[PATCH v3 6/7] bus: mhi: core: Read and save device hardware information from BHI

[Bhaumik Bhatt <bbhatt@codeaurora.org>]

Device hardware specific information such as serial number and the OEM
PK hash can be read using BHI and saved on host to identify the
endpoint.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c | 17 ++++++++++++++++-
 include/linux/mhi.h         |  6 ++++++
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 0b38014..24422f5 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -392,13 +392,28 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	void *buf;
 	dma_addr_t dma_addr;
 	size_t size;
-	int ret;
+	int i, ret;
 
 	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
 		dev_err(dev, "Device MHI is not in valid state\n");
 		return;
 	}
 
+	/* save hardware info from BHI */
+	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_SERIALNU,
+			   &mhi_cntrl->serial_number);
+	if (ret)
+		dev_err(dev, "Could not capture serial number via BHI\n");
+
+	for (i = 0; i < ARRAY_SIZE(mhi_cntrl->oem_pk_hash); i++) {
+		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_OEMPKHASH(i),
+				   &mhi_cntrl->oem_pk_hash[i]);
+		if (ret) {
+			dev_err(dev, "Could not capture OEM PK HASH via BHI\n");
+			break;
+		}
+	}
+
 	/* If device is in pass through, do reset to ready state transition */
 	if (mhi_cntrl->ee == MHI_EE_PTHRU)
 		goto fw_load_ee_pthru;
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index 026a624..42e4d1e 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -19,6 +19,8 @@
 #define MHI_VOTE_BUS BIT(0) /* do not disable the mhi bus */
 #define MHI_VOTE_DEVICE BIT(1) /* prevent mhi device from entering lpm */
 
+#define MHI_MAX_OEM_PK_HASH_SEGMENTS 16
+
 struct mhi_chan;
 struct mhi_event;
 struct mhi_ctxt;
@@ -318,6 +320,8 @@ struct mhi_controller_config {
  * @device_number: MHI controller device number
  * @major_version: MHI controller major revision number
  * @minor_version: MHI controller minor revision number
+ * @serial_number: MHI controller serial number obtained from BHI
+ * @oem_pk_hash: MHI controller OEM PK Hash obtained from BHI
  * @mhi_event: MHI event ring configurations table
  * @mhi_cmd: MHI command ring configurations table
  * @mhi_ctxt: MHI device context, shared memory between host and device
@@ -397,6 +401,8 @@ struct mhi_controller {
 	u32 device_number;
 	u32 major_version;
 	u32 minor_version;
+	u32 serial_number;
+	u32 oem_pk_hash[MHI_MAX_OEM_PK_HASH_SEGMENTS];
 
 	struct mhi_event *mhi_event;
 	struct mhi_cmd *mhi_cmd;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project