All of lore.kernel.org
 help / color / mirror / Atom feed
From: <Eugen.Hristev@microchip.com>
To: <wim@linux-watchdog.org>, <linux@roeck-us.net>,
	<robh+dt@kernel.org>, <Nicolas.Ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>, <linux-watchdog@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <Eugen.Hristev@microchip.com>
Subject: [PATCH v2 2/2] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
Date: Mon, 21 Oct 2019 09:14:09 +0000	[thread overview]
Message-ID: <1571648890-15140-2-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1571648890-15140-1-git-send-email-eugen.hristev@microchip.com>

From: Eugen Hristev <eugen.hristev@microchip.com>

Add support for SAM9X60 WDT into sama5d4_wdt.
This means that this driver will have a platform data that will
hold differences.
Added definitions of different bits.
The ops functions will differentiate between the two hardware blocks.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---

Hello,

This is a rework of the separate sam9x60 watchdog driver into a single driver
that supports both hardware blocks (sam9x60 and sama5d4)
This was done as suggested on the original patches on the mailing list.

Thanks,
Eugen

 drivers/watchdog/at91sam9_wdt.h |  14 +++++
 drivers/watchdog/sama5d4_wdt.c  | 127 +++++++++++++++++++++++++++++++---------
 2 files changed, 112 insertions(+), 29 deletions(-)

diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
index 390941c..7a053fd 100644
--- a/drivers/watchdog/at91sam9_wdt.h
+++ b/drivers/watchdog/at91sam9_wdt.h
@@ -20,7 +20,10 @@
 #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
 #define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
 #define			AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define		AT91_SAM9X60_PERIODRST	BIT(4)		/* Period Reset */
+#define		AT91_SAM9X60_RPTHRST	BIT(5)		/* Minimum Restart Period */
 #define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_SAM9X60_WDDIS		BIT(12)		/* Disable */
 #define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
 #define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
 #define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
@@ -33,4 +36,15 @@
 #define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
 #define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
 
+#define AT91_SAM9X60_VR		0x08			/* Watchdog Timer Value Register */
+
+#define AT91_SAM9X60_WLR		0x0c
+#define		AT91_SAM9X60_COUNTER	(0xfff << 0)		/* Watchdog Period Value */
+#define		AT91_SAM9X60_SET_COUNTER(x)	((x) & AT91_SAM9X60_COUNTER)
+
+#define AT91_SAM9X60_IER		0x14			/* Interrupt Enable Register */
+#define		AT91_SAM9X60_PERINT		BIT(0)		/* Period Interrupt Enable */
+#define AT91_SAM9X60_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SAM9X60_ISR		0x1c			/* Interrupt Status Register */
+
 #endif
diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
index d193a60..b92afd7 100644
--- a/drivers/watchdog/sama5d4_wdt.c
+++ b/drivers/watchdog/sama5d4_wdt.c
@@ -2,7 +2,7 @@
 /*
  * Driver for Atmel SAMA5D4 Watchdog Timer
  *
- * Copyright (C) 2015 Atmel Corporation
+ * Copyright (C) 2015-2019 Microchip Technology Inc. and its subsidiaries
  */
 
 #include <linux/delay.h>
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
@@ -25,11 +26,18 @@
 
 #define WDT_SEC2TICKS(s)	((s) ? (((s) << 8) - 1) : 0)
 
+struct sama5d4_wdt_data {
+	const unsigned int		sam9x60_support;
+};
+
 struct sama5d4_wdt {
-	struct watchdog_device	wdd;
-	void __iomem		*reg_base;
-	u32			mr;
-	unsigned long		last_ping;
+	struct watchdog_device		wdd;
+	const struct sama5d4_wdt_data	*data;
+	void __iomem			*reg_base;
+	u32				mr;
+	u32				ir;
+	unsigned long			last_ping;
+	unsigned int			need_irq:1;
 };
 
 static int wdt_timeout;
@@ -78,7 +86,12 @@ static int sama5d4_wdt_start(struct watchdog_device *wdd)
 {
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 
-	wdt->mr &= ~AT91_WDT_WDDIS;
+	if (wdt->data->sam9x60_support) {
+		writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IER);
+		wdt->mr &= ~AT91_SAM9X60_WDDIS;
+	} else {
+		wdt->mr &= ~AT91_WDT_WDDIS;
+	}
 	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
 
 	return 0;
@@ -88,7 +101,12 @@ static int sama5d4_wdt_stop(struct watchdog_device *wdd)
 {
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 
-	wdt->mr |= AT91_WDT_WDDIS;
+	if (wdt->data->sam9x60_support) {
+		writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IDR);
+		wdt->mr |= AT91_SAM9X60_WDDIS;
+	} else {
+		wdt->mr |= AT91_WDT_WDDIS;
+	}
 	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
 
 	return 0;
@@ -109,6 +127,14 @@ static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd,
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 	u32 value = WDT_SEC2TICKS(timeout);
 
+	if (wdt->data->sam9x60_support) {
+		wdt_write(wdt, AT91_SAM9X60_WLR,
+			  AT91_SAM9X60_SET_COUNTER(value));
+
+		wdd->timeout = timeout;
+		return 0;
+	}
+
 	wdt->mr &= ~AT91_WDT_WDV;
 	wdt->mr |= AT91_WDT_SET_WDV(value);
 
@@ -143,8 +169,14 @@ static const struct watchdog_ops sama5d4_wdt_ops = {
 static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id)
 {
 	struct sama5d4_wdt *wdt = platform_get_drvdata(dev_id);
+	u32 reg;
 
-	if (wdt_read(wdt, AT91_WDT_SR)) {
+	if (wdt->data->sam9x60_support)
+		reg = wdt_read(wdt, AT91_SAM9X60_ISR);
+	else
+		reg = wdt_read(wdt, AT91_WDT_SR);
+
+	if (reg) {
 		pr_crit("Atmel Watchdog Software Reset\n");
 		emergency_restart();
 		pr_crit("Reboot didn't succeed\n");
@@ -157,13 +189,14 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 {
 	const char *tmp;
 
-	wdt->mr = AT91_WDT_WDDIS;
+	if (wdt->data->sam9x60_support)
+		wdt->mr = AT91_SAM9X60_WDDIS;
+	else
+		wdt->mr = AT91_WDT_WDDIS;
 
 	if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) &&
 	    !strcmp(tmp, "software"))
-		wdt->mr |= AT91_WDT_WDFIEN;
-	else
-		wdt->mr |= AT91_WDT_WDRSTEN;
+		wdt->need_irq = 1;
 
 	if (of_property_read_bool(np, "atmel,idle-halt"))
 		wdt->mr |= AT91_WDT_WDIDLEHLT;
@@ -176,21 +209,46 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 
 static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
 {
-	u32 reg;
+	u32 reg, val;
+
+	val = WDT_SEC2TICKS(WDT_DEFAULT_TIMEOUT);
 	/*
 	 * When booting and resuming, the bootloader may have changed the
 	 * watchdog configuration.
 	 * If the watchdog is already running, we can safely update it.
 	 * Else, we have to disable it properly.
 	 */
-	if (wdt_enabled) {
-		wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
-	} else {
+	if (!wdt_enabled) {
 		reg = wdt_read(wdt, AT91_WDT_MR);
-		if (!(reg & AT91_WDT_WDDIS))
+		if (wdt->data->sam9x60_support && (!(reg & AT91_SAM9X60_WDDIS)))
+			wdt_write_nosleep(wdt, AT91_WDT_MR,
+					  reg | AT91_SAM9X60_WDDIS);
+		else if (!wdt->data->sam9x60_support &&
+			 (!(reg & AT91_WDT_WDDIS)))
 			wdt_write_nosleep(wdt, AT91_WDT_MR,
 					  reg | AT91_WDT_WDDIS);
 	}
+
+	if (wdt->data->sam9x60_support) {
+		if (wdt->need_irq)
+			wdt->ir = AT91_SAM9X60_PERINT;
+		else
+			wdt->mr |= AT91_SAM9X60_PERIODRST;
+
+		wdt_write(wdt, AT91_SAM9X60_IER, wdt->ir);
+		wdt_write(wdt, AT91_SAM9X60_WLR, AT91_SAM9X60_SET_COUNTER(val));
+	} else {
+		wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
+		wdt->mr |= AT91_WDT_SET_WDV(val);
+
+		if (wdt->need_irq)
+			wdt->mr |= AT91_WDT_WDFIEN;
+		else
+			wdt->mr |= AT91_WDT_WDRSTEN;
+	}
+
+	wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
+
 	return 0;
 }
 
@@ -201,13 +259,14 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	struct sama5d4_wdt *wdt;
 	void __iomem *regs;
 	u32 irq = 0;
-	u32 timeout;
 	int ret;
 
 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 	if (!wdt)
 		return -ENOMEM;
 
+	wdt->data = of_device_get_match_data(&pdev->dev);
+
 	wdd = &wdt->wdd;
 	wdd->timeout = WDT_DEFAULT_TIMEOUT;
 	wdd->info = &sama5d4_wdt_info;
@@ -224,15 +283,17 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 
 	wdt->reg_base = regs;
 
-	irq = irq_of_parse_and_map(dev->of_node, 0);
-	if (!irq)
-		dev_warn(dev, "failed to get IRQ from DT\n");
-
 	ret = of_sama5d4_wdt_init(dev->of_node, wdt);
 	if (ret)
 		return ret;
 
-	if ((wdt->mr & AT91_WDT_WDFIEN) && irq) {
+	irq = irq_of_parse_and_map(dev->of_node, 0);
+	if (!irq) {
+		dev_warn(dev, "failed to get IRQ from DT\n");
+		wdt->need_irq = 0;
+	}
+
+	if (wdt->need_irq) {
 		ret = devm_request_irq(dev, irq, sama5d4_wdt_irq_handler,
 				       IRQF_SHARED | IRQF_IRQPOLL |
 				       IRQF_NO_SUSPEND, pdev->name, pdev);
@@ -244,11 +305,6 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 
 	watchdog_init_timeout(wdd, wdt_timeout, dev);
 
-	timeout = WDT_SEC2TICKS(wdd->timeout);
-
-	wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
-	wdt->mr |= AT91_WDT_SET_WDV(timeout);
-
 	ret = sama5d4_wdt_init(wdt);
 	if (ret)
 		return ret;
@@ -268,8 +324,21 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static struct sama5d4_wdt_data sama5d4_config;
+
+static struct sama5d4_wdt_data sam9x60_config = {
+	.sam9x60_support = 1,
+};
+
 static const struct of_device_id sama5d4_wdt_of_match[] = {
-	{ .compatible = "atmel,sama5d4-wdt", },
+	{
+		.compatible = "atmel,sama5d4-wdt",
+		.data = &sama5d4_config,
+	},
+	{
+		.compatible = "microchip,sam9x60-wdt",
+		.data = &sam9x60_config,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: <Eugen.Hristev@microchip.com>
To: <wim@linux-watchdog.org>, <linux@roeck-us.net>,
	<robh+dt@kernel.org>, <Nicolas.Ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>, <linux-watchdog@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: Eugen.Hristev@microchip.com
Subject: [PATCH v2 2/2] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
Date: Mon, 21 Oct 2019 09:14:09 +0000	[thread overview]
Message-ID: <1571648890-15140-2-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1571648890-15140-1-git-send-email-eugen.hristev@microchip.com>

From: Eugen Hristev <eugen.hristev@microchip.com>

Add support for SAM9X60 WDT into sama5d4_wdt.
This means that this driver will have a platform data that will
hold differences.
Added definitions of different bits.
The ops functions will differentiate between the two hardware blocks.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---

Hello,

This is a rework of the separate sam9x60 watchdog driver into a single driver
that supports both hardware blocks (sam9x60 and sama5d4)
This was done as suggested on the original patches on the mailing list.

Thanks,
Eugen

 drivers/watchdog/at91sam9_wdt.h |  14 +++++
 drivers/watchdog/sama5d4_wdt.c  | 127 +++++++++++++++++++++++++++++++---------
 2 files changed, 112 insertions(+), 29 deletions(-)

diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
index 390941c..7a053fd 100644
--- a/drivers/watchdog/at91sam9_wdt.h
+++ b/drivers/watchdog/at91sam9_wdt.h
@@ -20,7 +20,10 @@
 #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
 #define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
 #define			AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define		AT91_SAM9X60_PERIODRST	BIT(4)		/* Period Reset */
+#define		AT91_SAM9X60_RPTHRST	BIT(5)		/* Minimum Restart Period */
 #define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_SAM9X60_WDDIS		BIT(12)		/* Disable */
 #define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
 #define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
 #define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
@@ -33,4 +36,15 @@
 #define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
 #define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
 
+#define AT91_SAM9X60_VR		0x08			/* Watchdog Timer Value Register */
+
+#define AT91_SAM9X60_WLR		0x0c
+#define		AT91_SAM9X60_COUNTER	(0xfff << 0)		/* Watchdog Period Value */
+#define		AT91_SAM9X60_SET_COUNTER(x)	((x) & AT91_SAM9X60_COUNTER)
+
+#define AT91_SAM9X60_IER		0x14			/* Interrupt Enable Register */
+#define		AT91_SAM9X60_PERINT		BIT(0)		/* Period Interrupt Enable */
+#define AT91_SAM9X60_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SAM9X60_ISR		0x1c			/* Interrupt Status Register */
+
 #endif
diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
index d193a60..b92afd7 100644
--- a/drivers/watchdog/sama5d4_wdt.c
+++ b/drivers/watchdog/sama5d4_wdt.c
@@ -2,7 +2,7 @@
 /*
  * Driver for Atmel SAMA5D4 Watchdog Timer
  *
- * Copyright (C) 2015 Atmel Corporation
+ * Copyright (C) 2015-2019 Microchip Technology Inc. and its subsidiaries
  */
 
 #include <linux/delay.h>
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
@@ -25,11 +26,18 @@
 
 #define WDT_SEC2TICKS(s)	((s) ? (((s) << 8) - 1) : 0)
 
+struct sama5d4_wdt_data {
+	const unsigned int		sam9x60_support;
+};
+
 struct sama5d4_wdt {
-	struct watchdog_device	wdd;
-	void __iomem		*reg_base;
-	u32			mr;
-	unsigned long		last_ping;
+	struct watchdog_device		wdd;
+	const struct sama5d4_wdt_data	*data;
+	void __iomem			*reg_base;
+	u32				mr;
+	u32				ir;
+	unsigned long			last_ping;
+	unsigned int			need_irq:1;
 };
 
 static int wdt_timeout;
@@ -78,7 +86,12 @@ static int sama5d4_wdt_start(struct watchdog_device *wdd)
 {
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 
-	wdt->mr &= ~AT91_WDT_WDDIS;
+	if (wdt->data->sam9x60_support) {
+		writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IER);
+		wdt->mr &= ~AT91_SAM9X60_WDDIS;
+	} else {
+		wdt->mr &= ~AT91_WDT_WDDIS;
+	}
 	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
 
 	return 0;
@@ -88,7 +101,12 @@ static int sama5d4_wdt_stop(struct watchdog_device *wdd)
 {
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 
-	wdt->mr |= AT91_WDT_WDDIS;
+	if (wdt->data->sam9x60_support) {
+		writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IDR);
+		wdt->mr |= AT91_SAM9X60_WDDIS;
+	} else {
+		wdt->mr |= AT91_WDT_WDDIS;
+	}
 	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
 
 	return 0;
@@ -109,6 +127,14 @@ static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd,
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 	u32 value = WDT_SEC2TICKS(timeout);
 
+	if (wdt->data->sam9x60_support) {
+		wdt_write(wdt, AT91_SAM9X60_WLR,
+			  AT91_SAM9X60_SET_COUNTER(value));
+
+		wdd->timeout = timeout;
+		return 0;
+	}
+
 	wdt->mr &= ~AT91_WDT_WDV;
 	wdt->mr |= AT91_WDT_SET_WDV(value);
 
@@ -143,8 +169,14 @@ static const struct watchdog_ops sama5d4_wdt_ops = {
 static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id)
 {
 	struct sama5d4_wdt *wdt = platform_get_drvdata(dev_id);
+	u32 reg;
 
-	if (wdt_read(wdt, AT91_WDT_SR)) {
+	if (wdt->data->sam9x60_support)
+		reg = wdt_read(wdt, AT91_SAM9X60_ISR);
+	else
+		reg = wdt_read(wdt, AT91_WDT_SR);
+
+	if (reg) {
 		pr_crit("Atmel Watchdog Software Reset\n");
 		emergency_restart();
 		pr_crit("Reboot didn't succeed\n");
@@ -157,13 +189,14 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 {
 	const char *tmp;
 
-	wdt->mr = AT91_WDT_WDDIS;
+	if (wdt->data->sam9x60_support)
+		wdt->mr = AT91_SAM9X60_WDDIS;
+	else
+		wdt->mr = AT91_WDT_WDDIS;
 
 	if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) &&
 	    !strcmp(tmp, "software"))
-		wdt->mr |= AT91_WDT_WDFIEN;
-	else
-		wdt->mr |= AT91_WDT_WDRSTEN;
+		wdt->need_irq = 1;
 
 	if (of_property_read_bool(np, "atmel,idle-halt"))
 		wdt->mr |= AT91_WDT_WDIDLEHLT;
@@ -176,21 +209,46 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 
 static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
 {
-	u32 reg;
+	u32 reg, val;
+
+	val = WDT_SEC2TICKS(WDT_DEFAULT_TIMEOUT);
 	/*
 	 * When booting and resuming, the bootloader may have changed the
 	 * watchdog configuration.
 	 * If the watchdog is already running, we can safely update it.
 	 * Else, we have to disable it properly.
 	 */
-	if (wdt_enabled) {
-		wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
-	} else {
+	if (!wdt_enabled) {
 		reg = wdt_read(wdt, AT91_WDT_MR);
-		if (!(reg & AT91_WDT_WDDIS))
+		if (wdt->data->sam9x60_support && (!(reg & AT91_SAM9X60_WDDIS)))
+			wdt_write_nosleep(wdt, AT91_WDT_MR,
+					  reg | AT91_SAM9X60_WDDIS);
+		else if (!wdt->data->sam9x60_support &&
+			 (!(reg & AT91_WDT_WDDIS)))
 			wdt_write_nosleep(wdt, AT91_WDT_MR,
 					  reg | AT91_WDT_WDDIS);
 	}
+
+	if (wdt->data->sam9x60_support) {
+		if (wdt->need_irq)
+			wdt->ir = AT91_SAM9X60_PERINT;
+		else
+			wdt->mr |= AT91_SAM9X60_PERIODRST;
+
+		wdt_write(wdt, AT91_SAM9X60_IER, wdt->ir);
+		wdt_write(wdt, AT91_SAM9X60_WLR, AT91_SAM9X60_SET_COUNTER(val));
+	} else {
+		wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
+		wdt->mr |= AT91_WDT_SET_WDV(val);
+
+		if (wdt->need_irq)
+			wdt->mr |= AT91_WDT_WDFIEN;
+		else
+			wdt->mr |= AT91_WDT_WDRSTEN;
+	}
+
+	wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
+
 	return 0;
 }
 
@@ -201,13 +259,14 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	struct sama5d4_wdt *wdt;
 	void __iomem *regs;
 	u32 irq = 0;
-	u32 timeout;
 	int ret;
 
 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 	if (!wdt)
 		return -ENOMEM;
 
+	wdt->data = of_device_get_match_data(&pdev->dev);
+
 	wdd = &wdt->wdd;
 	wdd->timeout = WDT_DEFAULT_TIMEOUT;
 	wdd->info = &sama5d4_wdt_info;
@@ -224,15 +283,17 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 
 	wdt->reg_base = regs;
 
-	irq = irq_of_parse_and_map(dev->of_node, 0);
-	if (!irq)
-		dev_warn(dev, "failed to get IRQ from DT\n");
-
 	ret = of_sama5d4_wdt_init(dev->of_node, wdt);
 	if (ret)
 		return ret;
 
-	if ((wdt->mr & AT91_WDT_WDFIEN) && irq) {
+	irq = irq_of_parse_and_map(dev->of_node, 0);
+	if (!irq) {
+		dev_warn(dev, "failed to get IRQ from DT\n");
+		wdt->need_irq = 0;
+	}
+
+	if (wdt->need_irq) {
 		ret = devm_request_irq(dev, irq, sama5d4_wdt_irq_handler,
 				       IRQF_SHARED | IRQF_IRQPOLL |
 				       IRQF_NO_SUSPEND, pdev->name, pdev);
@@ -244,11 +305,6 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 
 	watchdog_init_timeout(wdd, wdt_timeout, dev);
 
-	timeout = WDT_SEC2TICKS(wdd->timeout);
-
-	wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
-	wdt->mr |= AT91_WDT_SET_WDV(timeout);
-
 	ret = sama5d4_wdt_init(wdt);
 	if (ret)
 		return ret;
@@ -268,8 +324,21 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static struct sama5d4_wdt_data sama5d4_config;
+
+static struct sama5d4_wdt_data sam9x60_config = {
+	.sam9x60_support = 1,
+};
+
 static const struct of_device_id sama5d4_wdt_of_match[] = {
-	{ .compatible = "atmel,sama5d4-wdt", },
+	{
+		.compatible = "atmel,sama5d4-wdt",
+		.data = &sama5d4_config,
+	},
+	{
+		.compatible = "microchip,sam9x60-wdt",
+		.data = &sam9x60_config,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-10-21  9:14 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-21  9:14 [PATCH v2 1/2] dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible Eugen.Hristev
2019-10-21  9:14 ` Eugen.Hristev
2019-10-21  9:14 ` Eugen.Hristev [this message]
2019-10-21  9:14   ` [PATCH v2 2/2] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog Eugen.Hristev
2019-10-29 13:28   ` Guenter Roeck
2019-10-29 13:28     ` Guenter Roeck
2019-11-07 12:51     ` Eugen.Hristev
2019-11-07 12:51       ` Eugen.Hristev
2019-11-07 16:41       ` Guenter Roeck
2019-11-07 16:41         ` Guenter Roeck
2019-11-07 17:10         ` Eugen.Hristev
2019-11-07 17:10           ` Eugen.Hristev
2019-10-25 21:33 ` [PATCH v2 1/2] dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible Rob Herring
2019-10-25 21:33   ` Rob Herring
2019-10-29 13:16 ` Guenter Roeck
2019-10-29 13:16   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1571648890-15140-2-git-send-email-eugen.hristev@microchip.com \
    --to=eugen.hristev@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.