04-22  1:09     ` Nicolin Chen
2019-04-26 10:00   ` Mark Brown
2019-04-26 10:00     ` Mark Brown
2019-04-26 12:10     ` Daniel Baluta
2019-04-26 12:10       ` Daniel Baluta
2019-04-27 17:17       ` Mark Brown
2019-04-27 17:17         ` Mark Brown
2019-04-21 19:39 ` [PATCH 3/3 v3] ASoC: fsl_sai: Move clock operation to PM runtime Daniel Baluta
2019-04-21 19:39   ` Daniel Baluta
2019-04-22  1:20   ` Nicolin Chen
2019-04-22  1:20     ` Nicolin Chen
2019-04-22 11:06   ` Viorel Suman [this message]
2019-04-22 11:06     ` Viorel Suman
2019-04-22 11:25     ` [alsa-devel] " Daniel Baluta
2019-04-22 11:25       ` Daniel Baluta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1555931172.31656.6.camel@nxp.com \
    --to=viorel.suman@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=festevam@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=shengjiu.wang@nxp.com \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.