From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Daniel Kurtz <djkurtz@chromium.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
Sascha Hauer <kernel@pengutronix.de>,
Philipp Zabel <p.zabel@pengutronix.de>,
Nicolas Boichat <drinkcat@chromium.org>,
YT Shen <yt.shen@mediatek.com>,
Daoyuan Huang <daoyuan.huang@mediatek.com>,
Jiaguang Zhang <jiaguang.zhang@mediatek.com>,
Dennis-YC Hsieh <dennis-yc.hsieh@mediatek.com>,
Houlong Wei <houlong.wei@mediatek.com>,
ginny.chen@mediatek.com, kendrick.hsu@mediatek.com
Subject: Re: [PATCH v5 08/12] soc: mediatek: cmdq: define the instruction struct
Date: Wed, 8 May 2019 13:40:46 +0800 [thread overview]
Message-ID: <1557294046.3936.14.camel@mtksdaap41> (raw)
In-Reply-To: <20190507081355.52630-9-bibby.hsieh@mediatek.com>
Hi, Bibby:
On Tue, 2019-05-07 at 16:13 +0800, Bibby Hsieh wrote:
> Define a instruction structure for gce driver to append command.
I would like you to describe _WHY_ do this. I think you do this for
'code readability'.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 113 +++++++++++++++--------
> include/linux/mailbox/mtk-cmdq-mailbox.h | 2 +
> include/linux/soc/mediatek/mtk-cmdq.h | 14 +--
> 3 files changed, 84 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index ff9fef5a032b..17ee8196fb3d 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -9,12 +9,24 @@
> #include <linux/mailbox_controller.h>
> #include <linux/soc/mediatek/mtk-cmdq.h>
>
> -#define CMDQ_ARG_A_WRITE_MASK 0xffff
> #define CMDQ_WRITE_ENABLE_MASK BIT(0)
> #define CMDQ_EOC_IRQ_EN BIT(0)
> #define CMDQ_EOC_CMD ((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> << 32 | CMDQ_EOC_IRQ_EN)
>
> +struct cmdq_instruction {
> + union {
> + u32 value;
> + u32 mask;
> + };
> + union {
> + u16 offset;
> + u16 event;
> + };
> + u8 subsys;
> + u8 op;
> +};
> +
> static void cmdq_client_timeout(struct timer_list *t)
> {
> struct cmdq_client *client = from_timer(client, t, timer);
> @@ -110,10 +122,8 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> }
> EXPORT_SYMBOL(cmdq_pkt_destroy);
>
> -static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> - u32 arg_a, u32 arg_b)
> +static struct cmdq_instruction *cmdq_pkt_append_command(struct cmdq_pkt *pkt)
> {
> - u64 *cmd_ptr;
>
> if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> /*
> @@ -127,81 +137,108 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
> WARN_ONCE(1, "%s: buffer size %u is too small !\n",
> __func__, (u32)pkt->buf_size);
> - return -ENOMEM;
> + return NULL;
> }
> - cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> - (*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> +
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
>
> - return 0;
> + return pkt->va_base + pkt->cmd_buf_size - CMDQ_INST_SIZE;
> }
>
> -int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
> {
> - u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
> - (subsys << CMDQ_SUBSYS_SHIFT);
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WRITE;
> + inst->value = value;
> + inst->offset = offset;
> + inst->subsys = subsys;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_write);
>
> -int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> - u32 subsys, u32 offset, u32 mask)
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
> + u32 value, u32 mask)
> {
> + struct cmdq_instruction *inst;
> u32 offset_mask = offset;
> - int err = 0;
>
> if (mask != 0xffffffff) {
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_MASK;
> + inst->mask = ~mask;
> offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> }
> - err |= cmdq_pkt_write(pkt, value, subsys, offset_mask);
>
> - return err;
> + return cmdq_pkt_write(pkt, subsys, offset_mask, value);
> }
> EXPORT_SYMBOL(cmdq_pkt_write_mask);
>
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> {
> - u32 arg_b;
> + struct cmdq_instruction *inst;
>
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - /*
> - * WFE arg_b
> - * bit 0-11: wait value
> - * bit 15: 1 - wait, 0 - no wait
> - * bit 16-27: update value
> - * bit 31: 1 - update, 0 - no update
> - */
> - arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_OPTION;
> + inst->event = event;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event, arg_b);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_wfe);
>
> -int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
> {
> + struct cmdq_instruction *inst;
> +
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event,
> - CMDQ_WFE_UPDATE);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_UPDATE;
> + inst->event = event;
> +
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_clear_event);
>
> static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> {
> - int err;
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
>
> - /* insert EOC and generate IRQ for each command iteration */
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> + inst->op = CMDQ_CODE_EOC;
> + inst->value = CMDQ_EOC_IRQ_EN;
>
> - /* JUMP to end */
> - err |= cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_JUMP;
> + inst->value = CMDQ_JUMP_PASS;
>
> - return err;
> + return 0;
> }
>
> static void cmdq_pkt_flush_async_cb(struct cmdq_cb_data data)
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 911475da7a53..f21801d32a3a 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
> #define CMDQ_WFE_UPDATE BIT(31)
> #define CMDQ_WFE_WAIT BIT(15)
> #define CMDQ_WFE_WAIT_VALUE 0x1
> +#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
Use a 'tab' to replace 8 white space.
> + CMDQ_WFE_WAIT_VALUE)
> /** cmdq event maximum */
> #define CMDQ_MAX_EVENT 0x3ff
>
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 4e8899972db4..52f69c8db8de 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -60,26 +60,26 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> /**
> * cmdq_pkt_write() - append write command to the CMDQ packet
> * @pkt: the CMDQ packet
> - * @value: the specified target register value
> * @subsys: the CMDQ sub system code
> * @offset: register offset from CMDQ sub system
> + * @value: the specified target register value
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset);
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
>
> /**
> * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> * @pkt: the CMDQ packet
> - * @value: the specified target register value
> * @subsys: the CMDQ sub system code
> * @offset: register offset from CMDQ sub system
> + * @value: the specified target register value
> * @mask: the specified target register mask
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> - u32 subsys, u32 offset, u32 mask);
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
> + u32 value, u32 mask);
Is the changing of parameter position about 'code readability'?
>
> /**
> * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> @@ -88,7 +88,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
Is the changing from u32 to u16 about 'code readability'?
Regards,
CK
>
> /**
> * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> @@ -97,7 +97,7 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event);
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
>
> /**
> * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: devicetree@vger.kernel.org,
Nicolas Boichat <drinkcat@chromium.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
srv_heupstream@mediatek.com, kendrick.hsu@mediatek.com,
Daoyuan Huang <daoyuan.huang@mediatek.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Jassi Brar <jassisinghbrar@gmail.com>,
linux-kernel@vger.kernel.org, Daniel Kurtz <djkurtz@chromium.org>,
Dennis-YC Hsieh <dennis-yc.hsieh@mediatek.com>,
YT Shen <yt.shen@mediatek.com>, Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Houlong Wei <houlong.wei@mediatek.com>,
Sascha Hauer <kernel@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
Jiaguang Zhang <jiaguang.zhang@mediatek.com>,
Frederic Chen <Frederic.Chen@mediatek.com>,
linux-arm-kernel@lists.infradead.org, ginny.chen@mediatek.com
Subject: Re: [PATCH v5 08/12] soc: mediatek: cmdq: define the instruction struct
Date: Wed, 8 May 2019 13:40:46 +0800 [thread overview]
Message-ID: <1557294046.3936.14.camel@mtksdaap41> (raw)
In-Reply-To: <20190507081355.52630-9-bibby.hsieh@mediatek.com>
Hi, Bibby:
On Tue, 2019-05-07 at 16:13 +0800, Bibby Hsieh wrote:
> Define a instruction structure for gce driver to append command.
I would like you to describe _WHY_ do this. I think you do this for
'code readability'.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 113 +++++++++++++++--------
> include/linux/mailbox/mtk-cmdq-mailbox.h | 2 +
> include/linux/soc/mediatek/mtk-cmdq.h | 14 +--
> 3 files changed, 84 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index ff9fef5a032b..17ee8196fb3d 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -9,12 +9,24 @@
> #include <linux/mailbox_controller.h>
> #include <linux/soc/mediatek/mtk-cmdq.h>
>
> -#define CMDQ_ARG_A_WRITE_MASK 0xffff
> #define CMDQ_WRITE_ENABLE_MASK BIT(0)
> #define CMDQ_EOC_IRQ_EN BIT(0)
> #define CMDQ_EOC_CMD ((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> << 32 | CMDQ_EOC_IRQ_EN)
>
> +struct cmdq_instruction {
> + union {
> + u32 value;
> + u32 mask;
> + };
> + union {
> + u16 offset;
> + u16 event;
> + };
> + u8 subsys;
> + u8 op;
> +};
> +
> static void cmdq_client_timeout(struct timer_list *t)
> {
> struct cmdq_client *client = from_timer(client, t, timer);
> @@ -110,10 +122,8 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> }
> EXPORT_SYMBOL(cmdq_pkt_destroy);
>
> -static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> - u32 arg_a, u32 arg_b)
> +static struct cmdq_instruction *cmdq_pkt_append_command(struct cmdq_pkt *pkt)
> {
> - u64 *cmd_ptr;
>
> if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> /*
> @@ -127,81 +137,108 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
> WARN_ONCE(1, "%s: buffer size %u is too small !\n",
> __func__, (u32)pkt->buf_size);
> - return -ENOMEM;
> + return NULL;
> }
> - cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> - (*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> +
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
>
> - return 0;
> + return pkt->va_base + pkt->cmd_buf_size - CMDQ_INST_SIZE;
> }
>
> -int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
> {
> - u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
> - (subsys << CMDQ_SUBSYS_SHIFT);
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WRITE;
> + inst->value = value;
> + inst->offset = offset;
> + inst->subsys = subsys;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_write);
>
> -int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> - u32 subsys, u32 offset, u32 mask)
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
> + u32 value, u32 mask)
> {
> + struct cmdq_instruction *inst;
> u32 offset_mask = offset;
> - int err = 0;
>
> if (mask != 0xffffffff) {
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_MASK;
> + inst->mask = ~mask;
> offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> }
> - err |= cmdq_pkt_write(pkt, value, subsys, offset_mask);
>
> - return err;
> + return cmdq_pkt_write(pkt, subsys, offset_mask, value);
> }
> EXPORT_SYMBOL(cmdq_pkt_write_mask);
>
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> {
> - u32 arg_b;
> + struct cmdq_instruction *inst;
>
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - /*
> - * WFE arg_b
> - * bit 0-11: wait value
> - * bit 15: 1 - wait, 0 - no wait
> - * bit 16-27: update value
> - * bit 31: 1 - update, 0 - no update
> - */
> - arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_OPTION;
> + inst->event = event;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event, arg_b);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_wfe);
>
> -int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
> {
> + struct cmdq_instruction *inst;
> +
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event,
> - CMDQ_WFE_UPDATE);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_UPDATE;
> + inst->event = event;
> +
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_clear_event);
>
> static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> {
> - int err;
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
>
> - /* insert EOC and generate IRQ for each command iteration */
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> + inst->op = CMDQ_CODE_EOC;
> + inst->value = CMDQ_EOC_IRQ_EN;
>
> - /* JUMP to end */
> - err |= cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_JUMP;
> + inst->value = CMDQ_JUMP_PASS;
>
> - return err;
> + return 0;
> }
>
> static void cmdq_pkt_flush_async_cb(struct cmdq_cb_data data)
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 911475da7a53..f21801d32a3a 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
> #define CMDQ_WFE_UPDATE BIT(31)
> #define CMDQ_WFE_WAIT BIT(15)
> #define CMDQ_WFE_WAIT_VALUE 0x1
> +#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
Use a 'tab' to replace 8 white space.
> + CMDQ_WFE_WAIT_VALUE)
> /** cmdq event maximum */
> #define CMDQ_MAX_EVENT 0x3ff
>
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 4e8899972db4..52f69c8db8de 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -60,26 +60,26 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> /**
> * cmdq_pkt_write() - append write command to the CMDQ packet
> * @pkt: the CMDQ packet
> - * @value: the specified target register value
> * @subsys: the CMDQ sub system code
> * @offset: register offset from CMDQ sub system
> + * @value: the specified target register value
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset);
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
>
> /**
> * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> * @pkt: the CMDQ packet
> - * @value: the specified target register value
> * @subsys: the CMDQ sub system code
> * @offset: register offset from CMDQ sub system
> + * @value: the specified target register value
> * @mask: the specified target register mask
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> - u32 subsys, u32 offset, u32 mask);
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
> + u32 value, u32 mask);
Is the changing of parameter position about 'code readability'?
>
> /**
> * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> @@ -88,7 +88,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
Is the changing from u32 to u16 about 'code readability'?
Regards,
CK
>
> /**
> * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> @@ -97,7 +97,7 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event);
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
>
> /**
> * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Daniel Kurtz <djkurtz@chromium.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>,
Sascha Hauer <kernel@pengutronix.de>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
Nicolas Boichat <drinkcat@chromium.org>,
"YT Shen" <yt.shen@mediatek.com>,
Daoyuan Huang <daoyuan.huang@mediatek.com>,
Jiaguang Zhang <jiaguang.zhang@mediatek.com>,
Dennis-YC Hsieh <dennis-yc.hsieh@mediatek.com>,
Houlong Wei <houlong.wei@mediatek.com>, <ginny.chen@mediatek.com>,
<kendrick.hsu@mediatek.com>,
Frederic Chen <Frederic.Chen@mediatek.com>
Subject: Re: [PATCH v5 08/12] soc: mediatek: cmdq: define the instruction struct
Date: Wed, 8 May 2019 13:40:46 +0800 [thread overview]
Message-ID: <1557294046.3936.14.camel@mtksdaap41> (raw)
In-Reply-To: <20190507081355.52630-9-bibby.hsieh@mediatek.com>
Hi, Bibby:
On Tue, 2019-05-07 at 16:13 +0800, Bibby Hsieh wrote:
> Define a instruction structure for gce driver to append command.
I would like you to describe _WHY_ do this. I think you do this for
'code readability'.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 113 +++++++++++++++--------
> include/linux/mailbox/mtk-cmdq-mailbox.h | 2 +
> include/linux/soc/mediatek/mtk-cmdq.h | 14 +--
> 3 files changed, 84 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index ff9fef5a032b..17ee8196fb3d 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -9,12 +9,24 @@
> #include <linux/mailbox_controller.h>
> #include <linux/soc/mediatek/mtk-cmdq.h>
>
> -#define CMDQ_ARG_A_WRITE_MASK 0xffff
> #define CMDQ_WRITE_ENABLE_MASK BIT(0)
> #define CMDQ_EOC_IRQ_EN BIT(0)
> #define CMDQ_EOC_CMD ((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> << 32 | CMDQ_EOC_IRQ_EN)
>
> +struct cmdq_instruction {
> + union {
> + u32 value;
> + u32 mask;
> + };
> + union {
> + u16 offset;
> + u16 event;
> + };
> + u8 subsys;
> + u8 op;
> +};
> +
> static void cmdq_client_timeout(struct timer_list *t)
> {
> struct cmdq_client *client = from_timer(client, t, timer);
> @@ -110,10 +122,8 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> }
> EXPORT_SYMBOL(cmdq_pkt_destroy);
>
> -static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> - u32 arg_a, u32 arg_b)
> +static struct cmdq_instruction *cmdq_pkt_append_command(struct cmdq_pkt *pkt)
> {
> - u64 *cmd_ptr;
>
> if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> /*
> @@ -127,81 +137,108 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
> WARN_ONCE(1, "%s: buffer size %u is too small !\n",
> __func__, (u32)pkt->buf_size);
> - return -ENOMEM;
> + return NULL;
> }
> - cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> - (*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> +
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
>
> - return 0;
> + return pkt->va_base + pkt->cmd_buf_size - CMDQ_INST_SIZE;
> }
>
> -int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
> {
> - u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
> - (subsys << CMDQ_SUBSYS_SHIFT);
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WRITE;
> + inst->value = value;
> + inst->offset = offset;
> + inst->subsys = subsys;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_write);
>
> -int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> - u32 subsys, u32 offset, u32 mask)
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
> + u32 value, u32 mask)
> {
> + struct cmdq_instruction *inst;
> u32 offset_mask = offset;
> - int err = 0;
>
> if (mask != 0xffffffff) {
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_MASK;
> + inst->mask = ~mask;
> offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> }
> - err |= cmdq_pkt_write(pkt, value, subsys, offset_mask);
>
> - return err;
> + return cmdq_pkt_write(pkt, subsys, offset_mask, value);
> }
> EXPORT_SYMBOL(cmdq_pkt_write_mask);
>
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> {
> - u32 arg_b;
> + struct cmdq_instruction *inst;
>
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - /*
> - * WFE arg_b
> - * bit 0-11: wait value
> - * bit 15: 1 - wait, 0 - no wait
> - * bit 16-27: update value
> - * bit 31: 1 - update, 0 - no update
> - */
> - arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_OPTION;
> + inst->event = event;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event, arg_b);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_wfe);
>
> -int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
> {
> + struct cmdq_instruction *inst;
> +
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event,
> - CMDQ_WFE_UPDATE);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_UPDATE;
> + inst->event = event;
> +
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_clear_event);
>
> static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> {
> - int err;
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
>
> - /* insert EOC and generate IRQ for each command iteration */
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> + inst->op = CMDQ_CODE_EOC;
> + inst->value = CMDQ_EOC_IRQ_EN;
>
> - /* JUMP to end */
> - err |= cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_JUMP;
> + inst->value = CMDQ_JUMP_PASS;
>
> - return err;
> + return 0;
> }
>
> static void cmdq_pkt_flush_async_cb(struct cmdq_cb_data data)
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 911475da7a53..f21801d32a3a 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
> #define CMDQ_WFE_UPDATE BIT(31)
> #define CMDQ_WFE_WAIT BIT(15)
> #define CMDQ_WFE_WAIT_VALUE 0x1
> +#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
Use a 'tab' to replace 8 white space.
> + CMDQ_WFE_WAIT_VALUE)
> /** cmdq event maximum */
> #define CMDQ_MAX_EVENT 0x3ff
>
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 4e8899972db4..52f69c8db8de 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -60,26 +60,26 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> /**
> * cmdq_pkt_write() - append write command to the CMDQ packet
> * @pkt: the CMDQ packet
> - * @value: the specified target register value
> * @subsys: the CMDQ sub system code
> * @offset: register offset from CMDQ sub system
> + * @value: the specified target register value
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset);
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
>
> /**
> * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> * @pkt: the CMDQ packet
> - * @value: the specified target register value
> * @subsys: the CMDQ sub system code
> * @offset: register offset from CMDQ sub system
> + * @value: the specified target register value
> * @mask: the specified target register mask
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> - u32 subsys, u32 offset, u32 mask);
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset,
> + u32 value, u32 mask);
Is the changing of parameter position about 'code readability'?
>
> /**
> * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> @@ -88,7 +88,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
Is the changing from u32 to u16 about 'code readability'?
Regards,
CK
>
> /**
> * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> @@ -97,7 +97,7 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
> *
> * Return: 0 for success; else the error code is returned
> */
> -int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event);
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
>
> /**
> * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
next prev parent reply other threads:[~2019-05-08 5:40 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 8:13 [PATCH v5 00/14] support gce on mt8183 platform Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 01/12] dt-binding: gce: remove thread-num property Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 02/12] dt-binding: gce: add gce header file for mt8183 Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 03/12] dt-binding: gce: add binding for gce subsys property Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 17:41 ` Rob Herring
2019-05-07 17:41 ` Rob Herring
2019-05-07 17:41 ` Rob Herring
2019-05-10 3:31 ` Bibby Hsieh
2019-05-10 3:31 ` Bibby Hsieh
2019-05-10 3:31 ` Bibby Hsieh
2019-05-08 3:43 ` CK Hu
2019-05-08 3:43 ` CK Hu
2019-05-08 3:43 ` CK Hu
2019-05-07 8:13 ` [PATCH v5 04/12] dt-binding: gce: add binding for gce event property Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-08 5:10 ` CK Hu
2019-05-08 5:10 ` CK Hu
2019-05-08 5:10 ` CK Hu
2019-05-10 3:27 ` Bibby Hsieh
2019-05-10 3:27 ` Bibby Hsieh
2019-05-10 3:27 ` Bibby Hsieh
2019-05-10 6:48 ` CK Hu
2019-05-10 6:48 ` CK Hu
2019-05-10 6:48 ` CK Hu
2019-05-07 8:13 ` [PATCH v5 05/12] mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 06/12] mailbox: mediatek: cmdq: support mt8183 gce function Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 07/12] soc: mediatek: cmdq: clear the event in cmdq initial flow Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 08/12] soc: mediatek: cmdq: define the instruction struct Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-08 5:40 ` CK Hu [this message]
2019-05-08 5:40 ` CK Hu
2019-05-08 5:40 ` CK Hu
[not found] ` <20190507081355.52630-1-bibby.hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-05-07 8:13 ` [PATCH v5 09/12] soc: mediatek: cmdq: add polling function Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-08 5:50 ` CK Hu
2019-05-08 5:50 ` CK Hu
2019-05-08 5:50 ` CK Hu
2019-05-07 8:13 ` [PATCH v5 10/12] soc: mediatek: cmdq: add cmdq_dev_get_subsys function Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 11/12] soc: mediatek: cmdq: add cmdq_dev_get_event function Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` [PATCH v5 12/12] arm64: dts: add gce node for mt8183 Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
2019-05-07 8:13 ` Bibby Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1557294046.3936.14.camel@mtksdaap41 \
--to=ck.hu@mediatek.com \
--cc=bibby.hsieh@mediatek.com \
--cc=daoyuan.huang@mediatek.com \
--cc=dennis-yc.hsieh@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=drinkcat@chromium.org \
--cc=ginny.chen@mediatek.com \
--cc=houlong.wei@mediatek.com \
--cc=jassisinghbrar@gmail.com \
--cc=jiaguang.zhang@mediatek.com \
--cc=kendrick.hsu@mediatek.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=srv_heupstream@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.