* [PATCH v2 0/2] ARM: dts: aspeed: Fix SCU IRQ controller node addresses
@ 2020-02-10 19:32 ` Eddie James
0 siblings, 0 replies; 10+ messages in thread
From: Eddie James @ 2020-02-10 19:32 UTC (permalink / raw)
To: linux-aspeed
Warnings were introduced due to unit address on nodes that had no reg property.
Add the reg properties for the nodes to fix the warnings.
Eddie James (2):
ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++--
2 files changed, 5 insertions(+), 2 deletions(-)
--
1.8.3.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 0/2] ARM: dts: aspeed: Fix SCU IRQ controller node addresses
@ 2020-02-10 19:32 ` Eddie James
0 siblings, 0 replies; 10+ messages in thread
From: Eddie James @ 2020-02-10 19:32 UTC (permalink / raw)
To: linux-aspeed; +Cc: andrew, Eddie James, joel, linux-arm-kernel
Warnings were introduced due to unit address on nodes that had no reg property.
Add the reg properties for the nodes to fix the warnings.
Eddie James (2):
ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++--
2 files changed, 5 insertions(+), 2 deletions(-)
--
1.8.3.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 1/2] ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
2020-02-10 19:32 ` Eddie James
@ 2020-02-10 19:32 ` Eddie James
-1 siblings, 0 replies; 10+ messages in thread
From: Eddie James @ 2020-02-10 19:32 UTC (permalink / raw)
To: linux-aspeed
The node was defined with a unit address but had no reg property,
resulting in a warning. Add a reg property for consistency to fix the
warning.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 569f9d7..9db7bde 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -225,6 +225,7 @@
scu_ic: interrupt-controller at 18 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2500-scu-ic";
+ reg = <0x18 0x4>;
interrupts = <21>;
interrupt-controller;
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v2 1/2] ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
@ 2020-02-10 19:32 ` Eddie James
0 siblings, 0 replies; 10+ messages in thread
From: Eddie James @ 2020-02-10 19:32 UTC (permalink / raw)
To: linux-aspeed; +Cc: andrew, Eddie James, joel, linux-arm-kernel
The node was defined with a unit address but had no reg property,
resulting in a warning. Add a reg property for consistency to fix the
warning.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 569f9d7..9db7bde 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -225,6 +225,7 @@
scu_ic: interrupt-controller@18 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2500-scu-ic";
+ reg = <0x18 0x4>;
interrupts = <21>;
interrupt-controller;
};
--
1.8.3.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v2 1/2] ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
2020-02-10 19:32 ` Eddie James
@ 2020-02-16 23:52 ` Andrew Jeffery
-1 siblings, 0 replies; 10+ messages in thread
From: Andrew Jeffery @ 2020-02-16 23:52 UTC (permalink / raw)
To: linux-aspeed
On Tue, 11 Feb 2020, at 06:02, Eddie James wrote:
> The node was defined with a unit address but had no reg property,
> resulting in a warning. Add a reg property for consistency to fix the
> warning.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index 569f9d7..9db7bde 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -225,6 +225,7 @@
> scu_ic: interrupt-controller at 18 {
> #interrupt-cells = <1>;
> compatible = "aspeed,ast2500-scu-ic";
> + reg = <0x18 0x4>;
> interrupts = <21>;
> interrupt-controller;
> };
> --
> 1.8.3.1
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v2 1/2] ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
@ 2020-02-16 23:52 ` Andrew Jeffery
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Jeffery @ 2020-02-16 23:52 UTC (permalink / raw)
To: Eddie James, linux-aspeed; +Cc: Joel Stanley, linux-arm-kernel
On Tue, 11 Feb 2020, at 06:02, Eddie James wrote:
> The node was defined with a unit address but had no reg property,
> resulting in a warning. Add a reg property for consistency to fix the
> warning.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index 569f9d7..9db7bde 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -225,6 +225,7 @@
> scu_ic: interrupt-controller@18 {
> #interrupt-cells = <1>;
> compatible = "aspeed,ast2500-scu-ic";
> + reg = <0x18 0x4>;
> interrupts = <21>;
> interrupt-controller;
> };
> --
> 1.8.3.1
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 2/2] ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
2020-02-10 19:32 ` Eddie James
@ 2020-02-10 19:32 ` Eddie James
-1 siblings, 0 replies; 10+ messages in thread
From: Eddie James @ 2020-02-10 19:32 UTC (permalink / raw)
To: linux-aspeed
The nodes were defined with a unit address but had no reg property,
resulting in a warning. Add the reg properties for consistency to fix
the warning.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 82a3cd1..301fdb4 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -269,16 +269,18 @@
reg = <0x180 0x40>;
};
- scu_ic0: interrupt-controller at 0 {
+ scu_ic0: interrupt-controller at 560 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2600-scu-ic0";
+ reg = <0x560 0x4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
- scu_ic1: interrupt-controller at 1 {
+ scu_ic1: interrupt-controller at 570 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2600-scu-ic1";
+ reg = <0x570 0x4>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v2 2/2] ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
@ 2020-02-10 19:32 ` Eddie James
0 siblings, 0 replies; 10+ messages in thread
From: Eddie James @ 2020-02-10 19:32 UTC (permalink / raw)
To: linux-aspeed; +Cc: andrew, Eddie James, joel, linux-arm-kernel
The nodes were defined with a unit address but had no reg property,
resulting in a warning. Add the reg properties for consistency to fix
the warning.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 82a3cd1..301fdb4 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -269,16 +269,18 @@
reg = <0x180 0x40>;
};
- scu_ic0: interrupt-controller@0 {
+ scu_ic0: interrupt-controller@560 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2600-scu-ic0";
+ reg = <0x560 0x4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
- scu_ic1: interrupt-controller@1 {
+ scu_ic1: interrupt-controller@570 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2600-scu-ic1";
+ reg = <0x570 0x4>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
--
1.8.3.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v2 2/2] ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
2020-02-10 19:32 ` Eddie James
@ 2020-02-16 23:54 ` Andrew Jeffery
-1 siblings, 0 replies; 10+ messages in thread
From: Andrew Jeffery @ 2020-02-16 23:54 UTC (permalink / raw)
To: linux-aspeed
On Tue, 11 Feb 2020, at 06:02, Eddie James wrote:
> The nodes were defined with a unit address but had no reg property,
> resulting in a warning. Add the reg properties for consistency to fix
> the warning.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index 82a3cd1..301fdb4 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -269,16 +269,18 @@
> reg = <0x180 0x40>;
> };
>
> - scu_ic0: interrupt-controller at 0 {
> + scu_ic0: interrupt-controller at 560 {
> #interrupt-cells = <1>;
> compatible = "aspeed,ast2600-scu-ic0";
> + reg = <0x560 0x4>;
> interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-controller;
> };
>
> - scu_ic1: interrupt-controller at 1 {
> + scu_ic1: interrupt-controller at 570 {
> #interrupt-cells = <1>;
> compatible = "aspeed,ast2600-scu-ic1";
> + reg = <0x570 0x4>;
> interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-controller;
> };
> --
> 1.8.3.1
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v2 2/2] ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
@ 2020-02-16 23:54 ` Andrew Jeffery
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Jeffery @ 2020-02-16 23:54 UTC (permalink / raw)
To: Eddie James, linux-aspeed; +Cc: Joel Stanley, linux-arm-kernel
On Tue, 11 Feb 2020, at 06:02, Eddie James wrote:
> The nodes were defined with a unit address but had no reg property,
> resulting in a warning. Add the reg properties for consistency to fix
> the warning.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index 82a3cd1..301fdb4 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -269,16 +269,18 @@
> reg = <0x180 0x40>;
> };
>
> - scu_ic0: interrupt-controller@0 {
> + scu_ic0: interrupt-controller@560 {
> #interrupt-cells = <1>;
> compatible = "aspeed,ast2600-scu-ic0";
> + reg = <0x560 0x4>;
> interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-controller;
> };
>
> - scu_ic1: interrupt-controller@1 {
> + scu_ic1: interrupt-controller@570 {
> #interrupt-cells = <1>;
> compatible = "aspeed,ast2600-scu-ic1";
> + reg = <0x570 0x4>;
> interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-controller;
> };
> --
> 1.8.3.1
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-02-16 23:54 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-02-10 19:32 [PATCH v2 0/2] ARM: dts: aspeed: Fix SCU IRQ controller node addresses Eddie James
2020-02-10 19:32 ` Eddie James
2020-02-10 19:32 ` [PATCH v2 1/2] ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node Eddie James
2020-02-10 19:32 ` Eddie James
2020-02-16 23:52 ` Andrew Jeffery
2020-02-16 23:52 ` Andrew Jeffery
2020-02-10 19:32 ` [PATCH v2 2/2] ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes Eddie James
2020-02-10 19:32 ` Eddie James
2020-02-16 23:54 ` Andrew Jeffery
2020-02-16 23:54 ` Andrew Jeffery
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.