All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krishna Manikandan <mkrishn@codeaurora.org>
To: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: Krishna Manikandan <mkrishn@codeaurora.org>,
	linux-kernel@vger.kernel.org, robdclark@gmail.com,
	seanpaul@chromium.org, hoegsberg@chromium.org,
	kalyan_t@codeaurora.org, nganji@codeaurora.org
Subject: [v1 1/2] msm: disp: dpu1: add DP support for sc7180 target
Date: Thu, 27 Feb 2020 12:55:31 +0530	[thread overview]
Message-ID: <1582788332-7282-1-git-send-email-mkrishn@codeaurora.org> (raw)

Add the required changes to support Display Port
for sc7180 target.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

This patch has dependency on DP driver changes in
https://patchwork.kernel.org/patch/11269169/
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c    |  6 ++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  3 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  4 ++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c    | 12 ++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c     |  4 ++++
 5 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index f8ac3bf..136e4d0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1109,6 +1109,12 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
 	}
 
 	if (dpu_enc->cur_master->hw_mdptop &&
+		(dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_TMDS) &&
+			dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select)
+		dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select(
+			dpu_enc->cur_master->hw_mdptop);
+
+	if (dpu_enc->cur_master->hw_mdptop &&
 			dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc)
 		dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc(
 				dpu_enc->cur_master->hw_mdptop,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index c567917..60f350f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -109,8 +109,9 @@
 	{
 	.name = "top_0", .id = MDP_TOP,
 	.base = 0x0, .len = 0x494,
-	.features = 0,
+	.features = BIT(DPU_MDP_DP_PHY_SEL),
 	.highest_bank_bit = 0x3,
+	.dp_phy_intf_sel = 0x41,
 	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
 		.reg_off = 0x2AC, .bit_off = 0},
 	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 09df7d8..fbcf14b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -77,6 +77,7 @@ enum {
  * @DPU_MDP_UBWC_1_0,      This chipsets supports Universal Bandwidth
  *                         compression initial revision
  * @DPU_MDP_UBWC_1_5,      Universal Bandwidth compression version 1.5
+ * @DPU_MDP_DP_PHY_SEL     DP PHY interface select for controller
  * @DPU_MDP_MAX            Maximum value
 
  */
@@ -86,6 +87,7 @@ enum {
 	DPU_MDP_BWC,
 	DPU_MDP_UBWC_1_0,
 	DPU_MDP_UBWC_1_5,
+	DPU_MDP_DP_PHY_SEL,
 	DPU_MDP_MAX
 };
 
@@ -421,6 +423,7 @@ struct dpu_clk_ctrl_reg {
  * @highest_bank_bit:  UBWC parameter
  * @ubwc_static:       ubwc static configuration
  * @ubwc_swizzle:      ubwc default swizzle setting
+ * @dp_phy_intf_sel:   dp phy interface select for controller
  * @clk_ctrls          clock control register definition
  */
 struct dpu_mdp_cfg {
@@ -428,6 +431,7 @@ struct dpu_mdp_cfg {
 	u32 highest_bank_bit;
 	u32 ubwc_static;
 	u32 ubwc_swizzle;
+	u32 dp_phy_intf_sel;
 	struct dpu_clk_ctrl_reg clk_ctrls[DPU_CLK_CTRL_MAX];
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index efe9a57..ae96ede 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -144,10 +144,22 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
 	display_hctl = (hsync_end_x << 16) | hsync_start_x;
 
+	if (ctx->cap->type == INTF_DP) {
+		active_h_start = hsync_start_x;
+		active_h_end = active_h_start + p->xres - 1;
+		active_v_start = display_v_start;
+		active_v_end = active_v_start + (p->yres * hsync_period) - 1;
+		active_hctl = (active_h_end << 16) | active_h_start;
+		display_hctl = active_hctl;
+	}
+
 	den_polarity = 0;
 	if (ctx->cap->type == INTF_HDMI) {
 		hsync_polarity = p->yres >= 720 ? 0 : 1;
 		vsync_polarity = p->yres >= 720 ? 0 : 1;
+	} else if (ctx->cap->type == INTF_DP) {
+		hsync_polarity = p->hsync_polarity;
+		vsync_polarity = p->vsync_polarity;
 	} else {
 		hsync_polarity = 0;
 		vsync_polarity = 0;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
index f9af52a..9591d42 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
@@ -41,6 +41,7 @@
 #define MDP_WD_TIMER_4_CTL                0x440
 #define MDP_WD_TIMER_4_CTL2               0x444
 #define MDP_WD_TIMER_4_LOAD_VALUE         0x448
+#define DP_PHY_INTF_SEL                   0x460
 
 #define MDP_TICK_COUNT                    16
 #define XO_CLK_RATE                       19200
@@ -275,6 +276,9 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
 	c = &mdp->hw;
 
 	DPU_REG_WRITE(c, HDMI_DP_CORE_SELECT, 0x1);
+
+	if (mdp->caps->features & BIT(DPU_MDP_DP_PHY_SEL))
+		DPU_REG_WRITE(c, DP_PHY_INTF_SEL, mdp->caps->dp_phy_intf_sel);
 }
 
 static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Krishna Manikandan <mkrishn@codeaurora.org>
To: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: Krishna Manikandan <mkrishn@codeaurora.org>,
	linux-kernel@vger.kernel.org, seanpaul@chromium.org,
	kalyan_t@codeaurora.org, hoegsberg@chromium.org
Subject: [v1 1/2] msm: disp: dpu1: add DP support for sc7180 target
Date: Thu, 27 Feb 2020 12:55:31 +0530	[thread overview]
Message-ID: <1582788332-7282-1-git-send-email-mkrishn@codeaurora.org> (raw)

Add the required changes to support Display Port
for sc7180 target.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

This patch has dependency on DP driver changes in
https://patchwork.kernel.org/patch/11269169/
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c    |  6 ++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  3 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  4 ++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c    | 12 ++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c     |  4 ++++
 5 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index f8ac3bf..136e4d0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1109,6 +1109,12 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
 	}
 
 	if (dpu_enc->cur_master->hw_mdptop &&
+		(dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_TMDS) &&
+			dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select)
+		dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select(
+			dpu_enc->cur_master->hw_mdptop);
+
+	if (dpu_enc->cur_master->hw_mdptop &&
 			dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc)
 		dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc(
 				dpu_enc->cur_master->hw_mdptop,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index c567917..60f350f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -109,8 +109,9 @@
 	{
 	.name = "top_0", .id = MDP_TOP,
 	.base = 0x0, .len = 0x494,
-	.features = 0,
+	.features = BIT(DPU_MDP_DP_PHY_SEL),
 	.highest_bank_bit = 0x3,
+	.dp_phy_intf_sel = 0x41,
 	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
 		.reg_off = 0x2AC, .bit_off = 0},
 	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 09df7d8..fbcf14b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -77,6 +77,7 @@ enum {
  * @DPU_MDP_UBWC_1_0,      This chipsets supports Universal Bandwidth
  *                         compression initial revision
  * @DPU_MDP_UBWC_1_5,      Universal Bandwidth compression version 1.5
+ * @DPU_MDP_DP_PHY_SEL     DP PHY interface select for controller
  * @DPU_MDP_MAX            Maximum value
 
  */
@@ -86,6 +87,7 @@ enum {
 	DPU_MDP_BWC,
 	DPU_MDP_UBWC_1_0,
 	DPU_MDP_UBWC_1_5,
+	DPU_MDP_DP_PHY_SEL,
 	DPU_MDP_MAX
 };
 
@@ -421,6 +423,7 @@ struct dpu_clk_ctrl_reg {
  * @highest_bank_bit:  UBWC parameter
  * @ubwc_static:       ubwc static configuration
  * @ubwc_swizzle:      ubwc default swizzle setting
+ * @dp_phy_intf_sel:   dp phy interface select for controller
  * @clk_ctrls          clock control register definition
  */
 struct dpu_mdp_cfg {
@@ -428,6 +431,7 @@ struct dpu_mdp_cfg {
 	u32 highest_bank_bit;
 	u32 ubwc_static;
 	u32 ubwc_swizzle;
+	u32 dp_phy_intf_sel;
 	struct dpu_clk_ctrl_reg clk_ctrls[DPU_CLK_CTRL_MAX];
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index efe9a57..ae96ede 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -144,10 +144,22 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
 	display_hctl = (hsync_end_x << 16) | hsync_start_x;
 
+	if (ctx->cap->type == INTF_DP) {
+		active_h_start = hsync_start_x;
+		active_h_end = active_h_start + p->xres - 1;
+		active_v_start = display_v_start;
+		active_v_end = active_v_start + (p->yres * hsync_period) - 1;
+		active_hctl = (active_h_end << 16) | active_h_start;
+		display_hctl = active_hctl;
+	}
+
 	den_polarity = 0;
 	if (ctx->cap->type == INTF_HDMI) {
 		hsync_polarity = p->yres >= 720 ? 0 : 1;
 		vsync_polarity = p->yres >= 720 ? 0 : 1;
+	} else if (ctx->cap->type == INTF_DP) {
+		hsync_polarity = p->hsync_polarity;
+		vsync_polarity = p->vsync_polarity;
 	} else {
 		hsync_polarity = 0;
 		vsync_polarity = 0;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
index f9af52a..9591d42 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
@@ -41,6 +41,7 @@
 #define MDP_WD_TIMER_4_CTL                0x440
 #define MDP_WD_TIMER_4_CTL2               0x444
 #define MDP_WD_TIMER_4_LOAD_VALUE         0x448
+#define DP_PHY_INTF_SEL                   0x460
 
 #define MDP_TICK_COUNT                    16
 #define XO_CLK_RATE                       19200
@@ -275,6 +276,9 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
 	c = &mdp->hw;
 
 	DPU_REG_WRITE(c, HDMI_DP_CORE_SELECT, 0x1);
+
+	if (mdp->caps->features & BIT(DPU_MDP_DP_PHY_SEL))
+		DPU_REG_WRITE(c, DP_PHY_INTF_SEL, mdp->caps->dp_phy_intf_sel);
 }
 
 static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2020-02-27  7:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-27  7:25 Krishna Manikandan [this message]
2020-02-27  7:25 ` [v1 1/2] msm: disp: dpu1: add DP support for sc7180 target Krishna Manikandan
2020-02-27  7:25 ` [v1 2/2] msm: disp: dpu1: fix reservations cleanup during modeset Krishna Manikandan
2020-02-27  7:25   ` Krishna Manikandan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1582788332-7282-1-git-send-email-mkrishn@codeaurora.org \
    --to=mkrishn@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=hoegsberg@chromium.org \
    --cc=kalyan_t@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nganji@codeaurora.org \
    --cc=robdclark@gmail.com \
    --cc=seanpaul@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.