[PATCH v11 5/8] ARM: dts: Aspeed: AST2600: Update XDMA engine node

[Eddie James <eajames@linux.ibm.com>]

Add the PCI-E root complex reset, correct the pcie-device property, and
add the Aspeed SCU interrupt controller include.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1ffc1517..86a8e94 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -2,6 +2,7 @@
 // Copyright 2019 IBM Corp.
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
 #include <dt-bindings/clock/ast2600-clock.h>
 
 / {
@@ -342,10 +343,11 @@
 				compatible = "aspeed,ast2600-xdma";
 				reg = <0x1e6e7000 0x100>;
 				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
-				resets = <&syscon ASPEED_RESET_DEV_XDMA>;
+				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
+				reset-names = "device", "root-complex";
 				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-						      <&scu_ic0 2>;
-				pcie-device = "bmc";
+						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
 				aspeed,scu = <&syscon>;
 				status = "disabled";
 			};
-- 
1.8.3.1