From: Kiran Gunda <kgunda@codeaurora.org>
To: bjorn.andersson@linaro.org, jingoohan1@gmail.com,
lee.jones@linaro.org, b.zolnierkie@samsung.com,
dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org,
jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org,
mark.rutland@arm.com, linux-leds@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: phone-devel@vger.kernel.org, Kiran Gunda <kgunda@codeaurora.org>
Subject: [PATCH V1 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5
Date: Wed, 24 Feb 2021 09:20:47 +0530 [thread overview]
Message-ID: <1614138648-2963-2-git-send-email-kgunda@codeaurora.org> (raw)
In-Reply-To: <1614138648-2963-1-git-send-email-kgunda@codeaurora.org>
Currently, for WLED5, after FSC register update MOD_SYNC_BIT
is toggled instead of SYNC_BIT. MOD_SYNC_BIT has to be toggled
after the brightness update and SYNC_BIT has to be toggled after
FSC update for WLED5. Fix it.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
drivers/video/backlight/qcom-wled.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3bc7800..aef52b9 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -348,7 +348,7 @@ static int wled3_sync_toggle(struct wled *wled)
return rc;
}
-static int wled5_sync_toggle(struct wled *wled)
+static int wled5_mod_sync_toggle(struct wled *wled)
{
int rc;
u8 val;
@@ -445,10 +445,23 @@ static int wled_update_status(struct backlight_device *bl)
goto unlock_mutex;
}
- rc = wled->wled_sync_toggle(wled);
- if (rc < 0) {
- dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
- goto unlock_mutex;
+ if (wled->version < 5) {
+ rc = wled->wled_sync_toggle(wled);
+ if (rc < 0) {
+ dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+ goto unlock_mutex;
+ }
+ } else {
+ /*
+ * For WLED5 toggling the MOD_SYNC_BIT updates the
+ * brightness
+ */
+ rc = wled5_mod_sync_toggle(wled);
+ if (rc < 0) {
+ dev_err(wled->dev, "wled mod sync failed rc:%d\n",
+ rc);
+ goto unlock_mutex;
+ }
}
}
@@ -1459,7 +1472,7 @@ static int wled_configure(struct wled *wled)
size = ARRAY_SIZE(wled5_opts);
*cfg = wled5_config_defaults;
wled->wled_set_brightness = wled5_set_brightness;
- wled->wled_sync_toggle = wled5_sync_toggle;
+ wled->wled_sync_toggle = wled3_sync_toggle;
wled->wled_cabc_config = wled5_cabc_config;
wled->wled_ovp_delay = wled5_ovp_delay;
wled->wled_auto_detection_required =
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Kiran Gunda <kgunda@codeaurora.org>
To: bjorn.andersson@linaro.org, jingoohan1@gmail.com,
lee.jones@linaro.org, b.zolnierkie@samsung.com,
dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org,
jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org,
mark.rutland@arm.com, linux-leds@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: phone-devel@vger.kernel.org, Kiran Gunda <kgunda@codeaurora.org>
Subject: [PATCH V1 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5
Date: Wed, 24 Feb 2021 09:20:47 +0530 [thread overview]
Message-ID: <1614138648-2963-2-git-send-email-kgunda@codeaurora.org> (raw)
In-Reply-To: <1614138648-2963-1-git-send-email-kgunda@codeaurora.org>
Currently, for WLED5, after FSC register update MOD_SYNC_BIT
is toggled instead of SYNC_BIT. MOD_SYNC_BIT has to be toggled
after the brightness update and SYNC_BIT has to be toggled after
FSC update for WLED5. Fix it.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
drivers/video/backlight/qcom-wled.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3bc7800..aef52b9 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -348,7 +348,7 @@ static int wled3_sync_toggle(struct wled *wled)
return rc;
}
-static int wled5_sync_toggle(struct wled *wled)
+static int wled5_mod_sync_toggle(struct wled *wled)
{
int rc;
u8 val;
@@ -445,10 +445,23 @@ static int wled_update_status(struct backlight_device *bl)
goto unlock_mutex;
}
- rc = wled->wled_sync_toggle(wled);
- if (rc < 0) {
- dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
- goto unlock_mutex;
+ if (wled->version < 5) {
+ rc = wled->wled_sync_toggle(wled);
+ if (rc < 0) {
+ dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+ goto unlock_mutex;
+ }
+ } else {
+ /*
+ * For WLED5 toggling the MOD_SYNC_BIT updates the
+ * brightness
+ */
+ rc = wled5_mod_sync_toggle(wled);
+ if (rc < 0) {
+ dev_err(wled->dev, "wled mod sync failed rc:%d\n",
+ rc);
+ goto unlock_mutex;
+ }
}
}
@@ -1459,7 +1472,7 @@ static int wled_configure(struct wled *wled)
size = ARRAY_SIZE(wled5_opts);
*cfg = wled5_config_defaults;
wled->wled_set_brightness = wled5_set_brightness;
- wled->wled_sync_toggle = wled5_sync_toggle;
+ wled->wled_sync_toggle = wled3_sync_toggle;
wled->wled_cabc_config = wled5_cabc_config;
wled->wled_ovp_delay = wled5_ovp_delay;
wled->wled_auto_detection_required =
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-02-24 3:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-24 3:50 [PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings Kiran Gunda
2021-02-24 3:50 ` Kiran Gunda
2021-02-24 3:50 ` Kiran Gunda [this message]
2021-02-24 3:50 ` [PATCH V1 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5 Kiran Gunda
2021-02-24 11:15 ` Daniel Thompson
2021-02-24 11:15 ` Daniel Thompson
2021-02-26 6:31 ` kgunda
2021-02-26 6:31 ` kgunda
2021-02-24 3:50 ` [PATCH V1 2/2] backlight: qcom-wled: Correct the sync_toggle sequence Kiran Gunda
2021-02-24 3:50 ` Kiran Gunda
2021-02-24 11:26 ` Daniel Thompson
2021-02-24 11:26 ` Daniel Thompson
2021-02-26 6:40 ` kgunda
2021-02-26 6:40 ` kgunda
-- strict thread matches above, loose matches on Subject: below --
2021-02-19 14:07 [PATCH V1 0/2] Fix WLED FSC Sync and brightness Sync settings Kiran Gunda
2021-02-19 14:07 ` [PATCH V1 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5 Kiran Gunda
2021-02-19 14:07 ` Kiran Gunda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1614138648-2963-2-git-send-email-kgunda@codeaurora.org \
--to=kgunda@codeaurora.org \
--cc=agross@kernel.org \
--cc=b.zolnierkie@samsung.com \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.thompson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jacek.anaszewski@gmail.com \
--cc=jingoohan1@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pavel@ucw.cz \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.