All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	drinkcat@chromium.org, louis.kuo@mediatek.com,
	srv_heupstream@mediatek.com, linus.walleij@linaro.org,
	shengnan.wang@mediatek.com, tfiga@chromium.org,
	bgolaszewski@baylibre.com, sj.huang@mediatek.com,
	robh+dt@kernel.org, linux-mediatek@lists.infradead.org,
	sakari.ailus@linux.intel.com, matthias.bgg@gmail.com,
	bingbu.cao@intel.com, mchehab@kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org
Subject: Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
Date: Mon, 11 May 2020 20:06:35 +0800	[thread overview]
Message-ID: <1589198795.8804.276.camel@mhfsdcap03> (raw)
In-Reply-To: <20200511093308.GF185537@smile.fi.intel.com>

Hi Andy,

Thanks for the kindly review.

On Mon, 2020-05-11 at 12:33 +0300, Andy Shevchenko wrote:
> On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> > Add a V4L2 sub-device driver for OV02A10 image sensor.
> 
> ...
> 
> > +#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))
> 
> How often do you use this macro?
> 

Just once.
I would try to use the macro function directly in next release.

> ...
> 
> > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> > +			      unsigned char *val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_read_byte_data(client, reg);
> 
> > +
> 
> Extra blank line.
> 

Thanks for the carefully reminder.
This error can easily be neglected.
I would remove it in next release.

> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	*val = (unsigned char)ret;
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_pad_config *cfg)
> > +{
> > +	struct v4l2_subdev_format fmt = {
> 
> > +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
> > +			     : V4L2_SUBDEV_FORMAT_ACTIVE,
> 
> I think it would be fine to have it on one line.
> 

Got it.
Fixed in next release.

> > +		.format = {
> > +			.width = 1600,
> > +			.height = 1200,
> > +		}
> > +	};
> > +
> > +	ov02a10_set_fmt(sd, cfg, &fmt);
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +	if (!ret) {
> > +		if (rotation == 180) {
> 
> if (a) {
> 	if (b) {
> 		...
> 	}
> }
> 
> ==
> 
> if (a && b) {
> 	...
> }
> 

Thanks for the reminder :-)
Next release would use:
if (!ret && rotation == 180) {
	...
}

> > +			ov02a10->upside_down = true;
> > +			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> > +		}
> > +	}
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	drinkcat@chromium.org, louis.kuo@mediatek.com,
	srv_heupstream@mediatek.com, linus.walleij@linaro.org,
	shengnan.wang@mediatek.com, tfiga@chromium.org,
	bgolaszewski@baylibre.com, sj.huang@mediatek.com,
	robh+dt@kernel.org, linux-mediatek@lists.infradead.org,
	sakari.ailus@linux.intel.com, matthias.bgg@gmail.com,
	bingbu.cao@intel.com, mchehab@kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org
Subject: Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
Date: Mon, 11 May 2020 20:06:35 +0800	[thread overview]
Message-ID: <1589198795.8804.276.camel@mhfsdcap03> (raw)
In-Reply-To: <20200511093308.GF185537@smile.fi.intel.com>

Hi Andy,

Thanks for the kindly review.

On Mon, 2020-05-11 at 12:33 +0300, Andy Shevchenko wrote:
> On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> > Add a V4L2 sub-device driver for OV02A10 image sensor.
> 
> ...
> 
> > +#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))
> 
> How often do you use this macro?
> 

Just once.
I would try to use the macro function directly in next release.

> ...
> 
> > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> > +			      unsigned char *val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_read_byte_data(client, reg);
> 
> > +
> 
> Extra blank line.
> 

Thanks for the carefully reminder.
This error can easily be neglected.
I would remove it in next release.

> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	*val = (unsigned char)ret;
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_pad_config *cfg)
> > +{
> > +	struct v4l2_subdev_format fmt = {
> 
> > +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
> > +			     : V4L2_SUBDEV_FORMAT_ACTIVE,
> 
> I think it would be fine to have it on one line.
> 

Got it.
Fixed in next release.

> > +		.format = {
> > +			.width = 1600,
> > +			.height = 1200,
> > +		}
> > +	};
> > +
> > +	ov02a10_set_fmt(sd, cfg, &fmt);
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +	if (!ret) {
> > +		if (rotation == 180) {
> 
> if (a) {
> 	if (b) {
> 		...
> 	}
> }
> 
> ==
> 
> if (a && b) {
> 	...
> }
> 

Thanks for the reminder :-)
Next release would use:
if (!ret && rotation == 180) {
	...
}

> > +			ov02a10->upside_down = true;
> > +			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> > +		}
> > +	}
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
	<mchehab@kernel.org>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <sakari.ailus@linux.intel.com>,
	<drinkcat@chromium.org>, <tfiga@chromium.org>,
	<matthias.bgg@gmail.com>, <bingbu.cao@intel.com>,
	<srv_heupstream@mediatek.com>,
	<linux-mediatek@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>, <sj.huang@mediatek.com>,
	<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<louis.kuo@mediatek.com>, <shengnan.wang@mediatek.com>
Subject: Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
Date: Mon, 11 May 2020 20:06:35 +0800	[thread overview]
Message-ID: <1589198795.8804.276.camel@mhfsdcap03> (raw)
In-Reply-To: <20200511093308.GF185537@smile.fi.intel.com>

Hi Andy,

Thanks for the kindly review.

On Mon, 2020-05-11 at 12:33 +0300, Andy Shevchenko wrote:
> On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> > Add a V4L2 sub-device driver for OV02A10 image sensor.
> 
> ...
> 
> > +#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))
> 
> How often do you use this macro?
> 

Just once.
I would try to use the macro function directly in next release.

> ...
> 
> > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> > +			      unsigned char *val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_read_byte_data(client, reg);
> 
> > +
> 
> Extra blank line.
> 

Thanks for the carefully reminder.
This error can easily be neglected.
I would remove it in next release.

> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	*val = (unsigned char)ret;
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_pad_config *cfg)
> > +{
> > +	struct v4l2_subdev_format fmt = {
> 
> > +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
> > +			     : V4L2_SUBDEV_FORMAT_ACTIVE,
> 
> I think it would be fine to have it on one line.
> 

Got it.
Fixed in next release.

> > +		.format = {
> > +			.width = 1600,
> > +			.height = 1200,
> > +		}
> > +	};
> > +
> > +	ov02a10_set_fmt(sd, cfg, &fmt);
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +	if (!ret) {
> > +		if (rotation == 180) {
> 
> if (a) {
> 	if (b) {
> 		...
> 	}
> }
> 
> ==
> 
> if (a && b) {
> 	...
> }
> 

Thanks for the reminder :-)
Next release would use:
if (!ret && rotation == 180) {
	...
}

> > +			ov02a10->upside_down = true;
> > +			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> > +		}
> > +	}
> 


  reply	other threads:[~2020-05-11 12:08 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-09  8:06 [V8, 0/2] media: i2c: Add support for OV02A10 sensor Dongchun Zhu
2020-05-09  8:06 ` Dongchun Zhu
2020-05-09  8:06 ` Dongchun Zhu
2020-05-09  8:06 ` [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings Dongchun Zhu
2020-05-09  8:06   ` Dongchun Zhu
2020-05-09  8:06   ` Dongchun Zhu
2020-05-11 16:02   ` Rob Herring
2020-05-11 16:02     ` Rob Herring
2020-05-11 16:02     ` Rob Herring
2020-05-11 19:54     ` Sakari Ailus
2020-05-11 19:54       ` Sakari Ailus
2020-05-11 19:54       ` Sakari Ailus
2020-05-12  2:40     ` Dongchun Zhu
2020-05-12  2:40       ` Dongchun Zhu
2020-05-12  2:40       ` Dongchun Zhu
2020-05-21 18:59       ` Tomasz Figa
2020-05-21 18:59         ` Tomasz Figa
2020-05-21 18:59         ` Tomasz Figa
2020-05-24 20:33         ` Sakari Ailus
2020-05-24 20:33           ` Sakari Ailus
2020-05-24 20:33           ` Sakari Ailus
2020-05-21 19:35     ` Tomasz Figa
2020-05-21 19:35       ` Tomasz Figa
2020-05-21 19:35       ` Tomasz Figa
2020-05-22  9:44       ` Dongchun Zhu
2020-05-22  9:44         ` Dongchun Zhu
2020-05-22  9:44         ` Dongchun Zhu
2020-05-09  8:06 ` [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver Dongchun Zhu
2020-05-09  8:06   ` Dongchun Zhu
2020-05-09  8:06   ` Dongchun Zhu
2020-05-11  8:51   ` Sakari Ailus
2020-05-11  8:51     ` Sakari Ailus
2020-05-11  8:51     ` Sakari Ailus
2020-05-11 11:52     ` Dongchun Zhu
2020-05-11 11:52       ` Dongchun Zhu
2020-05-11 11:52       ` Dongchun Zhu
2020-05-11  9:33   ` Andy Shevchenko
2020-05-11  9:33     ` Andy Shevchenko
2020-05-11  9:33     ` Andy Shevchenko
2020-05-11 12:06     ` Dongchun Zhu [this message]
2020-05-11 12:06       ` Dongchun Zhu
2020-05-11 12:06       ` Dongchun Zhu
2020-05-21 19:32   ` Tomasz Figa
2020-05-21 19:32     ` Tomasz Figa
2020-05-21 19:32     ` Tomasz Figa
2020-05-23  4:50     ` Dongchun Zhu
2020-05-23  4:50       ` Dongchun Zhu
2020-05-23  4:50       ` Dongchun Zhu
2020-06-10 18:36       ` Tomasz Figa
2020-06-10 18:36         ` Tomasz Figa
2020-06-10 18:36         ` Tomasz Figa
2020-06-12  9:31         ` Dongchun Zhu
2020-06-12  9:31           ` Dongchun Zhu
2020-06-12  9:31           ` Dongchun Zhu
2020-06-12 18:49           ` Tomasz Figa
2020-06-12 18:49             ` Tomasz Figa
2020-06-12 18:49             ` Tomasz Figa
2020-06-15  7:24             ` Dongchun Zhu
2020-06-15  7:24               ` Dongchun Zhu
2020-06-15  7:24               ` Dongchun Zhu
2020-06-15  8:44               ` Andy Shevchenko
2020-06-15  8:44                 ` Andy Shevchenko
2020-06-15  8:44                 ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589198795.8804.276.camel@mhfsdcap03 \
    --to=dongchun.zhu@mediatek.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=bingbu.cao@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=louis.kuo@mediatek.com \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=shengnan.wang@mediatek.com \
    --cc=sj.huang@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.