Re: [PATCH v3 06/13] soc: mediatek: cmdq: add assign function

[CK Hu <ck.hu@mediatek.com>]

Hi, Dennis:

On Fri, 2020-02-28 at 21:44 +0800, Dennis YC Hsieh wrote:
> Add assign function in cmdq helper which assign constant value into
> internal register by index.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c   | 24 +++++++++++++++++++++++-
>  include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
>  include/linux/soc/mediatek/mtk-cmdq.h    | 14 ++++++++++++++
>  3 files changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 0698612de5ad..8342a5c94bc7 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -12,6 +12,7 @@
>  #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
>  #define CMDQ_POLL_ENABLE_MASK	BIT(0)
>  #define CMDQ_EOC_IRQ_EN		BIT(0)
> +#define CMDQ_REG_TYPE		1
>  
>  struct cmdq_instruction {
>  	union {
> @@ -21,8 +22,17 @@ struct cmdq_instruction {
>  	union {
>  		u16 offset;
>  		u16 event;
> +		u16 reg_dst;
> +	};
> +	union {
> +		u8 subsys;
> +		struct {
> +			u8 sop:5;
> +			u8 arg_c_t:1;
> +			u8 arg_b_t:1;
> +			u8 dst_t:1;
> +		};
>  	};
> -	u8 subsys;
>  	u8 op;
>  };
>  
> @@ -277,6 +287,18 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
>  }
>  EXPORT_SYMBOL(cmdq_pkt_poll_mask);
>  
> +int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
> +{
> +	struct cmdq_instruction inst = { {0} };
> +
> +	inst.op = CMDQ_CODE_LOGIC;
> +	inst.dst_t = CMDQ_REG_TYPE;
> +	inst.reg_dst = reg_idx;
> +	inst.value = value;
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_assign);
> +
>  static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
>  {
>  	struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index dfe5b2eb85cc..121c3bb6d3de 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -59,6 +59,7 @@ enum cmdq_code {
>  	CMDQ_CODE_JUMP = 0x10,
>  	CMDQ_CODE_WFE = 0x20,
>  	CMDQ_CODE_EOC = 0x40,
> +	CMDQ_CODE_LOGIC = 0xa0,
>  };
>  
>  enum cmdq_cb_status {
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index a74c1d5acdf3..83340211e1d3 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -152,6 +152,20 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
>   */
>  int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
>  		       u16 offset, u32 value, u32 mask);
> +
> +/**
> + * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
> + *		       to execute an instruction that set a constant value into
> + *		       internal register and use as value, mask or address in
> + *		       read/write instruction.
> + * @pkt:	the CMDQ packet
> + * @reg_idx:	the CMDQ internal register ID
> + * @value:	the specified value
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
> +
>  /**
>   * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
>   *                          packet and call back at the end of done packet

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek