[PATCH 0/2] um: switch to NO_BOOTMEM

[PATCH 0/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Hi,

These patches convert UML to use NO_BOOTMEM.
Tested on x86-64.

Mike Rapoport (2):
  um: setup_physmem: stop using global variables
  um: switch to NO_BOOTMEM

 arch/um/Kconfig.common   |  2 ++
 arch/um/kernel/physmem.c | 22 ++++++++++------------
 2 files changed, 12 insertions(+), 12 deletions(-)

-- 
2.7.4


_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um

[PATCH 0/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Hi,

These patches convert UML to use NO_BOOTMEM.
Tested on x86-64.

Mike Rapoport (2):
  um: setup_physmem: stop using global variables
  um: switch to NO_BOOTMEM

 arch/um/Kconfig.common   |  2 ++
 arch/um/kernel/physmem.c | 22 ++++++++++------------
 2 files changed, 12 insertions(+), 12 deletions(-)

-- 
2.7.4

[PATCH 1/2] um: setup_physmem: stop using global variables

[Mike Rapoport]

The setup_physmem() function receives uml_physmem and uml_reserved as
parameters and still used these global variables. Replace such usage with
local variables.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
---
 arch/um/kernel/physmem.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index f02596e..0eaec0e 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -86,7 +86,7 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 	long map_size;
 	int err;
 
-	offset = uml_reserved - uml_physmem;
+	offset = reserve_end - start;
 	map_size = len - offset;
 	if(map_size <= 0) {
 		os_warn("Too few physical memory! Needed=%lu, given=%lu\n",
@@ -96,12 +96,12 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 
 	physmem_fd = create_mem_file(len + highmem);
 
-	err = os_map_memory((void *) uml_reserved, physmem_fd, offset,
+	err = os_map_memory((void *) reserve_end, physmem_fd, offset,
 			    map_size, 1, 1, 1);
 	if (err < 0) {
 		os_warn("setup_physmem - mapping %ld bytes of memory at 0x%p "
 			"failed - errno = %d\n", map_size,
-			(void *) uml_reserved, err);
+			(void *) reserve_end, err);
 		exit(1);
 	}
 
-- 
2.7.4


_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um

[PATCH 1/2] um: setup_physmem: stop using global variables

[Mike Rapoport]

The setup_physmem() function receives uml_physmem and uml_reserved as
parameters and still used these global variables. Replace such usage with
local variables.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
---
 arch/um/kernel/physmem.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index f02596e..0eaec0e 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -86,7 +86,7 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 	long map_size;
 	int err;
 
-	offset = uml_reserved - uml_physmem;
+	offset = reserve_end - start;
 	map_size = len - offset;
 	if(map_size <= 0) {
 		os_warn("Too few physical memory! Needed=%lu, given=%lu\n",
@@ -96,12 +96,12 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 
 	physmem_fd = create_mem_file(len + highmem);
 
-	err = os_map_memory((void *) uml_reserved, physmem_fd, offset,
+	err = os_map_memory((void *) reserve_end, physmem_fd, offset,
 			    map_size, 1, 1, 1);
 	if (err < 0) {
 		os_warn("setup_physmem - mapping %ld bytes of memory at 0x%p "
 			"failed - errno = %d\n", map_size,
-			(void *) uml_reserved, err);
+			(void *) reserve_end, err);
 		exit(1);
 	}
 
-- 
2.7.4

[PATCH 2/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Replace bootmem initialization with memblock_add and memblock_reserve calls
and explicit initialization of {min,max}_low_pfn.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
---
 arch/um/Kconfig.common   |  2 ++
 arch/um/kernel/physmem.c | 20 +++++++++-----------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 07f84c8..1487957 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -8,6 +8,8 @@ config UML
 	select HAVE_UID16
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_MEMBLOCK
+	select NO_BOOTMEM
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 0eaec0e..296a91a 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -5,6 +5,7 @@
 
 #include <linux/module.h>
 #include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <asm/page.h>
@@ -80,23 +81,18 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 			  unsigned long len, unsigned long long highmem)
 {
 	unsigned long reserve = reserve_end - start;
-	unsigned long pfn = PFN_UP(__pa(reserve_end));
-	unsigned long delta = (len - reserve) >> PAGE_SHIFT;
-	unsigned long offset, bootmap_size;
-	long map_size;
+	long map_size = len - reserve;
 	int err;
 
-	offset = reserve_end - start;
-	map_size = len - offset;
 	if(map_size <= 0) {
 		os_warn("Too few physical memory! Needed=%lu, given=%lu\n",
-			offset, len);
+			reserve, len);
 		exit(1);
 	}
 
 	physmem_fd = create_mem_file(len + highmem);
 
-	err = os_map_memory((void *) reserve_end, physmem_fd, offset,
+	err = os_map_memory((void *) reserve_end, physmem_fd, reserve,
 			    map_size, 1, 1, 1);
 	if (err < 0) {
 		os_warn("setup_physmem - mapping %ld bytes of memory at 0x%p "
@@ -113,9 +109,11 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 	os_write_file(physmem_fd, __syscall_stub_start, PAGE_SIZE);
 	os_fsync_file(physmem_fd);
 
-	bootmap_size = init_bootmem(pfn, pfn + delta);
-	free_bootmem(__pa(reserve_end) + bootmap_size,
-		     len - bootmap_size - reserve);
+	memblock_add(__pa(start), len + highmem);
+	memblock_reserve(__pa(start), reserve);
+
+	min_low_pfn = PFN_UP(__pa(reserve_end));
+	max_low_pfn = min_low_pfn + (map_size >> PAGE_SHIFT);
 }
 
 int phys_mapping(unsigned long phys, unsigned long long *offset_out)
-- 
2.7.4


_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um

[PATCH 2/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Replace bootmem initialization with memblock_add and memblock_reserve calls
and explicit initialization of {min,max}_low_pfn.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
---
 arch/um/Kconfig.common   |  2 ++
 arch/um/kernel/physmem.c | 20 +++++++++-----------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 07f84c8..1487957 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -8,6 +8,8 @@ config UML
 	select HAVE_UID16
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_MEMBLOCK
+	select NO_BOOTMEM
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 0eaec0e..296a91a 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -5,6 +5,7 @@
 
 #include <linux/module.h>
 #include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <asm/page.h>
@@ -80,23 +81,18 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 			  unsigned long len, unsigned long long highmem)
 {
 	unsigned long reserve = reserve_end - start;
-	unsigned long pfn = PFN_UP(__pa(reserve_end));
-	unsigned long delta = (len - reserve) >> PAGE_SHIFT;
-	unsigned long offset, bootmap_size;
-	long map_size;
+	long map_size = len - reserve;
 	int err;
 
-	offset = reserve_end - start;
-	map_size = len - offset;
 	if(map_size <= 0) {
 		os_warn("Too few physical memory! Needed=%lu, given=%lu\n",
-			offset, len);
+			reserve, len);
 		exit(1);
 	}
 
 	physmem_fd = create_mem_file(len + highmem);
 
-	err = os_map_memory((void *) reserve_end, physmem_fd, offset,
+	err = os_map_memory((void *) reserve_end, physmem_fd, reserve,
 			    map_size, 1, 1, 1);
 	if (err < 0) {
 		os_warn("setup_physmem - mapping %ld bytes of memory at 0x%p "
@@ -113,9 +109,11 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end,
 	os_write_file(physmem_fd, __syscall_stub_start, PAGE_SIZE);
 	os_fsync_file(physmem_fd);
 
-	bootmap_size = init_bootmem(pfn, pfn + delta);
-	free_bootmem(__pa(reserve_end) + bootmap_size,
-		     len - bootmap_size - reserve);
+	memblock_add(__pa(start), len + highmem);
+	memblock_reserve(__pa(start), reserve);
+
+	min_low_pfn = PFN_UP(__pa(reserve_end));
+	max_low_pfn = min_low_pfn + (map_size >> PAGE_SHIFT);
 }
 
 int phys_mapping(unsigned long phys, unsigned long long *offset_out)
-- 
2.7.4

Re: [PATCH 0/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Any comments on this?

On Tue, Jul 24, 2018 at 04:23:12PM +0300, Mike Rapoport wrote:
> Hi,
> 
> These patches convert UML to use NO_BOOTMEM.
> Tested on x86-64.
> 
> Mike Rapoport (2):
>   um: setup_physmem: stop using global variables
>   um: switch to NO_BOOTMEM
> 
>  arch/um/Kconfig.common   |  2 ++
>  arch/um/kernel/physmem.c | 22 ++++++++++------------
>  2 files changed, 12 insertions(+), 12 deletions(-)
> 
> -- 
> 2.7.4
> 

-- 
Sincerely yours,
Mike.


_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um

Re: [PATCH 0/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Any comments on this?

On Tue, Jul 24, 2018 at 04:23:12PM +0300, Mike Rapoport wrote:
> Hi,
> 
> These patches convert UML to use NO_BOOTMEM.
> Tested on x86-64.
> 
> Mike Rapoport (2):
>   um: setup_physmem: stop using global variables
>   um: switch to NO_BOOTMEM
> 
>  arch/um/Kconfig.common   |  2 ++
>  arch/um/kernel/physmem.c | 22 ++++++++++------------
>  2 files changed, 12 insertions(+), 12 deletions(-)
> 
> -- 
> 2.7.4
> 

-- 
Sincerely yours,
Mike.

Re: [PATCH 0/2] um: switch to NO_BOOTMEM

[Richard Weinberger]

Am Dienstag, 31. Juli 2018, 15:38:27 CEST schrieb Mike Rapoport:
> Any comments on this?
> 
> On Tue, Jul 24, 2018 at 04:23:12PM +0300, Mike Rapoport wrote:
> > Hi,
> > 
> > These patches convert UML to use NO_BOOTMEM.
> > Tested on x86-64.
> > 
> > Mike Rapoport (2):
> >   um: setup_physmem: stop using global variables
> >   um: switch to NO_BOOTMEM
> > 
> >  arch/um/Kconfig.common   |  2 ++
> >  arch/um/kernel/physmem.c | 22 ++++++++++------------
> >  2 files changed, 12 insertions(+), 12 deletions(-)

Acked-by: Richard Weinberger <richard@nod.at>

Thanks,
//richard


_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um

Re: [PATCH 0/2] um: switch to NO_BOOTMEM

[Richard Weinberger]

Am Dienstag, 31. Juli 2018, 15:38:27 CEST schrieb Mike Rapoport:
> Any comments on this?
> 
> On Tue, Jul 24, 2018 at 04:23:12PM +0300, Mike Rapoport wrote:
> > Hi,
> > 
> > These patches convert UML to use NO_BOOTMEM.
> > Tested on x86-64.
> > 
> > Mike Rapoport (2):
> >   um: setup_physmem: stop using global variables
> >   um: switch to NO_BOOTMEM
> > 
> >  arch/um/Kconfig.common   |  2 ++
> >  arch/um/kernel/physmem.c | 22 ++++++++++------------
> >  2 files changed, 12 insertions(+), 12 deletions(-)

Acked-by: Richard Weinberger <richard@nod.at>

Thanks,
//richard

Re: [PATCH 0/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Hi Richard,

On Tue, Jul 31, 2018 at 09:03:35PM +0200, Richard Weinberger wrote:
> Am Dienstag, 31. Juli 2018, 15:38:27 CEST schrieb Mike Rapoport:
> > Any comments on this?
> > 
> > On Tue, Jul 24, 2018 at 04:23:12PM +0300, Mike Rapoport wrote:
> > > Hi,
> > > 
> > > These patches convert UML to use NO_BOOTMEM.
> > > Tested on x86-64.
> > > 
> > > Mike Rapoport (2):
> > >   um: setup_physmem: stop using global variables
> > >   um: switch to NO_BOOTMEM
> > > 
> > >  arch/um/Kconfig.common   |  2 ++
> > >  arch/um/kernel/physmem.c | 22 ++++++++++------------
> > >  2 files changed, 12 insertions(+), 12 deletions(-)
> 
> Acked-by: Richard Weinberger <richard@nod.at>

Thanks!

Can you please merge this through the uml tree?
 
> Thanks,
> //richard
> 

-- 
Sincerely yours,
Mike.


_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um

Re: [PATCH 0/2] um: switch to NO_BOOTMEM

[Mike Rapoport]

Hi Richard,

On Tue, Jul 31, 2018 at 09:03:35PM +0200, Richard Weinberger wrote:
> Am Dienstag, 31. Juli 2018, 15:38:27 CEST schrieb Mike Rapoport:
> > Any comments on this?
> > 
> > On Tue, Jul 24, 2018 at 04:23:12PM +0300, Mike Rapoport wrote:
> > > Hi,
> > > 
> > > These patches convert UML to use NO_BOOTMEM.
> > > Tested on x86-64.
> > > 
> > > Mike Rapoport (2):
> > >   um: setup_physmem: stop using global variables
> > >   um: switch to NO_BOOTMEM
> > > 
> > >  arch/um/Kconfig.common   |  2 ++
> > >  arch/um/kernel/physmem.c | 22 ++++++++++------------
> > >  2 files changed, 12 insertions(+), 12 deletions(-)
> 
> Acked-by: Richard Weinberger <richard@nod.at>

Thanks!

Can you please merge this through the uml tree?
 
> Thanks,
> //richard
> 

-- 
Sincerely yours,
Mike.