From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/5] pinctrl: pfc: r8a7790: add mux data for IIC(B) cores
Date: Wed, 26 Mar 2014 14:02:30 +0000 [thread overview]
Message-ID: <1573801.ZCY1H3qPEP@avalon> (raw)
In-Reply-To: <1395773789-17249-3-git-send-email-wsa@the-dreams.de>
Hi Wolfram,
Thank you for the patch.
On Tuesday 25 March 2014 19:56:26 Wolfram Sang wrote:
> From: Wolfram Sang <wsa@sang-engineering.com>
>
> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Change since V1:
>
> * renamed i2c4-7 to iic0-3
>
> drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 118
> ++++++++++++++++++++++++++++++++++- 1 file changed, 116 insertions(+), 2
> deletions(-)
>
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index bcb47d138b02..99b62b1ee752
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> @@ -782,8 +782,8 @@ enum {
> USB1_PWEN_MARK, AUDIO_CLKOUT_D_MARK, USB1_OVC_MARK,
> TCLK1_B_MARK,
>
> - I2C0_SCL_MARK, I2C0_SDA_MARK,
> - I2C3_SCL_MARK, I2C3_SDA_MARK,
> + IIC0_SCL_MARK, IIC0_SDA_MARK, I2C0_SCL_MARK, I2C0_SDA_MARK,
> + IIC3_SCL_MARK, IIC3_SDA_MARK, I2C3_SCL_MARK, I2C3_SDA_MARK,
> PINMUX_MARK_END,
> };
>
> @@ -1723,9 +1723,13 @@ static const u16 pinmux_data[] = {
> PINMUX_IPSR_DATA(IP16_7, USB1_OVC),
> PINMUX_IPSR_MODSEL_DATA(IP16_7, TCLK1_B, SEL_TMU1_1),
>
> + PINMUX_DATA(IIC0_SCL_MARK, FN_SEL_IIC0_0),
> + PINMUX_DATA(IIC0_SDA_MARK, FN_SEL_IIC0_0),
> PINMUX_DATA(I2C0_SCL_MARK, FN_SEL_IIC0_1),
> PINMUX_DATA(I2C0_SDA_MARK, FN_SEL_IIC0_1),
>
> + PINMUX_DATA(IIC3_SCL_MARK, FN_SEL_IICDVFS_0),
> + PINMUX_DATA(IIC3_SDA_MARK, FN_SEL_IICDVFS_0),
> PINMUX_DATA(I2C3_SCL_MARK, FN_SEL_IICDVFS_1),
> PINMUX_DATA(I2C3_SDA_MARK, FN_SEL_IICDVFS_1),
> };
> @@ -2134,6 +2138,80 @@ static const unsigned int i2c3_pins[] = {
> static const unsigned int i2c3_mux[] = {
> I2C3_SCL_MARK, I2C3_SDA_MARK,
> };
> +/* - IIC0 (I2C4)
> ------------------------------------------------------------ */ +static
> const unsigned int iic0_pins[] = {
> + /* SCL, SDA */
> + PIN_A_NUMBER('G', 15), PIN_A_NUMBER('F', 15),
> +};
> +static const unsigned int iic0_mux[] = {
> + IIC0_SCL_MARK, IIC0_SDA_MARK,
> +};
> +/* - IIC1 (I2C5)
> ------------------------------------------------------------ */ +static
> const unsigned int iic1_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(1, 16), RCAR_GP_PIN(1, 17),
> +};
> +static const unsigned int iic1_mux[] = {
> + IIC1_SCL_MARK, IIC1_SDA_MARK,
> +};
> +static const unsigned int iic1_b_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(3, 6), RCAR_GP_PIN(3, 7),
> +};
> +static const unsigned int iic1_b_mux[] = {
> + IIC1_SCL_B_MARK, IIC1_SDA_B_MARK,
> +};
> +static const unsigned int iic1_c_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(4, 30), RCAR_GP_PIN(4, 27),
> +};
> +static const unsigned int iic1_c_mux[] = {
> + IIC1_SCL_C_MARK, IIC1_SDA_C_MARK,
> +};
> +/* - IIC2 (I2C6)
> ------------------------------------------------------------ */ +static
> const unsigned int iic2_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(5, 5), RCAR_GP_PIN(5, 6),
> +};
> +static const unsigned int iic2_mux[] = {
> + IIC2_SCL_MARK, IIC2_SDA_MARK,
> +};
> +static const unsigned int iic2_b_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(4, 0), RCAR_GP_PIN(4, 1),
> +};
> +static const unsigned int iic2_b_mux[] = {
> + IIC2_SCL_B_MARK, IIC2_SDA_B_MARK,
> +};
> +static const unsigned int iic2_c_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(0, 6), RCAR_GP_PIN(0, 7),
> +};
> +static const unsigned int iic2_c_mux[] = {
> + IIC2_SCL_C_MARK, IIC2_SDA_C_MARK,
> +};
> +static const unsigned int iic2_d_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(3, 14), RCAR_GP_PIN(3, 15),
> +};
> +static const unsigned int iic2_d_mux[] = {
> + IIC2_SCL_D_MARK, IIC2_SDA_D_MARK,
> +};
> +static const unsigned int iic2_e_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(2, 18), RCAR_GP_PIN(2, 19),
> +};
> +static const unsigned int iic2_e_mux[] = {
> + IIC2_SCL_E_MARK, IIC2_SDA_E_MARK,
> +};
> +/* - IIC3 (I2C7)
> ------------------------------------------------------------ */ +static
> const unsigned int iic3_pins[] = {
> +/* SCL, SDA */
> + PIN_A_NUMBER('J', 15), PIN_A_NUMBER('H', 15),
> +};
> +static const unsigned int iic3_mux[] = {
> + IIC3_SCL_MARK, IIC3_SDA_MARK,
> +};
> /* - INTC
> ------------------------------------------------------------------- */
> static const unsigned int intc_irq0_pins[] = {
> /* IRQ */
> @@ -3650,6 +3728,16 @@ static const struct sh_pfc_pin_group pinmux_groups[]
> = { SH_PFC_PIN_GROUP(i2c2_d),
> SH_PFC_PIN_GROUP(i2c2_e),
> SH_PFC_PIN_GROUP(i2c3),
> + SH_PFC_PIN_GROUP(iic0),
> + SH_PFC_PIN_GROUP(iic1),
> + SH_PFC_PIN_GROUP(iic1_b),
> + SH_PFC_PIN_GROUP(iic1_c),
> + SH_PFC_PIN_GROUP(iic2),
> + SH_PFC_PIN_GROUP(iic2_b),
> + SH_PFC_PIN_GROUP(iic2_c),
> + SH_PFC_PIN_GROUP(iic2_d),
> + SH_PFC_PIN_GROUP(iic2_e),
> + SH_PFC_PIN_GROUP(iic3),
> SH_PFC_PIN_GROUP(intc_irq0),
> SH_PFC_PIN_GROUP(intc_irq1),
> SH_PFC_PIN_GROUP(intc_irq2),
> @@ -3932,6 +4020,28 @@ static const char * const i2c3_groups[] = {
> "i2c3",
> };
>
> +static const char * const iic0_groups[] = {
> + "iic0",
> +};
> +
> +static const char * const iic1_groups[] = {
> + "iic1",
> + "iic1_b",
> + "iic1_c",
> +};
> +
> +static const char * const iic2_groups[] = {
> + "iic2",
> + "iic2_b",
> + "iic2_c",
> + "iic2_d",
> + "iic2_e",
> +};
> +
> +static const char * const iic3_groups[] = {
> + "iic3",
> +};
> +
> static const char * const intc_groups[] = {
> "intc_irq0",
> "intc_irq1",
> @@ -4226,6 +4336,10 @@ static const struct sh_pfc_function
> pinmux_functions[] = { SH_PFC_FUNCTION(i2c1),
> SH_PFC_FUNCTION(i2c2),
> SH_PFC_FUNCTION(i2c3),
> + SH_PFC_FUNCTION(iic0),
> + SH_PFC_FUNCTION(iic1),
> + SH_PFC_FUNCTION(iic2),
> + SH_PFC_FUNCTION(iic3),
> SH_PFC_FUNCTION(intc),
> SH_PFC_FUNCTION(mmc0),
> SH_PFC_FUNCTION(mmc1),
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/5] pinctrl: pfc: r8a7790: add mux data for IIC(B) cores
Date: Wed, 26 Mar 2014 15:02:30 +0100 [thread overview]
Message-ID: <1573801.ZCY1H3qPEP@avalon> (raw)
In-Reply-To: <1395773789-17249-3-git-send-email-wsa@the-dreams.de>
Hi Wolfram,
Thank you for the patch.
On Tuesday 25 March 2014 19:56:26 Wolfram Sang wrote:
> From: Wolfram Sang <wsa@sang-engineering.com>
>
> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Change since V1:
>
> * renamed i2c4-7 to iic0-3
>
> drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 118
> ++++++++++++++++++++++++++++++++++- 1 file changed, 116 insertions(+), 2
> deletions(-)
>
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index bcb47d138b02..99b62b1ee752
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> @@ -782,8 +782,8 @@ enum {
> USB1_PWEN_MARK, AUDIO_CLKOUT_D_MARK, USB1_OVC_MARK,
> TCLK1_B_MARK,
>
> - I2C0_SCL_MARK, I2C0_SDA_MARK,
> - I2C3_SCL_MARK, I2C3_SDA_MARK,
> + IIC0_SCL_MARK, IIC0_SDA_MARK, I2C0_SCL_MARK, I2C0_SDA_MARK,
> + IIC3_SCL_MARK, IIC3_SDA_MARK, I2C3_SCL_MARK, I2C3_SDA_MARK,
> PINMUX_MARK_END,
> };
>
> @@ -1723,9 +1723,13 @@ static const u16 pinmux_data[] = {
> PINMUX_IPSR_DATA(IP16_7, USB1_OVC),
> PINMUX_IPSR_MODSEL_DATA(IP16_7, TCLK1_B, SEL_TMU1_1),
>
> + PINMUX_DATA(IIC0_SCL_MARK, FN_SEL_IIC0_0),
> + PINMUX_DATA(IIC0_SDA_MARK, FN_SEL_IIC0_0),
> PINMUX_DATA(I2C0_SCL_MARK, FN_SEL_IIC0_1),
> PINMUX_DATA(I2C0_SDA_MARK, FN_SEL_IIC0_1),
>
> + PINMUX_DATA(IIC3_SCL_MARK, FN_SEL_IICDVFS_0),
> + PINMUX_DATA(IIC3_SDA_MARK, FN_SEL_IICDVFS_0),
> PINMUX_DATA(I2C3_SCL_MARK, FN_SEL_IICDVFS_1),
> PINMUX_DATA(I2C3_SDA_MARK, FN_SEL_IICDVFS_1),
> };
> @@ -2134,6 +2138,80 @@ static const unsigned int i2c3_pins[] = {
> static const unsigned int i2c3_mux[] = {
> I2C3_SCL_MARK, I2C3_SDA_MARK,
> };
> +/* - IIC0 (I2C4)
> ------------------------------------------------------------ */ +static
> const unsigned int iic0_pins[] = {
> + /* SCL, SDA */
> + PIN_A_NUMBER('G', 15), PIN_A_NUMBER('F', 15),
> +};
> +static const unsigned int iic0_mux[] = {
> + IIC0_SCL_MARK, IIC0_SDA_MARK,
> +};
> +/* - IIC1 (I2C5)
> ------------------------------------------------------------ */ +static
> const unsigned int iic1_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(1, 16), RCAR_GP_PIN(1, 17),
> +};
> +static const unsigned int iic1_mux[] = {
> + IIC1_SCL_MARK, IIC1_SDA_MARK,
> +};
> +static const unsigned int iic1_b_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(3, 6), RCAR_GP_PIN(3, 7),
> +};
> +static const unsigned int iic1_b_mux[] = {
> + IIC1_SCL_B_MARK, IIC1_SDA_B_MARK,
> +};
> +static const unsigned int iic1_c_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(4, 30), RCAR_GP_PIN(4, 27),
> +};
> +static const unsigned int iic1_c_mux[] = {
> + IIC1_SCL_C_MARK, IIC1_SDA_C_MARK,
> +};
> +/* - IIC2 (I2C6)
> ------------------------------------------------------------ */ +static
> const unsigned int iic2_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(5, 5), RCAR_GP_PIN(5, 6),
> +};
> +static const unsigned int iic2_mux[] = {
> + IIC2_SCL_MARK, IIC2_SDA_MARK,
> +};
> +static const unsigned int iic2_b_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(4, 0), RCAR_GP_PIN(4, 1),
> +};
> +static const unsigned int iic2_b_mux[] = {
> + IIC2_SCL_B_MARK, IIC2_SDA_B_MARK,
> +};
> +static const unsigned int iic2_c_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(0, 6), RCAR_GP_PIN(0, 7),
> +};
> +static const unsigned int iic2_c_mux[] = {
> + IIC2_SCL_C_MARK, IIC2_SDA_C_MARK,
> +};
> +static const unsigned int iic2_d_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(3, 14), RCAR_GP_PIN(3, 15),
> +};
> +static const unsigned int iic2_d_mux[] = {
> + IIC2_SCL_D_MARK, IIC2_SDA_D_MARK,
> +};
> +static const unsigned int iic2_e_pins[] = {
> + /* SCL, SDA */
> + RCAR_GP_PIN(2, 18), RCAR_GP_PIN(2, 19),
> +};
> +static const unsigned int iic2_e_mux[] = {
> + IIC2_SCL_E_MARK, IIC2_SDA_E_MARK,
> +};
> +/* - IIC3 (I2C7)
> ------------------------------------------------------------ */ +static
> const unsigned int iic3_pins[] = {
> +/* SCL, SDA */
> + PIN_A_NUMBER('J', 15), PIN_A_NUMBER('H', 15),
> +};
> +static const unsigned int iic3_mux[] = {
> + IIC3_SCL_MARK, IIC3_SDA_MARK,
> +};
> /* - INTC
> ------------------------------------------------------------------- */
> static const unsigned int intc_irq0_pins[] = {
> /* IRQ */
> @@ -3650,6 +3728,16 @@ static const struct sh_pfc_pin_group pinmux_groups[]
> = { SH_PFC_PIN_GROUP(i2c2_d),
> SH_PFC_PIN_GROUP(i2c2_e),
> SH_PFC_PIN_GROUP(i2c3),
> + SH_PFC_PIN_GROUP(iic0),
> + SH_PFC_PIN_GROUP(iic1),
> + SH_PFC_PIN_GROUP(iic1_b),
> + SH_PFC_PIN_GROUP(iic1_c),
> + SH_PFC_PIN_GROUP(iic2),
> + SH_PFC_PIN_GROUP(iic2_b),
> + SH_PFC_PIN_GROUP(iic2_c),
> + SH_PFC_PIN_GROUP(iic2_d),
> + SH_PFC_PIN_GROUP(iic2_e),
> + SH_PFC_PIN_GROUP(iic3),
> SH_PFC_PIN_GROUP(intc_irq0),
> SH_PFC_PIN_GROUP(intc_irq1),
> SH_PFC_PIN_GROUP(intc_irq2),
> @@ -3932,6 +4020,28 @@ static const char * const i2c3_groups[] = {
> "i2c3",
> };
>
> +static const char * const iic0_groups[] = {
> + "iic0",
> +};
> +
> +static const char * const iic1_groups[] = {
> + "iic1",
> + "iic1_b",
> + "iic1_c",
> +};
> +
> +static const char * const iic2_groups[] = {
> + "iic2",
> + "iic2_b",
> + "iic2_c",
> + "iic2_d",
> + "iic2_e",
> +};
> +
> +static const char * const iic3_groups[] = {
> + "iic3",
> +};
> +
> static const char * const intc_groups[] = {
> "intc_irq0",
> "intc_irq1",
> @@ -4226,6 +4336,10 @@ static const struct sh_pfc_function
> pinmux_functions[] = { SH_PFC_FUNCTION(i2c1),
> SH_PFC_FUNCTION(i2c2),
> SH_PFC_FUNCTION(i2c3),
> + SH_PFC_FUNCTION(iic0),
> + SH_PFC_FUNCTION(iic1),
> + SH_PFC_FUNCTION(iic2),
> + SH_PFC_FUNCTION(iic3),
> SH_PFC_FUNCTION(intc),
> SH_PFC_FUNCTION(mmc0),
> SH_PFC_FUNCTION(mmc1),
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-03-26 14:02 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-25 18:56 [PATCH v2 0/5] ARM: shmobile: r8a7790: enable IIC(B) cores Wolfram Sang
2014-03-25 18:56 ` Wolfram Sang
2014-03-25 18:56 ` [PATCH v2 1/5] pinctrl: pfc: r8a7790: add i2c0 muxing Wolfram Sang
2014-03-25 18:56 ` Wolfram Sang
2014-03-26 13:58 ` Laurent Pinchart
2014-03-26 14:00 ` Laurent Pinchart
2014-04-14 7:13 ` Wolfram Sang
2014-04-14 7:13 ` Wolfram Sang
2014-04-22 13:39 ` Linus Walleij
2014-04-22 13:39 ` Linus Walleij
2014-03-25 18:56 ` [PATCH v2 2/5] pinctrl: pfc: r8a7790: add mux data for IIC(B) cores Wolfram Sang
2014-03-25 18:56 ` Wolfram Sang
2014-03-26 14:02 ` Laurent Pinchart [this message]
2014-03-26 14:02 ` Laurent Pinchart
2014-04-14 7:14 ` Wolfram Sang
2014-04-14 7:14 ` Wolfram Sang
2014-04-22 13:40 ` Linus Walleij
2014-04-22 13:40 ` Linus Walleij
2014-03-25 18:56 ` [PATCH v2 3/5] ARM: shmobile: r8a7790: add IIC0-2 clock macros Wolfram Sang
2014-03-25 18:56 ` Wolfram Sang
2014-04-10 8:58 ` Simon Horman
2014-04-10 8:58 ` Simon Horman
2014-03-25 18:56 ` [PATCH v2 4/5] ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi Wolfram Sang
2014-03-25 18:56 ` Wolfram Sang
2014-03-26 14:04 ` Laurent Pinchart
2014-03-26 14:04 ` Laurent Pinchart
2014-04-10 8:57 ` Simon Horman
2014-04-10 8:57 ` Simon Horman
2014-04-10 9:03 ` Wolfram Sang
2014-04-10 9:03 ` Wolfram Sang
2014-04-10 9:06 ` Laurent Pinchart
2014-04-10 9:06 ` Laurent Pinchart
2014-03-25 18:56 ` [PATCH v2 5/5] ARM: shmobile: r8a7790: add IIC(B) cores " Wolfram Sang
2014-03-25 18:56 ` Wolfram Sang
2014-03-26 14:05 ` Laurent Pinchart
2014-03-26 14:05 ` Laurent Pinchart
2014-04-10 8:36 ` Simon Horman
2014-04-10 8:36 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573801.ZCY1H3qPEP@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.