[PATCH v1 0/8] Bug fixes and improved logging in MHI

[PATCH v1 0/8] Bug fixes and improved logging in MHI

[Bhaumik Bhatt]

A set of patches for bug fixes and improved logging in mhi/core/boot.c.
Verified on x86 and arm64 platforms.

Bhaumik Bhatt (5):
  bus: mhi: core: Handle firmware load using state worker
  bus: mhi: core: WARN_ON for malformed vector table
  bus: mhi: core: Return appropriate error codes for AMSS load failure
  bus: mhi: core: Improve debug logs for loading firmware
  bus: mhi: core: Ensure non-zero session or sequence ID values

Hemant Kumar (3):
  bus: mhi: core: Cache intmod from mhi event to mhi channel
  bus: mhi: core: Add range check for channel id received in event ring
  bus: mhi: core: Read transfer length from an event properly

 drivers/bus/mhi/core/boot.c     | 74 +++++++++++++++++++++++++----------------
 drivers/bus/mhi/core/init.c     |  5 ++-
 drivers/bus/mhi/core/internal.h |  1 +
 drivers/bus/mhi/core/main.c     | 15 ++++++---
 drivers/bus/mhi/core/pm.c       |  6 +---
 include/linux/mhi.h             |  2 --
 6 files changed, 62 insertions(+), 41 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 1/8] bus: mhi: core: Cache intmod from mhi event to mhi channel

[Bhaumik Bhatt]

From: Hemant Kumar <hemantk@codeaurora.org>

Driver is using zero initialized intmod value from mhi channel when
configuring TRE for bei field. This prevents interrupt moderation to
take effect in case it is supported by an event ring. Fix this by
copying intmod value from associated event ring to mhi channel upon
registering mhi controller.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 4 ++++
 drivers/bus/mhi/core/main.c | 9 ++++++---
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index b38359c..4dc7f22 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -864,6 +864,10 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
 		mutex_init(&mhi_chan->mutex);
 		init_completion(&mhi_chan->completion);
 		rwlock_init(&mhi_chan->lock);
+
+		/* used in setting bei field of TRE */
+		mhi_event = &mhi_cntrl->mhi_event[mhi_chan->er_index];
+		mhi_chan->intmod = mhi_event->intmod;
 	}
 
 	if (mhi_cntrl->bounce_buf) {
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index eb4256b..23154f1 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -929,7 +929,7 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
 	struct mhi_ring *buf_ring = &mhi_chan->buf_ring;
 	struct mhi_buf_info *buf_info;
 	struct mhi_tre *mhi_tre;
-	int ret;
+	int ret, bei;
 
 	/* If MHI host pre-allocates buffers then client drivers cannot queue */
 	if (mhi_chan->pre_alloc)
@@ -966,10 +966,11 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
 		goto map_error;
 
 	mhi_tre = tre_ring->wp;
+	bei = !!(mhi_chan->intmod);
 
 	mhi_tre->ptr = MHI_TRE_DATA_PTR(buf_info->p_addr);
 	mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(buf_info->len);
-	mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(1, 1, 0, 0);
+	mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(bei, 1, 0, 0);
 
 	/* increment WP */
 	mhi_add_ring_element(mhi_cntrl, tre_ring);
@@ -1006,6 +1007,7 @@ int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
 	struct mhi_ring *buf_ring = &mhi_chan->buf_ring;
 	struct mhi_buf_info *buf_info;
 	struct mhi_tre *mhi_tre;
+	int bei;
 
 	/* If MHI host pre-allocates buffers then client drivers cannot queue */
 	if (mhi_chan->pre_alloc)
@@ -1043,10 +1045,11 @@ int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
 	buf_info->len = len;
 
 	mhi_tre = tre_ring->wp;
+	bei = !!(mhi_chan->intmod);
 
 	mhi_tre->ptr = MHI_TRE_DATA_PTR(buf_info->p_addr);
 	mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(buf_info->len);
-	mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(1, 1, 0, 0);
+	mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(bei, 1, 0, 0);
 
 	/* increment WP */
 	mhi_add_ring_element(mhi_cntrl, tre_ring);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 2/8] bus: mhi: core: Add range check for channel id received in event ring

[Bhaumik Bhatt]

From: Hemant Kumar <hemantk@codeaurora.org>

MHI data completion handler function reads channel id from event
ring element. Value is under the control of MHI devices and can be
any value between 0 and 255. In order to prevent out of bound access
add a bound check against the max channel supported by controller
and skip processing of that event ring element.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 23154f1..ba8afa7 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -827,6 +827,9 @@ int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl,
 		enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp);
 
 		chan = MHI_TRE_GET_EV_CHID(local_rp);
+		if (WARN_ON(chan >= mhi_cntrl->max_chan))
+			continue;
+
 		mhi_chan = &mhi_cntrl->mhi_chan[chan];
 
 		if (likely(type == MHI_PKT_TYPE_TX_EVENT)) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 3/8] bus: mhi: core: Read transfer length from an event properly

[Bhaumik Bhatt]

From: Hemant Kumar <hemantk@codeaurora.org>

When MHI Driver receives an EOT event, it reads xfer_len from the
event in the last TRE. The value is under control of the MHI device
and never validated by Host MHI driver. The value should never be
larger than the real size of the buffer but a malicious device can
set the value 0xFFFF as maximum. This causes device to memory
overflow (both read or write). Fix this issue by reading minimum of
transfer length from event and the buffer length provided.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index ba8afa7..3802d3b 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -521,7 +521,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
 				mhi_cntrl->unmap_single(mhi_cntrl, buf_info);
 
 			result.buf_addr = buf_info->cb_buf;
-			result.bytes_xferd = xfer_len;
+			result.bytes_xferd =
+				min_t(u16, xfer_len, buf_info->len);
 			mhi_del_ring_element(mhi_cntrl, buf_ring);
 			mhi_del_ring_element(mhi_cntrl, tre_ring);
 			local_rp = tre_ring->rp;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 4/8] bus: mhi: core: Handle firmware load using state worker

[Bhaumik Bhatt]

Upon power up, driver queues firmware worker thread if the execution
environment is PBL. Firmware worker is blocked with a timeout until
state worker gets a chance to run and unblock firmware worker. An
endpoint power up failure can be seen if state worker gets a chance to
run after firmware worker has timed out. Remove this dependency and
handle firmware load directly using state worker thread.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c     | 18 +++---------------
 drivers/bus/mhi/core/init.c     |  1 -
 drivers/bus/mhi/core/internal.h |  1 +
 drivers/bus/mhi/core/pm.c       |  6 +-----
 include/linux/mhi.h             |  2 --
 5 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index ebad5eb..17c636b 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -377,30 +377,18 @@ static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
 	}
 }
 
-void mhi_fw_load_worker(struct work_struct *work)
+void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 {
-	struct mhi_controller *mhi_cntrl;
 	const struct firmware *firmware = NULL;
 	struct image_info *image_info;
-	struct device *dev;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	const char *fw_name;
 	void *buf;
 	dma_addr_t dma_addr;
 	size_t size;
 	int ret;
 
-	mhi_cntrl = container_of(work, struct mhi_controller, fw_worker);
-	dev = &mhi_cntrl->mhi_dev->dev;
-
-	dev_dbg(dev, "Waiting for device to enter PBL from: %s\n",
-		TO_MHI_EXEC_STR(mhi_cntrl->ee));
-
-	ret = wait_event_timeout(mhi_cntrl->state_event,
-				 MHI_IN_PBL(mhi_cntrl->ee) ||
-				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
-				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
-
-	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
 		dev_err(dev, "Device MHI is not in valid state\n");
 		return;
 	}
diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 4dc7f22..e92a20a 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -836,7 +836,6 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
 	spin_lock_init(&mhi_cntrl->wlock);
 	INIT_WORK(&mhi_cntrl->st_worker, mhi_pm_st_worker);
 	INIT_WORK(&mhi_cntrl->syserr_worker, mhi_pm_sys_err_worker);
-	INIT_WORK(&mhi_cntrl->fw_worker, mhi_fw_load_worker);
 	init_waitqueue_head(&mhi_cntrl->state_event);
 
 	mhi_cmd = mhi_cntrl->mhi_cmd;
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 5deadfa..4919a43 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -630,6 +630,7 @@ void mhi_ring_chan_db(struct mhi_controller *mhi_cntrl,
 void mhi_deinit_free_irq(struct mhi_controller *mhi_cntrl);
 void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
 		      struct image_info *img_info);
+void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl);
 int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
 			struct mhi_chan *mhi_chan);
 int mhi_init_chan_ctxt(struct mhi_controller *mhi_cntrl,
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 52690cb..dc90a71 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -528,7 +528,6 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
 	dev_dbg(dev, "Waiting for all pending threads to complete\n");
 	wake_up_all(&mhi_cntrl->state_event);
 	flush_work(&mhi_cntrl->st_worker);
-	flush_work(&mhi_cntrl->fw_worker);
 
 	dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
 	device_for_each_child(mhi_cntrl->cntrl_dev, NULL, mhi_destroy_device);
@@ -643,7 +642,7 @@ void mhi_pm_st_worker(struct work_struct *work)
 				mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
 			write_unlock_irq(&mhi_cntrl->pm_lock);
 			if (MHI_IN_PBL(mhi_cntrl->ee))
-				wake_up_all(&mhi_cntrl->state_event);
+				mhi_fw_load_handler(mhi_cntrl);
 			break;
 		case DEV_ST_TRANSITION_SBL:
 			write_lock_irq(&mhi_cntrl->pm_lock);
@@ -833,9 +832,6 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 	next_state = MHI_IN_PBL(current_ee) ?
 		DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
 
-	if (next_state == DEV_ST_TRANSITION_PBL)
-		schedule_work(&mhi_cntrl->fw_worker);
-
 	mhi_queue_state_transition(mhi_cntrl, next_state);
 
 	mutex_unlock(&mhi_cntrl->pm_mutex);
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index ad19960..cda7305 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -331,7 +331,6 @@ struct mhi_controller_config {
  * @wlock: Lock for protecting device wakeup
  * @mhi_link_info: Device bandwidth info
  * @st_worker: State transition worker
- * @fw_worker: Firmware download worker
  * @syserr_worker: System error worker
  * @state_event: State change event
  * @status_cb: CB function to notify power states of the device (required)
@@ -411,7 +410,6 @@ struct mhi_controller {
 	spinlock_t wlock;
 	struct mhi_link_info mhi_link_info;
 	struct work_struct st_worker;
-	struct work_struct fw_worker;
 	struct work_struct syserr_worker;
 	wait_queue_head_t state_event;
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 5/8] bus: mhi: core: WARN_ON for malformed vector table

[Bhaumik Bhatt]

Add a bounds check in the firmware copy routine to exit if a malformed
vector table is found while attempting to load the firmware in to the
BHIe vector table.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 17c636b..bc70edc 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -362,8 +362,14 @@ static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
 	int i = 0;
 	struct mhi_buf *mhi_buf = img_info->mhi_buf;
 	struct bhi_vec_entry *bhi_vec = img_info->bhi_vec;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 
 	while (remainder) {
+		if (WARN_ON(i >= img_info->entries)) {
+			dev_err(dev, "Malformed vector table\n");
+			return;
+		}
+
 		to_cpy = min(remainder, mhi_buf->len);
 		memcpy(mhi_buf->buf, buf, to_cpy);
 		bhi_vec->dma_addr = mhi_buf->dma_addr;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 6/8] bus: mhi: core: Return appropriate error codes for AMSS load failure

[Bhaumik Bhatt]

When loading AMSS firmware using BHIe protocol, return -ETIMEDOUT if no
response is received within the timeout or return -EIO in case of a
protocol returned failure or an MHI error state.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index bc70edc..4e49a0e 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -176,6 +176,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 	void __iomem *base = mhi_cntrl->bhie;
 	rwlock_t *pm_lock = &mhi_cntrl->pm_lock;
 	u32 tx_status, sequence_id;
+	int ret;
 
 	read_lock_bh(pm_lock);
 	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
@@ -198,19 +199,19 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 	read_unlock_bh(pm_lock);
 
 	/* Wait for the image download to complete */
-	wait_event_timeout(mhi_cntrl->state_event,
-			   MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
-			   mhi_read_reg_field(mhi_cntrl, base,
-					      BHIE_TXVECSTATUS_OFFS,
-					      BHIE_TXVECSTATUS_STATUS_BMSK,
-					      BHIE_TXVECSTATUS_STATUS_SHFT,
-					      &tx_status) || tx_status,
-			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
-
-	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
+				 mhi_read_reg_field(mhi_cntrl, base,
+						    BHIE_TXVECSTATUS_OFFS,
+						   BHIE_TXVECSTATUS_STATUS_BMSK,
+						   BHIE_TXVECSTATUS_STATUS_SHFT,
+						    &tx_status) || tx_status,
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
+	    tx_status != BHIE_TXVECSTATUS_STATUS_XFER_COMPL)
 		return -EIO;
 
-	return (tx_status == BHIE_TXVECSTATUS_STATUS_XFER_COMPL) ? 0 : -EIO;
+	return (!ret) ? -ETIMEDOUT : 0;
 }
 
 static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 7/8] bus: mhi: core: Improve debug logs for loading firmware

[Bhaumik Bhatt]

Add log messages to track boot flow errors and timeouts in SBL or AMSS
firmware loading to aid in debug.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 4e49a0e..0bc9c50 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -121,7 +121,8 @@ static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
 		ee = mhi_get_exec_env(mhi_cntrl);
 	}
 
-	dev_dbg(dev, "Waiting for image download completion, current EE: %s\n",
+	dev_dbg(dev,
+		"Waiting for RDDM image download via BHIe, current EE:%s\n",
 		TO_MHI_EXEC_STR(ee));
 
 	while (retry--) {
@@ -152,11 +153,14 @@ static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
 int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic)
 {
 	void __iomem *base = mhi_cntrl->bhie;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	u32 rx_status;
 
 	if (in_panic)
 		return __mhi_download_rddm_in_panic(mhi_cntrl);
 
+	dev_dbg(dev, "Waiting for RDDM image download via BHIe\n");
+
 	/* Wait for the image download to complete */
 	wait_event_timeout(mhi_cntrl->state_event,
 			   mhi_read_reg_field(mhi_cntrl, base,
@@ -174,6 +178,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 			    const struct mhi_buf *mhi_buf)
 {
 	void __iomem *base = mhi_cntrl->bhie;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	rwlock_t *pm_lock = &mhi_cntrl->pm_lock;
 	u32 tx_status, sequence_id;
 	int ret;
@@ -184,6 +189,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 		return -EIO;
 	}
 
+	dev_dbg(dev, "Starting AMSS download via BHIe\n");
 	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS,
 		      upper_32_bits(mhi_buf->dma_addr));
 
@@ -441,7 +447,12 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 		release_firmware(firmware);
 
 	/* Error or in EDL mode, we're done */
-	if (ret || mhi_cntrl->ee == MHI_EE_EDL)
+	if (ret) {
+		dev_err(dev, "MHI did not load SBL, ret:%d\n", ret);
+		return;
+	}
+
+	if (mhi_cntrl->ee == MHI_EE_EDL)
 		return;
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
@@ -469,8 +480,10 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	if (!mhi_cntrl->fbc_download)
 		return;
 
-	if (ret)
+	if (ret) {
+		dev_err(dev, "MHI did not enter READY state\n");
 		goto error_read;
+	}
 
 	/* Wait for the SBL event */
 	ret = wait_event_timeout(mhi_cntrl->state_event,
@@ -488,6 +501,8 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	ret = mhi_fw_load_amss(mhi_cntrl,
 			       /* Vector table is the last entry */
 			       &image_info->mhi_buf[image_info->entries - 1]);
+	if (ret)
+		dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret);
 
 	release_firmware(firmware);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 8/8] bus: mhi: core: Ensure non-zero session or sequence ID values

[Bhaumik Bhatt]

While writing any sequence or session identifiers, it is possible that
the host could write a zero value, whereas only non-zero values are
supported writes to those registers. Ensure that host does not write a
non-zero value for those cases.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 0bc9c50..c9971d4 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -199,6 +199,9 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECSIZE_OFFS, mhi_buf->len);
 
 	sequence_id = prandom_u32() & BHIE_TXVECSTATUS_SEQNUM_BMSK;
+	if (unlikely(!sequence_id))
+		sequence_id = 1;
+
 	mhi_write_reg_field(mhi_cntrl, base, BHIE_TXVECDB_OFFS,
 			    BHIE_TXVECDB_SEQNUM_BMSK, BHIE_TXVECDB_SEQNUM_SHFT,
 			    sequence_id);
@@ -254,6 +257,9 @@ static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
 		      lower_32_bits(dma_addr));
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGSIZE, size);
 	session_id = prandom_u32() & BHI_TXDB_SEQNUM_BMSK;
+	if (unlikely(!session_id))
+		session_id = 1;
+
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGTXDB, session_id);
 	read_unlock_bh(pm_lock);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[RESEND PATCH v1 0/8] Bug fixes and improved logging in MHI

[Bhaumik Bhatt]

A set of patches for bug fixes and improved logging in mhi/core/boot.c.
Verified on x86 and arm64 platforms.

Bhaumik Bhatt (5):
  bus: mhi: core: Handle firmware load using state worker
  bus: mhi: core: WARN_ON for malformed vector table
  bus: mhi: core: Return appropriate error codes for AMSS load failure
  bus: mhi: core: Improve debug logs for loading firmware
  bus: mhi: core: Ensure non-zero session or sequence ID values

Hemant Kumar (3):
  bus: mhi: core: Cache intmod from mhi event to mhi channel
  bus: mhi: core: Add range check for channel id received in event ring
  bus: mhi: core: Read transfer length from an event properly

 drivers/bus/mhi/core/boot.c     | 74 +++++++++++++++++++++++++----------------
 drivers/bus/mhi/core/init.c     |  5 ++-
 drivers/bus/mhi/core/internal.h |  1 +
 drivers/bus/mhi/core/main.c     | 17 +++++++---
 drivers/bus/mhi/core/pm.c       |  6 +---
 include/linux/mhi.h             |  2 --
 6 files changed, 64 insertions(+), 41 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v1 5/8] bus: mhi: core: WARN_ON for malformed vector table

[Bhaumik Bhatt]

Add a bounds check in the firmware copy routine to exit if a malformed
vector table is found while attempting to load the firmware in to the
BHIe vector table.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 17c636b..bc70edc 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -362,8 +362,14 @@ static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
 	int i = 0;
 	struct mhi_buf *mhi_buf = img_info->mhi_buf;
 	struct bhi_vec_entry *bhi_vec = img_info->bhi_vec;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 
 	while (remainder) {
+		if (WARN_ON(i >= img_info->entries)) {
+			dev_err(dev, "Malformed vector table\n");
+			return;
+		}
+
 		to_cpy = min(remainder, mhi_buf->len);
 		memcpy(mhi_buf->buf, buf, to_cpy);
 		bhi_vec->dma_addr = mhi_buf->dma_addr;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project