From: Hanks Chen <hanks.chen@mediatek.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
mtk01761 <wendell.lin@mediatek.com>,
YueHaibing <yuehaibing@huawei.com>,
Andy Teng <andy.teng@mediatek.com>, <linux-gpio@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
CC Hwang <cc.hwang@mediatek.com>,
Loda Chou <loda.chou@mediatek.com>
Subject: Re: [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
Date: Wed, 5 Aug 2020 10:24:09 +0800 [thread overview]
Message-ID: <1596594249.11014.1.camel@mtkswgap22> (raw)
In-Reply-To: <1596115816-11758-3-git-send-email-hanks.chen@mediatek.com>
Hi Matthias and all,
Gentle ping on this patch.
Thanks
Hanks Chen
On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
> this adds initial MT6779 dts settings for board support,
> including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.
>
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt6779-evb.dts | 31 +++
> arch/arm64/boot/dts/mediatek/mt6779.dtsi | 271 ++++++++++++++++++++
> 3 files changed, 303 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index a57af9da9f5c..4d1b0f9d8d1c 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> new file mode 100644
> index 000000000000..164f5cbb3821
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt6779.dtsi"
> +
> +/ {
> + model = "MediaTek MT6779 EVB";
> + compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x1e800000>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> new file mode 100644
> index 000000000000..370f309d32de
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/mt6779-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
> +
> +/ {
> + compatible = "mediatek,mt6779";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x000>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x100>;
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x200>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x300>;
> + };
> +
> + cpu4: cpu@4 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x400>;
> + };
> +
> + cpu5: cpu@5 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x500>;
> + };
> +
> + cpu6: cpu@6 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a75";
> + enable-method = "psci";
> + reg = <0x600>;
> + };
> +
> + cpu7: cpu@7 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a75";
> + enable-method = "psci";
> + reg = <0x700>;
> + };
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
> + };
> +
> + clk26m: oscillator@0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + clk32k: oscillator@1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller@0c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>, /* GICD */
> + <0 0x0c040000 0 0x200000>; /* GICR */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> + ppi-partitions {
> + ppi_cluster0: interrupt-partition-0 {
> + affinity = <&cpu0 &cpu1 \
> + &cpu2 &cpu3 &cpu4 &cpu5>;
> + };
> + ppi_cluster1: interrupt-partition-1 {
> + affinity = <&cpu6 &cpu7>;
> + };
> + };
> +
> + };
> +
> + sysirq: intpol-controller@0c53a650 {
> + compatible = "mediatek,mt6779-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x0c53a650 0 0x50>;
> + };
> +
> + topckgen: clock-controller@10000000 {
> + compatible = "mediatek,mt6779-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg_ao: clock-controller@10001000 {
> + compatible = "mediatek,mt6779-infracfg_ao", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pio: pinctrl@10005000 {
> + compatible = "mediatek,mt6779-pinctrl", "syscon";
> + reg = <0 0x10005000 0 0x1000>,
> + <0 0x11c20000 0 0x1000>,
> + <0 0x11d10000 0 0x1000>,
> + <0 0x11e20000 0 0x1000>,
> + <0 0x11e70000 0 0x1000>,
> + <0 0x11ea0000 0 0x1000>,
> + <0 0x11f20000 0 0x1000>,
> + <0 0x11f30000 0 0x1000>,
> + <0 0x1000b000 0 0x1000>;
> + reg-names = "gpio", "iocfg_rm",
> + "iocfg_br", "iocfg_lm",
> + "iocfg_lb", "iocfg_rt",
> + "iocfg_lt", "iocfg_tl",
> + "eint";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pio 0 0 210>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + apmixed: clock-controller@1000c000 {
> + compatible = "mediatek,mt6779-apmixed", "syscon";
> + reg = <0 0x1000c000 0 0xe00>;
> + #clock-cells = <1>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + audio: clock-controller@11210000 {
> + compatible = "mediatek,mt6779-audio", "syscon";
> + reg = <0 0x11210000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mfgcfg: clock-controller@13fbf000 {
> + compatible = "mediatek,mt6779-mfgcfg", "syscon";
> + reg = <0 0x13fbf000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt6779-mmsys", "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + imgsys: clock-controller@15020000 {
> + compatible = "mediatek,mt6779-imgsys", "syscon";
> + reg = <0 0x15020000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: clock-controller@16000000 {
> + compatible = "mediatek,mt6779-vdecsys", "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vencsys: clock-controller@17000000 {
> + compatible = "mediatek,mt6779-vencsys", "syscon";
> + reg = <0 0x17000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + camsys: clock-controller@1a000000 {
> + compatible = "mediatek,mt6779-camsys", "syscon";
> + reg = <0 0x1a000000 0 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + ipesys: clock-controller@1b000000 {
> + compatible = "mediatek,mt6779-ipesys", "syscon";
> + reg = <0 0x1b000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + };
> +};
WARNING: multiple messages have this Message-ID (diff)
From: Hanks Chen <hanks.chen@mediatek.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: devicetree@vger.kernel.org, CC Hwang <cc.hwang@mediatek.com>,
Stephen Boyd <sboyd@kernel.org>,
Andy Teng <andy.teng@mediatek.com>,
Michael Turquette <mturquette@baylibre.com>,
YueHaibing <yuehaibing@huawei.com>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Loda Chou <loda.chou@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
mtk01761 <wendell.lin@mediatek.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
Date: Wed, 5 Aug 2020 10:24:09 +0800 [thread overview]
Message-ID: <1596594249.11014.1.camel@mtkswgap22> (raw)
In-Reply-To: <1596115816-11758-3-git-send-email-hanks.chen@mediatek.com>
Hi Matthias and all,
Gentle ping on this patch.
Thanks
Hanks Chen
On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
> this adds initial MT6779 dts settings for board support,
> including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.
>
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt6779-evb.dts | 31 +++
> arch/arm64/boot/dts/mediatek/mt6779.dtsi | 271 ++++++++++++++++++++
> 3 files changed, 303 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index a57af9da9f5c..4d1b0f9d8d1c 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> new file mode 100644
> index 000000000000..164f5cbb3821
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt6779.dtsi"
> +
> +/ {
> + model = "MediaTek MT6779 EVB";
> + compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x1e800000>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> new file mode 100644
> index 000000000000..370f309d32de
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/mt6779-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
> +
> +/ {
> + compatible = "mediatek,mt6779";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x000>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x100>;
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x200>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x300>;
> + };
> +
> + cpu4: cpu@4 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x400>;
> + };
> +
> + cpu5: cpu@5 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x500>;
> + };
> +
> + cpu6: cpu@6 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a75";
> + enable-method = "psci";
> + reg = <0x600>;
> + };
> +
> + cpu7: cpu@7 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a75";
> + enable-method = "psci";
> + reg = <0x700>;
> + };
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
> + };
> +
> + clk26m: oscillator@0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + clk32k: oscillator@1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller@0c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>, /* GICD */
> + <0 0x0c040000 0 0x200000>; /* GICR */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> + ppi-partitions {
> + ppi_cluster0: interrupt-partition-0 {
> + affinity = <&cpu0 &cpu1 \
> + &cpu2 &cpu3 &cpu4 &cpu5>;
> + };
> + ppi_cluster1: interrupt-partition-1 {
> + affinity = <&cpu6 &cpu7>;
> + };
> + };
> +
> + };
> +
> + sysirq: intpol-controller@0c53a650 {
> + compatible = "mediatek,mt6779-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x0c53a650 0 0x50>;
> + };
> +
> + topckgen: clock-controller@10000000 {
> + compatible = "mediatek,mt6779-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg_ao: clock-controller@10001000 {
> + compatible = "mediatek,mt6779-infracfg_ao", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pio: pinctrl@10005000 {
> + compatible = "mediatek,mt6779-pinctrl", "syscon";
> + reg = <0 0x10005000 0 0x1000>,
> + <0 0x11c20000 0 0x1000>,
> + <0 0x11d10000 0 0x1000>,
> + <0 0x11e20000 0 0x1000>,
> + <0 0x11e70000 0 0x1000>,
> + <0 0x11ea0000 0 0x1000>,
> + <0 0x11f20000 0 0x1000>,
> + <0 0x11f30000 0 0x1000>,
> + <0 0x1000b000 0 0x1000>;
> + reg-names = "gpio", "iocfg_rm",
> + "iocfg_br", "iocfg_lm",
> + "iocfg_lb", "iocfg_rt",
> + "iocfg_lt", "iocfg_tl",
> + "eint";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pio 0 0 210>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + apmixed: clock-controller@1000c000 {
> + compatible = "mediatek,mt6779-apmixed", "syscon";
> + reg = <0 0x1000c000 0 0xe00>;
> + #clock-cells = <1>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + audio: clock-controller@11210000 {
> + compatible = "mediatek,mt6779-audio", "syscon";
> + reg = <0 0x11210000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mfgcfg: clock-controller@13fbf000 {
> + compatible = "mediatek,mt6779-mfgcfg", "syscon";
> + reg = <0 0x13fbf000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt6779-mmsys", "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + imgsys: clock-controller@15020000 {
> + compatible = "mediatek,mt6779-imgsys", "syscon";
> + reg = <0 0x15020000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: clock-controller@16000000 {
> + compatible = "mediatek,mt6779-vdecsys", "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vencsys: clock-controller@17000000 {
> + compatible = "mediatek,mt6779-vencsys", "syscon";
> + reg = <0 0x17000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + camsys: clock-controller@1a000000 {
> + compatible = "mediatek,mt6779-camsys", "syscon";
> + reg = <0 0x1a000000 0 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + ipesys: clock-controller@1b000000 {
> + compatible = "mediatek,mt6779-ipesys", "syscon";
> + reg = <0 0x1b000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + };
> +};
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Hanks Chen <hanks.chen@mediatek.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: devicetree@vger.kernel.org, CC Hwang <cc.hwang@mediatek.com>,
Stephen Boyd <sboyd@kernel.org>,
Andy Teng <andy.teng@mediatek.com>,
Michael Turquette <mturquette@baylibre.com>,
YueHaibing <yuehaibing@huawei.com>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Loda Chou <loda.chou@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
mtk01761 <wendell.lin@mediatek.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
Date: Wed, 5 Aug 2020 10:24:09 +0800 [thread overview]
Message-ID: <1596594249.11014.1.camel@mtkswgap22> (raw)
In-Reply-To: <1596115816-11758-3-git-send-email-hanks.chen@mediatek.com>
Hi Matthias and all,
Gentle ping on this patch.
Thanks
Hanks Chen
On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
> this adds initial MT6779 dts settings for board support,
> including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.
>
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt6779-evb.dts | 31 +++
> arch/arm64/boot/dts/mediatek/mt6779.dtsi | 271 ++++++++++++++++++++
> 3 files changed, 303 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index a57af9da9f5c..4d1b0f9d8d1c 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> new file mode 100644
> index 000000000000..164f5cbb3821
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt6779.dtsi"
> +
> +/ {
> + model = "MediaTek MT6779 EVB";
> + compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x1e800000>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> new file mode 100644
> index 000000000000..370f309d32de
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/mt6779-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
> +
> +/ {
> + compatible = "mediatek,mt6779";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x000>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x100>;
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x200>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x300>;
> + };
> +
> + cpu4: cpu@4 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x400>;
> + };
> +
> + cpu5: cpu@5 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + enable-method = "psci";
> + reg = <0x500>;
> + };
> +
> + cpu6: cpu@6 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a75";
> + enable-method = "psci";
> + reg = <0x600>;
> + };
> +
> + cpu7: cpu@7 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a75";
> + enable-method = "psci";
> + reg = <0x700>;
> + };
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
> + };
> +
> + clk26m: oscillator@0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + clk32k: oscillator@1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller@0c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>, /* GICD */
> + <0 0x0c040000 0 0x200000>; /* GICR */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> + ppi-partitions {
> + ppi_cluster0: interrupt-partition-0 {
> + affinity = <&cpu0 &cpu1 \
> + &cpu2 &cpu3 &cpu4 &cpu5>;
> + };
> + ppi_cluster1: interrupt-partition-1 {
> + affinity = <&cpu6 &cpu7>;
> + };
> + };
> +
> + };
> +
> + sysirq: intpol-controller@0c53a650 {
> + compatible = "mediatek,mt6779-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x0c53a650 0 0x50>;
> + };
> +
> + topckgen: clock-controller@10000000 {
> + compatible = "mediatek,mt6779-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg_ao: clock-controller@10001000 {
> + compatible = "mediatek,mt6779-infracfg_ao", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pio: pinctrl@10005000 {
> + compatible = "mediatek,mt6779-pinctrl", "syscon";
> + reg = <0 0x10005000 0 0x1000>,
> + <0 0x11c20000 0 0x1000>,
> + <0 0x11d10000 0 0x1000>,
> + <0 0x11e20000 0 0x1000>,
> + <0 0x11e70000 0 0x1000>,
> + <0 0x11ea0000 0 0x1000>,
> + <0 0x11f20000 0 0x1000>,
> + <0 0x11f30000 0 0x1000>,
> + <0 0x1000b000 0 0x1000>;
> + reg-names = "gpio", "iocfg_rm",
> + "iocfg_br", "iocfg_lm",
> + "iocfg_lb", "iocfg_rt",
> + "iocfg_lt", "iocfg_tl",
> + "eint";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pio 0 0 210>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + apmixed: clock-controller@1000c000 {
> + compatible = "mediatek,mt6779-apmixed", "syscon";
> + reg = <0 0x1000c000 0 0xe00>;
> + #clock-cells = <1>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt6779-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + audio: clock-controller@11210000 {
> + compatible = "mediatek,mt6779-audio", "syscon";
> + reg = <0 0x11210000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mfgcfg: clock-controller@13fbf000 {
> + compatible = "mediatek,mt6779-mfgcfg", "syscon";
> + reg = <0 0x13fbf000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt6779-mmsys", "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + imgsys: clock-controller@15020000 {
> + compatible = "mediatek,mt6779-imgsys", "syscon";
> + reg = <0 0x15020000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: clock-controller@16000000 {
> + compatible = "mediatek,mt6779-vdecsys", "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vencsys: clock-controller@17000000 {
> + compatible = "mediatek,mt6779-vencsys", "syscon";
> + reg = <0 0x17000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + camsys: clock-controller@1a000000 {
> + compatible = "mediatek,mt6779-camsys", "syscon";
> + reg = <0 0x1a000000 0 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + ipesys: clock-controller@1b000000 {
> + compatible = "mediatek,mt6779-ipesys", "syscon";
> + reg = <0 0x1b000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + };
> +};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-08-05 2:24 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-30 13:30 [PATCH v10 0/3] Add basic SoC Support for Mediatek MT6779 SoC Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-07-31 18:26 ` Rob Herring
2020-07-31 18:26 ` Rob Herring
2020-07-31 18:26 ` Rob Herring
2020-08-03 23:31 ` Linus Walleij
2020-08-03 23:31 ` Linus Walleij
2020-08-03 23:31 ` Linus Walleij
2020-07-30 13:30 ` [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779 Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-08-05 2:24 ` Hanks Chen [this message]
2020-08-05 2:24 ` Hanks Chen
2020-08-05 2:24 ` Hanks Chen
2020-08-27 8:20 ` Matthias Brugger
2020-08-27 8:20 ` Matthias Brugger
2020-08-27 8:20 ` Matthias Brugger
2020-10-09 12:30 ` Matthias Brugger
2020-10-09 12:30 ` Matthias Brugger
2020-10-09 12:30 ` Matthias Brugger
2020-07-30 13:30 ` [PATCH v10 3/3] clk: mediatek: add UART0 clock support Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-07-30 13:30 ` Hanks Chen
2020-09-08 6:25 ` Hanks Chen
2020-09-08 6:25 ` Hanks Chen
2020-09-08 6:25 ` Hanks Chen
2020-10-03 10:06 ` Hanks Chen
2020-10-03 10:06 ` Hanks Chen
2020-10-03 10:06 ` Hanks Chen
2020-10-08 2:00 ` Stephen Boyd
2020-10-08 2:00 ` Stephen Boyd
2020-10-08 2:00 ` Stephen Boyd
2020-10-08 2:39 ` Hanks Chen
2020-10-08 2:39 ` Hanks Chen
2020-10-08 2:39 ` Hanks Chen
2020-10-08 21:45 ` Stephen Boyd
2020-10-08 21:45 ` Stephen Boyd
2020-10-08 21:45 ` Stephen Boyd
2020-10-08 7:25 ` Matthias Brugger
2020-10-08 7:25 ` Matthias Brugger
2020-10-08 7:25 ` Matthias Brugger
2020-10-08 21:45 ` Stephen Boyd
2020-10-08 21:45 ` Stephen Boyd
2020-10-08 21:45 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1596594249.11014.1.camel@mtkswgap22 \
--to=hanks.chen@mediatek.com \
--cc=andy.teng@mediatek.com \
--cc=cc.hwang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=loda.chou@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=wendell.lin@mediatek.com \
--cc=yuehaibing@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.