All of lore.kernel.org
 help / color / mirror / Atom feed
From: CK Hu <ck.hu@mediatek.com>
To: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Philipp Zabel <p.zabel@pengutronix.de>,
	David Airlie <airlied@linux.ie>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	Daniel Vetter <daniel@ffwll.ch>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v12 6/8] drm/mediatek: enable dither function
Date: Fri, 29 Jan 2021 09:33:02 +0800	[thread overview]
Message-ID: <1611883982.5226.12.camel@mtksdaap41> (raw)
In-Reply-To: <20210128112314.1304160-7-hsinyi@chromium.org>

Hi, Hsin-Yi:

On Thu, 2021-01-28 at 19:23 +0800, Hsin-Yi Wang wrote:
> From: Yongqiang Niu <yongqiang.niu@mediatek.com>
> 
> for 5 or 6 bpc panel, we need enable dither function
> to improve the display quality
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index ac2cb25620357..6c8f246380a74 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -53,6 +53,7 @@
>  #define DITHER_EN				BIT(0)
>  #define DISP_DITHER_CFG				0x0020
>  #define DITHER_RELAY_MODE			BIT(0)
> +#define DITHER_ENGINE_EN			BIT(1)
>  #define DISP_DITHER_SIZE			0x0030
>  
>  #define LUT_10BIT_MASK				0x03ff
> @@ -314,9 +315,19 @@ static void mtk_dither_config(struct device *dev, unsigned int w,
>  			      unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
>  {
>  	struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> +	bool enable = (bpc == 5 || bpc == 6);

I strongly believe that dither function in dither is identical to the
one in gamma and od, and in mtk_dither_set_common(), 'bpc >=
MTK_MIN_BPC' is valid, so I believe we need not to limit bpc to 5 or 6.
But we should consider the case that bpc is invalid in
mtk_dither_set_common(). Invalid case in gamma and od use different way
to process. For gamma, dither is default relay mode, so invalid bpc
would do nothing in mtk_dither_set_common() and result in relay mode.
For od, it set to relay mode first, them invalid bpc would do nothing in
mtk_dither_set_common() and result in relay mode. I would like dither,
gamma and od to process invalid bpc in the same way. One solution is to
set relay mode in mtk_dither_set_common() for invalid bpc.

Regards,
CK

>  
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE);
> -	mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> +	if (enable) {
> +		mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
> +				      DISP_DITHER_CFG, DITHER_ENGINE_EN,
> +				      cmdq_pkt);
> +	} else {
> +		mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
> +			      priv->regs, DISP_DITHER_CFG);
> +	}
> +
> +	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> +		      DISP_DITHER_SIZE);
>  }
>  
>  static void mtk_dither_start(struct device *dev)

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Philipp Zabel <p.zabel@pengutronix.de>,
	David Airlie <airlied@linux.ie>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	Daniel Vetter <daniel@ffwll.ch>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v12 6/8] drm/mediatek: enable dither function
Date: Fri, 29 Jan 2021 09:33:02 +0800	[thread overview]
Message-ID: <1611883982.5226.12.camel@mtksdaap41> (raw)
In-Reply-To: <20210128112314.1304160-7-hsinyi@chromium.org>

Hi, Hsin-Yi:

On Thu, 2021-01-28 at 19:23 +0800, Hsin-Yi Wang wrote:
> From: Yongqiang Niu <yongqiang.niu@mediatek.com>
> 
> for 5 or 6 bpc panel, we need enable dither function
> to improve the display quality
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index ac2cb25620357..6c8f246380a74 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -53,6 +53,7 @@
>  #define DITHER_EN				BIT(0)
>  #define DISP_DITHER_CFG				0x0020
>  #define DITHER_RELAY_MODE			BIT(0)
> +#define DITHER_ENGINE_EN			BIT(1)
>  #define DISP_DITHER_SIZE			0x0030
>  
>  #define LUT_10BIT_MASK				0x03ff
> @@ -314,9 +315,19 @@ static void mtk_dither_config(struct device *dev, unsigned int w,
>  			      unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
>  {
>  	struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> +	bool enable = (bpc == 5 || bpc == 6);

I strongly believe that dither function in dither is identical to the
one in gamma and od, and in mtk_dither_set_common(), 'bpc >=
MTK_MIN_BPC' is valid, so I believe we need not to limit bpc to 5 or 6.
But we should consider the case that bpc is invalid in
mtk_dither_set_common(). Invalid case in gamma and od use different way
to process. For gamma, dither is default relay mode, so invalid bpc
would do nothing in mtk_dither_set_common() and result in relay mode.
For od, it set to relay mode first, them invalid bpc would do nothing in
mtk_dither_set_common() and result in relay mode. I would like dither,
gamma and od to process invalid bpc in the same way. One solution is to
set relay mode in mtk_dither_set_common() for invalid bpc.

Regards,
CK

>  
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE);
> -	mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> +	if (enable) {
> +		mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
> +				      DISP_DITHER_CFG, DITHER_ENGINE_EN,
> +				      cmdq_pkt);
> +	} else {
> +		mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
> +			      priv->regs, DISP_DITHER_CFG);
> +	}
> +
> +	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> +		      DISP_DITHER_SIZE);
>  }
>  
>  static void mtk_dither_start(struct device *dev)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Mark Rutland <mark.rutland@arm.com>,
	<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>
Subject: Re: [PATCH v12 6/8] drm/mediatek: enable dither function
Date: Fri, 29 Jan 2021 09:33:02 +0800	[thread overview]
Message-ID: <1611883982.5226.12.camel@mtksdaap41> (raw)
In-Reply-To: <20210128112314.1304160-7-hsinyi@chromium.org>

Hi, Hsin-Yi:

On Thu, 2021-01-28 at 19:23 +0800, Hsin-Yi Wang wrote:
> From: Yongqiang Niu <yongqiang.niu@mediatek.com>
> 
> for 5 or 6 bpc panel, we need enable dither function
> to improve the display quality
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index ac2cb25620357..6c8f246380a74 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -53,6 +53,7 @@
>  #define DITHER_EN				BIT(0)
>  #define DISP_DITHER_CFG				0x0020
>  #define DITHER_RELAY_MODE			BIT(0)
> +#define DITHER_ENGINE_EN			BIT(1)
>  #define DISP_DITHER_SIZE			0x0030
>  
>  #define LUT_10BIT_MASK				0x03ff
> @@ -314,9 +315,19 @@ static void mtk_dither_config(struct device *dev, unsigned int w,
>  			      unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
>  {
>  	struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> +	bool enable = (bpc == 5 || bpc == 6);

I strongly believe that dither function in dither is identical to the
one in gamma and od, and in mtk_dither_set_common(), 'bpc >=
MTK_MIN_BPC' is valid, so I believe we need not to limit bpc to 5 or 6.
But we should consider the case that bpc is invalid in
mtk_dither_set_common(). Invalid case in gamma and od use different way
to process. For gamma, dither is default relay mode, so invalid bpc
would do nothing in mtk_dither_set_common() and result in relay mode.
For od, it set to relay mode first, them invalid bpc would do nothing in
mtk_dither_set_common() and result in relay mode. I would like dither,
gamma and od to process invalid bpc in the same way. One solution is to
set relay mode in mtk_dither_set_common() for invalid bpc.

Regards,
CK

>  
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE);
> -	mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> +	if (enable) {
> +		mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
> +				      DISP_DITHER_CFG, DITHER_ENGINE_EN,
> +				      cmdq_pkt);
> +	} else {
> +		mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
> +			      priv->regs, DISP_DITHER_CFG);
> +	}
> +
> +	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> +		      DISP_DITHER_SIZE);
>  }
>  
>  static void mtk_dither_start(struct device *dev)


WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v12 6/8] drm/mediatek: enable dither function
Date: Fri, 29 Jan 2021 09:33:02 +0800	[thread overview]
Message-ID: <1611883982.5226.12.camel@mtksdaap41> (raw)
In-Reply-To: <20210128112314.1304160-7-hsinyi@chromium.org>

Hi, Hsin-Yi:

On Thu, 2021-01-28 at 19:23 +0800, Hsin-Yi Wang wrote:
> From: Yongqiang Niu <yongqiang.niu@mediatek.com>
> 
> for 5 or 6 bpc panel, we need enable dither function
> to improve the display quality
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index ac2cb25620357..6c8f246380a74 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -53,6 +53,7 @@
>  #define DITHER_EN				BIT(0)
>  #define DISP_DITHER_CFG				0x0020
>  #define DITHER_RELAY_MODE			BIT(0)
> +#define DITHER_ENGINE_EN			BIT(1)
>  #define DISP_DITHER_SIZE			0x0030
>  
>  #define LUT_10BIT_MASK				0x03ff
> @@ -314,9 +315,19 @@ static void mtk_dither_config(struct device *dev, unsigned int w,
>  			      unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
>  {
>  	struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> +	bool enable = (bpc == 5 || bpc == 6);

I strongly believe that dither function in dither is identical to the
one in gamma and od, and in mtk_dither_set_common(), 'bpc >=
MTK_MIN_BPC' is valid, so I believe we need not to limit bpc to 5 or 6.
But we should consider the case that bpc is invalid in
mtk_dither_set_common(). Invalid case in gamma and od use different way
to process. For gamma, dither is default relay mode, so invalid bpc
would do nothing in mtk_dither_set_common() and result in relay mode.
For od, it set to relay mode first, them invalid bpc would do nothing in
mtk_dither_set_common() and result in relay mode. I would like dither,
gamma and od to process invalid bpc in the same way. One solution is to
set relay mode in mtk_dither_set_common() for invalid bpc.

Regards,
CK

>  
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE);
> -	mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> +	if (enable) {
> +		mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
> +				      DISP_DITHER_CFG, DITHER_ENGINE_EN,
> +				      cmdq_pkt);
> +	} else {
> +		mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
> +			      priv->regs, DISP_DITHER_CFG);
> +	}
> +
> +	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> +		      DISP_DITHER_SIZE);
>  }
>  
>  static void mtk_dither_start(struct device *dev)

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2021-01-29  1:33 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-28 11:23 [PATCH v12 0/8] drm/mediatek: add support for mediatek SOC MT8183 Hsin-Yi Wang
2021-01-28 11:23 ` Hsin-Yi Wang
2021-01-28 11:23 ` Hsin-Yi Wang
2021-01-28 11:23 ` Hsin-Yi Wang
2021-01-28 11:23 ` [PATCH v12 1/8] arm64: dts: mt8183: rename rdma fifo size Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 16:31   ` Matthias Brugger
2021-01-28 16:31     ` Matthias Brugger
2021-01-28 16:31     ` Matthias Brugger
2021-01-28 16:31     ` Matthias Brugger
2021-01-28 11:23 ` [PATCH v12 2/8] arm64: dts: mt8183: refine gamma compatible name Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 16:33   ` Matthias Brugger
2021-01-28 16:33     ` Matthias Brugger
2021-01-28 16:33     ` Matthias Brugger
2021-01-28 16:33     ` Matthias Brugger
2021-01-28 11:23 ` [PATCH v12 3/8] drm/mediatek: add mtk_dither_set_common() function Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23 ` [PATCH v12 4/8] drm/mediatek: separate gamma module Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23 ` [PATCH v12 5/8] drm/mediatek: add has_dither private data for gamma Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23 ` [PATCH v12 6/8] drm/mediatek: enable dither function Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-29  1:33   ` CK Hu [this message]
2021-01-29  1:33     ` CK Hu
2021-01-29  1:33     ` CK Hu
2021-01-29  1:33     ` CK Hu
2021-01-29  6:24     ` Hsin-Yi Wang
2021-01-29  6:24       ` Hsin-Yi Wang
2021-01-29  6:24       ` Hsin-Yi Wang
2021-01-29  6:24       ` Hsin-Yi Wang
2021-01-29  6:30       ` Yongqiang Niu
2021-01-29  6:30         ` Yongqiang Niu
2021-01-29  6:30         ` Yongqiang Niu
2021-01-29  6:30         ` Yongqiang Niu
2021-01-29  6:46         ` Hsin-Yi Wang
2021-01-29  6:46           ` Hsin-Yi Wang
2021-01-29  6:46           ` Hsin-Yi Wang
2021-01-29  6:46           ` Hsin-Yi Wang
2021-01-29  7:42           ` Yongqiang Niu
2021-01-29  7:42             ` Yongqiang Niu
2021-01-29  7:42             ` Yongqiang Niu
2021-01-29  7:42             ` Yongqiang Niu
2021-01-29  7:59             ` Hsin-Yi Wang
2021-01-29  7:59               ` Hsin-Yi Wang
2021-01-29  7:59               ` Hsin-Yi Wang
2021-01-29  7:59               ` Hsin-Yi Wang
2021-01-28 11:23 ` [PATCH v12 7/8] soc: mediatek: add mtk mutex support for MT8183 Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-29  1:11   ` CK Hu
2021-01-29  1:11     ` CK Hu
2021-01-29  1:11     ` CK Hu
2021-01-29  1:11     ` CK Hu
2021-01-28 11:23 ` [PATCH v12 8/8] drm/mediatek: add support for mediatek SOC MT8183 Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang
2021-01-28 11:23   ` Hsin-Yi Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1611883982.5226.12.camel@mtksdaap41 \
    --to=ck.hu@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hsinyi@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=yongqiang.niu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.