From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
sivaprak@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH V7 4/4] clk: qcom: Add ipq6018 apss clock controller
Date: Sat, 6 Jun 2020 16:25:07 +0530 [thread overview]
Message-ID: <1591440907-20021-5-git-send-email-sivaprak@codeaurora.org> (raw)
In-Reply-To: <1591440907-20021-1-git-send-email-sivaprak@codeaurora.org>
The CPU on Qualcomm ipq6018 devices are clocked primarily by a aplha PLL
and xo which are connected to a mux and enable block.
Add support for the mux and enable block which feeds the CPU on ipq6018
devices.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 11 +++++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/apss-ipq6018.c | 106 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 118 insertions(+)
create mode 100644 drivers/clk/qcom/apss-ipq6018.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index ee668eb..080f447 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -97,6 +97,17 @@ config IPQ_APSS_PLL
Say Y if you want to support CPU frequency scaling on ipq based
devices.
+config IPQ_APSS_6018
+ tristate "IPQ APSS Clock Controller"
+ select IPQ_APSS_PLL
+ depends on QCOM_APCS_IPC || COMPILE_TEST
+ help
+ Support for APSS clock controller on IPQ platforms. The
+ APSS clock controller manages the Mux and enable block that feeds the
+ CPUs.
+ Say Y if you want to support CPU frequency scaling on
+ ipq based devices.
+
config IPQ_GCC_4019
tristate "IPQ4019 Global Clock Controller"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index b4a6ba1..3accea1 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -20,6 +20,7 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
+obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c
new file mode 100644
index 0000000..004f7e1
--- /dev/null
+++ b/drivers/clk/qcom/apss-ipq6018.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/module.h>
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "clk-alpha-pll.h"
+#include "clk-regmap-mux.h"
+
+enum {
+ P_XO,
+ P_APSS_PLL_EARLY,
+};
+
+static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
+ { .fw_name = "xo" },
+ { .fw_name = "pll" },
+};
+
+static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
+ { P_XO, 0 },
+ { P_APSS_PLL_EARLY, 5 },
+};
+
+static struct clk_regmap_mux apcs_alias0_clk_src = {
+ .reg = 0x0050,
+ .width = 3,
+ .shift = 7,
+ .parent_map = parents_apcs_alias0_clk_src_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "apcs_alias0_clk_src",
+ .parent_data = parents_apcs_alias0_clk_src,
+ .num_parents = 2,
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_branch apcs_alias0_core_clk = {
+ .halt_reg = 0x0058,
+ .clkr = {
+ .enable_reg = 0x0058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "apcs_alias0_core_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &apcs_alias0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static const struct regmap_config apss_ipq6018_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x1000,
+ .fast_io = true,
+};
+
+static struct clk_regmap *apss_ipq6018_clks[] = {
+ [APCS_ALIAS0_CLK_SRC] = &apcs_alias0_clk_src.clkr,
+ [APCS_ALIAS0_CORE_CLK] = &apcs_alias0_core_clk.clkr,
+};
+
+static const struct qcom_cc_desc apss_ipq6018_desc = {
+ .config = &apss_ipq6018_regmap_config,
+ .clks = apss_ipq6018_clks,
+ .num_clks = ARRAY_SIZE(apss_ipq6018_clks),
+};
+
+static int apss_ipq6018_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return qcom_cc_really_probe(pdev, &apss_ipq6018_desc, regmap);
+}
+
+static struct platform_driver apss_ipq6018_driver = {
+ .probe = apss_ipq6018_probe,
+ .driver = {
+ .name = "qcom,apss-ipq6018-clk",
+ },
+};
+
+module_platform_driver(apss_ipq6018_driver);
+
+MODULE_DESCRIPTION("QCOM APSS IPQ 6018 CLK Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
next prev parent reply other threads:[~2020-06-06 10:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-06 10:55 [PATCH V7 0/4] Add APSS clock controller support for IPQ6018 Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible Sivaprakash Murugesan
2020-06-15 17:59 ` Rob Herring
2020-06-20 0:36 ` Stephen Boyd
2020-06-20 1:06 ` Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 2/4] clk: qcom: Add ipq apss pll driver Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller Sivaprakash Murugesan
2020-06-09 19:47 ` Rob Herring
2020-06-20 2:26 ` Stephen Boyd
2020-06-06 10:55 ` Sivaprakash Murugesan [this message]
2020-06-18 7:00 ` [PATCH V7 0/4] Add APSS clock controller support for IPQ6018 Sivaprakash Murugesan
2020-06-20 0:31 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1591440907-20021-5-git-send-email-sivaprak@codeaurora.org \
--to=sivaprak@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.