From: Kalle Valo <kvalo@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 01/12] ath11k: ahb: call ath11k_core_init() before irq configuration
Date: Tue, 16 Jun 2020 17:00:44 +0300 [thread overview]
Message-ID: <1592316055-24958-2-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1592316055-24958-1-git-send-email-kvalo@codeaurora.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
This is needed to init .max_radios in hw_params and onfigure external
interrupts for available pdev_ids.
Compile tested only.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/ahb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 30092841ac46..2ea6da7682ce 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -951,15 +951,15 @@ static int ath11k_ahb_probe(struct platform_device *pdev)
ath11k_ahb_init_qmi_ce_config(ab);
- ret = ath11k_ahb_config_irq(ab);
+ ret = ath11k_core_init(ab);
if (ret) {
- ath11k_err(ab, "failed to configure irq: %d\n", ret);
+ ath11k_err(ab, "failed to init core: %d\n", ret);
goto err_ce_free;
}
- ret = ath11k_core_init(ab);
+ ret = ath11k_ahb_config_irq(ab);
if (ret) {
- ath11k_err(ab, "failed to init core: %d\n", ret);
+ ath11k_err(ab, "failed to configure irq: %d\n", ret);
goto err_ce_free;
}
--
2.7.4
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 01/12] ath11k: ahb: call ath11k_core_init() before irq configuration
Date: Tue, 16 Jun 2020 17:00:44 +0300 [thread overview]
Message-ID: <1592316055-24958-2-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1592316055-24958-1-git-send-email-kvalo@codeaurora.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
This is needed to init .max_radios in hw_params and onfigure external
interrupts for available pdev_ids.
Compile tested only.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/ahb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 30092841ac46..2ea6da7682ce 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -951,15 +951,15 @@ static int ath11k_ahb_probe(struct platform_device *pdev)
ath11k_ahb_init_qmi_ce_config(ab);
- ret = ath11k_ahb_config_irq(ab);
+ ret = ath11k_core_init(ab);
if (ret) {
- ath11k_err(ab, "failed to configure irq: %d\n", ret);
+ ath11k_err(ab, "failed to init core: %d\n", ret);
goto err_ce_free;
}
- ret = ath11k_core_init(ab);
+ ret = ath11k_ahb_config_irq(ab);
if (ret) {
- ath11k_err(ab, "failed to init core: %d\n", ret);
+ ath11k_err(ab, "failed to configure irq: %d\n", ret);
goto err_ce_free;
}
--
2.7.4
next prev parent reply other threads:[~2020-06-16 14:01 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 14:00 [PATCH 00/12] preparation for IPQ6018 support Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` Kalle Valo [this message]
2020-06-16 14:00 ` [PATCH 01/12] ath11k: ahb: call ath11k_core_init() before irq configuration Kalle Valo
2020-06-23 7:53 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 02/12] ath11k: convert ath11k_hw_params to an array Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 03/12] ath11k: define max_radios in hw_params Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 04/12] ath11k: add hw_ops for pdev id to hw_mac mapping Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 05/12] ath11k: Add bdf-addr in hw_params Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 06/12] ath11k: create a common function to request all firmware files Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 07/12] ath11k: don't use defines for hw specific firmware directories Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 08/12] ath11k: change ath11k_core_fetch_board_data_api_n() to use ath11k_core_create_firmware_path() Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 09/12] ath11k: remove useless info messages Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 10/12] ath11k: qmi: cleanup " Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 11/12] ath11k: don't use defines in hw_params Kalle Valo
2020-06-16 14:00 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 12/12] ath11k: remove define ATH11K_QMI_DEFAULT_CAL_FILE_NAME Kalle Valo
2020-06-16 14:00 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592316055-24958-2-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.