All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yongqiang Niu <yongqiang.niu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Devicetree List <devicetree@vger.kernel.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
	lkml <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	"moderated list:ARM/Mediatek SoC support"
	<linux-mediatek@lists.infradead.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	CK Hu <ck.hu@mediatek.com>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2, 07/17] drm/mediatek: add disp config and mm 26mhz clock into mutex device
Date: Wed, 23 Dec 2020 09:23:49 +0800	[thread overview]
Message-ID: <1608686629.18252.8.camel@mhfsdcap03> (raw)
In-Reply-To: <CANMq1KCbmW4kbY5rbuogr9JJD5c5=-qatFs-EaWbuAxSzWmnLQ@mail.gmail.com>

On Tue, 2020-12-15 at 21:37 +0800, Nicolas Boichat wrote:
> On Sat, Dec 12, 2020 at 12:12 PM Yongqiang Niu
> <yongqiang.niu@mediatek.com> wrote:
> >
> > there are 2 more clock need enable for display.
> > parser these clock when mutex device probe,
> > enable and disable when mutex on/off
> >
> > Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 49 ++++++++++++++++++++++++++++------
> >  1 file changed, 41 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 60788c1..de618a1 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -118,7 +118,7 @@ struct mtk_ddp_data {
> >
> >  struct mtk_ddp {
> >         struct device                   *dev;
> > -       struct clk                      *clk;
> > +       struct clk                      *clk[3];
> >         void __iomem                    *regs;
> >         struct mtk_disp_mutex           mutex[10];
> >         const struct mtk_ddp_data       *data;
> > @@ -257,14 +257,39 @@ int mtk_disp_mutex_prepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       return clk_prepare_enable(ddp->clk);
> > +       int ret;
> > +       int i;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               ret = clk_prepare_enable(ddp->clk[i]);
> > +               if (ret) {
> > +                       pr_err("failed to enable clock, err %d. i:%d\n",
> > +                               ret, i);
> > +                       goto err;
> > +               }
> > +       }
> > +
> > +       return 0;
> > +
> > +err:
> > +       while (--i >= 0)
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       return ret;
> >  }
> >
> >  void mtk_disp_mutex_unprepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       clk_disable_unprepare(ddp->clk);
> > +       int i;
> > +
> > +        for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       }
> >  }
> >
> >  void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
> > @@ -415,11 +440,19 @@ static int mtk_ddp_probe(struct platform_device *pdev)
> >         ddp->data = of_device_get_match_data(dev);
> >
> >         if (!ddp->data->no_clk) {
> > -               ddp->clk = devm_clk_get(dev, NULL);
> > -               if (IS_ERR(ddp->clk)) {
> > -                       if (PTR_ERR(ddp->clk) != -EPROBE_DEFER)
> > -                               dev_err(dev, "Failed to get clock\n");
> > -                       return PTR_ERR(ddp->clk);
> > +               int ret;
> > +
> > +               for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +                       ddp->clk[i] = of_clk_get(dev->of_node, i);
> > +
> > +                       if (IS_ERR(ddp->clk[i])) {
> > +                               ret = PTR_ERR(ddp->clk[i]);
> > +                               if (ret != EPROBE_DEFER)
> > +                                       dev_err(dev, "Failed to get clock %d\n",
> > +                                               ret);
> > +
> > +                               return ret;
> > +                       }
> 
> Use of_clk_bulk_get_all instead?
> 
> ddp->num_clks = of_clk_bulk_get_all(dev->of_node, &ddp->clks);
> ...
> 
> Then the calls above can be clk_bulk_enable/clk_bulk_disable using
> num_clks and clks.
> 

will be fixed in next version
> 
> >                 }
> >         }
> >
> > --
> > 1.8.1.1.dirty
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Yongqiang Niu <yongqiang.niu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Devicetree List <devicetree@vger.kernel.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
	lkml <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	"moderated list:ARM/Mediatek SoC support"
	<linux-mediatek@lists.infradead.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	CK Hu <ck.hu@mediatek.com>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2, 07/17] drm/mediatek: add disp config and mm 26mhz clock into mutex device
Date: Wed, 23 Dec 2020 09:23:49 +0800	[thread overview]
Message-ID: <1608686629.18252.8.camel@mhfsdcap03> (raw)
In-Reply-To: <CANMq1KCbmW4kbY5rbuogr9JJD5c5=-qatFs-EaWbuAxSzWmnLQ@mail.gmail.com>

On Tue, 2020-12-15 at 21:37 +0800, Nicolas Boichat wrote:
> On Sat, Dec 12, 2020 at 12:12 PM Yongqiang Niu
> <yongqiang.niu@mediatek.com> wrote:
> >
> > there are 2 more clock need enable for display.
> > parser these clock when mutex device probe,
> > enable and disable when mutex on/off
> >
> > Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 49 ++++++++++++++++++++++++++++------
> >  1 file changed, 41 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 60788c1..de618a1 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -118,7 +118,7 @@ struct mtk_ddp_data {
> >
> >  struct mtk_ddp {
> >         struct device                   *dev;
> > -       struct clk                      *clk;
> > +       struct clk                      *clk[3];
> >         void __iomem                    *regs;
> >         struct mtk_disp_mutex           mutex[10];
> >         const struct mtk_ddp_data       *data;
> > @@ -257,14 +257,39 @@ int mtk_disp_mutex_prepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       return clk_prepare_enable(ddp->clk);
> > +       int ret;
> > +       int i;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               ret = clk_prepare_enable(ddp->clk[i]);
> > +               if (ret) {
> > +                       pr_err("failed to enable clock, err %d. i:%d\n",
> > +                               ret, i);
> > +                       goto err;
> > +               }
> > +       }
> > +
> > +       return 0;
> > +
> > +err:
> > +       while (--i >= 0)
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       return ret;
> >  }
> >
> >  void mtk_disp_mutex_unprepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       clk_disable_unprepare(ddp->clk);
> > +       int i;
> > +
> > +        for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       }
> >  }
> >
> >  void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
> > @@ -415,11 +440,19 @@ static int mtk_ddp_probe(struct platform_device *pdev)
> >         ddp->data = of_device_get_match_data(dev);
> >
> >         if (!ddp->data->no_clk) {
> > -               ddp->clk = devm_clk_get(dev, NULL);
> > -               if (IS_ERR(ddp->clk)) {
> > -                       if (PTR_ERR(ddp->clk) != -EPROBE_DEFER)
> > -                               dev_err(dev, "Failed to get clock\n");
> > -                       return PTR_ERR(ddp->clk);
> > +               int ret;
> > +
> > +               for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +                       ddp->clk[i] = of_clk_get(dev->of_node, i);
> > +
> > +                       if (IS_ERR(ddp->clk[i])) {
> > +                               ret = PTR_ERR(ddp->clk[i]);
> > +                               if (ret != EPROBE_DEFER)
> > +                                       dev_err(dev, "Failed to get clock %d\n",
> > +                                               ret);
> > +
> > +                               return ret;
> > +                       }
> 
> Use of_clk_bulk_get_all instead?
> 
> ddp->num_clks = of_clk_bulk_get_all(dev->of_node, &ddp->clks);
> ...
> 
> Then the calls above can be clk_bulk_enable/clk_bulk_disable using
> num_clks and clks.
> 

will be fixed in next version
> 
> >                 }
> >         }
> >
> > --
> > 1.8.1.1.dirty
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Yongqiang Niu <yongqiang.niu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>
Cc: CK Hu <ck.hu@mediatek.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	"Rob Herring" <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Devicetree List <devicetree@vger.kernel.org>,
	David Airlie <airlied@linux.ie>,
	lkml <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-mediatek@lists.infradead.org>,
	Daniel Vetter <daniel@ffwll.ch>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2, 07/17] drm/mediatek: add disp config and mm 26mhz clock into mutex device
Date: Wed, 23 Dec 2020 09:23:49 +0800	[thread overview]
Message-ID: <1608686629.18252.8.camel@mhfsdcap03> (raw)
In-Reply-To: <CANMq1KCbmW4kbY5rbuogr9JJD5c5=-qatFs-EaWbuAxSzWmnLQ@mail.gmail.com>

On Tue, 2020-12-15 at 21:37 +0800, Nicolas Boichat wrote:
> On Sat, Dec 12, 2020 at 12:12 PM Yongqiang Niu
> <yongqiang.niu@mediatek.com> wrote:
> >
> > there are 2 more clock need enable for display.
> > parser these clock when mutex device probe,
> > enable and disable when mutex on/off
> >
> > Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 49 ++++++++++++++++++++++++++++------
> >  1 file changed, 41 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 60788c1..de618a1 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -118,7 +118,7 @@ struct mtk_ddp_data {
> >
> >  struct mtk_ddp {
> >         struct device                   *dev;
> > -       struct clk                      *clk;
> > +       struct clk                      *clk[3];
> >         void __iomem                    *regs;
> >         struct mtk_disp_mutex           mutex[10];
> >         const struct mtk_ddp_data       *data;
> > @@ -257,14 +257,39 @@ int mtk_disp_mutex_prepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       return clk_prepare_enable(ddp->clk);
> > +       int ret;
> > +       int i;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               ret = clk_prepare_enable(ddp->clk[i]);
> > +               if (ret) {
> > +                       pr_err("failed to enable clock, err %d. i:%d\n",
> > +                               ret, i);
> > +                       goto err;
> > +               }
> > +       }
> > +
> > +       return 0;
> > +
> > +err:
> > +       while (--i >= 0)
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       return ret;
> >  }
> >
> >  void mtk_disp_mutex_unprepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       clk_disable_unprepare(ddp->clk);
> > +       int i;
> > +
> > +        for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       }
> >  }
> >
> >  void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
> > @@ -415,11 +440,19 @@ static int mtk_ddp_probe(struct platform_device *pdev)
> >         ddp->data = of_device_get_match_data(dev);
> >
> >         if (!ddp->data->no_clk) {
> > -               ddp->clk = devm_clk_get(dev, NULL);
> > -               if (IS_ERR(ddp->clk)) {
> > -                       if (PTR_ERR(ddp->clk) != -EPROBE_DEFER)
> > -                               dev_err(dev, "Failed to get clock\n");
> > -                       return PTR_ERR(ddp->clk);
> > +               int ret;
> > +
> > +               for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +                       ddp->clk[i] = of_clk_get(dev->of_node, i);
> > +
> > +                       if (IS_ERR(ddp->clk[i])) {
> > +                               ret = PTR_ERR(ddp->clk[i]);
> > +                               if (ret != EPROBE_DEFER)
> > +                                       dev_err(dev, "Failed to get clock %d\n",
> > +                                               ret);
> > +
> > +                               return ret;
> > +                       }
> 
> Use of_clk_bulk_get_all instead?
> 
> ddp->num_clks = of_clk_bulk_get_all(dev->of_node, &ddp->clks);
> ...
> 
> Then the calls above can be clk_bulk_enable/clk_bulk_disable using
> num_clks and clks.
> 

will be fixed in next version
> 
> >                 }
> >         }
> >
> > --
> > 1.8.1.1.dirty
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek


WARNING: multiple messages have this Message-ID (diff)
From: Yongqiang Niu <yongqiang.niu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Devicetree List <devicetree@vger.kernel.org>,
	David Airlie <airlied@linux.ie>,
	lkml <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	"moderated list:ARM/Mediatek SoC support"
	<linux-mediatek@lists.infradead.org>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2, 07/17] drm/mediatek: add disp config and mm 26mhz clock into mutex device
Date: Wed, 23 Dec 2020 09:23:49 +0800	[thread overview]
Message-ID: <1608686629.18252.8.camel@mhfsdcap03> (raw)
In-Reply-To: <CANMq1KCbmW4kbY5rbuogr9JJD5c5=-qatFs-EaWbuAxSzWmnLQ@mail.gmail.com>

On Tue, 2020-12-15 at 21:37 +0800, Nicolas Boichat wrote:
> On Sat, Dec 12, 2020 at 12:12 PM Yongqiang Niu
> <yongqiang.niu@mediatek.com> wrote:
> >
> > there are 2 more clock need enable for display.
> > parser these clock when mutex device probe,
> > enable and disable when mutex on/off
> >
> > Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 49 ++++++++++++++++++++++++++++------
> >  1 file changed, 41 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 60788c1..de618a1 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -118,7 +118,7 @@ struct mtk_ddp_data {
> >
> >  struct mtk_ddp {
> >         struct device                   *dev;
> > -       struct clk                      *clk;
> > +       struct clk                      *clk[3];
> >         void __iomem                    *regs;
> >         struct mtk_disp_mutex           mutex[10];
> >         const struct mtk_ddp_data       *data;
> > @@ -257,14 +257,39 @@ int mtk_disp_mutex_prepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       return clk_prepare_enable(ddp->clk);
> > +       int ret;
> > +       int i;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               ret = clk_prepare_enable(ddp->clk[i]);
> > +               if (ret) {
> > +                       pr_err("failed to enable clock, err %d. i:%d\n",
> > +                               ret, i);
> > +                       goto err;
> > +               }
> > +       }
> > +
> > +       return 0;
> > +
> > +err:
> > +       while (--i >= 0)
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       return ret;
> >  }
> >
> >  void mtk_disp_mutex_unprepare(struct mtk_disp_mutex *mutex)
> >  {
> >         struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
> >                                            mutex[mutex->id]);
> > -       clk_disable_unprepare(ddp->clk);
> > +       int i;
> > +
> > +        for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +               if (IS_ERR(ddp->clk[i]))
> > +                       continue;
> > +               clk_disable_unprepare(ddp->clk[i]);
> > +       }
> >  }
> >
> >  void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
> > @@ -415,11 +440,19 @@ static int mtk_ddp_probe(struct platform_device *pdev)
> >         ddp->data = of_device_get_match_data(dev);
> >
> >         if (!ddp->data->no_clk) {
> > -               ddp->clk = devm_clk_get(dev, NULL);
> > -               if (IS_ERR(ddp->clk)) {
> > -                       if (PTR_ERR(ddp->clk) != -EPROBE_DEFER)
> > -                               dev_err(dev, "Failed to get clock\n");
> > -                       return PTR_ERR(ddp->clk);
> > +               int ret;
> > +
> > +               for (i = 0; i < ARRAY_SIZE(ddp->clk); i++) {
> > +                       ddp->clk[i] = of_clk_get(dev->of_node, i);
> > +
> > +                       if (IS_ERR(ddp->clk[i])) {
> > +                               ret = PTR_ERR(ddp->clk[i]);
> > +                               if (ret != EPROBE_DEFER)
> > +                                       dev_err(dev, "Failed to get clock %d\n",
> > +                                               ret);
> > +
> > +                               return ret;
> > +                       }
> 
> Use of_clk_bulk_get_all instead?
> 
> ddp->num_clks = of_clk_bulk_get_all(dev->of_node, &ddp->clks);
> ...
> 
> Then the calls above can be clk_bulk_enable/clk_bulk_disable using
> num_clks and clks.
> 

will be fixed in next version
> 
> >                 }
> >         }
> >
> > --
> > 1.8.1.1.dirty
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-12-23  1:32 UTC|newest]

Thread overview: 156+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-12  4:11 [PATCH v2, 00/17] drm/mediatek: add support for mediatek SOC MT8192 Yongqiang Niu
2020-12-12  4:11 ` Yongqiang Niu
2020-12-12  4:11 ` Yongqiang Niu
2020-12-12  4:11 ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 01/17] dt-bindings: mediatek: add description for postmask Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-15 14:49   ` Chun-Kuang Hu
2020-12-15 14:49     ` Chun-Kuang Hu
2020-12-15 14:49     ` Chun-Kuang Hu
2020-12-15 14:49     ` Chun-Kuang Hu
2020-12-23  1:16     ` Yongqiang Niu
2020-12-23  1:16       ` Yongqiang Niu
2020-12-23  1:16       ` Yongqiang Niu
2020-12-23  1:16       ` Yongqiang Niu
2020-12-15 16:20   ` Rob Herring
2020-12-15 16:20     ` Rob Herring
2020-12-15 16:20     ` Rob Herring
2020-12-15 16:20     ` Rob Herring
2020-12-12  4:11 ` [PATCH v2, 02/17] dt-bindings: mediatek: add CLK_MM_DISP_CONFIG control description for mt8192 display Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-16 15:17   ` Chun-Kuang Hu
2020-12-16 15:17     ` Chun-Kuang Hu
2020-12-16 15:17     ` Chun-Kuang Hu
2020-12-16 15:17     ` Chun-Kuang Hu
2020-12-23  1:19     ` Yongqiang Niu
2020-12-23  1:19       ` Yongqiang Niu
2020-12-23  1:19       ` Yongqiang Niu
2020-12-23  1:19       ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 03/17] dt-bindings: mediatek: add " Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-13 15:58   ` Chun-Kuang Hu
2020-12-13 15:58     ` Chun-Kuang Hu
2020-12-13 15:58     ` Chun-Kuang Hu
2020-12-13 15:58     ` Chun-Kuang Hu
2020-12-15 16:23   ` Rob Herring
2020-12-15 16:23     ` Rob Herring
2020-12-15 16:23     ` Rob Herring
2020-12-15 16:23     ` Rob Herring
2020-12-12  4:11 ` [PATCH v2, 04/17] drm/mediatek: add component OVL_2L2 Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-13  1:15   ` Chun-Kuang Hu
2020-12-13  1:15     ` Chun-Kuang Hu
2020-12-13  1:15     ` Chun-Kuang Hu
2020-12-13  1:15     ` Chun-Kuang Hu
2020-12-23  1:21     ` Yongqiang Niu
2020-12-23  1:21       ` Yongqiang Niu
2020-12-23  1:21       ` Yongqiang Niu
2020-12-23  1:21       ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 05/17] drm/mediatek: add component POSTMASK Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 06/17] drm/mediatek: add component RDMA4 Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 07/17] drm/mediatek: add disp config and mm 26mhz clock into mutex device Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-15 13:37   ` Nicolas Boichat
2020-12-15 13:37     ` Nicolas Boichat
2020-12-15 13:37     ` Nicolas Boichat
2020-12-15 13:37     ` Nicolas Boichat
2020-12-23  1:23     ` Yongqiang Niu [this message]
2020-12-23  1:23       ` Yongqiang Niu
2020-12-23  1:23       ` Yongqiang Niu
2020-12-23  1:23       ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 08/17] drm/mediatek: enable OVL_LAYER_SMI_ID_EN for multi-layer usecase Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 09/17] drm/mediatek: check if fb is null Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 10/17] drm/mediatek: fix aal size config Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-16 15:10   ` Chun-Kuang Hu
2020-12-16 15:10     ` Chun-Kuang Hu
2020-12-16 15:10     ` Chun-Kuang Hu
2020-12-16 15:10     ` Chun-Kuang Hu
2020-12-23  1:36     ` Yongqiang Niu
2020-12-23  1:36       ` Yongqiang Niu
2020-12-23  1:36       ` Yongqiang Niu
2020-12-23  1:36       ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 11/17] drm/mediatek: fix dither " Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 12/17] drm/mediatek: fix gamma " Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-14 23:40   ` Chun-Kuang Hu
2020-12-14 23:40     ` Chun-Kuang Hu
2020-12-14 23:40     ` Chun-Kuang Hu
2020-12-14 23:40     ` Chun-Kuang Hu
2020-12-23  1:37     ` Yongqiang Niu
2020-12-23  1:37       ` Yongqiang Niu
2020-12-23  1:37       ` Yongqiang Niu
2020-12-23  1:37       ` Yongqiang Niu
2020-12-23 15:48       ` Chun-Kuang Hu
2020-12-23 15:48         ` Chun-Kuang Hu
2020-12-23 15:48         ` Chun-Kuang Hu
2020-12-23 15:48         ` Chun-Kuang Hu
2020-12-12  4:11 ` [PATCH v2, 13/17] drm/mediatek: fix ccorr " Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 14/17] soc: mediatek: mmsys: Use function call for setting mmsys ovl mout register Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-15 13:42   ` Nicolas Boichat
2020-12-15 13:42     ` Nicolas Boichat
2020-12-15 13:42     ` Nicolas Boichat
2020-12-15 13:42     ` Nicolas Boichat
2020-12-23  1:41     ` Yongqiang Niu
2020-12-23  1:41       ` Yongqiang Niu
2020-12-23  1:41       ` Yongqiang Niu
2020-12-23  1:41       ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 15/17] soc: mediatek: mmsys: add mt8192 mmsys support Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-13 16:02   ` Chun-Kuang Hu
2020-12-13 16:02     ` Chun-Kuang Hu
2020-12-13 16:02     ` Chun-Kuang Hu
2020-12-13 16:02     ` Chun-Kuang Hu
2020-12-14  0:39     ` Yongqiang Niu
2020-12-14  0:39       ` Yongqiang Niu
2020-12-14  0:39       ` Yongqiang Niu
2020-12-14  0:39       ` Yongqiang Niu
2020-12-15 14:44       ` Chun-Kuang Hu
2020-12-15 14:44         ` Chun-Kuang Hu
2020-12-15 14:44         ` Chun-Kuang Hu
2020-12-15 14:44         ` Chun-Kuang Hu
2020-12-12  4:11 ` [PATCH v2, 16/17] drm/mediatek: add support for mediatek SOC MT8192 Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11 ` [PATCH v2, 17/17] arm64: dts: mt8192: add display node Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu
2020-12-12  4:11   ` Yongqiang Niu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1608686629.18252.8.camel@mhfsdcap03 \
    --to=yongqiang.niu@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=ck.hu@mediatek.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=drinkcat@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.