From: Miaoqing Pan <miaoqing@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Miaoqing Pan <miaoqing@codeaurora.org>
Subject: [PATCH 1/2] ath10k: fix array out-of-bounds access
Date: Wed, 9 Oct 2019 16:18:08 +0800 [thread overview]
Message-ID: <1570609089-22071-1-git-send-email-miaoqing@codeaurora.org> (raw)
If firmware reports rate_max > WMI_TPC_RATE_MAX(WMI_TPC_FINAL_RATE_MAX)
or num_tx_chain > WMI_TPC_TX_N_CHAIN, it will cause array out-of-bounds
access, so print a warning and reset to avoid memory corruption.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/debug.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi.c | 49 +++++++++++++++++++++------------
2 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index bd2b562..40baf25 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1516,7 +1516,7 @@ static void ath10k_tpc_stats_print(struct ath10k_tpc_stats *tpc_stats,
*len += scnprintf(buf + *len, buf_len - *len,
"No. Preamble Rate_code ");
- for (i = 0; i < WMI_TPC_TX_N_CHAIN; i++)
+ for (i = 0; i < tpc_stats->num_tx_chain; i++)
*len += scnprintf(buf + *len, buf_len - *len,
"tpc_value%d ", i);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index f0ab115..4473b13 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4681,16 +4681,13 @@ static void ath10k_tpc_config_disp_tables(struct ath10k *ar,
}
pream_idx = 0;
- for (i = 0; i < __le32_to_cpu(ev->rate_max); i++) {
+ for (i = 0; i < tpc_stats->rate_max; i++) {
memset(tpc_value, 0, sizeof(tpc_value));
memset(buff, 0, sizeof(buff));
if (i == pream_table[pream_idx])
pream_idx++;
- for (j = 0; j < WMI_TPC_TX_N_CHAIN; j++) {
- if (j >= __le32_to_cpu(ev->num_tx_chain))
- break;
-
+ for (j = 0; j < tpc_stats->num_tx_chain; j++) {
tpc[j] = ath10k_tpc_config_get_rate(ar, ev, i, j + 1,
rate_code[i],
type);
@@ -4803,7 +4800,7 @@ void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
{
- u32 num_tx_chain;
+ u32 num_tx_chain, rate_max;
u8 rate_code[WMI_TPC_RATE_MAX];
u16 pream_table[WMI_TPC_PREAM_TABLE_MAX];
struct wmi_pdev_tpc_config_event *ev;
@@ -4819,6 +4816,13 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
return;
}
+ rate_max = __le32_to_cpu(ev->rate_max);
+ if (rate_max > WMI_TPC_RATE_MAX) {
+ ath10k_warn(ar, "number of rate is %d greater than TPC configured rate %d\n",
+ rate_max, WMI_TPC_RATE_MAX);
+ rate_max = WMI_TPC_RATE_MAX;
+ }
+
tpc_stats = kzalloc(sizeof(*tpc_stats), GFP_ATOMIC);
if (!tpc_stats)
return;
@@ -4835,8 +4839,8 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
__le32_to_cpu(ev->twice_antenna_reduction);
tpc_stats->power_limit = __le32_to_cpu(ev->power_limit);
tpc_stats->twice_max_rd_power = __le32_to_cpu(ev->twice_max_rd_power);
- tpc_stats->num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
- tpc_stats->rate_max = __le32_to_cpu(ev->rate_max);
+ tpc_stats->num_tx_chain = num_tx_chain;
+ tpc_stats->rate_max = rate_max;
ath10k_tpc_config_disp_tables(ar, ev, tpc_stats,
rate_code, pream_table,
@@ -5031,16 +5035,13 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
}
pream_idx = 0;
- for (i = 0; i < __le32_to_cpu(ev->rate_max); i++) {
+ for (i = 0; i < tpc_stats->rate_max; i++) {
memset(tpc_value, 0, sizeof(tpc_value));
memset(buff, 0, sizeof(buff));
if (i == pream_table[pream_idx])
pream_idx++;
- for (j = 0; j < WMI_TPC_TX_N_CHAIN; j++) {
- if (j >= __le32_to_cpu(ev->num_tx_chain))
- break;
-
+ for (j = 0; j < tpc_stats->num_tx_chain; j++) {
tpc[j] = ath10k_wmi_tpc_final_get_rate(ar, ev, i, j + 1,
rate_code[i],
type, pream_idx);
@@ -5056,7 +5057,7 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb)
{
- u32 num_tx_chain;
+ u32 num_tx_chain, rate_max;
u8 rate_code[WMI_TPC_FINAL_RATE_MAX];
u16 pream_table[WMI_TPC_PREAM_TABLE_MAX];
struct wmi_pdev_tpc_final_table_event *ev;
@@ -5064,12 +5065,24 @@ void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb)
ev = (struct wmi_pdev_tpc_final_table_event *)skb->data;
+ num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
+ if (num_tx_chain > WMI_TPC_TX_N_CHAIN) {
+ ath10k_warn(ar, "number of tx chain is %d greater than TPC final configured tx chain %d\n",
+ num_tx_chain, WMI_TPC_TX_N_CHAIN);
+ return;
+ }
+
+ rate_max = __le32_to_cpu(ev->rate_max);
+ if (rate_max > WMI_TPC_FINAL_RATE_MAX) {
+ ath10k_warn(ar, "number of rate is %d greater than TPC final configured rate %d\n",
+ rate_max, WMI_TPC_FINAL_RATE_MAX);
+ rate_max = WMI_TPC_FINAL_RATE_MAX;
+ }
+
tpc_stats = kzalloc(sizeof(*tpc_stats), GFP_ATOMIC);
if (!tpc_stats)
return;
- num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
-
ath10k_wmi_tpc_config_get_rate_code(rate_code, pream_table,
num_tx_chain);
@@ -5082,8 +5095,8 @@ void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb)
__le32_to_cpu(ev->twice_antenna_reduction);
tpc_stats->power_limit = __le32_to_cpu(ev->power_limit);
tpc_stats->twice_max_rd_power = __le32_to_cpu(ev->twice_max_rd_power);
- tpc_stats->num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
- tpc_stats->rate_max = __le32_to_cpu(ev->rate_max);
+ tpc_stats->num_tx_chain = num_tx_chain;
+ tpc_stats->rate_max = rate_max;
ath10k_wmi_tpc_stats_final_disp_tables(ar, ev, tpc_stats,
rate_code, pream_table,
--
1.9.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Miaoqing Pan <miaoqing@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Miaoqing Pan <miaoqing@codeaurora.org>
Subject: [PATCH 1/2] ath10k: fix array out-of-bounds access
Date: Wed, 9 Oct 2019 16:18:08 +0800 [thread overview]
Message-ID: <1570609089-22071-1-git-send-email-miaoqing@codeaurora.org> (raw)
If firmware reports rate_max > WMI_TPC_RATE_MAX(WMI_TPC_FINAL_RATE_MAX)
or num_tx_chain > WMI_TPC_TX_N_CHAIN, it will cause array out-of-bounds
access, so print a warning and reset to avoid memory corruption.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/debug.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi.c | 49 +++++++++++++++++++++------------
2 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index bd2b562..40baf25 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1516,7 +1516,7 @@ static void ath10k_tpc_stats_print(struct ath10k_tpc_stats *tpc_stats,
*len += scnprintf(buf + *len, buf_len - *len,
"No. Preamble Rate_code ");
- for (i = 0; i < WMI_TPC_TX_N_CHAIN; i++)
+ for (i = 0; i < tpc_stats->num_tx_chain; i++)
*len += scnprintf(buf + *len, buf_len - *len,
"tpc_value%d ", i);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index f0ab115..4473b13 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4681,16 +4681,13 @@ static void ath10k_tpc_config_disp_tables(struct ath10k *ar,
}
pream_idx = 0;
- for (i = 0; i < __le32_to_cpu(ev->rate_max); i++) {
+ for (i = 0; i < tpc_stats->rate_max; i++) {
memset(tpc_value, 0, sizeof(tpc_value));
memset(buff, 0, sizeof(buff));
if (i == pream_table[pream_idx])
pream_idx++;
- for (j = 0; j < WMI_TPC_TX_N_CHAIN; j++) {
- if (j >= __le32_to_cpu(ev->num_tx_chain))
- break;
-
+ for (j = 0; j < tpc_stats->num_tx_chain; j++) {
tpc[j] = ath10k_tpc_config_get_rate(ar, ev, i, j + 1,
rate_code[i],
type);
@@ -4803,7 +4800,7 @@ void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
{
- u32 num_tx_chain;
+ u32 num_tx_chain, rate_max;
u8 rate_code[WMI_TPC_RATE_MAX];
u16 pream_table[WMI_TPC_PREAM_TABLE_MAX];
struct wmi_pdev_tpc_config_event *ev;
@@ -4819,6 +4816,13 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
return;
}
+ rate_max = __le32_to_cpu(ev->rate_max);
+ if (rate_max > WMI_TPC_RATE_MAX) {
+ ath10k_warn(ar, "number of rate is %d greater than TPC configured rate %d\n",
+ rate_max, WMI_TPC_RATE_MAX);
+ rate_max = WMI_TPC_RATE_MAX;
+ }
+
tpc_stats = kzalloc(sizeof(*tpc_stats), GFP_ATOMIC);
if (!tpc_stats)
return;
@@ -4835,8 +4839,8 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
__le32_to_cpu(ev->twice_antenna_reduction);
tpc_stats->power_limit = __le32_to_cpu(ev->power_limit);
tpc_stats->twice_max_rd_power = __le32_to_cpu(ev->twice_max_rd_power);
- tpc_stats->num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
- tpc_stats->rate_max = __le32_to_cpu(ev->rate_max);
+ tpc_stats->num_tx_chain = num_tx_chain;
+ tpc_stats->rate_max = rate_max;
ath10k_tpc_config_disp_tables(ar, ev, tpc_stats,
rate_code, pream_table,
@@ -5031,16 +5035,13 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
}
pream_idx = 0;
- for (i = 0; i < __le32_to_cpu(ev->rate_max); i++) {
+ for (i = 0; i < tpc_stats->rate_max; i++) {
memset(tpc_value, 0, sizeof(tpc_value));
memset(buff, 0, sizeof(buff));
if (i == pream_table[pream_idx])
pream_idx++;
- for (j = 0; j < WMI_TPC_TX_N_CHAIN; j++) {
- if (j >= __le32_to_cpu(ev->num_tx_chain))
- break;
-
+ for (j = 0; j < tpc_stats->num_tx_chain; j++) {
tpc[j] = ath10k_wmi_tpc_final_get_rate(ar, ev, i, j + 1,
rate_code[i],
type, pream_idx);
@@ -5056,7 +5057,7 @@ void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb)
void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb)
{
- u32 num_tx_chain;
+ u32 num_tx_chain, rate_max;
u8 rate_code[WMI_TPC_FINAL_RATE_MAX];
u16 pream_table[WMI_TPC_PREAM_TABLE_MAX];
struct wmi_pdev_tpc_final_table_event *ev;
@@ -5064,12 +5065,24 @@ void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb)
ev = (struct wmi_pdev_tpc_final_table_event *)skb->data;
+ num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
+ if (num_tx_chain > WMI_TPC_TX_N_CHAIN) {
+ ath10k_warn(ar, "number of tx chain is %d greater than TPC final configured tx chain %d\n",
+ num_tx_chain, WMI_TPC_TX_N_CHAIN);
+ return;
+ }
+
+ rate_max = __le32_to_cpu(ev->rate_max);
+ if (rate_max > WMI_TPC_FINAL_RATE_MAX) {
+ ath10k_warn(ar, "number of rate is %d greater than TPC final configured rate %d\n",
+ rate_max, WMI_TPC_FINAL_RATE_MAX);
+ rate_max = WMI_TPC_FINAL_RATE_MAX;
+ }
+
tpc_stats = kzalloc(sizeof(*tpc_stats), GFP_ATOMIC);
if (!tpc_stats)
return;
- num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
-
ath10k_wmi_tpc_config_get_rate_code(rate_code, pream_table,
num_tx_chain);
@@ -5082,8 +5095,8 @@ void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb)
__le32_to_cpu(ev->twice_antenna_reduction);
tpc_stats->power_limit = __le32_to_cpu(ev->power_limit);
tpc_stats->twice_max_rd_power = __le32_to_cpu(ev->twice_max_rd_power);
- tpc_stats->num_tx_chain = __le32_to_cpu(ev->num_tx_chain);
- tpc_stats->rate_max = __le32_to_cpu(ev->rate_max);
+ tpc_stats->num_tx_chain = num_tx_chain;
+ tpc_stats->rate_max = rate_max;
ath10k_wmi_tpc_stats_final_disp_tables(ar, ev, tpc_stats,
rate_code, pream_table,
--
1.9.1
next reply other threads:[~2019-10-09 8:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 8:18 Miaoqing Pan [this message]
2019-10-09 8:18 ` [PATCH 1/2] ath10k: fix array out-of-bounds access Miaoqing Pan
2019-10-09 8:18 ` [PATCH 2/2] ath10k: fix memory leak for tpc_stats_final Miaoqing Pan
2019-10-09 8:18 ` Miaoqing Pan
2019-10-14 8:38 ` [PATCH 1/2] ath10k: fix array out-of-bounds access Kalle Valo
2019-10-14 8:38 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570609089-22071-1-git-send-email-miaoqing@codeaurora.org \
--to=miaoqing@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.