[PATCH] drm/msm/a5xx: Always set an OPP supported hardware value

[Jordan Crouse <jcrouse@codeaurora.org>]

If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.

Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---

 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 7d9e63e..724024a 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -1446,18 +1446,31 @@ static const struct adreno_gpu_funcs funcs = {
 static void check_speed_bin(struct device *dev)
 {
 	struct nvmem_cell *cell;
-	u32 bin, val;
+	u32 val;
+
+	/*
+	 * If the OPP table specifies a opp-supported-hw property then we have
+	 * to set something with dev_pm_opp_set_supported_hw() or the table
+	 * doesn't get populated so pick an arbitrary value that should
+	 * ensure the default frequencies are selected but not conflict with any
+	 * actual bins
+	 */
+	val = 0x80;
 
 	cell = nvmem_cell_get(dev, "speed_bin");
 
-	/* If a nvmem cell isn't defined, nothing to do */
-	if (IS_ERR(cell))
-		return;
+	if (!IS_ERR(cell)) {
+		void *buf = nvmem_cell_read(cell, NULL);
+
+		if (!IS_ERR(buf)) {
+			u8 bin = *((u8 *) buf);
 
-	bin = *((u32 *) nvmem_cell_read(cell, NULL));
-	nvmem_cell_put(cell);
+			val = (1 << bin);
+			kfree(buf);
+		}
 
-	val = (1 << bin);
+		nvmem_cell_put(cell);
+	}
 
 	dev_pm_opp_set_supported_hw(dev, &val, 1);
 }
-- 
2.7.4