All of lore.kernel.org
 help / color / mirror / Atom feed
From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-nvme@lists.infradead.org, linux-hwmon@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-wireless@vger.kernel.org,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	akpm@linux-foundation.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
	Sujith Thomas <sujith.thomas@intel.com>,
	Darren Hart <dvhart@infradead.org>,
	Andy Shevchenko <andy@infradead.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amit.kucheria@verdurent.com>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Keith Busch <kbusch@kernel.org>, Jens Axboe <axboe@fb.com>,
	Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>
Subject: [PATCH v4 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
Date: Sun, 15 Dec 2019 14:16:05 +0900	[thread overview]
Message-ID: <1576386975-7941-3-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1576386975-7941-1-git-send-email-akinobu.mita@gmail.com>

This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin(),
deci_kelvin_to_celsius(), and deci_kelvin_to_millicelsius_with_offset() in
<linux/units.h> instead of helpers in <linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/units.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v4
- change include order
- keep the line over 80 characters because this change doesn't make it longer

 drivers/acpi/thermal.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index d831a61..19067a5 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -27,6 +27,7 @@
 #include <linux/acpi.h>
 #include <linux/workqueue.h>
 #include <linux/uaccess.h>
+#include <linux/units.h>
 
 #define PREFIX "ACPI: "
 
@@ -172,7 +173,7 @@ struct acpi_thermal {
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
 	int tz_enabled;
-	int kelvin_offset;
+	int kelvin_offset;	/* in millidegrees */
 	struct work_struct thermal_check_work;
 };
 
@@ -297,7 +298,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 			if (crt == -1) {
 				tz->trips.critical.flags.valid = 0;
 			} else if (crt > 0) {
-				unsigned long crt_k = CELSIUS_TO_DECI_KELVIN(crt);
+				unsigned long crt_k = celsius_to_deci_kelvin(crt);
+
 				/*
 				 * Allow override critical threshold
 				 */
@@ -333,7 +335,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		if (psv == -1) {
 			status = AE_SUPPORT;
 		} else if (psv > 0) {
-			tmp = CELSIUS_TO_DECI_KELVIN(psv);
+			tmp = celsius_to_deci_kelvin(psv);
 			status = AE_OK;
 		} else {
 			status = acpi_evaluate_integer(tz->device->handle,
@@ -413,7 +415,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					break;
 				if (i == 1)
 					tz->trips.active[0].temperature =
-						CELSIUS_TO_DECI_KELVIN(act);
+						celsius_to_deci_kelvin(act);
 				else
 					/*
 					 * Don't allow override higher than
@@ -421,9 +423,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					 */
 					tz->trips.active[i - 1].temperature =
 						(tz->trips.active[i - 2].temperature <
-						CELSIUS_TO_DECI_KELVIN(act) ?
+						celsius_to_deci_kelvin(act) ?
 						tz->trips.active[i - 2].temperature :
-						CELSIUS_TO_DECI_KELVIN(act));
+						celsius_to_deci_kelvin(act));
 				break;
 			} else {
 				tz->trips.active[i].temperature = tmp;
@@ -519,7 +521,7 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
 	if (result)
 		return result;
 
-	*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(tz->temperature,
+	*temp = deci_kelvin_to_millicelsius_with_offset(tz->temperature,
 							tz->kelvin_offset);
 	return 0;
 }
@@ -624,7 +626,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips.critical.flags.valid) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.critical.temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -634,7 +636,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips.hot.flags.valid) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.hot.temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -644,7 +646,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips.passive.flags.valid) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.passive.temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -655,7 +657,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
 		tz->trips.active[i].flags.valid; i++) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.active[i].temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -672,7 +674,7 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
 	struct acpi_thermal *tz = thermal->devdata;
 
 	if (tz->trips.critical.flags.valid) {
-		*temperature = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+		*temperature = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.critical.temperature,
 				tz->kelvin_offset);
 		return 0;
@@ -692,7 +694,7 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
 
 	if (type == THERMAL_TRIP_ACTIVE) {
 		int trip_temp;
-		int temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+		int temp = deci_kelvin_to_millicelsius_with_offset(
 					tz->temperature, tz->kelvin_offset);
 		if (thermal_get_trip_temp(thermal, trip, &trip_temp))
 			return -EINVAL;
@@ -1043,9 +1045,9 @@ static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
 {
 	if (tz->trips.critical.flags.valid &&
 	    (tz->trips.critical.temperature % 5) == 1)
-		tz->kelvin_offset = 2731;
+		tz->kelvin_offset = 273100;
 	else
-		tz->kelvin_offset = 2732;
+		tz->kelvin_offset = 273200;
 }
 
 static void acpi_thermal_check_fn(struct work_struct *work)
@@ -1087,7 +1089,7 @@ static int acpi_thermal_add(struct acpi_device *device)
 	INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
 
 	pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
-		acpi_device_bid(device), DECI_KELVIN_TO_CELSIUS(tz->temperature));
+		acpi_device_bid(device), deci_kelvin_to_celsius(tz->temperature));
 	goto end;
 
 free_memory:
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-nvme@lists.infradead.org, linux-hwmon@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-wireless@vger.kernel.org,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	akpm@linux-foundation.org
Cc: Amit Kucheria <amit.kucheria@verdurent.com>,
	Jean Delvare <jdelvare@suse.com>,
	Sagi Grimberg <sagi@grimberg.me>,
	Sujith Thomas <sujith.thomas@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Akinobu Mita <akinobu.mita@gmail.com>, Jens Axboe <axboe@fb.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Keith Busch <kbusch@kernel.org>,
	Darren Hart <dvhart@infradead.org>,
	Zhang Rui <rui.zhang@intel.com>, Christoph Hellwig <hch@lst.de>,
	Andy Shevchenko <andy@infradead.org>
Subject: [PATCH v4 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
Date: Sun, 15 Dec 2019 14:16:05 +0900	[thread overview]
Message-ID: <1576386975-7941-3-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1576386975-7941-1-git-send-email-akinobu.mita@gmail.com>

This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin(),
deci_kelvin_to_celsius(), and deci_kelvin_to_millicelsius_with_offset() in
<linux/units.h> instead of helpers in <linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/units.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v4
- change include order
- keep the line over 80 characters because this change doesn't make it longer

 drivers/acpi/thermal.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index d831a61..19067a5 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -27,6 +27,7 @@
 #include <linux/acpi.h>
 #include <linux/workqueue.h>
 #include <linux/uaccess.h>
+#include <linux/units.h>
 
 #define PREFIX "ACPI: "
 
@@ -172,7 +173,7 @@ struct acpi_thermal {
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
 	int tz_enabled;
-	int kelvin_offset;
+	int kelvin_offset;	/* in millidegrees */
 	struct work_struct thermal_check_work;
 };
 
@@ -297,7 +298,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 			if (crt == -1) {
 				tz->trips.critical.flags.valid = 0;
 			} else if (crt > 0) {
-				unsigned long crt_k = CELSIUS_TO_DECI_KELVIN(crt);
+				unsigned long crt_k = celsius_to_deci_kelvin(crt);
+
 				/*
 				 * Allow override critical threshold
 				 */
@@ -333,7 +335,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		if (psv == -1) {
 			status = AE_SUPPORT;
 		} else if (psv > 0) {
-			tmp = CELSIUS_TO_DECI_KELVIN(psv);
+			tmp = celsius_to_deci_kelvin(psv);
 			status = AE_OK;
 		} else {
 			status = acpi_evaluate_integer(tz->device->handle,
@@ -413,7 +415,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					break;
 				if (i == 1)
 					tz->trips.active[0].temperature =
-						CELSIUS_TO_DECI_KELVIN(act);
+						celsius_to_deci_kelvin(act);
 				else
 					/*
 					 * Don't allow override higher than
@@ -421,9 +423,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					 */
 					tz->trips.active[i - 1].temperature =
 						(tz->trips.active[i - 2].temperature <
-						CELSIUS_TO_DECI_KELVIN(act) ?
+						celsius_to_deci_kelvin(act) ?
 						tz->trips.active[i - 2].temperature :
-						CELSIUS_TO_DECI_KELVIN(act));
+						celsius_to_deci_kelvin(act));
 				break;
 			} else {
 				tz->trips.active[i].temperature = tmp;
@@ -519,7 +521,7 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
 	if (result)
 		return result;
 
-	*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(tz->temperature,
+	*temp = deci_kelvin_to_millicelsius_with_offset(tz->temperature,
 							tz->kelvin_offset);
 	return 0;
 }
@@ -624,7 +626,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips.critical.flags.valid) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.critical.temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -634,7 +636,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips.hot.flags.valid) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.hot.temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -644,7 +646,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips.passive.flags.valid) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.passive.temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -655,7 +657,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
 		tz->trips.active[i].flags.valid; i++) {
 		if (!trip) {
-			*temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+			*temp = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.active[i].temperature,
 				tz->kelvin_offset);
 			return 0;
@@ -672,7 +674,7 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
 	struct acpi_thermal *tz = thermal->devdata;
 
 	if (tz->trips.critical.flags.valid) {
-		*temperature = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+		*temperature = deci_kelvin_to_millicelsius_with_offset(
 				tz->trips.critical.temperature,
 				tz->kelvin_offset);
 		return 0;
@@ -692,7 +694,7 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
 
 	if (type == THERMAL_TRIP_ACTIVE) {
 		int trip_temp;
-		int temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+		int temp = deci_kelvin_to_millicelsius_with_offset(
 					tz->temperature, tz->kelvin_offset);
 		if (thermal_get_trip_temp(thermal, trip, &trip_temp))
 			return -EINVAL;
@@ -1043,9 +1045,9 @@ static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
 {
 	if (tz->trips.critical.flags.valid &&
 	    (tz->trips.critical.temperature % 5) == 1)
-		tz->kelvin_offset = 2731;
+		tz->kelvin_offset = 273100;
 	else
-		tz->kelvin_offset = 2732;
+		tz->kelvin_offset = 273200;
 }
 
 static void acpi_thermal_check_fn(struct work_struct *work)
@@ -1087,7 +1089,7 @@ static int acpi_thermal_add(struct acpi_device *device)
 	INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
 
 	pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
-		acpi_device_bid(device), DECI_KELVIN_TO_CELSIUS(tz->temperature));
+		acpi_device_bid(device), deci_kelvin_to_celsius(tz->temperature));
 	goto end;
 
 free_memory:
-- 
2.7.4


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

  parent reply	other threads:[~2019-12-15  5:16 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-15  5:16 [PATCH v4 00/12] add header file for kelvin to/from Celsius conversion helpers Akinobu Mita
2019-12-15  5:16 ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 01/12] add helpers for kelvin to/from Celsius conversion Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` Akinobu Mita [this message]
2019-12-15  5:16   ` [PATCH v4 02/12] ACPI: thermal: switch to use <linux/units.h> helpers Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 03/12] platform/x86: asus-wmi: " Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 04/12] platform/x86: intel_menlow: " Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 05/12] thermal: int340x: " Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 06/12] thermal: intel_pch: " Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 07/12] nvme: hwmon: " Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 08/12] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h> Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 09/12] iwlegacy: use <linux/units.h> helpers Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 10/12] iwlwifi: " Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 11/12] thermal: armada: remove unused TO_MCELSIUS macro Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15  5:16 ` [PATCH v4 12/12] iio: adc: qcom-vadc-common: use <linux/units.h> helpers Akinobu Mita
2019-12-15  5:16   ` Akinobu Mita
2019-12-15 12:29   ` Jonathan Cameron
2019-12-15 12:29     ` Jonathan Cameron
2019-12-23 13:07 ` [PATCH v4 00/12] add header file for kelvin to/from Celsius conversion helpers Akinobu Mita
2019-12-23 13:07   ` Akinobu Mita

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1576386975-7941-3-git-send-email-akinobu.mita@gmail.com \
    --to=akinobu.mita@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=amit.kucheria@verdurent.com \
    --cc=andy@infradead.org \
    --cc=axboe@fb.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=dvhart@infradead.org \
    --cc=hch@lst.de \
    --cc=jdelvare@suse.com \
    --cc=kbusch@kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=rui.zhang@intel.com \
    --cc=sagi@grimberg.me \
    --cc=sujith.thomas@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.