[v8 4/6] drm/panel-simple: Update validation warnings for eDP panel description

[Rajeev Nandan <rajeevny@codeaurora.org>]

Do not give a warning for the eDP panels if the "bus_format" is
not specified, since most eDP panels can support more than one
bus formats and this can be auto-detected.
Also, update the check to include bpc=10 for the eDP panel.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
---

Changes in v8:
- New patch, to address the review comments of Sam Ravnborg [1]

[1] https://lore.kernel.org/dri-devel/20210621184157.GB918146@ravnborg.org/

 drivers/gpu/drm/panel/panel-simple.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 86e5a45..f966b562 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -772,10 +772,8 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
 			desc->bpc != 8);
 		break;
 	case DRM_MODE_CONNECTOR_eDP:
-		if (desc->bus_format == 0)
-			dev_warn(dev, "Specify missing bus_format\n");
-		if (desc->bpc != 6 && desc->bpc != 8)
-			dev_warn(dev, "Expected bpc in {6,8} but got: %u\n", desc->bpc);
+		if (desc->bpc != 6 && desc->bpc != 8 && desc->bpc != 10)
+			dev_warn(dev, "Expected bpc in {6,8,10} but got: %u\n", desc->bpc);
 		break;
 	case DRM_MODE_CONNECTOR_DSI:
 		if (desc->bpc != 6 && desc->bpc != 8)
-- 
2.7.4