From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v6 09/12] ARM: dts: aspeed: ast2500: Add XDMA Engine
Date: Wed, 15 Jan 2020 15:29:47 -0600 [thread overview]
Message-ID: <1579123790-6894-10-git-send-email-eajames@linux.ibm.com> (raw)
In-Reply-To: <1579123790-6894-1-git-send-email-eajames@linux.ibm.com>
Add a node for the XDMA engine with all the necessary information.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1c40c8f..f3fb659 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
/ {
model = "Aspeed BMC";
@@ -259,6 +260,17 @@
interrupts = <0x19>;
};
+ xdma: xdma at 1e6e7000 {
+ compatible = "aspeed,ast2500-xdma";
+ reg = <0x1e6e7000 0x100>;
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ resets = <&syscon ASPEED_RESET_XDMA>;
+ interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+ pcie-device = "bmc";
+ aspeed,scu = <&syscon>;
+ status = "disabled";
+ };
+
adc: adc at 1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
--
1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
mark.rutland@arm.com, jason@lakedaemon.net, maz@kernel.org,
robh+dt@kernel.org, tglx@linutronix.de, joel@jms.id.au,
andrew@aj.id.au, eajames@linux.ibm.com
Subject: [PATCH v6 09/12] ARM: dts: aspeed: ast2500: Add XDMA Engine
Date: Wed, 15 Jan 2020 15:29:47 -0600 [thread overview]
Message-ID: <1579123790-6894-10-git-send-email-eajames@linux.ibm.com> (raw)
In-Reply-To: <1579123790-6894-1-git-send-email-eajames@linux.ibm.com>
Add a node for the XDMA engine with all the necessary information.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1c40c8f..f3fb659 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
/ {
model = "Aspeed BMC";
@@ -259,6 +260,17 @@
interrupts = <0x19>;
};
+ xdma: xdma@1e6e7000 {
+ compatible = "aspeed,ast2500-xdma";
+ reg = <0x1e6e7000 0x100>;
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ resets = <&syscon ASPEED_RESET_XDMA>;
+ interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+ pcie-device = "bmc";
+ aspeed,scu = <&syscon>;
+ status = "disabled";
+ };
+
adc: adc@1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
--
1.8.3.1
next prev parent reply other threads:[~2020-01-15 21:29 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 21:29 [PATCH v6 00/12] aspeed: Add SCU interrupt controller and XDMA engine drivers Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-15 21:29 ` [PATCH v6 01/12] dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Eddie James
2020-01-15 21:29 ` [PATCH v6 02/12] irqchip: " Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Eddie James
2020-01-15 21:29 ` [PATCH v6 03/12] ARM: dts: aspeed: ast2500: Add " Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-15 21:29 ` [PATCH v6 04/12] ARM: dts: aspeed: ast2600: Add SCU interrupt controllers Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-15 21:29 ` [PATCH v6 05/12] dt-bindings: soc: Add Aspeed XDMA Engine Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-17 0:01 ` Andrew Jeffery
2020-01-17 0:01 ` Andrew Jeffery
2020-01-15 21:29 ` [PATCH v6 06/12] soc: aspeed: Add XDMA Engine Driver Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-17 0:07 ` Andrew Jeffery
2020-01-17 0:07 ` Andrew Jeffery
2020-02-10 16:35 ` Arnd Bergmann
2020-02-10 16:35 ` Arnd Bergmann
2020-02-10 17:10 ` Eddie James
2020-02-10 17:10 ` Eddie James
2020-03-16 4:49 ` Joel Stanley
2020-03-16 4:49 ` Joel Stanley
2020-02-16 23:56 ` Andrew Jeffery
2020-02-16 23:56 ` Andrew Jeffery
2020-01-15 21:29 ` [PATCH v6 07/12] soc: aspeed: xdma: Add user interface Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-17 0:09 ` Andrew Jeffery
2020-01-17 0:09 ` Andrew Jeffery
2020-01-15 21:29 ` [PATCH v6 08/12] soc: aspeed: xdma: Add reset ioctl Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-15 21:29 ` Eddie James [this message]
2020-01-15 21:29 ` [PATCH v6 09/12] ARM: dts: aspeed: ast2500: Add XDMA Engine Eddie James
2020-01-15 21:29 ` [PATCH v6 10/12] ARM: dts: aspeed: ast2600: " Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-15 21:29 ` [PATCH v6 11/12] ARM: dts: aspeed: witherspoon: Enable " Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-17 0:12 ` Andrew Jeffery
2020-01-17 0:12 ` Andrew Jeffery
2020-01-15 21:29 ` [PATCH v6 12/12] ARM: dts: aspeed: tacoma: Enable XDMA engine Eddie James
2020-01-15 21:29 ` Eddie James
2020-01-17 0:13 ` Andrew Jeffery
2020-01-17 0:13 ` Andrew Jeffery
2020-01-20 8:54 ` [PATCH v6 00/12] aspeed: Add SCU interrupt controller and XDMA engine drivers Marc Zyngier
2020-01-20 8:54 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1579123790-6894-10-git-send-email-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.