All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sricharan R <sricharan@codeaurora.org>
To: sricharan@codeaurora.org, agross@kernel.org,
	devicetree@vger.kernel.org, linus.walleij@linaro.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-soc@vger.kernel.org, robh+dt@kernel.org, sboyd@kernel.org,
	sivaprak@codeaurora.org
Subject: [PATCH V3 0/5] Add minimal boot support for IPQ6018
Date: Fri,  3 Jan 2020 17:19:32 +0530	[thread overview]
Message-ID: <1578052177-6778-1-git-send-email-sricharan@codeaurora.org> (raw)

The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq6018-cp01 board.

[V3]
 * Removed clock driver and bindings from this patch series, and added them
   as a different series.
 * Removed qpic_padN from pinctrl driver.
 * Addressed review comments in dts, and added the remaining fixed clocks their
 * Fixed review comments in pinctrl bindings
 * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
   dependency with,
	https://patchwork.ozlabs.org/patch/1217293/

[v2]
 * Splitted dt bindings  and driver into different patches. Added missing bindings
   and some style changes.
 * Added ipq6018 schema
 * Addressed review comments for gcc clock bindings.
 * Removed all clk critical flags, removed 1/1 factor clocks, moved to new
   way of specifying clk parents, and addressed other review comments.
 * Sorted nodes based on address, name, label. Removed unused clock nodes,
   Addressed other review comments.

Sricharan R (5):
  dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
  pinctrl: qcom: Add ipq6018 pinctrl driver
  dt-bindings: qcom: Add ipq6018 bindings
  arm64: dts: Add ipq6018 SoC and CP01 board support
  arm64: defconfig: Enable qcom ipq6018 clock and pinctrl

 Documentation/devicetree/bindings/arm/qcom.yaml    |    8 +
 .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml     |  174 +++
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts       |   30 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |  263 +++++
 arch/arm64/configs/defconfig                       |    3 +
 drivers/pinctrl/qcom/Kconfig                       |   10 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq6018.c             | 1107 ++++++++++++++++++++
 9 files changed, 1597 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c

-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Sricharan R <sricharan@codeaurora.org>
To: sricharan@codeaurora.org, agross@kernel.org,
	devicetree@vger.kernel.org, linus.walleij@linaro.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-soc@vger.kernel.org, robh+dt@kernel.org, sboyd@kernel.org,
	sivaprak@codeaurora.org
Subject: [PATCH V3 0/5] Add minimal boot support for IPQ6018
Date: Fri,  3 Jan 2020 17:19:32 +0530	[thread overview]
Message-ID: <1578052177-6778-1-git-send-email-sricharan@codeaurora.org> (raw)

The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq6018-cp01 board.

[V3]
 * Removed clock driver and bindings from this patch series, and added them
   as a different series.
 * Removed qpic_padN from pinctrl driver.
 * Addressed review comments in dts, and added the remaining fixed clocks their
 * Fixed review comments in pinctrl bindings
 * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
   dependency with,
	https://patchwork.ozlabs.org/patch/1217293/

[v2]
 * Splitted dt bindings  and driver into different patches. Added missing bindings
   and some style changes.
 * Added ipq6018 schema
 * Addressed review comments for gcc clock bindings.
 * Removed all clk critical flags, removed 1/1 factor clocks, moved to new
   way of specifying clk parents, and addressed other review comments.
 * Sorted nodes based on address, name, label. Removed unused clock nodes,
   Addressed other review comments.

Sricharan R (5):
  dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
  pinctrl: qcom: Add ipq6018 pinctrl driver
  dt-bindings: qcom: Add ipq6018 bindings
  arm64: dts: Add ipq6018 SoC and CP01 board support
  arm64: defconfig: Enable qcom ipq6018 clock and pinctrl

 Documentation/devicetree/bindings/arm/qcom.yaml    |    8 +
 .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml     |  174 +++
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts       |   30 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |  263 +++++
 arch/arm64/configs/defconfig                       |    3 +
 drivers/pinctrl/qcom/Kconfig                       |   10 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq6018.c             | 1107 ++++++++++++++++++++
 9 files changed, 1597 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c

-- 
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-01-03 11:49 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-03 11:49 Sricharan R [this message]
2020-01-03 11:49 ` [PATCH V3 0/5] Add minimal boot support for IPQ6018 Sricharan R
2020-01-03 11:49 ` [PATCH V3 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings Sricharan R
2020-01-03 11:49   ` Sricharan R
2020-01-04  0:58   ` Rob Herring
2020-01-04  0:58     ` Rob Herring
2020-01-06  5:25     ` Sricharan R
2020-01-06  5:25       ` Sricharan R
2020-01-07 11:55   ` Linus Walleij
2020-01-07 11:55     ` Linus Walleij
2020-01-09  9:21     ` Sricharan R
2020-01-09  9:21       ` Sricharan R
2020-01-03 11:49 ` [PATCH V3 2/5] pinctrl: qcom: Add ipq6018 pinctrl driver Sricharan R
2020-01-03 11:49   ` Sricharan R
2020-01-04  1:33   ` Bjorn Andersson
2020-01-04  1:33     ` Bjorn Andersson
2020-01-03 11:49 ` [PATCH V3 3/5] dt-bindings: qcom: Add ipq6018 bindings Sricharan R
2020-01-03 11:49   ` Sricharan R
2020-01-04  0:59   ` Rob Herring
2020-01-04  0:59     ` Rob Herring
2020-01-03 11:49 ` [PATCH V3 4/5] arm64: dts: Add ipq6018 SoC and CP01 board support Sricharan R
2020-01-03 11:49   ` Sricharan R
2020-01-03 11:49 ` [PATCH V3 5/5] arm64: defconfig: Enable qcom ipq6018 clock and pinctrl Sricharan R
2020-01-03 11:49   ` Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1578052177-6778-1-git-send-email-sricharan@codeaurora.org \
    --to=sricharan@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sivaprak@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.