From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v4 10/12] ARM: dts: aspeed: ast2600: Add XDMA Engine
Date: Thu, 2 Jan 2020 13:27:54 -0600 [thread overview]
Message-ID: <1577993276-2184-11-git-send-email-eajames@linux.ibm.com> (raw)
In-Reply-To: <1577993276-2184-1-git-send-email-eajames@linux.ibm.com>
Add a node for the XDMA engine with all the necessary information.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v3:
- Switch to "aspeed,scu" property
arch/arm/boot/dts/aspeed-g6.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index ead336e93a12..3416e8305d1c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/ast2600-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
/ {
model = "Aspeed BMC";
@@ -311,6 +312,18 @@ rng: hwrng at 1e6e2524 {
quality = <100>;
};
+ xdma: xdma at 1e6e7000 {
+ compatible = "aspeed,ast2600-xdma";
+ reg = <0x1e6e7000 0x100>;
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ resets = <&syscon ASPEED_RESET_DEV_XDMA>;
+ interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+ pcie-device = "bmc";
+ aspeed,scu = <&syscon>;
+ status = "disabled";
+ };
+
gpio0: gpio at 1e780000 {
#gpio-cells = <2>;
gpio-controller;
--
2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
mark.rutland@arm.com, jason@lakedaemon.net, maz@kernel.org,
robh+dt@kernel.org, tglx@linutronix.de, joel@jms.id.au,
andrew@aj.id.au, eajames@linux.ibm.com
Subject: [PATCH v4 10/12] ARM: dts: aspeed: ast2600: Add XDMA Engine
Date: Thu, 2 Jan 2020 13:27:54 -0600 [thread overview]
Message-ID: <1577993276-2184-11-git-send-email-eajames@linux.ibm.com> (raw)
In-Reply-To: <1577993276-2184-1-git-send-email-eajames@linux.ibm.com>
Add a node for the XDMA engine with all the necessary information.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v3:
- Switch to "aspeed,scu" property
arch/arm/boot/dts/aspeed-g6.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index ead336e93a12..3416e8305d1c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/ast2600-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
/ {
model = "Aspeed BMC";
@@ -311,6 +312,18 @@ rng: hwrng@1e6e2524 {
quality = <100>;
};
+ xdma: xdma@1e6e7000 {
+ compatible = "aspeed,ast2600-xdma";
+ reg = <0x1e6e7000 0x100>;
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ resets = <&syscon ASPEED_RESET_DEV_XDMA>;
+ interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+ pcie-device = "bmc";
+ aspeed,scu = <&syscon>;
+ status = "disabled";
+ };
+
gpio0: gpio@1e780000 {
#gpio-cells = <2>;
gpio-controller;
--
2.24.0
next prev parent reply other threads:[~2020-01-02 19:27 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-02 19:27 [PATCH v4 00/12] aspeed: Add SCU interrupt controller and XDMA engine drivers Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-02 19:27 ` [PATCH v4 01/12] dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-02 19:27 ` [PATCH v4 02/12] irqchip: " Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-02 19:27 ` [PATCH v4 03/12] ARM: dts: aspeed: ast2500: Add " Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-02 19:27 ` [PATCH v4 04/12] ARM: dts: aspeed: ast2600: Add SCU interrupt controllers Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-02 19:27 ` [PATCH v4 05/12] dt-bindings: soc: Add Aspeed XDMA Engine Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-09 4:45 ` Andrew Jeffery
2020-01-09 4:45 ` Andrew Jeffery
2020-01-02 19:27 ` [PATCH v4 06/12] soc: aspeed: Add XDMA Engine Driver Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-09 5:08 ` Andrew Jeffery
2020-01-09 5:08 ` Andrew Jeffery
2020-01-02 19:27 ` [PATCH v4 07/12] soc: aspeed: xdma: Add user interface Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-09 5:53 ` Andrew Jeffery
2020-01-09 5:53 ` Andrew Jeffery
2020-01-02 19:27 ` [PATCH v4 08/12] soc: aspeed: xdma: Add reset ioctl Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-09 5:59 ` Andrew Jeffery
2020-01-09 5:59 ` Andrew Jeffery
2020-01-02 19:27 ` [PATCH v4 09/12] ARM: dts: aspeed: ast2500: Add XDMA Engine Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-09 6:02 ` Andrew Jeffery
2020-01-09 6:02 ` Andrew Jeffery
2020-01-02 19:27 ` Eddie James [this message]
2020-01-02 19:27 ` [PATCH v4 10/12] ARM: dts: aspeed: ast2600: " Eddie James
2020-01-09 6:02 ` Andrew Jeffery
2020-01-09 6:02 ` Andrew Jeffery
2020-01-02 19:27 ` [PATCH v4 11/12] ARM: dts: aspeed: witherspoon: Enable " Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-09 6:04 ` Andrew Jeffery
2020-01-09 6:04 ` Andrew Jeffery
2020-01-02 19:27 ` [PATCH v4 12/12] ARM: dts: aspeed: tacoma: Enable XDMA engine Eddie James
2020-01-02 19:27 ` Eddie James
2020-01-09 6:04 ` Andrew Jeffery
2020-01-09 6:04 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1577993276-2184-11-git-send-email-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.