All of lore.kernel.org
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe@baylibre.com>
To: mark.rutland@arm.com, maxime.ripard@bootlin.com,
	robh+dt@kernel.org, wens@csie.org, jernej.skrabec@siol.net
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v2 2/2] ARM64: dts: allwinner: add pineh64 model A
Date: Tue, 29 Oct 2019 19:17:43 +0000	[thread overview]
Message-ID: <1572376663-22023-3-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1572376663-22023-1-git-send-email-clabbe@baylibre.com>

This patch adds the model A of the PineH64.
The model A has the same size of the pine64 and has a PCIE slot.

The only devicetree difference with the pineH64 model B, is the PHY
regulator.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 .../devicetree/bindings/arm/sunxi.yaml        |  5 ++++
 arch/arm64/boot/dts/allwinner/Makefile        |  1 +
 .../allwinner/sun50i-h6-pine-h64-modelA.dts   | 26 +++++++++++++++++++
 3 files changed, 32 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 9a1e4992b9e9..0059925a3395 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -594,6 +594,11 @@ properties:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PineH64 model A
+        items:
+          - const: pine64,pine-h64-modelA
+          - const: allwinner,sun50i-h6
+
       - description: Pine64 PineH64 model B
         items:
           - const: pine64,pine-h64-modelB
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index d2418021768b..6bda5d9961c8 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts
new file mode 100644
index 000000000000..fef47687c85e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+	model = "Pine H64 model A";
+	compatible = "pine64,pine-h64-modelA", "allwinner,sun50i-h6";
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+};
+
+&emac {
+	phy-supply = <&reg_gmac_3v3>;
+};
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe@baylibre.com>
To: mark.rutland@arm.com, maxime.ripard@bootlin.com,
	robh+dt@kernel.org, wens@csie.org, jernej.skrabec@siol.net
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v2 2/2] ARM64: dts: allwinner: add pineh64 model A
Date: Tue, 29 Oct 2019 19:17:43 +0000	[thread overview]
Message-ID: <1572376663-22023-3-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1572376663-22023-1-git-send-email-clabbe@baylibre.com>

This patch adds the model A of the PineH64.
The model A has the same size of the pine64 and has a PCIE slot.

The only devicetree difference with the pineH64 model B, is the PHY
regulator.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 .../devicetree/bindings/arm/sunxi.yaml        |  5 ++++
 arch/arm64/boot/dts/allwinner/Makefile        |  1 +
 .../allwinner/sun50i-h6-pine-h64-modelA.dts   | 26 +++++++++++++++++++
 3 files changed, 32 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 9a1e4992b9e9..0059925a3395 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -594,6 +594,11 @@ properties:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PineH64 model A
+        items:
+          - const: pine64,pine-h64-modelA
+          - const: allwinner,sun50i-h6
+
       - description: Pine64 PineH64 model B
         items:
           - const: pine64,pine-h64-modelB
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index d2418021768b..6bda5d9961c8 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts
new file mode 100644
index 000000000000..fef47687c85e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+	model = "Pine H64 model A";
+	compatible = "pine64,pine-h64-modelA", "allwinner,sun50i-h6";
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+};
+
+&emac {
+	phy-supply = <&reg_gmac_3v3>;
+};
-- 
2.21.0


  parent reply	other threads:[~2019-10-29 19:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-29 19:17 [PATCH v2 0/2] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board Corentin Labbe
2019-10-29 19:17 ` Corentin Labbe
2019-10-29 19:17 ` [PATCH v2 1/2] ARM64: dts: sun50i-h6-pine-h64: state that the DT supports the modelB Corentin Labbe
2019-10-29 19:17   ` Corentin Labbe
2019-10-29 19:17 ` Corentin Labbe [this message]
2019-10-29 19:17   ` [PATCH v2 2/2] ARM64: dts: allwinner: add pineh64 model A Corentin Labbe
2019-10-29 19:27   ` Jernej Škrabec
2019-10-29 19:27     ` Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1572376663-22023-3-git-send-email-clabbe@baylibre.com \
    --to=clabbe@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@siol.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.