From: Sricharan R <sricharan@codeaurora.org>
To: sricharan@codeaurora.org, agross@kernel.org,
devicetree@vger.kernel.org, linus.walleij@linaro.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-soc@vger.kernel.org, robh+dt@kernel.org, sboyd@kernel.org,
sivaprak@codeaurora.org
Subject: [PATCH V2 0/7] Add minimal boot support for IPQ6018
Date: Thu, 19 Dec 2019 16:11:42 +0530 [thread overview]
Message-ID: <1576752109-24497-1-git-send-email-sricharan@codeaurora.org> (raw)
The IPQ6018 is Qualcomm’s 802.11ax SoC for Routers,
Gateways and Access Points.
This series adds minimal board boot support for ipq6018-cp01 board.
[v2]
* Splitted dt bindings and driver into different patches. Added missing bindings
and some style changes.
* Added ipq6018 schema
* Addressed review comments for gcc clock bindings.
* Removed all clk critical flags, removed 1/1 factor clocks, moved to new
way of specifying clk parents, and addressed other review comments.
* Sorted nodes based on address, name, label. Removed unused clock nodes,
Addressed other review comments.
Sricharan R (7):
dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
pinctrl: qcom: Add ipq6018 pinctrl driver
dt-bindings: qcom: Add ipq6018 bindings
clk: qcom: Add DT bindings for ipq6018 gcc clock controller
clk: qcom: Add ipq6018 Global Clock Controller support
arm64: dts: Add ipq6018 SoC and CP01 board support
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
Documentation/devicetree/bindings/arm/qcom.yaml | 7 +
.../devicetree/bindings/clock/qcom,gcc.yaml | 3 +-
.../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 172 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 41 +
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 215 +
arch/arm64/configs/defconfig | 3 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq6018.c | 4674 ++++++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1161 +++++
include/dt-bindings/clock/qcom,gcc-ipq6018.h | 262 ++
include/dt-bindings/reset/qcom,gcc-ipq6018.h | 157 +
15 files changed, 6715 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq6018.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq6018.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq6018.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: Sricharan R <sricharan@codeaurora.org>
To: sricharan@codeaurora.org, agross@kernel.org,
devicetree@vger.kernel.org, linus.walleij@linaro.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-soc@vger.kernel.org, robh+dt@kernel.org, sboyd@kernel.org,
sivaprak@codeaurora.org
Subject: [PATCH V2 0/7] Add minimal boot support for IPQ6018
Date: Thu, 19 Dec 2019 16:11:42 +0530 [thread overview]
Message-ID: <1576752109-24497-1-git-send-email-sricharan@codeaurora.org> (raw)
The IPQ6018 is Qualcomm’s 802.11ax SoC for Routers,
Gateways and Access Points.
This series adds minimal board boot support for ipq6018-cp01 board.
[v2]
* Splitted dt bindings and driver into different patches. Added missing bindings
and some style changes.
* Added ipq6018 schema
* Addressed review comments for gcc clock bindings.
* Removed all clk critical flags, removed 1/1 factor clocks, moved to new
way of specifying clk parents, and addressed other review comments.
* Sorted nodes based on address, name, label. Removed unused clock nodes,
Addressed other review comments.
Sricharan R (7):
dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
pinctrl: qcom: Add ipq6018 pinctrl driver
dt-bindings: qcom: Add ipq6018 bindings
clk: qcom: Add DT bindings for ipq6018 gcc clock controller
clk: qcom: Add ipq6018 Global Clock Controller support
arm64: dts: Add ipq6018 SoC and CP01 board support
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
Documentation/devicetree/bindings/arm/qcom.yaml | 7 +
.../devicetree/bindings/clock/qcom,gcc.yaml | 3 +-
.../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 172 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 41 +
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 215 +
arch/arm64/configs/defconfig | 3 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq6018.c | 4674 ++++++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1161 +++++
include/dt-bindings/clock/qcom,gcc-ipq6018.h | 262 ++
include/dt-bindings/reset/qcom,gcc-ipq6018.h | 157 +
15 files changed, 6715 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq6018.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq6018.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq6018.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-12-19 10:42 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-19 10:41 Sricharan R [this message]
2019-12-19 10:41 ` [PATCH V2 0/7] Add minimal boot support for IPQ6018 Sricharan R
2019-12-19 10:41 ` [PATCH V2 1/7] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings Sricharan R
2019-12-19 10:41 ` Sricharan R
2019-12-29 3:41 ` Bjorn Andersson
2019-12-29 3:41 ` Bjorn Andersson
2019-12-30 9:12 ` Sricharan R
2019-12-30 9:12 ` Sricharan R
2019-12-19 10:41 ` [PATCH V2 2/7] pinctrl: qcom: Add ipq6018 pinctrl driver Sricharan R
2019-12-19 10:41 ` Sricharan R
2019-12-29 3:35 ` Bjorn Andersson
2019-12-29 3:35 ` Bjorn Andersson
2019-12-30 9:10 ` Sricharan R
2019-12-30 9:10 ` Sricharan R
2019-12-19 10:41 ` [PATCH V2 3/7] dt-bindings: qcom: Add ipq6018 bindings Sricharan R
2019-12-19 10:41 ` Sricharan R
2019-12-19 10:41 ` [PATCH V2 4/7] clk: qcom: Add DT bindings for ipq6018 gcc clock controller Sricharan R
2019-12-19 10:41 ` Sricharan R
2019-12-19 18:24 ` Rob Herring
2019-12-19 18:24 ` Rob Herring
2019-12-19 10:41 ` [PATCH V2 5/7] clk: qcom: Add ipq6018 Global Clock Controller support Sricharan R
2019-12-27 1:33 ` Stephen Boyd
2019-12-27 1:33 ` Stephen Boyd
2019-12-30 9:06 ` Sricharan R
2019-12-30 9:06 ` Sricharan R
2019-12-19 10:41 ` [PATCH V2 6/7] arm64: dts: Add ipq6018 SoC and CP01 board support Sricharan R
2019-12-19 10:41 ` Sricharan R
2019-12-29 3:29 ` Bjorn Andersson
2019-12-29 3:29 ` Bjorn Andersson
2019-12-30 9:10 ` Sricharan R
2019-12-30 9:10 ` Sricharan R
2019-12-19 10:41 ` [PATCH V2 7/7] arm64: defconfig: Enable qcom ipq6018 clock and pinctrl Sricharan R
2019-12-19 10:41 ` Sricharan R
2019-12-27 1:33 ` [PATCH V2 0/7] Add minimal boot support for IPQ6018 Stephen Boyd
2019-12-27 1:33 ` Stephen Boyd
2019-12-30 9:07 ` Sricharan R
2019-12-30 9:07 ` Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576752109-24497-1-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sivaprak@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.