All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krishna Manikandan <mkrishn@codeaurora.org>
To: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: Kalyan Thota <kalyan_t@codeaurora.org>,
	linux-kernel@vger.kernel.org, robdclark@gmail.com,
	seanpaul@chromium.org, hoegsberg@chromium.org,
	nganji@codeaurora.org, mka@chromium.org, john.stultz@linaro.org,
	dianders@chromium.org, abhinavk@codeaurora.org,
	mkrishn@codeaurora.org
Subject: [v2] drm/msm/dpu: request for display color blocks based on hw catalog entry
Date: Fri, 12 Jun 2020 11:52:37 +0530	[thread overview]
Message-ID: <1591942957-18410-1-git-send-email-mkrishn@codeaurora.org> (raw)

From: Kalyan Thota <kalyan_t@codeaurora.org>

Request for color processing blocks only if they are
available in the display hw catalog and they are
sufficient in number for the selection.

Changes in v2:
	- Include Fixes tag in commit message (Rob Clark)
	- Adding the Tested by tag as there are no code
	  changes in v2

Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 63976dc..9f8de77 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -521,7 +521,7 @@ static struct msm_display_topology dpu_encoder_get_topology(
 			struct dpu_kms *dpu_kms,
 			struct drm_display_mode *mode)
 {
-	struct msm_display_topology topology;
+	struct msm_display_topology topology = {0};
 	int i, intf_count = 0;
 
 	for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
@@ -537,7 +537,8 @@ static struct msm_display_topology dpu_encoder_get_topology(
 	 * 1 LM, 1 INTF
 	 * 2 LM, 1 INTF (stream merge to support high resolution interfaces)
 	 *
-	 * Adding color blocks only to primary interface
+	 * Adding color blocks only to primary interface if available in
+	 * sufficient number
 	 */
 	if (intf_count == 2)
 		topology.num_lm = 2;
@@ -546,8 +547,11 @@ static struct msm_display_topology dpu_encoder_get_topology(
 	else
 		topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1;
 
-	if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI)
-		topology.num_dspp = topology.num_lm;
+	if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI) {
+		if (dpu_kms->catalog->dspp &&
+			(dpu_kms->catalog->dspp_count >= topology.num_lm))
+			topology.num_dspp = topology.num_lm;
+	}
 
 	topology.num_enc = 0;
 	topology.num_intf = intf_count;
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Krishna Manikandan <mkrishn@codeaurora.org>
To: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: mkrishn@codeaurora.org, linux-kernel@vger.kernel.org,
	abhinavk@codeaurora.org, dianders@chromium.org,
	seanpaul@chromium.org, Kalyan Thota <kalyan_t@codeaurora.org>,
	hoegsberg@chromium.org, mka@chromium.org
Subject: [v2] drm/msm/dpu: request for display color blocks based on hw catalog entry
Date: Fri, 12 Jun 2020 11:52:37 +0530	[thread overview]
Message-ID: <1591942957-18410-1-git-send-email-mkrishn@codeaurora.org> (raw)

From: Kalyan Thota <kalyan_t@codeaurora.org>

Request for color processing blocks only if they are
available in the display hw catalog and they are
sufficient in number for the selection.

Changes in v2:
	- Include Fixes tag in commit message (Rob Clark)
	- Adding the Tested by tag as there are no code
	  changes in v2

Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 63976dc..9f8de77 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -521,7 +521,7 @@ static struct msm_display_topology dpu_encoder_get_topology(
 			struct dpu_kms *dpu_kms,
 			struct drm_display_mode *mode)
 {
-	struct msm_display_topology topology;
+	struct msm_display_topology topology = {0};
 	int i, intf_count = 0;
 
 	for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
@@ -537,7 +537,8 @@ static struct msm_display_topology dpu_encoder_get_topology(
 	 * 1 LM, 1 INTF
 	 * 2 LM, 1 INTF (stream merge to support high resolution interfaces)
 	 *
-	 * Adding color blocks only to primary interface
+	 * Adding color blocks only to primary interface if available in
+	 * sufficient number
 	 */
 	if (intf_count == 2)
 		topology.num_lm = 2;
@@ -546,8 +547,11 @@ static struct msm_display_topology dpu_encoder_get_topology(
 	else
 		topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1;
 
-	if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI)
-		topology.num_dspp = topology.num_lm;
+	if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI) {
+		if (dpu_kms->catalog->dspp &&
+			(dpu_kms->catalog->dspp_count >= topology.num_lm))
+			topology.num_dspp = topology.num_lm;
+	}
 
 	topology.num_enc = 0;
 	topology.num_intf = intf_count;
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2020-06-12  6:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-12  6:22 Krishna Manikandan [this message]
2020-06-12  6:22 ` [v2] drm/msm/dpu: request for display color blocks based on hw catalog entry Krishna Manikandan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1591942957-18410-1-git-send-email-mkrishn@codeaurora.org \
    --to=mkrishn@codeaurora.org \
    --cc=abhinavk@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=hoegsberg@chromium.org \
    --cc=john.stultz@linaro.org \
    --cc=kalyan_t@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=nganji@codeaurora.org \
    --cc=robdclark@gmail.com \
    --cc=seanpaul@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.