FAILED: patch "[PATCH] pinctrl: ingenic: Properly detect GPIO direction when" failed to apply to 5.4-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 84e7a946da71f678affacea301f6d5cb4d9784e8 Mon Sep 17 00:00:00 2001
From: Paul Cercueil <paul@crapouillou.net>
Date: Mon, 22 Jun 2020 23:45:48 +0200
Subject: [PATCH] pinctrl: ingenic: Properly detect GPIO direction when
 configured for IRQ
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The PAT1 register contains information about the IRQ type (edge/level)
for input GPIOs with IRQ enabled, and the direction for non-IRQ GPIOs.
So it makes sense to read it only if the GPIO has no interrupt
configured, otherwise input GPIOs configured for level IRQs are
misdetected as output GPIOs.

Fixes: ebd6651418b6 ("pinctrl: ingenic: Implement .get_direction for GPIO chips")
Reported-by: João Henrique <johnnyonflame@hotmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200622214548.265417-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 241e563d5814..a8d1b53ec4c1 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1958,7 +1958,8 @@ static int ingenic_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 	unsigned int pin = gc->base + offset;
 
 	if (jzpc->info->version >= ID_JZ4760) {
-		if (ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1))
+		if (ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_INT) ||
+		    ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1))
 			return GPIO_LINE_DIRECTION_IN;
 		return GPIO_LINE_DIRECTION_OUT;
 	}