From: Bibby Hsieh <bibby.hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Cc: Tomasz Figa <tfiga-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
"Rafael J. Wysocki" <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Bartosz Golaszewski
<bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
linux-i2c <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Nicolas Boichat
<drinkcat-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
srv_heupstream
<srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
linux-devicetree
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux PM <linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v10 4/4] i2c: core: support bus regulator controlling in adapter
Date: Fri, 21 Feb 2020 11:22:33 +0800 [thread overview]
Message-ID: <1582255353.19370.2.camel@mtksdaap41> (raw)
In-Reply-To: <CAAFQd5DtnBhGV-VemTwudm7K-UtFsGg99YGuD-cyR93u0OAPuA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Hi, Rafael,
I'm Sorry to bother you.
I'm not sure if you receive our email...
So I re-sent this email to your another email.
Thanks.
Bibby
On Mon, 2020-02-17 at 18:45 +0900, Tomasz Figa wrote:
> Hi Rafael,
>
> On Tue, Jan 28, 2020 at 4:31 PM Tomasz Figa <tfiga@chromium.org> wrote:
> >
> > Hi Rafael,
> >
> > On Thu, Jan 16, 2020 at 11:56 AM Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> > >
> > > Although in the most platforms, the bus power of i2c
> > > are alway on, some platforms disable the i2c bus power
> > > in order to meet low power request.
> > >
> > > We get and enable bulk regulator in i2c adapter device.
> > >
> > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > > ---
> > > drivers/i2c/i2c-core-base.c | 81 +++++++++++++++++++++++++++++++++++++
> > > include/linux/i2c.h | 3 ++
> > > 2 files changed, 84 insertions(+)
> > >
> >
> > I posted some comments in a separate reply [1] and Wolfram confirmed
> > that he's fine with the approach [2]. Would you have some time to take
> > a look from the PM point of view? Thanks.
> >
> > [1] https://patchwork.ozlabs.org/patch/1223991/#2350984
> > [2] https://patchwork.ozlabs.org/patch/1223991/#2351032
> >
> > Please let me know if you want me to CC you directly on any of those replies.
>
> Would you have a few minutes to take a look at this?
>
> Thanks,
> Tomasz
>
> >
> > Best regards,
> > Tomasz
> >
> > > diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
> > > index 9333c865d4a9..9b9e96b094ca 100644
> > > --- a/drivers/i2c/i2c-core-base.c
> > > +++ b/drivers/i2c/i2c-core-base.c
> > > @@ -306,6 +306,7 @@ static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
> > > static int i2c_device_probe(struct device *dev)
> > > {
> > > struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > struct i2c_driver *driver;
> > > int status;
> > >
> > > @@ -371,6 +372,12 @@ static int i2c_device_probe(struct device *dev)
> > >
> > > dev_dbg(dev, "probe\n");
> > >
> > > + status = regulator_enable(adap->bus_reg);
> > > + if (status != 0) {
> > > + dev_err(&adap->dev, "Failed to enable power regulator\n");
> > > + goto err_clear_wakeup_irq;
> > > + }
> > > +
> > > status = of_clk_set_defaults(dev->of_node, false);
> > > if (status < 0)
> > > goto err_clear_wakeup_irq;
> > > @@ -407,6 +414,7 @@ static int i2c_device_probe(struct device *dev)
> > > static int i2c_device_remove(struct device *dev)
> > > {
> > > struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > struct i2c_driver *driver;
> > > int status = 0;
> > >
> > > @@ -420,6 +428,8 @@ static int i2c_device_remove(struct device *dev)
> > > }
> > >
> > > dev_pm_domain_detach(&client->dev, true);
> > > + if (!pm_runtime_status_suspended(&adap->dev))
> > > + regulator_disable(adap->bus_reg);
> > >
> > > dev_pm_clear_wake_irq(&client->dev);
> > > device_init_wakeup(&client->dev, false);
> > > @@ -431,6 +441,71 @@ static int i2c_device_remove(struct device *dev)
> > > return status;
> > > }
> > >
> > > +#ifdef CONFIG_PM_SLEEP
> > > +static int i2c_resume(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + if (pm_runtime_status_suspended(&adap->dev)) {
> > > + err = regulator_enable(adap->bus_reg);
> > > + if (err)
> > > + return err;
> > > + }
> > > +
> > > + return pm_generic_resume(dev);
> > > +}
> > > +
> > > +static int i2c_suspend(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + if (!pm_runtime_status_suspended(&adap->dev)) {
> > > + err = regulator_disable(adap->bus_reg);
> > > + if (err)
> > > + return err;
> > > + }
> > > +
> > > + return pm_generic_suspend(dev);
> > > +}
> > > +#endif
> > > +
> > > +#ifdef CONFIG_PM
> > > +static int i2c_runtime_resume(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + err = regulator_enable(adap->bus_reg);
> > > + if (err)
> > > + return err;
> > > +
> > > + return pm_generic_runtime_resume(dev);
> > > +}
> > > +
> > > +static int i2c_runtime_suspend(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + err = pm_generic_runtime_suspend(dev);
> > > + if (err)
> > > + return err;
> > > +
> > > + return regulator_disable(adap->bus_reg);
> > > +}
> > > +#endif
> > > +
> > > +static const struct dev_pm_ops i2c_device_pm = {
> > > + SET_SYSTEM_SLEEP_PM_OPS(i2c_suspend, i2c_resume)
> > > + SET_RUNTIME_PM_OPS(i2c_runtime_suspend, i2c_runtime_resume, NULL)
> > > +};
> > > +
> > > static void i2c_device_shutdown(struct device *dev)
> > > {
> > > struct i2c_client *client = i2c_verify_client(dev);
> > > @@ -488,6 +563,7 @@ struct bus_type i2c_bus_type = {
> > > .probe = i2c_device_probe,
> > > .remove = i2c_device_remove,
> > > .shutdown = i2c_device_shutdown,
> > > + .pm = &i2c_device_pm,
> > > };
> > > EXPORT_SYMBOL_GPL(i2c_bus_type);
> > >
> > > @@ -1351,6 +1427,11 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
> > > goto out_reg;
> > >
> > > dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
> > > + adap->bus_reg = devm_regulator_get(&adap->dev, "bus");
> > > + if (IS_ERR(adap->bus_reg)) {
> > > + res = PTR_ERR(adap->bus_reg);
> > > + goto out_reg;
> > > + }
> > >
> > > pm_runtime_no_callbacks(&adap->dev);
> > > pm_suspend_ignore_children(&adap->dev, true);
> > > diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> > > index d2f786706657..833b81a680da 100644
> > > --- a/include/linux/i2c.h
> > > +++ b/include/linux/i2c.h
> > > @@ -15,6 +15,7 @@
> > > #include <linux/device.h> /* for struct device */
> > > #include <linux/sched.h> /* for completion */
> > > #include <linux/mutex.h>
> > > +#include <linux/regulator/consumer.h>
> > > #include <linux/rtmutex.h>
> > > #include <linux/irqdomain.h> /* for Host Notify IRQ */
> > > #include <linux/of.h> /* for struct device_node */
> > > @@ -330,6 +331,7 @@ struct i2c_client {
> > > int init_irq; /* irq set at initialization */
> > > int irq; /* irq issued by device */
> > > struct list_head detected;
> > > +
> > > #if IS_ENABLED(CONFIG_I2C_SLAVE)
> > > i2c_slave_cb_t slave_cb; /* callback for slave mode */
> > > #endif
> > > @@ -723,6 +725,7 @@ struct i2c_adapter {
> > > const struct i2c_adapter_quirks *quirks;
> > >
> > > struct irq_domain *host_notify_domain;
> > > + struct regulator *bus_reg;
> > > };
> > > #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
> > >
> > > --
> > > 2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: <rafael.j.wysocki@intel.com>
Cc: Tomasz Figa <tfiga@chromium.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Wolfram Sang <wsa@the-dreams.de>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-i2c <linux-i2c@vger.kernel.org>,
"Nicolas Boichat" <drinkcat@chromium.org>,
srv_heupstream <srv_heupstream@mediatek.com>,
Rob Herring <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
linux-devicetree <devicetree@vger.kernel.org>,
Linux PM <linux-pm@vger.kernel.org>
Subject: Re: [PATCH v10 4/4] i2c: core: support bus regulator controlling in adapter
Date: Fri, 21 Feb 2020 11:22:33 +0800 [thread overview]
Message-ID: <1582255353.19370.2.camel@mtksdaap41> (raw)
In-Reply-To: <CAAFQd5DtnBhGV-VemTwudm7K-UtFsGg99YGuD-cyR93u0OAPuA@mail.gmail.com>
Hi, Rafael,
I'm Sorry to bother you.
I'm not sure if you receive our email...
So I re-sent this email to your another email.
Thanks.
Bibby
On Mon, 2020-02-17 at 18:45 +0900, Tomasz Figa wrote:
> Hi Rafael,
>
> On Tue, Jan 28, 2020 at 4:31 PM Tomasz Figa <tfiga@chromium.org> wrote:
> >
> > Hi Rafael,
> >
> > On Thu, Jan 16, 2020 at 11:56 AM Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> > >
> > > Although in the most platforms, the bus power of i2c
> > > are alway on, some platforms disable the i2c bus power
> > > in order to meet low power request.
> > >
> > > We get and enable bulk regulator in i2c adapter device.
> > >
> > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > > ---
> > > drivers/i2c/i2c-core-base.c | 81 +++++++++++++++++++++++++++++++++++++
> > > include/linux/i2c.h | 3 ++
> > > 2 files changed, 84 insertions(+)
> > >
> >
> > I posted some comments in a separate reply [1] and Wolfram confirmed
> > that he's fine with the approach [2]. Would you have some time to take
> > a look from the PM point of view? Thanks.
> >
> > [1] https://patchwork.ozlabs.org/patch/1223991/#2350984
> > [2] https://patchwork.ozlabs.org/patch/1223991/#2351032
> >
> > Please let me know if you want me to CC you directly on any of those replies.
>
> Would you have a few minutes to take a look at this?
>
> Thanks,
> Tomasz
>
> >
> > Best regards,
> > Tomasz
> >
> > > diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
> > > index 9333c865d4a9..9b9e96b094ca 100644
> > > --- a/drivers/i2c/i2c-core-base.c
> > > +++ b/drivers/i2c/i2c-core-base.c
> > > @@ -306,6 +306,7 @@ static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
> > > static int i2c_device_probe(struct device *dev)
> > > {
> > > struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > struct i2c_driver *driver;
> > > int status;
> > >
> > > @@ -371,6 +372,12 @@ static int i2c_device_probe(struct device *dev)
> > >
> > > dev_dbg(dev, "probe\n");
> > >
> > > + status = regulator_enable(adap->bus_reg);
> > > + if (status != 0) {
> > > + dev_err(&adap->dev, "Failed to enable power regulator\n");
> > > + goto err_clear_wakeup_irq;
> > > + }
> > > +
> > > status = of_clk_set_defaults(dev->of_node, false);
> > > if (status < 0)
> > > goto err_clear_wakeup_irq;
> > > @@ -407,6 +414,7 @@ static int i2c_device_probe(struct device *dev)
> > > static int i2c_device_remove(struct device *dev)
> > > {
> > > struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > struct i2c_driver *driver;
> > > int status = 0;
> > >
> > > @@ -420,6 +428,8 @@ static int i2c_device_remove(struct device *dev)
> > > }
> > >
> > > dev_pm_domain_detach(&client->dev, true);
> > > + if (!pm_runtime_status_suspended(&adap->dev))
> > > + regulator_disable(adap->bus_reg);
> > >
> > > dev_pm_clear_wake_irq(&client->dev);
> > > device_init_wakeup(&client->dev, false);
> > > @@ -431,6 +441,71 @@ static int i2c_device_remove(struct device *dev)
> > > return status;
> > > }
> > >
> > > +#ifdef CONFIG_PM_SLEEP
> > > +static int i2c_resume(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + if (pm_runtime_status_suspended(&adap->dev)) {
> > > + err = regulator_enable(adap->bus_reg);
> > > + if (err)
> > > + return err;
> > > + }
> > > +
> > > + return pm_generic_resume(dev);
> > > +}
> > > +
> > > +static int i2c_suspend(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + if (!pm_runtime_status_suspended(&adap->dev)) {
> > > + err = regulator_disable(adap->bus_reg);
> > > + if (err)
> > > + return err;
> > > + }
> > > +
> > > + return pm_generic_suspend(dev);
> > > +}
> > > +#endif
> > > +
> > > +#ifdef CONFIG_PM
> > > +static int i2c_runtime_resume(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + err = regulator_enable(adap->bus_reg);
> > > + if (err)
> > > + return err;
> > > +
> > > + return pm_generic_runtime_resume(dev);
> > > +}
> > > +
> > > +static int i2c_runtime_suspend(struct device *dev)
> > > +{
> > > + struct i2c_client *client = i2c_verify_client(dev);
> > > + struct i2c_adapter *adap = client->adapter;
> > > + int err;
> > > +
> > > + err = pm_generic_runtime_suspend(dev);
> > > + if (err)
> > > + return err;
> > > +
> > > + return regulator_disable(adap->bus_reg);
> > > +}
> > > +#endif
> > > +
> > > +static const struct dev_pm_ops i2c_device_pm = {
> > > + SET_SYSTEM_SLEEP_PM_OPS(i2c_suspend, i2c_resume)
> > > + SET_RUNTIME_PM_OPS(i2c_runtime_suspend, i2c_runtime_resume, NULL)
> > > +};
> > > +
> > > static void i2c_device_shutdown(struct device *dev)
> > > {
> > > struct i2c_client *client = i2c_verify_client(dev);
> > > @@ -488,6 +563,7 @@ struct bus_type i2c_bus_type = {
> > > .probe = i2c_device_probe,
> > > .remove = i2c_device_remove,
> > > .shutdown = i2c_device_shutdown,
> > > + .pm = &i2c_device_pm,
> > > };
> > > EXPORT_SYMBOL_GPL(i2c_bus_type);
> > >
> > > @@ -1351,6 +1427,11 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
> > > goto out_reg;
> > >
> > > dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
> > > + adap->bus_reg = devm_regulator_get(&adap->dev, "bus");
> > > + if (IS_ERR(adap->bus_reg)) {
> > > + res = PTR_ERR(adap->bus_reg);
> > > + goto out_reg;
> > > + }
> > >
> > > pm_runtime_no_callbacks(&adap->dev);
> > > pm_suspend_ignore_children(&adap->dev, true);
> > > diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> > > index d2f786706657..833b81a680da 100644
> > > --- a/include/linux/i2c.h
> > > +++ b/include/linux/i2c.h
> > > @@ -15,6 +15,7 @@
> > > #include <linux/device.h> /* for struct device */
> > > #include <linux/sched.h> /* for completion */
> > > #include <linux/mutex.h>
> > > +#include <linux/regulator/consumer.h>
> > > #include <linux/rtmutex.h>
> > > #include <linux/irqdomain.h> /* for Host Notify IRQ */
> > > #include <linux/of.h> /* for struct device_node */
> > > @@ -330,6 +331,7 @@ struct i2c_client {
> > > int init_irq; /* irq set at initialization */
> > > int irq; /* irq issued by device */
> > > struct list_head detected;
> > > +
> > > #if IS_ENABLED(CONFIG_I2C_SLAVE)
> > > i2c_slave_cb_t slave_cb; /* callback for slave mode */
> > > #endif
> > > @@ -723,6 +725,7 @@ struct i2c_adapter {
> > > const struct i2c_adapter_quirks *quirks;
> > >
> > > struct irq_domain *host_notify_domain;
> > > + struct regulator *bus_reg;
> > > };
> > > #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
> > >
> > > --
> > > 2.18.0
next prev parent reply other threads:[~2020-02-21 3:22 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 2:56 [PATCH v10 0/4] add power control in i2c and at24 Bibby Hsieh
2020-01-16 2:56 ` Bibby Hsieh
2020-01-16 2:56 ` [PATCH v10 1/4] dt-binding: eeprom: at24: add vcc-supply property Bibby Hsieh
2020-01-16 2:56 ` Bibby Hsieh
[not found] ` <20200116025637.3524-2-bibby.hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2020-01-23 11:56 ` Bartosz Golaszewski
2020-01-23 11:56 ` Bartosz Golaszewski
2020-01-16 2:56 ` [PATCH v10 3/4] misc: eeprom: at24: support pm_runtime control Bibby Hsieh
2020-01-16 2:56 ` Bibby Hsieh
2020-01-23 11:56 ` Bartosz Golaszewski
[not found] ` <20200116025637.3524-1-bibby.hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2020-01-16 2:56 ` [PATCH v10 2/4] dt-binding: i2c: add bus-supply property Bibby Hsieh
2020-01-16 2:56 ` Bibby Hsieh
2020-01-16 2:56 ` [PATCH v10 4/4] i2c: core: support bus regulator controlling in adapter Bibby Hsieh
2020-01-16 2:56 ` Bibby Hsieh
[not found] ` <20200116025637.3524-5-bibby.hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2020-01-28 3:57 ` Tomasz Figa
2020-01-28 3:57 ` Tomasz Figa
2020-01-28 6:36 ` Wolfram Sang
2020-01-28 6:36 ` Wolfram Sang
2020-01-28 7:32 ` Tomasz Figa
2020-01-28 7:32 ` Tomasz Figa
2020-01-28 7:31 ` Tomasz Figa
[not found] ` <CAAFQd5Bh9dUuu2fzxQSyuyRrEvN5o8PBqPCUTdrC5btN2Q1HVw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-02-17 9:45 ` Tomasz Figa
2020-02-17 9:45 ` Tomasz Figa
[not found] ` <CAAFQd5DtnBhGV-VemTwudm7K-UtFsGg99YGuD-cyR93u0OAPuA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-02-21 3:22 ` Bibby Hsieh [this message]
2020-02-21 3:22 ` Bibby Hsieh
2020-02-24 22:28 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582255353.19370.2.camel@mtksdaap41 \
--to=bibby.hsieh-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=drinkcat-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=tfiga-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.